commit 5bb3c84a1185766460e392fe31ff8882f989c66b Author: Greg Kroah-Hartman Date: Mon Aug 19 05:33:54 2024 +0200 Linux 5.4.282 Link: https://lore.kernel.org/r/20240815131902.779125794@linuxfoundation.org Tested-by: Florian Fainelli Link: https://lore.kernel.org/r/20240816095317.548866608@linuxfoundation.org Tested-by: Jon Hunter Tested-by: Florian Fainelli Tested-by: Linux Kernel Functional Testing Tested-by: Harshit Mogalapalli Signed-off-by: Greg Kroah-Hartman commit 2f2f3c6a4d46749807628f62fd505c7226bb9762 Author: Sean Young Date: Thu Aug 8 10:35:19 2024 +0200 media: Revert "media: dvb-usb: Fix unexpected infinite loop in dvb_usb_read_remote_control()" commit 0c84bde4f37ba27d50e4c70ecacd33fe4a57030d upstream. This reverts commit 2052138b7da52ad5ccaf74f736d00f39a1c9198c. This breaks the TeVii s480 dual DVB-S2 S660. The device has a bulk in endpoint but no corresponding out endpoint, so the device does not pass the "has both receive and send bulk endpoint" test. Seemingly this device does not use dvb_usb_generic_rw() so I have tried removing the generic_bulk_ctrl_endpoint entry, but this resulted in different problems. As we have no explanation yet, revert. $ dmesg | grep -i -e dvb -e dw21 -e usb\ 4 [ 0.999122] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.023123] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 1.130247] usb 1-1: New USB device found, idVendor=9022, idProduct=d482, +bcdDevice= 0.01 [ 1.130257] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.152323] usb 4-1: New USB device found, idVendor=9022, idProduct=d481, +bcdDevice= 0.01 [ 1.152329] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.701033] dvb-usb: found a 'TeVii S480.2 USB' in cold state, will try to +load a firmware [ 6.701178] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw' [ 6.701179] dw2102: start downloading DW210X firmware [ 6.703715] dvb-usb: found a 'Microsoft Xbox One Digital TV Tuner' in cold +state, will try to load a firmware [ 6.703974] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' [ 6.756432] usb 1-1: USB disconnect, device number 2 [ 6.862119] dvb-usb: found a 'TeVii S480.2 USB' in warm state. [ 6.862194] dvb-usb: TeVii S480.2 USB error while loading driver (-22) [ 6.862209] dvb-usb: found a 'TeVii S480.1 USB' in cold state, will try to +load a firmware [ 6.862244] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw' [ 6.862245] dw2102: start downloading DW210X firmware [ 6.914811] usb 4-1: USB disconnect, device number 2 [ 7.014131] dvb-usb: found a 'TeVii S480.1 USB' in warm state. [ 7.014487] dvb-usb: TeVii S480.1 USB error while loading driver (-22) [ 7.014538] usbcore: registered new interface driver dw2102 Closes: https://lore.kernel.org/stable/20240801165146.38991f60@mir/ Fixes: 2052138b7da5 ("media: dvb-usb: Fix unexpected infinite loop in dvb_usb_read_remote_control()") Reported-by: Stefan Lippers-Hollmann Cc: stable@vger.kernel.org Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit e7765ad4b47d71944e6d8d05f66071f715b75e88 Author: Michael Walle Date: Mon Jun 17 11:13:29 2024 +0200 ARM: dts: imx6qdl-kontron-samx6i: fix phy-mode commit 0df3c7d7a73d75153090637392c0b73a63cdc24a upstream. The i.MX6 cannot add any RGMII delays. The PHY has to add both the RX and TX delays on the RGMII interface. Fix the interface mode. While at it, use the new phy-connection-type property name. Fixes: 5694eed98cca ("ARM: dts: imx6qdl-kontron-samx6i: move phy reset into phy-node") Signed-off-by: Michael Walle Signed-off-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman commit dc1d852277d34fcbf4462cf5b8b64b991cfa7cf0 Author: WangYuli Date: Mon Jul 15 17:31:44 2024 +0800 nvme/pci: Add APST quirk for Lenovo N60z laptop commit ab091ec536cb7b271983c0c063b17f62f3591583 upstream. There is a hardware power-saving problem with the Lenovo N60z board. When turn it on and leave it for 10 hours, there is a 20% chance that a nvme disk will not wake up until reboot. Link: https://lore.kernel.org/all/2B5581C46AC6E335+9c7a81f1-05fb-4fd0-9fbb-108757c21628@uniontech.com Signed-off-by: hmy Signed-off-by: Wentao Guan Signed-off-by: WangYuli Signed-off-by: Keith Busch Signed-off-by: Greg Kroah-Hartman commit 368f6985d46657b8b466a421dddcacd4051f7ada Author: Kees Cook Date: Thu Aug 8 11:39:08 2024 -0700 exec: Fix ToCToU between perm check and set-uid/gid usage commit f50733b45d865f91db90919f8311e2127ce5a0cb upstream. When opening a file for exec via do_filp_open(), permission checking is done against the file's metadata at that moment, and on success, a file pointer is passed back. Much later in the execve() code path, the file metadata (specifically mode, uid, and gid) is used to determine if/how to set the uid and gid. However, those values may have changed since the permissions check, meaning the execution may gain unintended privileges. For example, if a file could change permissions from executable and not set-id: ---------x 1 root root 16048 Aug 7 13:16 target to set-id and non-executable: ---S------ 1 root root 16048 Aug 7 13:16 target it is possible to gain root privileges when execution should have been disallowed. While this race condition is rare in real-world scenarios, it has been observed (and proven exploitable) when package managers are updating the setuid bits of installed programs. Such files start with being world-executable but then are adjusted to be group-exec with a set-uid bit. For example, "chmod o-x,u+s target" makes "target" executable only by uid "root" and gid "cdrom", while also becoming setuid-root: -rwxr-xr-x 1 root cdrom 16048 Aug 7 13:16 target becomes: -rwsr-xr-- 1 root cdrom 16048 Aug 7 13:16 target But racing the chmod means users without group "cdrom" membership can get the permission to execute "target" just before the chmod, and when the chmod finishes, the exec reaches brpm_fill_uid(), and performs the setuid to root, violating the expressed authorization of "only cdrom group members can setuid to root". Re-check that we still have execute permissions in case the metadata has changed. It would be better to keep a copy from the perm-check time, but until we can do that refactoring, the least-bad option is to do a full inode_permission() call (under inode lock). It is understood that this is safe against dead-locks, but hardly optimal. Reported-by: Marco Vanotti Tested-by: Marco Vanotti Suggested-by: Linus Torvalds Cc: stable@vger.kernel.org Cc: Eric Biederman Cc: Alexander Viro Cc: Christian Brauner Signed-off-by: Kees Cook Signed-off-by: Greg Kroah-Hartman commit fdf2b10bafa087657e232570aa77b9fc89646b02 Author: Yunke Cao Date: Thu Jul 7 10:53:31 2022 +0200 media: uvcvideo: Use entity get_cur in uvc_ctrl_set commit 5f36851c36b30f713f588ed2b60aa7b4512e2c76 upstream. Entity controls should get_cur using an entity-defined function instead of via a query. Fix this in uvc_ctrl_set. Fixes: 65900c581d01 ("media: uvcvideo: Allow entity-defined get_info and get_cur") Signed-off-by: Yunke Cao Reviewed-by: Ricardo Ribalda Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit f6a745c5580821569cef454cab52a2b7acaccd2a Author: Amit Daniel Kachhap Date: Thu Nov 3 13:52:32 2022 +0530 arm64: cpufeature: Fix the visibility of compat hwcaps commit 85f1506337f0c79a4955edfeee86a18628e3735f upstream. Commit 237405ebef58 ("arm64: cpufeature: Force HWCAP to be based on the sysreg visible to user-space") forced the hwcaps to use sanitised user-space view of the id registers. However, the ID register structures used to select few compat cpufeatures (vfp, crc32, ...) are masked and hence such hwcaps do not appear in /proc/cpuinfo anymore for PER_LINUX32 personality. Add the ID register structures explicitly and set the relevant entry as visible. As these ID registers are now of type visible so make them available in 64-bit userspace by making necessary changes in register emulation logic and documentation. While at it, update the comment for structure ftr_generic_32bits[] which lists the ID register that use it. Fixes: 237405ebef58 ("arm64: cpufeature: Force HWCAP to be based on the sysreg visible to user-space") Cc: Suzuki K Poulose Reviewed-by: James Morse Signed-off-by: Amit Daniel Kachhap Link: https://lore.kernel.org/r/20221103082232.19189-1-amit.kachhap@arm.com Signed-off-by: Catalin Marinas Signed-off-by: Greg Kroah-Hartman commit a256d019eaf044864c7e50312f0a65b323c24f39 Author: Andi Shyti Date: Fri Aug 2 10:38:50 2024 +0200 drm/i915/gem: Fix Virtual Memory mapping boundaries calculation commit 8bdd9ef7e9b1b2a73e394712b72b22055e0e26c3 upstream. Calculating the size of the mapped area as the lesser value between the requested size and the actual size does not consider the partial mapping offset. This can cause page fault access. Fix the calculation of the starting and ending addresses, the total size is now deduced from the difference between the end and start addresses. Additionally, the calculations have been rewritten in a clearer and more understandable form. Fixes: c58305af1835 ("drm/i915: Use remap_io_mapping() to prefault all PTE in a single pass") Reported-by: Jann Horn Co-developed-by: Chris Wilson Signed-off-by: Chris Wilson Signed-off-by: Andi Shyti Cc: Joonas Lahtinen Cc: Matthew Auld Cc: Rodrigo Vivi Cc: # v4.9+ Reviewed-by: Jann Horn Reviewed-by: Jonathan Cavitt [Joonas: Add Requires: tag] Requires: 60a2066c5005 ("drm/i915/gem: Adjust vma offset for framebuffer mmap offset") Signed-off-by: Joonas Lahtinen Link: https://patchwork.freedesktop.org/patch/msgid/20240802083850.103694-3-andi.shyti@linux.intel.com (cherry picked from commit 97b6784753da06d9d40232328efc5c5367e53417) Signed-off-by: Joonas Lahtinen Signed-off-by: Greg Kroah-Hartman commit cd4348e0a50286282c314ad6d2b0740e7c812c24 Author: Florian Westphal Date: Mon Aug 12 12:28:48 2024 +0200 netfilter: nf_tables: prefer nft_chain_validate commit cff3bd012a9512ac5ed858d38e6ed65f6391008c upstream. nft_chain_validate already performs loop detection because a cycle will result in a call stack overflow (ctx->level >= NFT_JUMP_STACK_SIZE). It also follows maps via ->validate callback in nft_lookup, so there appears no reason to iterate the maps again. nf_tables_check_loops() and all its helper functions can be removed. This improves ruleset load time significantly, from 23s down to 12s. This also fixes a crash bug. Old loop detection code can result in unbounded recursion: BUG: TASK stack guard page was hit at .... Oops: stack guard page: 0000 [#1] PREEMPT SMP KASAN CPU: 4 PID: 1539 Comm: nft Not tainted 6.10.0-rc5+ #1 [..] with a suitable ruleset during validation of register stores. I can't see any actual reason to attempt to check for this from nft_validate_register_store(), at this point the transaction is still in progress, so we don't have a full picture of the rule graph. For nf-next it might make sense to either remove it or make this depend on table->validate_state in case we could catch an error earlier (for improved error reporting to userspace). Fixes: 20a69341f2d0 ("netfilter: nf_tables: add netlink set API") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit eaf1a29ea5d7dba8e84e9e9f3b3f47d0cd540bfe Author: Pablo Neira Ayuso Date: Mon Aug 12 12:28:47 2024 +0200 netfilter: nf_tables: use timestamp to check for set element timeout commit 7395dfacfff65e9938ac0889dafa1ab01e987d15 upstream Add a timestamp field at the beginning of the transaction, store it in the nftables per-netns area. Update set backend .insert, .deactivate and sync gc path to use the timestamp, this avoids that an element expires while control plane transaction is still unfinished. .lookup and .update, which are used from packet path, still use the current time to check if the element has expired. And .get path and dump also since this runs lockless under rcu read size lock. Then, there is async gc which also needs to check the current time since it runs asynchronously from a workqueue. [ NB: rbtree GC updates has been excluded because GC is asynchronous. ] Fixes: c3e1b005ed1c ("netfilter: nf_tables: add set element timeout support") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit cb56f8f06a7a0c1797a9ad2c41937edf32d797d8 Author: Pablo Neira Ayuso Date: Mon Aug 12 12:28:46 2024 +0200 netfilter: nf_tables: set element extended ACK reporting support commit b53c116642502b0c85ecef78bff4f826a7dd4145 upstream. Report the element that causes problems via netlink extended ACK for set element commands. Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 53174ce02d2fa9a7f5002055e765ddd021db4bb9 Author: Nathan Chancellor Date: Fri Jul 26 11:05:00 2024 -0700 kbuild: Fix '-S -c' in x86 stack protector scripts commit 3415b10a03945b0da4a635e146750dfe5ce0f448 upstream. After a recent change in clang to stop consuming all instances of '-S' and '-c' [1], the stack protector scripts break due to the kernel's use of -Werror=unused-command-line-argument to catch cases where flags are not being properly consumed by the compiler driver: $ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument] This results in CONFIG_STACKPROTECTOR getting disabled because CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set. '-c' and '-S' both instruct the compiler to stop at different stages of the pipeline ('-S' after compiling, '-c' after assembling), so having them present together in the same command makes little sense. In this case, the test wants to stop before assembling because it is looking at the textual assembly output of the compiler for either '%fs' or '%gs', so remove '-c' from the list of arguments to resolve the error. All versions of GCC continue to work after this change, along with versions of clang that do or do not contain the change mentioned above. Cc: stable@vger.kernel.org Fixes: 4f7fd4d7a791 ("[PATCH] Add the -fstack-protector option to the CFLAGS") Fixes: 60a5317ff0f4 ("x86: implement x86_32 stack protector") Link: https://github.com/llvm/llvm-project/commit/6461e537815f7fa68cef06842505353cf5600e9c [1] Signed-off-by: Nathan Chancellor Signed-off-by: Masahiro Yamada [nathan: Fixed conflict in 32-bit version due to lack of 3fb0fdb3bbe7] Signed-off-by: Nathan Chancellor Signed-off-by: Greg Kroah-Hartman commit af3948929b10ec39f185192c25fc81d8c61714bf Author: Jari Ruusu Date: Fri Jul 26 09:53:18 2024 +0000 Fix gcc 4.9 build issue in 5.4.y Some older systems still compile kernels with old gcc version. These warnings and errors show up when compiling with gcc 4.9.2 error: "__GCC4_has_attribute___uninitialized__" is not defined [-Werror=undef] Upstream won't need this because newer kernels are not compilable with gcc 4.9. Subject: gcc-4.9 warning/error fix for 5.10.223-rc1 Fixes: fd7eea27a3ae ("Compiler Attributes: Add __uninitialized macro") Signed-off-by: Jari Ruusu Signed-off-by: Greg Kroah-Hartman commit c7a28cb079a8d5b076c2abc43bf2595a9487b5b6 Author: Thomas Zimmermann Date: Mon May 13 14:51:06 2024 +0200 drm/mgag200: Set DDC timeout in milliseconds commit ecde5db1598aecab54cc392282c15114f526f05f upstream. Compute the i2c timeout in jiffies from a value in milliseconds. The original values of 2 jiffies equals 2 milliseconds if HZ has been configured to a value of 1000. This corresponds to 2.2 milliseconds used by most other DRM drivers. Update mgag200 accordingly. Signed-off-by: Thomas Zimmermann Reviewed-by: Jocelyn Falempe Fixes: 414c45310625 ("mgag200: initial g200se driver (v2)") Cc: Dave Airlie Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: Thomas Zimmermann Cc: Jocelyn Falempe Cc: dri-devel@lists.freedesktop.org Cc: # v3.5+ Link: https://patchwork.freedesktop.org/patch/msgid/20240513125620.6337-2-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman commit ca75fa4ff895992208ca0b9ae8c05b6dac6a27b2 Author: Lucas Stach Date: Mon Mar 18 21:39:23 2024 +0100 drm/bridge: analogix_dp: properly handle zero sized AUX transactions commit e82290a2e0e8ec5e836ecad1ca025021b3855c2d upstream. Address only transactions without any data are valid and should not be flagged as short transactions. Simply return the message size when no transaction errors occured. CC: stable@vger.kernel.org Signed-off-by: Lucas Stach Reviewed-by: Robert Foss Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20240318203925.2837689-1-l.stach@pengutronix.de Signed-off-by: Greg Kroah-Hartman commit 06c1de44d378ec5439db17bf476507d68589bfe9 Author: Andi Kleen Date: Wed Aug 7 17:02:44 2024 -0700 x86/mtrr: Check if fixed MTRRs exist before saving them commit 919f18f961c03d6694aa726c514184f2311a4614 upstream. MTRRs have an obsolete fixed variant for fine grained caching control of the 640K-1MB region that uses separate MSRs. This fixed variant has a separate capability bit in the MTRR capability MSR. So far all x86 CPUs which support MTRR have this separate bit set, so it went unnoticed that mtrr_save_state() does not check the capability bit before accessing the fixed MTRR MSRs. Though on a CPU that does not support the fixed MTRR capability this results in a #GP. The #GP itself is harmless because the RDMSR fault is handled gracefully, but results in a WARN_ON(). Add the missing capability check to prevent this. Fixes: 2b1f6278d77c ("[PATCH] x86: Save the MTRRs of the BSP before booting an AP") Signed-off-by: Andi Kleen Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20240808000244.946864-1-ak@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit d3e4dbc2858fe85d1dbd2e72a9fc5dea988b5c18 Author: Tze-nan Wu Date: Mon Aug 5 13:59:22 2024 +0800 tracing: Fix overflow in get_free_elt() commit bcf86c01ca4676316557dd482c8416ece8c2e143 upstream. "tracing_map->next_elt" in get_free_elt() is at risk of overflowing. Once it overflows, new elements can still be inserted into the tracing_map even though the maximum number of elements (`max_elts`) has been reached. Continuing to insert elements after the overflow could result in the tracing_map containing "tracing_map->max_size" elements, leaving no empty entries. If any attempt is made to insert an element into a full tracing_map using `__tracing_map_insert()`, it will cause an infinite loop with preemption disabled, leading to a CPU hang problem. Fix this by preventing any further increments to "tracing_map->next_elt" once it reaches "tracing_map->max_elt". Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Fixes: 08d43a5fa063e ("tracing: Add lock-free tracing_map") Co-developed-by: Cheng-Jui Wang Link: https://lore.kernel.org/20240805055922.6277-1-Tze-nan.Wu@mediatek.com Signed-off-by: Cheng-Jui Wang Signed-off-by: Tze-nan Wu Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman commit f8fe71c64923f2dfe18a8968f32168a20277be00 Author: Hans de Goede Date: Wed Jul 17 22:03:33 2024 +0200 power: supply: axp288_charger: Round constant_charge_voltage writes down commit 81af7f2342d162e24ac820c10e68684d9f927663 upstream. Round constant_charge_voltage writes down to the first supported lower value, rather then rounding them up to the first supported higher value. This fixes e.g. writing 4250000 resulting in a value of 4350000 which might be dangerous, instead writing 4250000 will now result in a safe 4200000 value. Fixes: 843735b788a4 ("power: axp288_charger: axp288 charger driver") Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20240717200333.56669-2-hdegoede@redhat.com Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman commit 1031a0e7c2934b1704f460533b2db1548966e8d1 Author: Hans de Goede Date: Wed Jul 17 22:03:32 2024 +0200 power: supply: axp288_charger: Fix constant_charge_voltage writes commit b34ce4a59cfe9cd0d6f870e6408e8ec88a964585 upstream. info->max_cv is in millivolts, divide the microvolt value being written to constant_charge_voltage by 1000 *before* clamping it to info->max_cv. Before this fix the code always tried to set constant_charge_voltage to max_cv / 1000 = 4 millivolt, which ends up in setting it to 4.1V which is the lowest supported value. Fixes: 843735b788a4 ("power: axp288_charger: axp288 charger driver") Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20240717200333.56669-1-hdegoede@redhat.com Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman commit da18145e7dd4365099ba143802cd8e5dda85d801 Author: Shay Drory Date: Tue Aug 6 10:20:44 2024 +0300 genirq/irqdesc: Honor caller provided affinity in alloc_desc() commit edbbaae42a56f9a2b39c52ef2504dfb3fb0a7858 upstream. Currently, whenever a caller is providing an affinity hint for an interrupt, the allocation code uses it to calculate the node and copies the cpumask into irq_desc::affinity. If the affinity for the interrupt is not marked 'managed' then the startup of the interrupt ignores irq_desc::affinity and uses the system default affinity mask. Prevent this by setting the IRQD_AFFINITY_SET flag for the interrupt in the allocator, which causes irq_setup_affinity() to use irq_desc::affinity on interrupt startup if the mask contains an online CPU. [ tglx: Massaged changelog ] Fixes: 45ddcecbfa94 ("genirq: Use affinity hint in irqdesc allocation") Signed-off-by: Shay Drory Signed-off-by: Thomas Gleixner Cc: Link: https://lore.kernel.org/all/20240806072044.837827-1-shayd@nvidia.com Signed-off-by: Greg Kroah-Hartman commit 55b2a5d331a6ceb1c4372945fdb77181265ba24f Author: George Kennedy Date: Wed Jul 17 07:24:38 2024 -0500 serial: core: check uartclk for zero to avoid divide by zero commit 6eabce6608d6f3440f4c03aa3d3ef50a47a3d193 upstream. Calling ioctl TIOCSSERIAL with an invalid baud_base can result in uartclk being zero, which will result in a divide by zero error in uart_get_divisor(). The check for uartclk being zero in uart_set_info() needs to be done before other settings are made as subsequent calls to ioctl TIOCSSERIAL for the same port would be impacted if the uartclk check was done where uartclk gets set. Oops: divide error: 0000 PREEMPT SMP KASAN PTI RIP: 0010:uart_get_divisor (drivers/tty/serial/serial_core.c:580) Call Trace: serial8250_get_divisor (drivers/tty/serial/8250/8250_port.c:2576 drivers/tty/serial/8250/8250_port.c:2589) serial8250_do_set_termios (drivers/tty/serial/8250/8250_port.c:502 drivers/tty/serial/8250/8250_port.c:2741) serial8250_set_termios (drivers/tty/serial/8250/8250_port.c:2862) uart_change_line_settings (./include/linux/spinlock.h:376 ./include/linux/serial_core.h:608 drivers/tty/serial/serial_core.c:222) uart_port_startup (drivers/tty/serial/serial_core.c:342) uart_startup (drivers/tty/serial/serial_core.c:368) uart_set_info (drivers/tty/serial/serial_core.c:1034) uart_set_info_user (drivers/tty/serial/serial_core.c:1059) tty_set_serial (drivers/tty/tty_io.c:2637) tty_ioctl (drivers/tty/tty_io.c:2647 drivers/tty/tty_io.c:2791) __x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:907 fs/ioctl.c:893 fs/ioctl.c:893) do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Reported-by: syzkaller Cc: stable@vger.kernel.org Signed-off-by: George Kennedy Rule: add Link: https://lore.kernel.org/stable/1721148848-9784-1-git-send-email-george.kennedy%40oracle.com Link: https://lore.kernel.org/r/1721219078-3209-1-git-send-email-george.kennedy@oracle.com Signed-off-by: Greg Kroah-Hartman commit 881058e07b8bbb20906ec1c38b83716b909700ae Author: Damien Le Moal Date: Fri Jul 19 16:39:12 2024 +0900 scsi: mpt3sas: Avoid IOMMU page faults on REPORT ZONES [ Upstream commit 82dbb57ac8d06dfe8227ba9ab11a49de2b475ae5 ] Some firmware versions of the 9600 series SAS HBA byte-swap the REPORT ZONES command reply buffer from ATA-ZAC devices by directly accessing the buffer in the host memory. This does not respect the default command DMA direction and causes IOMMU page faults on architectures with an IOMMU enforcing write-only mappings for DMA_FROM_DEVICE DMA driection (e.g. AMD hosts). scsi 18:0:0:0: Direct-Access-ZBC ATA WDC WSH722020AL W870 PQ: 0 ANSI: 6 scsi 18:0:0:0: SATA: handle(0x0027), sas_addr(0x300062b2083e7c40), phy(0), device_name(0x5000cca29dc35e11) scsi 18:0:0:0: enclosure logical id (0x300062b208097c40), slot(0) scsi 18:0:0:0: enclosure level(0x0000), connector name( C0.0) scsi 18:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) scsi 18:0:0:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1) sd 18:0:0:0: Attached scsi generic sg2 type 20 sd 18:0:0:0: [sdc] Host-managed zoned block device mpt3sas 0000:41:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0xfff9b200 flags=0x0050] mpt3sas 0000:41:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0xfff9b300 flags=0x0050] mpt3sas_cm0: mpt3sas_ctl_pre_reset_handler: Releasing the trace buffer due to adapter reset. mpt3sas_cm0 fault info from func: mpt3sas_base_make_ioc_ready mpt3sas_cm0: fault_state(0x2666)! mpt3sas_cm0: sending diag reset !! mpt3sas_cm0: diag reset: SUCCESS sd 18:0:0:0: [sdc] REPORT ZONES start lba 0 failed sd 18:0:0:0: [sdc] REPORT ZONES: Result: hostbyte=DID_RESET driverbyte=DRIVER_OK sd 18:0:0:0: [sdc] 0 4096-byte logical blocks: (0 B/0 B) Avoid such issue by always mapping the buffer of REPORT ZONES commands using DMA_BIDIRECTIONAL (read+write IOMMU mapping). This is done by introducing the helper function _base_scsi_dma_map() and using this helper in _base_build_sg_scmd() and _base_build_sg_scmd_ieee() instead of calling directly scsi_dma_map(). Fixes: 471ef9d4e498 ("mpt3sas: Build MPI SGL LIST on GEN2 HBAs and IEEE SGL LIST on GEN3 HBAs") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20240719073913.179559-3-dlemoal@kernel.org Reviewed-by: Christoph Hellwig Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 12608528f55ddb9449a905f6ac509ea9b01bf924 Author: Sreekanth Reddy Date: Thu Mar 3 19:32:03 2022 +0530 scsi: mpt3sas: Remove scsi_dma_map() error messages [ Upstream commit 0c25422d34b4726b2707d5f38560943155a91b80 ] When scsi_dma_map() fails by returning a sges_left value less than zero, the amount of logging produced can be extremely high. In a recent end-user environment, 1200 messages per second were being sent to the log buffer. This eventually overwhelmed the system and it stalled. These error messages are not needed. Remove them. Link: https://lore.kernel.org/r/20220303140203.12642-1-sreekanth.reddy@broadcom.com Suggested-by: Christoph Hellwig Signed-off-by: Sreekanth Reddy Signed-off-by: Martin K. Petersen Stable-dep-of: 82dbb57ac8d0 ("scsi: mpt3sas: Avoid IOMMU page faults on REPORT ZONES") Signed-off-by: Sasha Levin commit 3f16bc776b2fc41e58b1f0ba80e2a97ba048945e Author: Justin Stitt Date: Fri May 17 00:47:10 2024 +0000 ntp: Safeguard against time_constant overflow commit 06c03c8edce333b9ad9c6b207d93d3a5ae7c10c0 upstream. Using syzkaller with the recently reintroduced signed integer overflow sanitizer produces this UBSAN report: UBSAN: signed-integer-overflow in ../kernel/time/ntp.c:738:18 9223372036854775806 + 4 cannot be represented in type 'long' Call Trace: handle_overflow+0x171/0x1b0 __do_adjtimex+0x1236/0x1440 do_adjtimex+0x2be/0x740 The user supplied time_constant value is incremented by four and then clamped to the operating range. Before commit eea83d896e31 ("ntp: NTP4 user space bits update") the user supplied value was sanity checked to be in the operating range. That change removed the sanity check and relied on clamping after incrementing which does not work correctly when the user supplied value is in the overflow zone of the '+ 4' operation. The operation requires CAP_SYS_TIME and the side effect of the overflow is NTP getting out of sync. Similar to the fixups for time_maxerror and time_esterror, clamp the user space supplied value to the operating range. [ tglx: Switch to clamping ] Fixes: eea83d896e31 ("ntp: NTP4 user space bits update") Signed-off-by: Justin Stitt Signed-off-by: Thomas Gleixner Cc: Miroslav Lichvar Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20240517-b4-sio-ntp-c-v2-1-f3a80096f36f@google.com Closes: https://github.com/KSPP/linux/issues/352 Signed-off-by: Greg Kroah-Hartman commit dd98c9630b7ee273da87e9a244f94ddf947161e2 Author: Dan Williams Date: Fri Jul 12 12:42:09 2024 -0700 driver core: Fix uevent_show() vs driver detach race commit 15fffc6a5624b13b428bb1c6e9088e32a55eb82c upstream. uevent_show() wants to de-reference dev->driver->name. There is no clean way for a device attribute to de-reference dev->driver unless that attribute is defined via (struct device_driver).dev_groups. Instead, the anti-pattern of taking the device_lock() in the attribute handler risks deadlocks with code paths that remove device attributes while holding the lock. This deadlock is typically invisible to lockdep given the device_lock() is marked lockdep_set_novalidate_class(), but some subsystems allocate a local lockdep key for @dev->mutex to reveal reports of the form: ====================================================== WARNING: possible circular locking dependency detected 6.10.0-rc7+ #275 Tainted: G OE N ------------------------------------------------------ modprobe/2374 is trying to acquire lock: ffff8c2270070de0 (kn->active#6){++++}-{0:0}, at: __kernfs_remove+0xde/0x220 but task is already holding lock: ffff8c22016e88f8 (&cxl_root_key){+.+.}-{3:3}, at: device_release_driver_internal+0x39/0x210 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&cxl_root_key){+.+.}-{3:3}: __mutex_lock+0x99/0xc30 uevent_show+0xac/0x130 dev_attr_show+0x18/0x40 sysfs_kf_seq_show+0xac/0xf0 seq_read_iter+0x110/0x450 vfs_read+0x25b/0x340 ksys_read+0x67/0xf0 do_syscall_64+0x75/0x190 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (kn->active#6){++++}-{0:0}: __lock_acquire+0x121a/0x1fa0 lock_acquire+0xd6/0x2e0 kernfs_drain+0x1e9/0x200 __kernfs_remove+0xde/0x220 kernfs_remove_by_name_ns+0x5e/0xa0 device_del+0x168/0x410 device_unregister+0x13/0x60 devres_release_all+0xb8/0x110 device_unbind_cleanup+0xe/0x70 device_release_driver_internal+0x1c7/0x210 driver_detach+0x47/0x90 bus_remove_driver+0x6c/0xf0 cxl_acpi_exit+0xc/0x11 [cxl_acpi] __do_sys_delete_module.isra.0+0x181/0x260 do_syscall_64+0x75/0x190 entry_SYSCALL_64_after_hwframe+0x76/0x7e The observation though is that driver objects are typically much longer lived than device objects. It is reasonable to perform lockless de-reference of a @driver pointer even if it is racing detach from a device. Given the infrequency of driver unregistration, use synchronize_rcu() in module_remove_driver() to close any potential races. It is potentially overkill to suffer synchronize_rcu() just to handle the rare module removal racing uevent_show() event. Thanks to Tetsuo Handa for the debug analysis of the syzbot report [1]. Fixes: c0a40097f0bc ("drivers: core: synchronize really_probe() and dev_uevent()") Reported-by: syzbot+4762dd74e32532cda5ff@syzkaller.appspotmail.com Reported-by: Tetsuo Handa Closes: http://lore.kernel.org/5aa5558f-90a4-4864-b1b1-5d6784c5607d@I-love.SAKURA.ne.jp [1] Link: http://lore.kernel.org/669073b8ea479_5fffa294c1@dwillia2-xfh.jf.intel.com.notmuch Cc: stable@vger.kernel.org Cc: Ashish Sangwan Cc: Namjae Jeon Cc: Dirk Behme Cc: Greg Kroah-Hartman Cc: Rafael J. Wysocki Signed-off-by: Dan Williams Link: https://lore.kernel.org/r/172081332794.577428.9738802016494057132.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Greg Kroah-Hartman commit 5cd98f82eca74a17927f5946a5d3cf943e3500b3 Author: Justin Stitt Date: Fri May 17 20:22:44 2024 +0000 ntp: Clamp maxerror and esterror to operating range [ Upstream commit 87d571d6fb77ec342a985afa8744bb9bb75b3622 ] Using syzkaller alongside the newly reintroduced signed integer overflow sanitizer spits out this report: UBSAN: signed-integer-overflow in ../kernel/time/ntp.c:461:16 9223372036854775807 + 500 cannot be represented in type 'long' Call Trace: handle_overflow+0x171/0x1b0 second_overflow+0x2d6/0x500 accumulate_nsecs_to_secs+0x60/0x160 timekeeping_advance+0x1fe/0x890 update_wall_time+0x10/0x30 time_maxerror is unconditionally incremented and the result is checked against NTP_PHASE_LIMIT, but the increment itself can overflow, resulting in wrap-around to negative space. Before commit eea83d896e31 ("ntp: NTP4 user space bits update") the user supplied value was sanity checked to be in the operating range. That change removed the sanity check and relied on clamping in handle_overflow() which does not work correctly when the user supplied value is in the overflow zone of the '+ 500' operation. The operation requires CAP_SYS_TIME and the side effect of the overflow is NTP getting out of sync. Miroslav confirmed that the input value should be clamped to the operating range and the same applies to time_esterror. The latter is not used by the kernel, but the value still should be in the operating range as it was before the sanity check got removed. Clamp them to the operating range. [ tglx: Changed it to clamping and included time_esterror ] Fixes: eea83d896e31 ("ntp: NTP4 user space bits update") Signed-off-by: Justin Stitt Signed-off-by: Thomas Gleixner Cc: Miroslav Lichvar Link: https://lore.kernel.org/all/20240517-b4-sio-ntp-usec-v2-1-d539180f2b79@google.com Closes: https://github.com/KSPP/linux/issues/354 Signed-off-by: Sasha Levin [ cast things to long long to fix compiler warnings - gregkh ] Signed-off-by: Greg Kroah-Hartman commit f91fb47ecacc178a83a77eeebd25cbaec18c01d6 Author: Thomas Gleixner Date: Wed Jul 31 12:23:51 2024 +0200 tick/broadcast: Move per CPU pointer access into the atomic section commit 6881e75237a84093d0986f56223db3724619f26e upstream. The recent fix for making the take over of the broadcast timer more reliable retrieves a per CPU pointer in preemptible context. This went unnoticed as compilers hoist the access into the non-preemptible region where the pointer is actually used. But of course it's valid that the compiler keeps it at the place where the code puts it which rightfully triggers: BUG: using smp_processor_id() in preemptible [00000000] code: caller is hotplug_cpu__broadcast_tick_pull+0x1c/0xc0 Move it to the actual usage site which is in a non-preemptible region. Fixes: f7d43dd206e7 ("tick/broadcast: Make takeover of broadcast hrtimer reliable") Reported-by: David Wang <00107082@163.com> Signed-off-by: Thomas Gleixner Tested-by: Yu Liao Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/87ttg56ers.ffs@tglx Signed-off-by: Greg Kroah-Hartman commit 8f783731e3738f62d37c077c9df28e505b81943b Author: Vamshi Gajjela Date: Wed Jul 24 19:21:26 2024 +0530 scsi: ufs: core: Fix hba->last_dme_cmd_tstamp timestamp updating logic commit ab9fd06cb8f0db0854291833fc40c789e43a361f upstream. The ufshcd_add_delay_before_dme_cmd() always introduces a delay of MIN_DELAY_BEFORE_DME_CMDS_US between DME commands even when it's not required. The delay is added when the UFS host controller supplies the quirk UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS. Fix the logic to update hba->last_dme_cmd_tstamp to ensure subsequent DME commands have the correct delay in the range of 0 to MIN_DELAY_BEFORE_DME_CMDS_US. Update the timestamp at the end of the function to ensure it captures the latest time after any necessary delay has been applied. Signed-off-by: Vamshi Gajjela Link: https://lore.kernel.org/r/20240724135126.1786126-1-vamshigajjela@google.com Fixes: cad2e03d8607 ("ufs: add support to allow non standard behaviours (quirks)") Cc: stable@vger.kernel.org Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit df8e734ae5e605348aa0ca2498aedb73e815f244 Author: Chris Wulff Date: Wed Jul 24 21:04:20 2024 -0400 usb: gadget: core: Check for unset descriptor commit 973a57891608a98e894db2887f278777f564de18 upstream. Make sure the descriptor has been set before looking at maxpacket. This fixes a null pointer panic in this case. This may happen if the gadget doesn't properly set up the endpoint for the current speed, or the gadget descriptors are malformed and the descriptor for the speed/endpoint are not found. No current gadget driver is known to have this problem, but this may cause a hard-to-find bug during development of new gadgets. Fixes: 54f83b8c8ea9 ("USB: gadget: Reject endpoints with 0 maxpacket value") Cc: stable@vger.kernel.org Signed-off-by: Chris Wulff Link: https://lore.kernel.org/r/20240725010419.314430-2-crwulff@gmail.com Signed-off-by: Greg Kroah-Hartman commit 55bb086ce92cb4639f3ea72015360ab3cbe211c1 Author: Marek Marczykowski-Górecki Date: Mon Jul 15 12:44:53 2024 +0200 USB: serial: debug: do not echo input by default commit 00af4f3dda1461ec90d892edc10bec6d3c50c554 upstream. This driver is intended as a "client" end of the console connection. When connected to a host it's supposed to receive debug logs, and possibly allow to interact with whatever debug console is available there. Feeding messages back, depending on a configuration may cause log messages be executed as shell commands (which can be really bad if one is unlucky, imagine a log message like "prevented running `rm -rf /home`"). In case of Xen, it exposes sysrq-like debug interface, and feeding it its own logs will pretty quickly hit 'R' for "instant reboot". Contrary to a classic serial console, the USB one cannot be configured ahead of time, as the device shows up only when target OS is up. And at the time device is opened to execute relevant ioctl, it's already too late, especially when logs start flowing shortly after device is initialized. Avoid the issue by changing default to no echo for this type of devices. Signed-off-by: Marek Marczykowski-Górecki [ johan: amend summary; disable also ECHONL ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 9c3746ce8d8fcb3a2405644fc0eec7fc5312de80 Author: Oliver Neukum Date: Tue Jul 9 13:38:41 2024 +0200 usb: vhci-hcd: Do not drop references before new references are gained commit afdcfd3d6fcdeca2735ca8d994c5f2d24a368f0a upstream. At a few places the driver carries stale pointers to references that can still be used. Make sure that does not happen. This strictly speaking closes ZDI-CAN-22273, though there may be similar races in the driver. Signed-off-by: Oliver Neukum Cc: stable Acked-by: Shuah Khan Link: https://lore.kernel.org/r/20240709113851.14691-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman commit 85f06d9634b7dfaca4d30a58ae18713f6bc7b684 Author: Takashi Iwai Date: Tue Aug 6 08:49:16 2024 +0200 ALSA: hda/hdmi: Yet more pin fix for HP EliteDesk 800 G4 commit 176fd1511dd9086ab4fa9323cb232177c6235288 upstream. HP EliteDesk 800 G4 (PCI SSID 103c:83e2) is another Kabylake machine where BIOS misses the HDMI pin initializations. Add the quirk entry. Cc: Link: https://patch.msgid.link/20240806064918.11132-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 3c540f420026eacc8a4ff5d9790e6fdf20ae8610 Author: Steven 'Steve' Kendall Date: Tue Aug 6 00:08:24 2024 +0000 ALSA: hda: Add HP MP9 G4 Retail System AMS to force connect list commit 7e1e206b99f4b3345aeb49d94584a420b7887f1d upstream. In recent HP UEFI firmware (likely v2.15 and above, tested on 2.27), these pins are incorrectly set for HDMI/DP audio. Tested on HP MP9 G4 Retail System AMS. Tested audio with two monitors connected via DisplayPort. Link: https://forum.manjaro.org/t/intel-cannon-lake-pch-cavs-conexant-cx20632-no-sound-at-hdmi-or-displayport/133494 Link: https://bbs.archlinux.org/viewtopic.php?id=270523 Signed-off-by: Steven 'Steve' Kendall Cc: Link: https://patch.msgid.link/20240806-hdmi-audio-hp-wrongpins-v2-1-d9eb4ad41043@chromium.org Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 40f3d5cb0e0cbf7fa697913a27d5d361373bdcf5 Author: Takashi Iwai Date: Mon Aug 5 15:01:28 2024 +0200 ALSA: line6: Fix racy access to midibuf commit 15b7a03205b31bc5623378c190d22b7ff60026f1 upstream. There can be concurrent accesses to line6 midibuf from both the URB completion callback and the rawmidi API access. This could be a cause of KMSAN warning triggered by syzkaller below (so put as reported-by here). This patch protects the midibuf call of the former code path with a spinlock for avoiding the possible races. Reported-by: syzbot+78eccfb8b3c9a85fc6c5@syzkaller.appspotmail.com Closes: https://lore.kernel.org/00000000000000949c061df288c5@google.com Cc: Link: https://patch.msgid.link/20240805130129.10872-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 24ddda932c43ffe156c7f3c568bed85131c63ae6 Author: Ma Ke Date: Fri Aug 2 12:47:36 2024 +0800 drm/client: fix null pointer dereference in drm_client_modeset_probe commit 113fd6372a5bb3689aba8ef5b8a265ed1529a78f upstream. In drm_client_modeset_probe(), the return value of drm_mode_duplicate() is assigned to modeset->mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. Cc: stable@vger.kernel.org Fixes: cf13909aee05 ("drm/fb-helper: Move out modeset config code") Signed-off-by: Ma Ke Reviewed-by: Thomas Zimmermann Signed-off-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20240802044736.1570345-1-make24@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman commit 2c99fd57623c586bffebc4b6cb5ee40eb0641c8c Author: Stefan Wahren Date: Sun Aug 4 13:36:11 2024 +0200 spi: spi-fsl-lpspi: Fix scldiv calculation [ Upstream commit 730bbfaf7d4890bd99e637db7767dc68cfeb24e7 ] The effective SPI clock frequency should never exceed speed_hz otherwise this might result in undefined behavior of the SPI device. Currently the scldiv calculation could violate this constraint. For the example parameters perclk_rate = 24 MHz and speed_hz = 7 MHz, the function fsl_lpspi_set_bitrate will determine perscale = 0 and scldiv = 1, which is a effective SPI clock of 8 MHz. So fix this by rounding up the quotient of perclk_rate and speed_hz. While this never change within the loop, we can pull this out. Fixes: 5314987de5e5 ("spi: imx: add lpspi bus driver") Signed-off-by: Stefan Wahren Link: https://patch.msgid.link/20240804113611.83613-1-wahrenst@gmx.net Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 3a5e84e6e492afa634f364964bff903ed7b80fde Author: Oleksandr Suvorov Date: Thu Feb 20 14:11:48 2020 +0000 spi: fsl-lpspi: remove unneeded array [ Upstream commit 2fa98705a9289c758b6154a22174aa8d4041a285 ] - replace the array with the shift operation - remove the extra comparing operation. Signed-off-by: Oleksandr Suvorov Link: https://lore.kernel.org/r/20200220141143.3902922-2-oleksandr.suvorov@toradex.com Signed-off-by: Mark Brown Stable-dep-of: 730bbfaf7d48 ("spi: spi-fsl-lpspi: Fix scldiv calculation") Signed-off-by: Sasha Levin commit abc71a9915911127e7e6a8478737f99161b64e87 Author: Menglong Dong Date: Mon Aug 5 14:01:21 2024 +0900 bpf: kprobe: remove unused declaring of bpf_kprobe_override [ Upstream commit 0e8b53979ac86eddb3fd76264025a70071a25574 ] After the commit 66665ad2f102 ("tracing/kprobe: bpf: Compare instruction pointer with original one"), "bpf_kprobe_override" is not used anywhere anymore, and we can remove it now. Link: https://lore.kernel.org/all/20240710085939.11520-1-dongml2@chinatelecom.cn/ Fixes: 66665ad2f102 ("tracing/kprobe: bpf: Compare instruction pointer with original one") Signed-off-by: Menglong Dong Acked-by: Jiri Olsa Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Sasha Levin commit 6082250cca36c75aed04df62492878df40bd2dba Author: Guenter Roeck Date: Tue Jul 30 07:19:41 2024 -0700 i2c: smbus: Send alert notifications to all devices if source not found [ Upstream commit f6c29f710c1ff2590109f83be3e212b86c01e0f3 ] If a SMBus alert is received and the originating device is not found, the reason may be that the address reported on the SMBus alert address is corrupted, for example because multiple devices asserted alert and do not correctly implement SMBus arbitration. If this happens, call alert handlers on all devices connected to the given I2C bus, in the hope that this cleans up the situation. This change reliably fixed the problem on a system with multiple devices on a single bus. Example log where the device on address 0x18 (ADM1021) and on address 0x4c (ADT7461A) both had the alert line asserted: smbus_alert 3-000c: SMBALERT# from dev 0x0c, flag 0 smbus_alert 3-000c: no driver alert()! smbus_alert 3-000c: SMBALERT# from dev 0x0c, flag 0 smbus_alert 3-000c: no driver alert()! lm90 3-0018: temp1 out of range, please check! lm90 3-0018: Disabling ALERT# lm90 3-0029: Everything OK lm90 3-002a: Everything OK lm90 3-004c: temp1 out of range, please check! lm90 3-004c: temp2 out of range, please check! lm90 3-004c: Disabling ALERT# Fixes: b5527a7766f0 ("i2c: Add SMBus alert support") Signed-off-by: Guenter Roeck [wsa: fixed a typo in the commit message] Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit 54abe030dfc0a037bc5c78de875a598b7bd1febd Author: Guenter Roeck Date: Mon Jan 10 09:28:56 2022 -0800 i2c: smbus: Improve handling of stuck alerts [ Upstream commit 37c526f00bc1c4f847fc800085f8f009d2e11be6 ] The following messages were observed while testing alert functionality on systems with multiple I2C devices on a single bus if alert was active on more than one chip. smbus_alert 3-000c: SMBALERT# from dev 0x0c, flag 0 smbus_alert 3-000c: no driver alert()! and: smbus_alert 3-000c: SMBALERT# from dev 0x28, flag 0 Once it starts, this message repeats forever at high rate. There is no device at any of the reported addresses. Analysis shows that this is seen if multiple devices have the alert pin active. Apparently some devices do not support SMBus arbitration correctly. They keep sending address bits after detecting an address collision and handle the collision not at all or too late. Specifically, address 0x0c is seen with ADT7461A at address 0x4c and ADM1021 at address 0x18 if alert is active on both chips. Address 0x28 is seen with ADT7483 at address 0x2a and ADT7461 at address 0x4c if alert is active on both chips. Once the system is in bad state (alert is set by more than one chip), it often only recovers by power cycling. To reduce the impact of this problem, abort the endless loop in smbus_alert() if the same address is read more than once and not handled by a driver. Fixes: b5527a7766f0 ("i2c: Add SMBus alert support") Signed-off-by: Guenter Roeck [wsa: it also fixed an interrupt storm in one of my experiments] Tested-by: Wolfram Sang [wsa: rebased, moved a comment as well, improved the 'invalid' value] Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit 9bd5abd9d337ff75d0ed544443d5f167bc9670e7 Author: Corey Minyard Date: Thu Nov 21 10:10:51 2019 +0100 i2c: smbus: Don't filter out duplicate alerts [ Upstream commit dca0dd28fa5e0a1ec41a623dbaf667601fc62331 ] Getting the same alert twice in a row is legal and normal, especially on a fast device (like running in qemu). Kind of like interrupts. So don't report duplicate alerts, and deliver them normally. [JD: Fixed subject] Signed-off-by: Corey Minyard Signed-off-by: Jean Delvare Reviewed-by: Benjamin Tissoires Signed-off-by: Wolfram Sang Stable-dep-of: 37c526f00bc1 ("i2c: smbus: Improve handling of stuck alerts") Signed-off-by: Sasha Levin commit ba9a332d1ef5bcf4677de1613ba449304e8f338d Author: Mark Rutland Date: Fri Aug 9 11:34:26 2024 +0100 arm64: errata: Expand speculative SSBS workaround (again) [ Upstream commit adeec61a4723fd3e39da68db4cc4d924e6d7f641 ] A number of Arm Ltd CPUs suffer from errata whereby an MSR to the SSBS special-purpose register does not affect subsequent speculative instructions, permitting speculative store bypassing for a window of time. We worked around this for a number of CPUs in commits: * 7187bb7d0b5c7dfa ("arm64: errata: Add workaround for Arm errata 3194386 and 3312417") * 75b3c43eab594bfb ("arm64: errata: Expand speculative SSBS workaround") Since then, similar errata have been published for a number of other Arm Ltd CPUs, for which the same mitigation is sufficient. This is described in their respective Software Developer Errata Notice (SDEN) documents: * Cortex-A76 (MP052) SDEN v31.0, erratum 3324349 https://developer.arm.com/documentation/SDEN-885749/3100/ * Cortex-A77 (MP074) SDEN v19.0, erratum 3324348 https://developer.arm.com/documentation/SDEN-1152370/1900/ * Cortex-A78 (MP102) SDEN v21.0, erratum 3324344 https://developer.arm.com/documentation/SDEN-1401784/2100/ * Cortex-A78C (MP138) SDEN v16.0, erratum 3324346 https://developer.arm.com/documentation/SDEN-1707916/1600/ * Cortex-A78C (MP154) SDEN v10.0, erratum 3324347 https://developer.arm.com/documentation/SDEN-2004089/1000/ * Cortex-A725 (MP190) SDEN v5.0, erratum 3456106 https://developer.arm.com/documentation/SDEN-2832921/0500/ * Cortex-X1 (MP077) SDEN v21.0, erratum 3324344 https://developer.arm.com/documentation/SDEN-1401782/2100/ * Cortex-X1C (MP136) SDEN v16.0, erratum 3324346 https://developer.arm.com/documentation/SDEN-1707914/1600/ * Neoverse-N1 (MP050) SDEN v32.0, erratum 3324349 https://developer.arm.com/documentation/SDEN-885747/3200/ * Neoverse-V1 (MP076) SDEN v19.0, erratum 3324341 https://developer.arm.com/documentation/SDEN-1401781/1900/ Note that due to the manner in which Arm develops IP and tracks errata, some CPUs share a common erratum number and some CPUs have multiple erratum numbers for the same HW issue. On parts without SB, it is necessary to use ISB for the workaround. The spec_bar() macro used in the mitigation will expand to a "DSB SY; ISB" sequence in this case, which is sufficient on all affected parts. Enable the existing mitigation by adding the relevant MIDRs to erratum_spec_ssbs_list. The list is sorted alphanumerically (involving moving Neoverse-V3 after Neoverse-V2) so that this is easy to audit and potentially extend again in future. The Kconfig text is also updated to clarify the set of affected parts and the mitigation. Signed-off-by: Mark Rutland Cc: James Morse Cc: Will Deacon Reviewed-by: Anshuman Khandual Acked-by: Will Deacon Link: https://lore.kernel.org/r/20240801101803.1982459-4-mark.rutland@arm.com Signed-off-by: Catalin Marinas [ Mark: fix conflicts in silicon-errata.rst ] Signed-off-by: Mark Rutland Signed-off-by: Sasha Levin commit 76b4fbb66146cc1531870abbf43f54704069b202 Author: Mark Rutland Date: Fri Aug 9 11:34:25 2024 +0100 arm64: cputype: Add Cortex-A725 definitions [ Upstream commit 9ef54a384526911095db465e77acc1cb5266b32c ] Add cputype definitions for Cortex-A725. These will be used for errata detection in subsequent patches. These values can be found in the Cortex-A725 TRM: https://developer.arm.com/documentation/107652/0001/ ... in table A-247 ("MIDR_EL1 bit descriptions"). Signed-off-by: Mark Rutland Cc: James Morse Cc: Will Deacon Reviewed-by: Anshuman Khandual Link: https://lore.kernel.org/r/20240801101803.1982459-3-mark.rutland@arm.com Signed-off-by: Catalin Marinas [ Mark: trivial backport ] Signed-off-by: Mark Rutland Signed-off-by: Sasha Levin commit 90f49639d409bfe0f2a9fe08c88349f88b95900b Author: Mark Rutland Date: Fri Aug 9 11:34:24 2024 +0100 arm64: cputype: Add Cortex-X1C definitions [ Upstream commit 58d245e03c324d083a0ec3b9ab8ebd46ec9848d7 ] Add cputype definitions for Cortex-X1C. These will be used for errata detection in subsequent patches. These values can be found in the Cortex-X1C TRM: https://developer.arm.com/documentation/101968/0002/ ... in section B2.107 ("MIDR_EL1, Main ID Register, EL1"). Signed-off-by: Mark Rutland Cc: James Morse Cc: Will Deacon Reviewed-by: Anshuman Khandual Link: https://lore.kernel.org/r/20240801101803.1982459-2-mark.rutland@arm.com Signed-off-by: Catalin Marinas [ Mark: trivial backport ] Signed-off-by: Mark Rutland Signed-off-by: Sasha Levin commit d19a135ca282a1fd781eaff7187177346433b31b Author: Mark Rutland Date: Fri Aug 9 11:34:23 2024 +0100 arm64: errata: Expand speculative SSBS workaround [ Upstream commit 75b3c43eab594bfbd8184ec8ee1a6b820950819a ] A number of Arm Ltd CPUs suffer from errata whereby an MSR to the SSBS special-purpose register does not affect subsequent speculative instructions, permitting speculative store bypassing for a window of time. We worked around this for Cortex-X4 and Neoverse-V3, in commit: 7187bb7d0b5c7dfa ("arm64: errata: Add workaround for Arm errata 3194386 and 3312417") ... as per their Software Developer Errata Notice (SDEN) documents: * Cortex-X4 SDEN v8.0, erratum 3194386: https://developer.arm.com/documentation/SDEN-2432808/0800/ * Neoverse-V3 SDEN v6.0, erratum 3312417: https://developer.arm.com/documentation/SDEN-2891958/0600/ Since then, similar errata have been published for a number of other Arm Ltd CPUs, for which the mitigation is the same. This is described in their respective SDEN documents: * Cortex-A710 SDEN v19.0, errataum 3324338 https://developer.arm.com/documentation/SDEN-1775101/1900/?lang=en * Cortex-A720 SDEN v11.0, erratum 3456091 https://developer.arm.com/documentation/SDEN-2439421/1100/?lang=en * Cortex-X2 SDEN v19.0, erratum 3324338 https://developer.arm.com/documentation/SDEN-1775100/1900/?lang=en * Cortex-X3 SDEN v14.0, erratum 3324335 https://developer.arm.com/documentation/SDEN-2055130/1400/?lang=en * Cortex-X925 SDEN v8.0, erratum 3324334 https://developer.arm.com/documentation/109108/800/?lang=en * Neoverse-N2 SDEN v17.0, erratum 3324339 https://developer.arm.com/documentation/SDEN-1982442/1700/?lang=en * Neoverse-V2 SDEN v9.0, erratum 3324336 https://developer.arm.com/documentation/SDEN-2332927/900/?lang=en Note that due to shared design lineage, some CPUs share the same erratum number. Add these to the existing mitigation under CONFIG_ARM64_ERRATUM_3194386. As listing all of the erratum IDs in the runtime description would be unwieldy, this is reduced to: "SSBS not fully self-synchronizing" ... matching the description of the errata in all of the SDENs. Signed-off-by: Mark Rutland Cc: James Morse Cc: Will Deacon Link: https://lore.kernel.org/r/20240603111812.1514101-6-mark.rutland@arm.com Signed-off-by: Catalin Marinas [ Mark: fix conflicts and renames ] Signed-off-by: Mark Rutland Signed-off-by: Sasha Levin commit 31c04d3f6870ad64b02ca1d676a63aa68860a07c Author: Mark Rutland Date: Fri Aug 9 11:34:22 2024 +0100 arm64: errata: Unify speculative SSBS errata logic [ Upstream commit ec768766608092087dfb5c1fc45a16a6f524dee2 ] Cortex-X4 erratum 3194386 and Neoverse-V3 erratum 3312417 are identical, with duplicate Kconfig text and some unsightly ifdeffery. While we try to share code behind CONFIG_ARM64_WORKAROUND_SPECULATIVE_SSBS, having separate options results in a fair amount of boilerplate code, and this will only get worse as we expand the set of affected CPUs. To reduce this boilerplate, unify the two behind a common Kconfig option. This removes the duplicate text and Kconfig logic, and removes the need for the intermediate ARM64_WORKAROUND_SPECULATIVE_SSBS option. The set of affected CPUs is described as a list so that this can easily be extended. I've used ARM64_ERRATUM_3194386 (matching the Neoverse-V3 erratum ID) as the common option, matching the way we use ARM64_ERRATUM_1319367 to cover Cortex-A57 erratum 1319537 and Cortex-A72 erratum 1319367. Signed-off-by: Mark Rutland Cc: James Morse Cc: Will Deacon Link: https://lore.kernel.org/r/20240603111812.1514101-5-mark.rutland@arm.com Signed-off-by: Catalin Marinas [ Mark: fix conflicts & renames, drop unneeded cpucaps.h ] Signed-off-by: Mark Rutland Signed-off-by: Sasha Levin commit 32480850c6174e8f74a4a04a416403155daeb4b2 Author: Mark Rutland Date: Fri Aug 9 11:34:21 2024 +0100 arm64: cputype: Add Cortex-X925 definitions [ Upstream commit fd2ff5f0b320f418288e7a1f919f648fbc8a0dfc ] Add cputype definitions for Cortex-X925. These will be used for errata detection in subsequent patches. These values can be found in Table A-285 ("MIDR_EL1 bit descriptions") in issue 0001-05 of the Cortex-X925 TRM, which can be found at: https://developer.arm.com/documentation/102807/0001/?lang=en Signed-off-by: Mark Rutland Cc: James Morse Cc: Will Deacon Link: https://lore.kernel.org/r/20240603111812.1514101-4-mark.rutland@arm.com Signed-off-by: Catalin Marinas [ Mark: trivial backport ] Signed-off-by: Mark Rutland Signed-off-by: Sasha Levin commit e890465ebf42cc9973c150d1b1d7d9584d997222 Author: Mark Rutland Date: Fri Aug 9 11:34:20 2024 +0100 arm64: cputype: Add Cortex-A720 definitions [ Upstream commit add332c40328cf06fe35e4b3cde8ec315c4629e5 ] Add cputype definitions for Cortex-A720. These will be used for errata detection in subsequent patches. These values can be found in Table A-186 ("MIDR_EL1 bit descriptions") in issue 0002-05 of the Cortex-A720 TRM, which can be found at: https://developer.arm.com/documentation/102530/0002/?lang=en Signed-off-by: Mark Rutland Cc: James Morse Cc: Will Deacon Link: https://lore.kernel.org/r/20240603111812.1514101-3-mark.rutland@arm.com Signed-off-by: Catalin Marinas [ Mark: trivial backport ] Signed-off-by: Mark Rutland Signed-off-by: Sasha Levin commit d58774b5f184a400f78ec5f25ba985a5c36ddbe2 Author: Mark Rutland Date: Fri Aug 9 11:34:19 2024 +0100 arm64: cputype: Add Cortex-X3 definitions [ Upstream commit be5a6f238700f38b534456608588723fba96c5ab ] Add cputype definitions for Cortex-X3. These will be used for errata detection in subsequent patches. These values can be found in Table A-263 ("MIDR_EL1 bit descriptions") in issue 07 of the Cortex-X3 TRM, which can be found at: https://developer.arm.com/documentation/101593/0102/?lang=en Signed-off-by: Mark Rutland Cc: James Morse Cc: Will Deacon Link: https://lore.kernel.org/r/20240603111812.1514101-2-mark.rutland@arm.com Signed-off-by: Catalin Marinas [ Mark: trivial backport ] Signed-off-by: Mark Rutland Signed-off-by: Sasha Levin commit 60bb45497476d139efafe7b97c3b5318b9a6cdc5 Author: Mark Rutland Date: Fri Aug 9 11:34:18 2024 +0100 arm64: errata: Add workaround for Arm errata 3194386 and 3312417 [ Upstream commit 7187bb7d0b5c7dfa18ca82e9e5c75e13861b1d88 ] Cortex-X4 and Neoverse-V3 suffer from errata whereby an MSR to the SSBS special-purpose register does not affect subsequent speculative instructions, permitting speculative store bypassing for a window of time. This is described in their Software Developer Errata Notice (SDEN) documents: * Cortex-X4 SDEN v8.0, erratum 3194386: https://developer.arm.com/documentation/SDEN-2432808/0800/ * Neoverse-V3 SDEN v6.0, erratum 3312417: https://developer.arm.com/documentation/SDEN-2891958/0600/ To workaround these errata, it is necessary to place a speculation barrier (SB) after MSR to the SSBS special-purpose register. This patch adds the requisite SB after writes to SSBS within the kernel, and hides the presence of SSBS from EL0 such that userspace software which cares about SSBS will manipulate this via prctl(PR_GET_SPECULATION_CTRL, ...). Signed-off-by: Mark Rutland Cc: Catalin Marinas Cc: James Morse Cc: Will Deacon Link: https://lore.kernel.org/r/20240508081400.235362-5-mark.rutland@arm.com Signed-off-by: Will Deacon [ Mark: fix conflicts & renames, drop unneeded cpucaps.h, fold in user_feature_fixup() ] Signed-off-by: Mark Rutland Signed-off-by: Sasha Levin commit c4d3c615cfd27b454b0bfd055a4ea8f4d2673dc5 Author: Mark Rutland Date: Fri Aug 9 11:34:17 2024 +0100 arm64: cputype: Add Neoverse-V3 definitions [ Upstream commit 0ce85db6c2141b7ffb95709d76fc55a27ff3cdc1 ] Add cputype definitions for Neoverse-V3. These will be used for errata detection in subsequent patches. These values can be found in Table B-249 ("MIDR_EL1 bit descriptions") in issue 0001-04 of the Neoverse-V3 TRM, which can be found at: https://developer.arm.com/documentation/107734/0001/?lang=en Signed-off-by: Mark Rutland Cc: Catalin Marinas Cc: James Morse Cc: Will Deacon Link: https://lore.kernel.org/r/20240508081400.235362-4-mark.rutland@arm.com Signed-off-by: Will Deacon [ Mark: trivial backport ] Signed-off-by: Mark Rutland Signed-off-by: Sasha Levin commit 7e13067758a1bb6cec2366b5a1c0f73e132c65e9 Author: Mark Rutland Date: Fri Aug 9 11:34:16 2024 +0100 arm64: cputype: Add Cortex-X4 definitions [ Upstream commit 02a0a04676fa7796d9cbc9eb5ca120aaa194d2dd ] Add cputype definitions for Cortex-X4. These will be used for errata detection in subsequent patches. These values can be found in Table B-249 ("MIDR_EL1 bit descriptions") in issue 0002-05 of the Cortex-X4 TRM, which can be found at: https://developer.arm.com/documentation/102484/0002/?lang=en Signed-off-by: Mark Rutland Cc: Catalin Marinas Cc: James Morse Cc: Will Deacon Link: https://lore.kernel.org/r/20240508081400.235362-3-mark.rutland@arm.com Signed-off-by: Will Deacon [ Mark: fix conflict (dealt with upstream via a later merge) ] Signed-off-by: Mark Rutland Signed-off-by: Sasha Levin commit 4fecc9ed9085f849f56be7cef0599be9b5b8bb7a Author: Besar Wicaksono Date: Fri Aug 9 11:34:15 2024 +0100 arm64: Add Neoverse-V2 part [ Upstream commit f4d9d9dcc70b96b5e5d7801bd5fbf8491b07b13d ] Add the part number and MIDR for Neoverse-V2 Signed-off-by: Besar Wicaksono Reviewed-by: James Clark Link: https://lore.kernel.org/r/20240109192310.16234-2-bwicaksono@nvidia.com Signed-off-by: Will Deacon [ Mark: trivial backport ] Signed-off-by: Mark Rutland Signed-off-by: Sasha Levin commit 762dd597c7bb48aefc2d9d8daa5cf72b1132ade2 Author: James Morse Date: Fri Aug 9 11:34:14 2024 +0100 arm64: cpufeature: Force HWCAP to be based on the sysreg visible to user-space [ Upstream commit 237405ebef580a7352a52129b2465c117145eafa ] arm64 advertises hardware features to user-space via HWCAPs, and by emulating access to the CPUs id registers. The cpufeature code has a sanitised system-wide view of an id register, and a sanitised user-space view of an id register, where some features use their 'safe' value instead of the hardware value. It is currently possible for a HWCAP to be advertised where the user-space view of the id register does not show the feature as supported. Erratum workaround need to remove both the HWCAP, and the feature from the user-space view of the id register. This involves duplicating the code, and spreading it over cpufeature.c and cpu_errata.c. Make the HWCAP code use the user-space view of id registers. This ensures the values never diverge, and allows erratum workaround to remove HWCAP by modifying the user-space view of the id register. Signed-off-by: James Morse Reviewed-by: Suzuki K Poulose Link: https://lore.kernel.org/r/20220909165938.3931307-2-james.morse@arm.com Signed-off-by: Catalin Marinas [ Mark: fixup lack of 'width' parameter ] Signed-off-by: Mark Rutland Signed-off-by: Sasha Levin commit a61144525f8e600c2c617e0aaf69b3e890287a73 Author: Kemeng Shi Date: Sat Jun 3 23:03:11 2023 +0800 ext4: fix wrong unit use in ext4_mb_find_by_goal [ Upstream commit 99c515e3a860576ba90c11acbc1d6488dfca6463 ] We need start in block unit while fe_start is in cluster unit. Use ext4_grp_offs_to_block helper to convert fe_start to get start in block unit. Signed-off-by: Kemeng Shi Reviewed-by: Ojaswin Mujoo Link: https://lore.kernel.org/r/20230603150327.3596033-4-shikemeng@huaweicloud.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit 0860bad4a49dbf0c284969c68dfdd4ba54ee0a43 Author: Benjamin Coddington Date: Wed Jul 17 10:49:33 2024 -0400 SUNRPC: Fix a race to wake a sync task [ Upstream commit ed0172af5d6fc07d1b40ca82f5ca3979300369f7 ] We've observed NFS clients with sync tasks sleeping in __rpc_execute waiting on RPC_TASK_QUEUED that have not responded to a wake-up from rpc_make_runnable(). I suspect this problem usually goes unnoticed, because on a busy client the task will eventually be re-awoken by another task completion or xprt event. However, if the state manager is draining the slot table, a sync task missing a wake-up can result in a hung client. We've been able to prove that the waker in rpc_make_runnable() successfully calls wake_up_bit() (ie- there's no race to tk_runstate), but the wake_up_bit() call fails to wake the waiter. I suspect the waker is missing the load of the bit's wait_queue_head, so waitqueue_active() is false. There are some very helpful comments about this problem above wake_up_bit(), prepare_to_wait(), and waitqueue_active(). Fix this by inserting smp_mb__after_atomic() before the wake_up_bit(), which pairs with prepare_to_wait() calling set_current_state(). Signed-off-by: Benjamin Coddington Reviewed-by: Jeff Layton Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit 1ec5ea9e25f582fd6999393e2f2c3bf56f234e05 Author: Peter Oberparleiter Date: Thu Jun 20 14:20:27 2024 +0200 s390/sclp: Prevent release of buffer in I/O [ Upstream commit bf365071ea92b9579d5a272679b74052a5643e35 ] When a task waiting for completion of a Store Data operation is interrupted, an attempt is made to halt this operation. If this attempt fails due to a hardware or firmware problem, there is a chance that the SCLP facility might store data into buffers referenced by the original operation at a later time. Handle this situation by not releasing the referenced data buffers if the halt attempt fails. For current use cases, this might result in a leak of few pages of memory in case of a rare hardware/firmware malfunction. Reviewed-by: Heiko Carstens Signed-off-by: Peter Oberparleiter Signed-off-by: Alexander Gordeev Signed-off-by: Sasha Levin commit 969d683bfef15a2a690c9e94ddcb6173c8bea056 Author: Kemeng Shi Date: Tue May 14 19:24:30 2024 +0800 jbd2: avoid memleak in jbd2_journal_write_metadata_buffer [ Upstream commit cc102aa24638b90e04364d64e4f58a1fa91a1976 ] The new_bh is from alloc_buffer_head, we should call free_buffer_head to free it in error case. Signed-off-by: Kemeng Shi Reviewed-by: Zhang Yi Reviewed-by: Jan Kara Link: https://patch.msgid.link/20240514112438.1269037-2-shikemeng@huaweicloud.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit 87c2a57fdb7c5d353ab63865c3d3f8ef90965756 Author: Michal Pecio Date: Sun Apr 14 19:00:40 2024 +0200 media: uvcvideo: Fix the bandwdith quirk on USB 3.x [ Upstream commit 9e3d55fbd160b3ca376599a68b4cddfdc67d4153 ] The bandwidth fixup quirk doesn't know that SuperSpeed exists and has the same 8 service intervals per millisecond as High Speed, hence its calculations are wrong. Assume that all speeds from HS up use 8 intervals per millisecond. No further changes are needed, updated code has been confirmed to work with all speeds from FS to SS. Signed-off-by: Michal Pecio Reviewed-by: Ricardo Ribalda Reviewed-by: Laurent Pinchart Link: https://lore.kernel.org/r/20240414190040.2255a0bc@foxbook Signed-off-by: Laurent Pinchart Signed-off-by: Sasha Levin commit 04637027436d376e3ae95c18eb9a8f11092035a6 Author: Ricardo Ribalda Date: Sat Mar 23 10:48:03 2024 +0000 media: uvcvideo: Ignore empty TS packets [ Upstream commit 5cd7c25f6f0576073b3d03bc4cfb1e8ca63a1195 ] Some SunplusIT cameras took a borderline interpretation of the UVC 1.5 standard, and fill the PTS and SCR fields with invalid data if the package does not contain data. "STC must be captured when the first video data of a video frame is put on the USB bus." Some SunplusIT devices send, e.g., buffer: 0xa7755c00 len 000012 header:0x8c stc 00000000 sof 0000 pts 00000000 buffer: 0xa7755c00 len 000012 header:0x8c stc 00000000 sof 0000 pts 00000000 buffer: 0xa7755c00 len 000668 header:0x8c stc 73779dba sof 070c pts 7376d37a While the UVC specification meant that the first two packets shouldn't have had the SCR bit set in the header. This borderline/buggy interpretation has been implemented in a variety of devices, from directly SunplusIT and from other OEMs that rebrand SunplusIT products. So quirking based on VID:PID will be problematic. All the affected modules have the following extension unit: VideoControl Interface Descriptor: guidExtensionCode {82066163-7050-ab49-b8cc-b3855e8d221d} But the vendor plans to use that GUID in the future and fix the bug, this means that we should use heuristic to figure out the broken packets. This patch takes care of this. lsusb of one of the affected cameras: Bus 001 Device 003: ID 1bcf:2a01 Sunplus Innovation Technology Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.01 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x1bcf Sunplus Innovation Technology Inc. idProduct 0x2a01 bcdDevice 0.02 iManufacturer 1 SunplusIT Inc iProduct 2 HanChen Wise Camera iSerial 3 01.00.00 bNumConfigurations 1 Tested-by: HungNien Chen Reviewed-by: Sergey Senozhatsky Reviewed-by: Laurent Pinchart Signed-off-by: Ricardo Ribalda Reviewed-by: Tomasz Figa Link: https://lore.kernel.org/r/20240323-resend-hwtimestamp-v10-2-b08e590d97c7@chromium.org Signed-off-by: Laurent Pinchart Signed-off-by: Sasha Levin commit ff5c4eb71ee8951c789b079f6e948f86708b04ed Author: Ma Jun Date: Sat May 11 15:48:02 2024 +0800 drm/amdgpu: Fix the null pointer dereference to ras_manager [ Upstream commit 4c11d30c95576937c6c35e6f29884761f2dddb43 ] Check ras_manager before using it Signed-off-by: Ma Jun Reviewed-by: Lijo Lazar Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit a8ca88d3d95f4efe61471f63a7222c6f01eaf9a1 Author: Filipe Manana Date: Wed Jul 3 15:40:59 2024 +0100 btrfs: fix bitmap leak when loading free space cache on duplicate entry [ Upstream commit 320d8dc612660da84c3b70a28658bb38069e5a9a ] If we failed to link a free space entry because there's already a conflicting entry for the same offset, we free the free space entry but we don't free the associated bitmap that we had just allocated before. Fix that by freeing the bitmap before freeing the entry. Reviewed-by: Johannes Thumshirn Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit 4dd406a3081aacdbc58969021d9e81c0aa3d8660 Author: Johannes Berg Date: Thu Jun 27 10:44:11 2024 +0200 wifi: nl80211: don't give key data to userspace [ Upstream commit a7e5793035792cc46a1a4b0a783655ffa897dfe9 ] When a key is requested by userspace, there's really no need to include the key data, the sequence counter is really what userspace needs in this case. The fact that it's included is just a historic quirk. Remove the key data. Reviewed-by: Miriam Rachel Korenblit Link: https://patch.msgid.link/20240627104411.b6a4f097e4ea.I7e6cc976cb9e8a80ef25a3351330f313373b4578@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 5def895b42ef16a2da6402818cba8d7ec8ede1ef Author: Roman Smirnov Date: Thu Jun 20 10:24:13 2024 +0300 udf: prevent integer overflow in udf_bitmap_free_blocks() [ Upstream commit 56e69e59751d20993f243fb7dd6991c4e522424c ] An overflow may occur if the function is called with the last block and an offset greater than zero. It is necessary to add a check to avoid this. Found by Linux Verification Center (linuxtesting.org) with Svace. [JK: Make test cover also unalloc table freeing] Link: https://patch.msgid.link/20240620072413.7448-1-r.smirnov@omp.ru Suggested-by: Jan Kara Signed-off-by: Roman Smirnov Signed-off-by: Jan Kara Signed-off-by: Sasha Levin commit 9d9e96dc565b47f42dc7bc41c2d1b96237f68758 Author: FUJITA Tomonori Date: Mon Jun 24 08:55:01 2024 +0900 PCI: Add Edimax Vendor ID to pci_ids.h [ Upstream commit eee5528890d54b22b46f833002355a5ee94c3bb4 ] Add the Edimax Vendor ID (0x1432) for an ethernet driver for Tehuti Networks TN40xx chips. This ID can be used for Realtek 8180 and Ralink rt28xx wireless drivers. Signed-off-by: FUJITA Tomonori Acked-by: Bjorn Helgaas Link: https://patch.msgid.link/20240623235507.108147-2-fujita.tomonori@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 0f82fcdc8e7f796d77d80cc6198a48b145e11762 Author: Yonghong Song Date: Wed Jun 5 13:12:03 2024 -0700 selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRT [ Upstream commit 7015843afcaf68c132784c89528dfddc0005e483 ] Alexei reported that send_signal test may fail with nested CONFIG_PARAVIRT configs. In this particular case, the base VM is AMD with 166 cpus, and I run selftests with regular qemu on top of that and indeed send_signal test failed. I also tried with an Intel box with 80 cpus and there is no issue. The main qemu command line includes: -enable-kvm -smp 16 -cpu host The failure log looks like: $ ./test_progs -t send_signal [ 48.501588] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [test_progs:2225] [ 48.503622] Modules linked in: bpf_testmod(O) [ 48.503622] CPU: 9 PID: 2225 Comm: test_progs Tainted: G O 6.9.0-08561-g2c1713a8f1c9-dirty #69 [ 48.507629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 [ 48.511635] RIP: 0010:handle_softirqs+0x71/0x290 [ 48.511635] Code: [...] 10 0a 00 00 00 31 c0 65 66 89 05 d5 f4 fa 7e fb bb ff ff ff ff <49> c7 c2 cb [ 48.518527] RSP: 0018:ffffc90000310fa0 EFLAGS: 00000246 [ 48.519579] RAX: 0000000000000000 RBX: 00000000ffffffff RCX: 00000000000006e0 [ 48.522526] RDX: 0000000000000006 RSI: ffff88810791ae80 RDI: 0000000000000000 [ 48.523587] RBP: ffffc90000fabc88 R08: 00000005a0af4f7f R09: 0000000000000000 [ 48.525525] R10: 0000000561d2f29c R11: 0000000000006534 R12: 0000000000000280 [ 48.528525] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 48.528525] FS: 00007f2f2885cd00(0000) GS:ffff888237c40000(0000) knlGS:0000000000000000 [ 48.531600] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 48.535520] CR2: 00007f2f287059f0 CR3: 0000000106a28002 CR4: 00000000003706f0 [ 48.537538] Call Trace: [ 48.537538] [ 48.537538] ? watchdog_timer_fn+0x1cd/0x250 [ 48.539590] ? lockup_detector_update_enable+0x50/0x50 [ 48.539590] ? __hrtimer_run_queues+0xff/0x280 [ 48.542520] ? hrtimer_interrupt+0x103/0x230 [ 48.544524] ? __sysvec_apic_timer_interrupt+0x4f/0x140 [ 48.545522] ? sysvec_apic_timer_interrupt+0x3a/0x90 [ 48.547612] ? asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 48.547612] ? handle_softirqs+0x71/0x290 [ 48.547612] irq_exit_rcu+0x63/0x80 [ 48.551585] sysvec_apic_timer_interrupt+0x75/0x90 [ 48.552521] [ 48.553529] [ 48.553529] asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 48.555609] RIP: 0010:finish_task_switch.isra.0+0x90/0x260 [ 48.556526] Code: [...] 9f 58 0a 00 00 48 85 db 0f 85 89 01 00 00 4c 89 ff e8 53 d9 bd 00 fb 66 90 <4d> 85 ed 74 [ 48.562524] RSP: 0018:ffffc90000fabd38 EFLAGS: 00000282 [ 48.563589] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff83385620 [ 48.563589] RDX: ffff888237c73ae4 RSI: 0000000000000000 RDI: ffff888237c6fd00 [ 48.568521] RBP: ffffc90000fabd68 R08: 0000000000000000 R09: 0000000000000000 [ 48.569528] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8881009d0000 [ 48.573525] R13: ffff8881024e5400 R14: ffff88810791ae80 R15: ffff888237c6fd00 [ 48.575614] ? finish_task_switch.isra.0+0x8d/0x260 [ 48.576523] __schedule+0x364/0xac0 [ 48.577535] schedule+0x2e/0x110 [ 48.578555] pipe_read+0x301/0x400 [ 48.579589] ? destroy_sched_domains_rcu+0x30/0x30 [ 48.579589] vfs_read+0x2b3/0x2f0 [ 48.579589] ksys_read+0x8b/0xc0 [ 48.583590] do_syscall_64+0x3d/0xc0 [ 48.583590] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 48.586525] RIP: 0033:0x7f2f28703fa1 [ 48.587592] Code: [...] 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 80 3d c5 23 14 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 [ 48.593534] RSP: 002b:00007ffd90f8cf88 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 48.595589] RAX: ffffffffffffffda RBX: 00007ffd90f8d5e8 RCX: 00007f2f28703fa1 [ 48.595589] RDX: 0000000000000001 RSI: 00007ffd90f8cfb0 RDI: 0000000000000006 [ 48.599592] RBP: 00007ffd90f8d2f0 R08: 0000000000000064 R09: 0000000000000000 [ 48.602527] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 48.603589] R13: 00007ffd90f8d608 R14: 00007f2f288d8000 R15: 0000000000f6bdb0 [ 48.605527] In the test, two processes are communicating through pipe. Further debugging with strace found that the above splat is triggered as read() syscall could not receive the data even if the corresponding write() syscall in another process successfully wrote data into the pipe. The failed subtest is "send_signal_perf". The corresponding perf event has sample_period 1 and config PERF_COUNT_SW_CPU_CLOCK. sample_period 1 means every overflow event will trigger a call to the BPF program. So I suspect this may overwhelm the system. So I increased the sample_period to 100,000 and the test passed. The sample_period 10,000 still has the test failed. In other parts of selftest, e.g., [1], sample_freq is used instead. So I decided to use sample_freq = 1,000 since the test can pass as well. [1] https://lore.kernel.org/bpf/20240604070700.3032142-1-song@kernel.org/ Reported-by: Alexei Starovoitov Signed-off-by: Yonghong Song Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20240605201203.2603846-1-yonghong.song@linux.dev Signed-off-by: Sasha Levin commit d3eaa7fe11e9553cb1c5c0ce110ed7c4dcc6772e Author: Thomas Weißschuh Date: Sun Jun 9 13:13:28 2024 +0200 ACPI: SBS: manage alarm sysfs attribute through psy core [ Upstream commit 6bad28cfc30988a845fb3f59a99f4b8a4ce8fe95 ] Let the power supply core register the attribute. This ensures that the attribute is created before the device is announced to userspace, avoiding a race condition. Signed-off-by: Thomas Weißschuh Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit 79b7f33d4616d97743a582f6c20211f772c23f64 Author: Thomas Weißschuh Date: Sun Jun 9 09:27:16 2024 +0200 ACPI: battery: create alarm sysfs attribute atomically [ Upstream commit a231eed10ed5a290129fda36ad7bcc263c53ff7d ] Let the power supply core register the attribute. This ensures that the attribute is created before the device is announced to userspace, avoid a race condition. Signed-off-by: Thomas Weißschuh Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit 4c8f911560381ed989af10b6ed7b8b98a928a3a6 Author: Niklas Söderlund Date: Tue Jul 2 21:02:30 2024 +0200 clocksource/drivers/sh_cmt: Address race condition for clock events [ Upstream commit db19d3aa77612983a02bd223b3f273f896b243cf ] There is a race condition in the CMT interrupt handler. In the interrupt handler the driver sets a driver private flag, FLAG_IRQCONTEXT. This flag is used to indicate any call to set_next_event() should not be directly propagated to the device, but instead cached. This is done as the interrupt handler itself reprograms the device when needed before it completes and this avoids this operation to take place twice. It is unclear why this design was chosen, my suspicion is to allow the struct clock_event_device.event_handler callback, which is called while the FLAG_IRQCONTEXT is set, can update the next event without having to write to the device twice. Unfortunately there is a race between when the FLAG_IRQCONTEXT flag is set and later cleared where the interrupt handler have already started to write the next event to the device. If set_next_event() is called in this window the value is only cached in the driver but not written. This leads to the board to misbehave, or worse lockup and produce a splat. rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: 0-...!: (0 ticks this GP) idle=f5e0/0/0x0 softirq=519/519 fqs=0 (false positive?) rcu: (detected by 1, t=6502 jiffies, g=-595, q=77 ncpus=2) Sending NMI from CPU 1 to CPUs 0: NMI backtrace for cpu 0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.10.0-rc5-arm64-renesas-00019-g74a6f86eaf1c-dirty #20 Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : tick_check_broadcast_expired+0xc/0x40 lr : cpu_idle_poll.isra.0+0x8c/0x168 sp : ffff800081c63d70 x29: ffff800081c63d70 x28: 00000000580000c8 x27: 00000000bfee5610 x26: 0000000000000027 x25: 0000000000000000 x24: 0000000000000000 x23: ffff00007fbb9100 x22: ffff8000818f1008 x21: ffff8000800ef07c x20: ffff800081c79ec0 x19: ffff800081c70c28 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffc2c717d8 x14: 0000000000000000 x13: ffff000009c18080 x12: ffff8000825f7fc0 x11: 0000000000000000 x10: ffff8000818f3cd4 x9 : 0000000000000028 x8 : ffff800081c79ec0 x7 : ffff800081c73000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : ffff7ffffe286000 x3 : 0000000000000000 x2 : ffff7ffffe286000 x1 : ffff800082972900 x0 : ffff8000818f1008 Call trace: tick_check_broadcast_expired+0xc/0x40 do_idle+0x9c/0x280 cpu_startup_entry+0x34/0x40 kernel_init+0x0/0x11c do_one_initcall+0x0/0x260 __primary_switched+0x80/0x88 rcu: rcu_preempt kthread timer wakeup didn't happen for 6501 jiffies! g-595 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 rcu: Possible timer handling issue on cpu=0 timer-softirq=262 rcu: rcu_preempt kthread starved for 6502 jiffies! g-595 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:I stack:0 pid:15 tgid:15 ppid:2 flags:0x00000008 Call trace: __switch_to+0xbc/0x100 __schedule+0x358/0xbe0 schedule+0x48/0x148 schedule_timeout+0xc4/0x138 rcu_gp_fqs_loop+0x12c/0x764 rcu_gp_kthread+0x208/0x298 kthread+0x10c/0x110 ret_from_fork+0x10/0x20 The design have been part of the driver since it was first merged in early 2009. It becomes increasingly harder to trigger the issue the older kernel version one tries. It only takes a few boots on v6.10-rc5, while hundreds of boots are needed to trigger it on v5.10. Close the race condition by using the CMT channel lock for the two competing sections. The channel lock was added to the driver after its initial design. Signed-off-by: Niklas Söderlund Link: https://lore.kernel.org/r/20240702190230.3825292-1-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Daniel Lezcano Signed-off-by: Sasha Levin commit 6b33c468d543f6a83de2d61f09fec74b27e19fd2 Author: Yu Kuai Date: Tue Jun 11 21:22:51 2024 +0800 md/raid5: avoid BUG_ON() while continue reshape after reassembling [ Upstream commit 305a5170dc5cf3d395bb4c4e9239bca6d0b54b49 ] Currently, mdadm support --revert-reshape to abort the reshape while reassembling, as the test 07revert-grow. However, following BUG_ON() can be triggerred by the test: kernel BUG at drivers/md/raid5.c:6278! invalid opcode: 0000 [#1] PREEMPT SMP PTI irq event stamp: 158985 CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94 RIP: 0010:reshape_request+0x3f1/0xe60 Call Trace: raid5_sync_request+0x43d/0x550 md_do_sync+0xb7a/0x2110 md_thread+0x294/0x2b0 kthread+0x147/0x1c0 ret_from_fork+0x59/0x70 ret_from_fork_asm+0x1a/0x30 Root cause is that --revert-reshape update the raid_disks from 5 to 4, while reshape position is still set, and after reassembling the array, reshape position will be read from super block, then during reshape the checking of 'writepos' that is caculated by old reshape position will fail. Fix this panic the easy way first, by converting the BUG_ON() to WARN_ON(), and stop the reshape if checkings fail. Noted that mdadm must fix --revert-shape as well, and probably md/raid should enhance metadata validation as well, however this means reassemble will fail and there must be user tools to fix the wrong metadata. Signed-off-by: Yu Kuai Signed-off-by: Song Liu Link: https://lore.kernel.org/r/20240611132251.1967786-13-yukuai1@huaweicloud.com Signed-off-by: Sasha Levin commit 6fdd36fba342f34814bac465ad78d46f160e0665 Author: Csókás, Bence Date: Wed Aug 7 10:09:56 2024 +0200 net: fec: Stop PPS on driver remove [ Upstream commit 8fee6d5ad5fa18c270eedb2a2cdf58dbadefb94b ] PPS was not stopped in `fec_ptp_stop()`, called when the adapter was removed. Consequentially, you couldn't safely reload the driver with the PPS signal on. Fixes: 32cba57ba74b ("net: fec: introduce fec_ptp_stop and use in probe fail path") Reviewed-by: Fabio Estevam Link: https://lore.kernel.org/netdev/CAOMZO5BzcZR8PwKKwBssQq_wAGzVgf1ffwe_nhpQJjviTdxy-w@mail.gmail.com/T/#m01dcb810bfc451a492140f6797ca77443d0cb79f Signed-off-by: Csókás, Bence Reviewed-by: Andrew Lunn Reviewed-by: Frank Li Link: https://patch.msgid.link/20240807080956.2556602-1-csokas.bence@prolan.hu Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit d89b1a9387a413401c3f0b092e48b418ef72ef15 Author: Dmitry Antipov Date: Wed Jul 31 12:19:36 2024 +0300 Bluetooth: l2cap: always unlock channel in l2cap_conless_channel() [ Upstream commit c531e63871c0b50c8c4e62c048535a08886fba3e ] Add missing call to 'l2cap_chan_unlock()' on receive error handling path in 'l2cap_conless_channel()'. Fixes: a24cce144b98 ("Bluetooth: Fix reference counting of global L2CAP channels") Reported-by: syzbot+45ac74737e866894acb0@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=45ac74737e866894acb0 Signed-off-by: Dmitry Antipov Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit 96cc343c3f589a67ccba5ed31a545a2fb44639c5 Author: Eric Dumazet Date: Mon Aug 5 08:58:21 2024 +0000 net: linkwatch: use system_unbound_wq [ Upstream commit 3e7917c0cdad835a5121520fc5686d954b7a61ab ] linkwatch_event() grabs possibly very contended RTNL mutex. system_wq is not suitable for such work. Inspired by many noisy syzbot reports. 3 locks held by kworker/0:7/5266: #0: ffff888015480948 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3206 [inline] #0: ffff888015480948 ((wq_completion)events){+.+.}-{0:0}, at: process_scheduled_works+0x90a/0x1830 kernel/workqueue.c:3312 #1: ffffc90003f6fd00 ((linkwatch_work).work){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3207 [inline] , at: process_scheduled_works+0x945/0x1830 kernel/workqueue.c:3312 #2: ffffffff8fa6f208 (rtnl_mutex){+.+.}-{3:3}, at: linkwatch_event+0xe/0x60 net/core/link_watch.c:276 Reported-by: syzbot Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20240805085821.1616528-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 37c093449704017870604994ba9b813cdb9475a4 Author: Daniele Palmas Date: Thu Aug 1 15:55:12 2024 +0200 net: usb: qmi_wwan: fix memory leak for not ip packets [ Upstream commit 7ab107544b777c3bd7feb9fe447367d8edd5b202 ] Free the unused skb when not ip packets arrive. Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support") Signed-off-by: Daniele Palmas Acked-by: Bjørn Mork Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit c9b3fc4f157867e858734e31022ebee8a24f0de7 Author: Kuniyuki Iwashima Date: Wed Jul 31 16:46:24 2024 -0700 sctp: Fix null-ptr-deref in reuseport_add_sock(). [ Upstream commit 9ab0faa7f9ffe31296dbb9bbe6f76c72c14eea18 ] syzbot reported a null-ptr-deref while accessing sk2->sk_reuseport_cb in reuseport_add_sock(). [0] The repro first creates a listener with SO_REUSEPORT. Then, it creates another listener on the same port and concurrently closes the first listener. The second listen() calls reuseport_add_sock() with the first listener as sk2, where sk2->sk_reuseport_cb is not expected to be cleared concurrently, but the close() does clear it by reuseport_detach_sock(). The problem is SCTP does not properly synchronise reuseport_alloc(), reuseport_add_sock(), and reuseport_detach_sock(). The caller of reuseport_alloc() and reuseport_{add,detach}_sock() must provide synchronisation for sockets that are classified into the same reuseport group. Otherwise, such sockets form multiple identical reuseport groups, and all groups except one would be silently dead. 1. Two sockets call listen() concurrently 2. No socket in the same group found in sctp_ep_hashtable[] 3. Two sockets call reuseport_alloc() and form two reuseport groups 4. Only one group hit first in __sctp_rcv_lookup_endpoint() receives incoming packets Also, the reported null-ptr-deref could occur. TCP/UDP guarantees that would not happen by holding the hash bucket lock. Let's apply the locking strategy to __sctp_hash_endpoint() and __sctp_unhash_endpoint(). [0]: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 UID: 0 PID: 10230 Comm: syz-executor119 Not tainted 6.10.0-syzkaller-12585-g301927d2d2eb #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 RIP: 0010:reuseport_add_sock+0x27e/0x5e0 net/core/sock_reuseport.c:350 Code: 00 0f b7 5d 00 bf 01 00 00 00 89 de e8 1b a4 ff f7 83 fb 01 0f 85 a3 01 00 00 e8 6d a0 ff f7 49 8d 7e 12 48 89 f8 48 c1 e8 03 <42> 0f b6 04 28 84 c0 0f 85 4b 02 00 00 41 0f b7 5e 12 49 8d 7e 14 RSP: 0018:ffffc9000b947c98 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff8880252ddf98 RCX: ffff888079478000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000012 RBP: 0000000000000001 R08: ffffffff8993e18d R09: 1ffffffff1fef385 R10: dffffc0000000000 R11: fffffbfff1fef386 R12: ffff8880252ddac0 R13: dffffc0000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f24e45b96c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffcced5f7b8 CR3: 00000000241be000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __sctp_hash_endpoint net/sctp/input.c:762 [inline] sctp_hash_endpoint+0x52a/0x600 net/sctp/input.c:790 sctp_listen_start net/sctp/socket.c:8570 [inline] sctp_inet_listen+0x767/0xa20 net/sctp/socket.c:8625 __sys_listen_socket net/socket.c:1883 [inline] __sys_listen+0x1b7/0x230 net/socket.c:1894 __do_sys_listen net/socket.c:1902 [inline] __se_sys_listen net/socket.c:1900 [inline] __x64_sys_listen+0x5a/0x70 net/socket.c:1900 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f24e46039b9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 91 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f24e45b9228 EFLAGS: 00000246 ORIG_RAX: 0000000000000032 RAX: ffffffffffffffda RBX: 00007f24e468e428 RCX: 00007f24e46039b9 RDX: 00007f24e46039b9 RSI: 0000000000000003 RDI: 0000000000000004 RBP: 00007f24e468e420 R08: 00007f24e45b96c0 R09: 00007f24e45b96c0 R10: 00007f24e45b96c0 R11: 0000000000000246 R12: 00007f24e468e42c R13: 00007f24e465a5dc R14: 0020000000000001 R15: 00007ffcced5f7d8 Modules linked in: Fixes: 6ba845740267 ("sctp: process sk_reuseport in sctp_get_port_local") Reported-by: syzbot+e6979a5d2f10ecb700e4@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=e6979a5d2f10ecb700e4 Tested-by: syzbot+e6979a5d2f10ecb700e4@syzkaller.appspotmail.com Signed-off-by: Kuniyuki Iwashima Acked-by: Xin Long Link: https://patch.msgid.link/20240731234624.94055-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit c2237ce58af4d6db653632603d6d59367093b01c Author: Xin Long Date: Tue Dec 21 16:40:30 2021 -0500 sctp: move hlist_node and hashent out of sctp_ep_common [ Upstream commit 3d3b2f57d4447e6e9f4096ad01d0e4129f7bc7e9 ] Struct sctp_ep_common is included in both asoc and ep, but hlist_node and hashent are only needed by ep after asoc_hashtable was dropped by Commit b5eff7128366 ("sctp: drop the old assoc hashtable of sctp"). So it is better to move hlist_node and hashent from sctp_ep_common to sctp_endpoint, and it saves some space for each asoc. Signed-off-by: Xin Long Signed-off-by: David S. Miller Stable-dep-of: 9ab0faa7f9ff ("sctp: Fix null-ptr-deref in reuseport_add_sock().") Signed-off-by: Sasha Levin commit 25a727233a40a9b33370eec9f0cad67d8fd312f8 Author: Peter Zijlstra Date: Wed Jul 31 18:31:05 2024 +0200 x86/mm: Fix pti_clone_pgtable() alignment assumption [ Upstream commit 41e71dbb0e0a0fe214545fe64af031303a08524c ] Guenter reported dodgy crashes on an i386-nosmp build using GCC-11 that had the form of endless traps until entry stack exhaust and then #DF from the stack guard. It turned out that pti_clone_pgtable() had alignment assumptions on the start address, notably it hard assumes start is PMD aligned. This is true on x86_64, but very much not true on i386. These assumptions can cause the end condition to malfunction, leading to a 'short' clone. Guess what happens when the user mapping has a short copy of the entry text? Use the correct increment form for addr to avoid alignment assumptions. Fixes: 16a3fe634f6a ("x86/mm/pti: Clone kernel-image on PTE level for 32 bit") Reported-by: Guenter Roeck Tested-by: Guenter Roeck Suggested-by: Thomas Gleixner Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20240731163105.GG33588@noisy.programming.kicks-ass.net Signed-off-by: Sasha Levin commit 8243f4137570c8457a02b8d7f0043847eb977162 Author: Yipeng Zou Date: Tue Jul 30 09:44:00 2024 +0800 irqchip/mbigen: Fix mbigen node address layout [ Upstream commit 6be6cba9c4371d27f78d900ccfe34bb880d9ee20 ] The mbigen interrupt chip has its per node registers located in a contiguous region of page sized chunks. The code maps them into virtual address space as a contiguous region and determines the address of a node by using the node ID as index. mbigen chip |-----------------|------------|--------------| mgn_node_0 mgn_node_1 ... mgn_node_i |--------------| |--------------| |----------------------| [0x0000, 0x0x0FFF] [0x1000, 0x1FFF] [i*0x1000, (i+1)*0x1000 - 1] This works correctly up to 10 nodes, but then fails because the 11th's array slot is used for the MGN_CLEAR registers. mbigen chip |-----------|--------|--------|---------------|--------| mgn_node_0 mgn_node_1 ... mgn_clear_register ... mgn_node_i |-----------------| [0xA000, 0xAFFF] Skip the MGN_CLEAR register space when calculating the offset for node IDs greater than or equal to ten. Fixes: a6c2f87b8820 ("irqchip/mbigen: Implement the mbigen irq chip operation functions") Signed-off-by: Yipeng Zou Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/20240730014400.1751530-1-zouyipeng@huawei.com Signed-off-by: Sasha Levin commit f19bf41e73317b29331787bba0f5afdeb686a760 Author: Marc Zyngier Date: Wed Feb 9 16:25:59 2022 +0000 genirq: Allow irq_chip registration functions to take a const irq_chip [ Upstream commit 393e1280f765661cf39785e967676a4e57324126 ] In order to let a const irqchip be fed to the irqchip layer, adjust the various prototypes. An extra cast in irq_set_chip()() is required to avoid a warning. Signed-off-by: Marc Zyngier Acked-by: Linus Walleij Link: https://lore.kernel.org/r/20220209162607.1118325-3-maz@kernel.org Signed-off-by: Sasha Levin commit 922b824bb71ae57f9b368710bba68e7ad0c09377 Author: Alexander Maltsev Date: Wed Apr 17 18:51:41 2024 +0500 netfilter: ipset: Add list flush to cancel_gc [ Upstream commit c1193d9bbbd379defe9be3c6de566de684de8a6f ] Flushing list in cancel_gc drops references to other lists right away, without waiting for RCU to destroy list. Fixes race when referenced ipsets can't be destroyed while referring list is scheduled for destroy. Fixes: 97f7cf1cd80e ("netfilter: ipset: fix performance regression in swap operation") Signed-off-by: Alexander Maltsev Acked-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 869f240a5b69551a00e3b4e10ebef98a675a16b7 Author: Ma Ke Date: Thu Jul 25 10:29:42 2024 +0800 net: usb: sr9700: fix uninitialized variable use in sr_mdio_read commit 08f3a5c38087d1569e982a121aad1e6acbf145ce upstream. It could lead to error happen because the variable res is not updated if the call to sr_share_read_word returns an error. In this particular case error code was returned and res stayed uninitialized. Same issue also applies to sr_read_reg. This can be avoided by checking the return value of sr_share_read_word and sr_read_reg, and propagating the error if the read operation failed. Found by code review. Cc: stable@vger.kernel.org Fixes: c9b37458e956 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support") Signed-off-by: Ma Ke Reviewed-by: Shigeru Yoshida Reviewed-by: Hariprasad Kelam Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 479335789d921346a93186669cfc1f3ed89f63bf Author: Takashi Iwai Date: Wed Jul 31 16:19:41 2024 +0200 ALSA: usb-audio: Correct surround channels in UAC1 channel map commit b7b7e1ab7619deb3b299b5e5c619c3e6f183a12d upstream. USB-audio driver puts SNDRV_CHMAP_SL and _SR as left and right surround channels for UAC1 channel map, respectively. But they should have been SNDRV_CHMAP_RL and _RR; the current value *_SL and _SR are rather "side" channels, not "surround". I guess I took those mistakenly when I read the spec mentioning "surround left". This patch corrects those entries to be the right channels. Suggested-by: Sylvain BERTRAND Closes: https://lore.kernel.orgZ/qIyJD8lhd8hFhlC@freedom Fixes: 04324ccc75f9 ("ALSA: usb-audio: add channel map support") Cc: Link: https://patch.msgid.link/20240731142018.24750-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 41a6c31df77bd8e050136b0a200b537da9e1084a Author: Al Viro Date: Thu Aug 1 15:22:22 2024 -0400 protect the fetch of ->fd[fd] in do_dup2() from mispredictions commit 8aa37bde1a7b645816cda8b80df4753ecf172bf1 upstream. both callers have verified that fd is not greater than ->max_fds; however, misprediction might end up with tofree = fdt->fd[fd]; being speculatively executed. That's wrong for the same reasons why it's wrong in close_fd()/file_close_fd_locked(); the same solution applies - array_index_nospec(fd, fdt->max_fds) could differ from fd only in case of speculative execution on mispredicted path. Cc: stable@vger.kernel.org Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman commit 04dcab03e6fe4338e7ec8e6756f7bbd5ba4792a9 Author: Tatsunosuke Tobita Date: Tue Jul 9 14:57:28 2024 +0900 HID: wacom: Modify pen IDs commit f0d17d696dfce77c9abc830e4ac2d677890a2dad upstream. The pen ID, 0x80842, was not the correct ID for wacom driver to treat. The ID was corrected to 0x8842. Also, 0x4200 was not the expected ID used on any Wacom device. Therefore, 0x4200 was removed. Signed-off-by: Tatsunosuke Tobita Signed-off-by: Tatsunosuke Tobita Fixes: bfdc750c4cb2 ("HID: wacom: add three styli to wacom_intuos_get_tool_type") Cc: stable@kernel.org #6.2 Reviewed-by: Ping Cheng Link: https://patch.msgid.link/20240709055729.17158-1-tatsunosuke.wacom@gmail.com Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman commit ba35ce6480c42036efae2a7f0fa4157627bf7e18 Author: Maciej Żenczykowski Date: Mon Jul 29 17:17:48 2024 -0700 ipv6: fix ndisc_is_useropt() handling for PIO [ Upstream commit a46c68debf3be3a477a69ccbf0a1d050df841676 ] The current logic only works if the PIO is between two other ND user options. This fixes it so that the PIO can also be either before or after other ND user options (for example the first or last option in the RA). side note: there's actually Android tests verifying a portion of the old broken behaviour, so: https://android-review.googlesource.com/c/kernel/tests/+/3196704 fixes those up. Cc: Jen Linkova Cc: Lorenzo Colitti Cc: Patrick Rohr Cc: David Ahern Cc: YOSHIFUJI Hideaki / 吉藤英明 Cc: Jakub Kicinski Signed-off-by: Maciej Żenczykowski Fixes: 048c796beb6e ("ipv6: adjust ndisc_is_useropt() to also return true for PIO") Link: https://patch.msgid.link/20240730001748.147636-1-maze@google.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 9f96828b9444e85e7cd9a7038e825d28e38cbcae Author: Shahar Shitrit Date: Tue Jul 30 09:16:37 2024 +0300 net/mlx5e: Add a check for the return value from mlx5_port_set_eth_ptys [ Upstream commit 3f8e82a020a5c22f9b791f4ac499b8e18007fbda ] Since the documentation for mlx5_toggle_port_link states that it should only be used after setting the port register, we add a check for the return value from mlx5_port_set_eth_ptys to ensure the register was successfully set before calling it. Fixes: 667daedaecd1 ("net/mlx5e: Toggle link only after modifying port parameters") Signed-off-by: Shahar Shitrit Reviewed-by: Carolina Jubran Signed-off-by: Tariq Toukan Reviewed-by: Wojciech Drewek Link: https://patch.msgid.link/20240730061638.1831002-9-tariqt@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 37652fbef9809411cea55ea5fa1a170e299efcd0 Author: Alexandra Winter Date: Mon Jul 29 14:28:16 2024 +0200 net/iucv: fix use after free in iucv_sock_close() [ Upstream commit f558120cd709682b739207b48cf7479fd9568431 ] iucv_sever_path() is called from process context and from bh context. iucv->path is used as indicator whether somebody else is taking care of severing the path (or it is already removed / never existed). This needs to be done with atomic compare and swap, otherwise there is a small window where iucv_sock_close() will try to work with a path that has already been severed and freed by iucv_callback_connrej() called by iucv_tasklet_fn(). Example: [452744.123844] Call Trace: [452744.123845] ([<0000001e87f03880>] 0x1e87f03880) [452744.123966] [<00000000d593001e>] iucv_path_sever+0x96/0x138 [452744.124330] [<000003ff801ddbca>] iucv_sever_path+0xc2/0xd0 [af_iucv] [452744.124336] [<000003ff801e01b6>] iucv_sock_close+0xa6/0x310 [af_iucv] [452744.124341] [<000003ff801e08cc>] iucv_sock_release+0x3c/0xd0 [af_iucv] [452744.124345] [<00000000d574794e>] __sock_release+0x5e/0xe8 [452744.124815] [<00000000d5747a0c>] sock_close+0x34/0x48 [452744.124820] [<00000000d5421642>] __fput+0xba/0x268 [452744.124826] [<00000000d51b382c>] task_work_run+0xbc/0xf0 [452744.124832] [<00000000d5145710>] do_notify_resume+0x88/0x90 [452744.124841] [<00000000d5978096>] system_call+0xe2/0x2c8 [452744.125319] Last Breaking-Event-Address: [452744.125321] [<00000000d5930018>] iucv_path_sever+0x90/0x138 [452744.125324] [452744.125325] Kernel panic - not syncing: Fatal exception in interrupt Note that bh_lock_sock() is not serializing the tasklet context against process context, because the check for sock_owned_by_user() and corresponding handling is missing. Ideas for a future clean-up patch: A) Correct usage of bh_lock_sock() in tasklet context, as described in Link: https://lore.kernel.org/netdev/1280155406.2899.407.camel@edumazet-laptop/ Re-enqueue, if needed. This may require adding return values to the tasklet functions and thus changes to all users of iucv. B) Change iucv tasklet into worker and use only lock_sock() in af_iucv. Fixes: 7d316b945352 ("af_iucv: remove IUCV-pathes completely") Reviewed-by: Halil Pasic Signed-off-by: Alexandra Winter Link: https://patch.msgid.link/20240729122818.947756-1-wintera@linux.ibm.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit e8e1c9b282c26cfbe31eee5f0933e28de22699d1 Author: Ian Forbes Date: Fri Jul 19 11:36:27 2024 -0500 drm/vmwgfx: Fix overlay when using Screen Targets [ Upstream commit cb372a505a994cb39aa75acfb8b3bcf94787cf94 ] This code was never updated to support Screen Targets. Fixes a bug where Xv playback displays a green screen instead of actual video contents when 3D acceleration is disabled in the guest. Fixes: c8261a961ece ("vmwgfx: Major KMS refactoring / cleanup in preparation of screen targets") Reported-by: Doug Brown Closes: https://lore.kernel.org/all/bd9cb3c7-90e8-435d-bc28-0e38fee58977@schmorgal.com Signed-off-by: Ian Forbes Tested-by: Doug Brown Signed-off-by: Zack Rusin Link: https://patchwork.freedesktop.org/patch/msgid/20240719163627.20888-1-ian.forbes@broadcom.com Signed-off-by: Sasha Levin commit 3bcb8bba72ce89667fa863054956267c450c47ef Author: Danilo Krummrich Date: Thu Jul 18 18:58:46 2024 +0200 drm/nouveau: prime: fix refcount underflow [ Upstream commit a9bf3efc33f1fbf88787a277f7349459283c9b95 ] Calling nouveau_bo_ref() on a nouveau_bo without initializing it (and hence the backing ttm_bo) leads to a refcount underflow. Instead of calling nouveau_bo_ref() in the unwind path of drm_gem_object_init(), clean things up manually. Fixes: ab9ccb96a6e6 ("drm/nouveau: use prime helpers") Reviewed-by: Ben Skeggs Reviewed-by: Christian König Signed-off-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/20240718165959.3983-2-dakr@kernel.org (cherry picked from commit 1b93f3e89d03cfc576636e195466a0d728ad8de5) Signed-off-by: Danilo Krummrich Signed-off-by: Sasha Levin commit 84beb7738459cac0ff9f8a7c4654b8ff82a702c0 Author: Aleksandr Mishin Date: Thu Jun 6 10:52:04 2024 +0300 remoteproc: imx_rproc: Skip over memory region when node value is NULL [ Upstream commit 2fa26ca8b786888673689ccc9da6094150939982 ] In imx_rproc_addr_init() "nph = of_count_phandle_with_args()" just counts number of phandles. But phandles may be empty. So of_parse_phandle() in the parsing loop (0 < a < nph) may return NULL which is later dereferenced. Adjust this issue by adding NULL-return check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: a0ff4aa6f010 ("remoteproc: imx_rproc: add a NXP/Freescale imx_rproc driver") Signed-off-by: Aleksandr Mishin Reviewed-by: Peng Fan Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240606075204.12354-1-amishin@t-argos.ru [Fixed title to fit within the prescribed 70-75 charcters] Signed-off-by: Mathieu Poirier Signed-off-by: Sasha Levin commit 66b47133bfbbe06192ca1329b7e237fd7e362591 Author: Dong Aisheng Date: Fri Sep 10 17:06:19 2021 +0800 remoteproc: imx_rproc: Fix ignoring mapping vdev regions [ Upstream commit afe670e23af91d8a74a8d7049f6e0984bbf6ea11 ] vdev regions are typically named vdev0buffer, vdev0ring0, vdev0ring1 and etc. Change to strncmp to cover them all. Fixes: 8f2d8961640f ("remoteproc: imx_rproc: ignore mapping vdev regions") Reviewed-and-tested-by: Peng Fan Signed-off-by: Dong Aisheng Signed-off-by: Peng Fan Cc: stable Link: https://lore.kernel.org/r/20210910090621.3073540-5-peng.fan@oss.nxp.com Signed-off-by: Mathieu Poirier Signed-off-by: Bjorn Andersson Stable-dep-of: 2fa26ca8b786 ("remoteproc: imx_rproc: Skip over memory region when node value is NULL") Signed-off-by: Sasha Levin commit 8d1eca34ac1981c1b9822b6fbae419c5408eaa6d Author: Peng Fan Date: Sat Mar 6 19:24:24 2021 +0800 remoteproc: imx_rproc: ignore mapping vdev regions [ Upstream commit 8f2d8961640f0346cbe892273c3260a0d30c1931 ] vdev regions are vdev0vring0, vdev0vring1, vdevbuffer and similar. They are handled by remoteproc common code, no need to map in imx rproc driver. Signed-off-by: Peng Fan Reviewed-by: Mathieu Poirier Link: https://lore.kernel.org/r/1615029865-23312-10-git-send-email-peng.fan@oss.nxp.com Signed-off-by: Bjorn Andersson Stable-dep-of: 2fa26ca8b786 ("remoteproc: imx_rproc: Skip over memory region when node value is NULL") Signed-off-by: Sasha Levin commit a590e8dea3df2639921f874d763be961dd74e8f9 Author: Shenwei Wang Date: Wed Jul 3 11:32:50 2024 -0500 irqchip/imx-irqsteer: Handle runtime power management correctly [ Upstream commit 33b1c47d1fc0b5f06a393bb915db85baacba18ea ] The power domain is automatically activated from clk_prepare(). However, on certain platforms like i.MX8QM and i.MX8QXP, the power-on handling invokes sleeping functions, which triggers the 'scheduling while atomic' bug in the context switch path during device probing: BUG: scheduling while atomic: kworker/u13:1/48/0x00000002 Call trace: __schedule_bug+0x54/0x6c __schedule+0x7f0/0xa94 schedule+0x5c/0xc4 schedule_preempt_disabled+0x24/0x40 __mutex_lock.constprop.0+0x2c0/0x540 __mutex_lock_slowpath+0x14/0x20 mutex_lock+0x48/0x54 clk_prepare_lock+0x44/0xa0 clk_prepare+0x20/0x44 imx_irqsteer_resume+0x28/0xe0 pm_generic_runtime_resume+0x2c/0x44 __genpd_runtime_resume+0x30/0x80 genpd_runtime_resume+0xc8/0x2c0 __rpm_callback+0x48/0x1d8 rpm_callback+0x6c/0x78 rpm_resume+0x490/0x6b4 __pm_runtime_resume+0x50/0x94 irq_chip_pm_get+0x2c/0xa0 __irq_do_set_handler+0x178/0x24c irq_set_chained_handler_and_data+0x60/0xa4 mxc_gpio_probe+0x160/0x4b0 Cure this by implementing the irq_bus_lock/sync_unlock() interrupt chip callbacks and handle power management in them as they are invoked from non-atomic context. [ tglx: Rewrote change log, added Fixes tag ] Fixes: 0136afa08967 ("irqchip: Add driver for imx-irqsteer controller") Signed-off-by: Shenwei Wang Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240703163250.47887-1-shenwei.wang@nxp.com Signed-off-by: Sasha Levin commit 294aa15e79cee628cc49720f69a186f79ffd6611 Author: Lucas Stach Date: Wed Apr 6 18:37:01 2022 +0200 irqchip/imx-irqsteer: Add runtime PM support [ Upstream commit 4730d2233311d86cad9dc510318d1b40e4b53cf2 ] There are now SoCs that integrate the irqsteer controller within a separate power domain. In order to allow this domain to be powered down when not needed, add runtime PM support to the driver. Signed-off-by: Lucas Stach Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20220406163701.1277930-2-l.stach@pengutronix.de Stable-dep-of: 33b1c47d1fc0 ("irqchip/imx-irqsteer: Handle runtime power management correctly") Signed-off-by: Sasha Levin commit ee1e002d173fdd249829689d89523ea48ba02375 Author: Lucas Stach Date: Wed Apr 6 18:37:00 2022 +0200 irqchip/imx-irqsteer: Constify irq_chip struct [ Upstream commit e9a50f12e579a48e124ac5adb93dafc35f0a46b8 ] The imx_irqsteer_irq_chip struct is constant data. Signed-off-by: Lucas Stach Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20220406163701.1277930-1-l.stach@pengutronix.de Stable-dep-of: 33b1c47d1fc0 ("irqchip/imx-irqsteer: Handle runtime power management correctly") Signed-off-by: Sasha Levin commit 9951e76f3988cc7157174e805ac5e9c2815995b7 Author: Marc Zyngier Date: Tue Feb 1 12:02:59 2022 +0000 genirq: Allow the PM device to originate from irq domain [ Upstream commit 1f8863bfb5ca500ea1c7669b16b1931ba27fce20 ] As a preparation to moving the reference to the device used for runtime power management, add a new 'dev' field to the irqdomain structure for that exact purpose. The irq_chip_pm_{get,put}() helpers are made aware of the dual location via a new private helper. No functional change intended. Signed-off-by: Marc Zyngier Reviewed-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven Tested-by: Tony Lindgren Acked-by: Bartosz Golaszewski Link: https://lore.kernel.org/r/20220201120310.878267-2-maz@kernel.org Stable-dep-of: 33b1c47d1fc0 ("irqchip/imx-irqsteer: Handle runtime power management correctly") Signed-off-by: Sasha Levin commit b044588a16a978cd891cb3d665dd7ae06850d5bf Author: Zijun Hu Date: Tue Jul 2 22:51:51 2024 +0800 devres: Fix memory leakage caused by driver API devm_free_percpu() [ Upstream commit bd50a974097bb82d52a458bd3ee39fb723129a0c ] It will cause memory leakage when use driver API devm_free_percpu() to free memory allocated by devm_alloc_percpu(), fixed by using devres_release() instead of devres_destroy() within devm_free_percpu(). Fixes: ff86aae3b411 ("devres: add devm_alloc_percpu()") Cc: stable@vger.kernel.org Signed-off-by: Zijun Hu Link: https://lore.kernel.org/r/1719931914-19035-3-git-send-email-quic_zijuhu@quicinc.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 00d780681e601c20670d2a40f9647c58292e0ed4 Author: Andy Shevchenko Date: Thu Apr 1 20:10:30 2021 +0300 driver core: Cast to (void *) with __force for __percpu pointer [ Upstream commit d7aa44f5a1f86cb40659eef06035d8d92604b9d5 ] Sparse is not happy: drivers/base/devres.c:1230:9: warning: cast removes address space '__percpu' of expression Use __force attribute to make it happy. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20210401171030.60527-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: bd50a974097b ("devres: Fix memory leakage caused by driver API devm_free_percpu()") Signed-off-by: Sasha Levin commit 47b3dce100778001cd76f7e9188944b5cb27a76d Author: tuhaowen Date: Mon Jul 8 16:04:30 2024 +0800 dev/parport: fix the array out-of-bounds risk [ Upstream commit ab11dac93d2d568d151b1918d7b84c2d02bacbd5 ] Fixed array out-of-bounds issues caused by sprintf by replacing it with snprintf for safer data copying, ensuring the destination buffer is not overflowed. Below is the stack trace I encountered during the actual issue: [ 66.575408s] [pid:5118,cpu4,QThread,4]Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: do_hardware_base_addr+0xcc/0xd0 [parport] [ 66.575408s] [pid:5118,cpu4,QThread,5]CPU: 4 PID: 5118 Comm: QThread Tainted: G S W O 5.10.97-arm64-desktop #7100.57021.2 [ 66.575439s] [pid:5118,cpu4,QThread,6]TGID: 5087 Comm: EFileApp [ 66.575439s] [pid:5118,cpu4,QThread,7]Hardware name: HUAWEI HUAWEI QingYun PGUX-W515x-B081/SP1PANGUXM, BIOS 1.00.07 04/29/2024 [ 66.575439s] [pid:5118,cpu4,QThread,8]Call trace: [ 66.575469s] [pid:5118,cpu4,QThread,9] dump_backtrace+0x0/0x1c0 [ 66.575469s] [pid:5118,cpu4,QThread,0] show_stack+0x14/0x20 [ 66.575469s] [pid:5118,cpu4,QThread,1] dump_stack+0xd4/0x10c [ 66.575500s] [pid:5118,cpu4,QThread,2] panic+0x1d8/0x3bc [ 66.575500s] [pid:5118,cpu4,QThread,3] __stack_chk_fail+0x2c/0x38 [ 66.575500s] [pid:5118,cpu4,QThread,4] do_hardware_base_addr+0xcc/0xd0 [parport] Signed-off-by: tuhaowen Cc: stable Link: https://lore.kernel.org/r/20240708080430.8221-1-tuhaowen@uniontech.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit fca2fe16706567797f18a73252e5fdb8cc826051 Author: Joe Perches Date: Fri Apr 3 14:43:22 2020 +0100 parport: Standardize use of printmode [ Upstream commit a6abfdff4fe5dd19d1f1b37d72ba34cd4492fd4d ] Standardize the define and the uses of printmode. Miscellanea: o Add missing statement termination ; where necessary Signed-off-by: Joe Perches Reviewed-by: Randy Dunlap Signed-off-by: Sudip Mukherjee Link: https://lore.kernel.org/r/20200403134325.11523-8-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: ab11dac93d2d ("dev/parport: fix the array out-of-bounds risk") Signed-off-by: Sasha Levin commit 92f405a7f118faa89a1450c0201e305838c37b45 Author: Joe Perches Date: Fri Apr 3 14:43:16 2020 +0100 parport: Convert printk(KERN_ to pr_( [ Upstream commit decf26f6ec25dac868782dc1751623a87d147831 ] Use the more common kernel style. Miscellanea: o Coalesce formats o Realign arguments Signed-off-by: Joe Perches Reviewed-by: Randy Dunlap Signed-off-by: Sudip Mukherjee Link: https://lore.kernel.org/r/20200403134325.11523-2-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: ab11dac93d2d ("dev/parport: fix the array out-of-bounds risk") Signed-off-by: Sasha Levin commit bbfcb2a4bc894896c6794b664884a2b36299b974 Author: Manivannan Sadhasivam Date: Tue Apr 16 11:12:35 2024 +0530 PCI: rockchip: Use GPIOD_OUT_LOW flag while requesting ep_gpio [ Upstream commit 840b7a5edf88fe678c60dee88a135647c0ea4375 ] Rockchip platforms use 'GPIO_ACTIVE_HIGH' flag in the devicetree definition for ep_gpio. This means, whatever the logical value set by the driver for the ep_gpio, physical line will output the same logic level. For instance, gpiod_set_value_cansleep(rockchip->ep_gpio, 0); --> Level low gpiod_set_value_cansleep(rockchip->ep_gpio, 1); --> Level high But while requesting the ep_gpio, GPIOD_OUT_HIGH flag is currently used. Now, this also causes the physical line to output 'high' creating trouble for endpoint devices during host reboot. When host reboot happens, the ep_gpio will initially output 'low' due to the GPIO getting reset to its POR value. Then during host controller probe, it will output 'high' due to GPIOD_OUT_HIGH flag. Then during rockchip_pcie_host_init_port(), it will first output 'low' and then 'high' indicating the completion of controller initialization. On the endpoint side, each output 'low' of ep_gpio is accounted for PERST# assert and 'high' for PERST# deassert. With the above mentioned flow during host reboot, endpoint will witness below state changes for PERST#: (1) PERST# assert - GPIO POR state (2) PERST# deassert - GPIOD_OUT_HIGH while requesting GPIO (3) PERST# assert - rockchip_pcie_host_init_port() (4) PERST# deassert - rockchip_pcie_host_init_port() Now the time interval between (2) and (3) is very short as both happen during the driver probe(), and this results in a race in the endpoint. Because, before completing the PERST# deassertion in (2), endpoint got another PERST# assert in (3). A proper way to fix this issue is to change the GPIOD_OUT_HIGH flag in (2) to GPIOD_OUT_LOW. Because the usual convention is to request the GPIO with a state corresponding to its 'initial/default' value and let the driver change the state of the GPIO when required. As per that, the ep_gpio should be requested with GPIOD_OUT_LOW as it corresponds to the POR value of '0' (PERST# assert in the endpoint). Then the driver can change the state of the ep_gpio later in rockchip_pcie_host_init_port() as per the initialization sequence. This fixes the firmware crash issue in Qcom based modems connected to Rockpro64 based board. Fixes: e77f847df54c ("PCI: rockchip: Add Rockchip PCIe controller support") Closes: https://lore.kernel.org/mhi/20240402045647.GG2933@thinkpad/ Link: https://lore.kernel.org/linux-pci/20240416-pci-rockchip-perst-fix-v1-1-4800b1d4d954@linaro.org Reported-by: Slark Xiao Signed-off-by: Manivannan Sadhasivam Signed-off-by: Krzysztof Wilczyński Signed-off-by: Bjorn Helgaas Reviewed-by: Niklas Cassel Cc: stable@vger.kernel.org # v4.9 Signed-off-by: Sasha Levin commit c72ddaebcd64fc0fec7afb404b78264c27675808 Author: Chen-Yu Tsai Date: Fri Jan 22 00:23:18 2021 +0800 PCI: rockchip: Make 'ep-gpios' DT property optional [ Upstream commit 58adbfb3ebec460e8b58875c682bafd866808e80 ] The Rockchip PCIe controller DT binding clearly states that 'ep-gpios' is an optional property. And indeed there are boards that don't require it. Make the driver follow the binding by using devm_gpiod_get_optional() instead of devm_gpiod_get(). [bhelgaas: tidy whitespace] Link: https://lore.kernel.org/r/20210121162321.4538-2-wens@kernel.org Fixes: e77f847df54c ("PCI: rockchip: Add Rockchip PCIe controller support") Fixes: 956cd99b35a8 ("PCI: rockchip: Separate common code from RC driver") Fixes: 964bac9455be ("PCI: rockchip: Split out rockchip_pcie_parse_dt() to parse DT") Signed-off-by: Chen-Yu Tsai Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Stable-dep-of: 840b7a5edf88 ("PCI: rockchip: Use GPIOD_OUT_LOW flag while requesting ep_gpio") Signed-off-by: Sasha Levin commit 4d3817b64eda07491bdd86a234629fe0764fb42a Author: Jan Kara Date: Fri Jun 21 16:42:38 2024 +0200 mm: avoid overflows in dirty throttling logic [ Upstream commit 385d838df280eba6c8680f9777bfa0d0bfe7e8b2 ] The dirty throttling logic is interspersed with assumptions that dirty limits in PAGE_SIZE units fit into 32-bit (so that various multiplications fit into 64-bits). If limits end up being larger, we will hit overflows, possible divisions by 0 etc. Fix these problems by never allowing so large dirty limits as they have dubious practical value anyway. For dirty_bytes / dirty_background_bytes interfaces we can just refuse to set so large limits. For dirty_ratio / dirty_background_ratio it isn't so simple as the dirty limit is computed from the amount of available memory which can change due to memory hotplug etc. So when converting dirty limits from ratios to numbers of pages, we just don't allow the result to exceed UINT_MAX. This is root-only triggerable problem which occurs when the operator sets dirty limits to >16 TB. Link: https://lkml.kernel.org/r/20240621144246.11148-2-jack@suse.cz Signed-off-by: Jan Kara Reported-by: Zach O'Keefe Reviewed-By: Zach O'Keefe Cc: Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 3f8ec1d6b0ebd8268307d52be8301973fa5a01ec Author: Leon Romanovsky Date: Wed Jul 24 13:31:14 2024 +0300 nvme-pci: add missing condition check for existence of mapped data [ Upstream commit c31fad1470389666ac7169fe43aa65bf5b7e2cfd ] nvme_map_data() is called when request has physical segments, hence the nvme_unmap_data() should have same condition to avoid dereference. Fixes: 4aedb705437f ("nvme-pci: split metadata handling from nvme_map_data / nvme_unmap_data") Signed-off-by: Leon Romanovsky Reviewed-by: Christoph Hellwig Reviewed-by: Nitesh Shetty Signed-off-by: Keith Busch Signed-off-by: Sasha Levin commit 035333dddd42d7cac52606e3fdc361532480c95c Author: Pierre-Louis Bossart Date: Mon Jul 22 10:30:02 2024 +0200 ASoC: Intel: use soc_intel_is_byt_cr() only when IOSF_MBI is reachable [ Upstream commit 9931f7d5d251882a147cc5811060097df43e79f5 ] the Intel kbuild bot reports a link failure when IOSF_MBI is built-in but the Merrifield driver is configured as a module. The soc-intel-quirks.h is included for Merrifield platforms, but IOSF_MBI is not selected for that platform. ld.lld: error: undefined symbol: iosf_mbi_read >>> referenced by atom.c >>> sound/soc/sof/intel/atom.o:(atom_machine_select) in archive vmlinux.a This patch forces the use of the fallback static inline when IOSF_MBI is not reachable. Fixes: 536cfd2f375d ("ASoC: Intel: use common helpers to detect CPUs") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202407160704.zpdhJ8da-lkp@intel.com/ Suggested-by: Takashi Iwai Signed-off-by: Pierre-Louis Bossart Reviewed-by: Péter Ujfalusi Reviewed-by: Bard Liao Link: https://patch.msgid.link/20240722083002.10800-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 41aa8b71b5dde9608bc028cf83bf16cfd65e829b Author: Hans de Goede Date: Mon Oct 18 16:33:22 2021 +0200 ASoC: Intel: Move soc_intel_is_foo() helpers to a generic header [ Upstream commit cd45c9bf8b43cd387e167cf166ae5c517f56d658 ] The soc_intel_is_foo() helpers from sound/soc/intel/common/soc-intel-quirks.h are useful outside of the sound subsystem too. Move these to include/linux/platform_data/x86/soc.h, so that other code can use them too. Suggested-by: Andy Shevchenko Reviewed-by: Andy Shevchenko Acked-by: Mark Brown Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20211018143324.296961-2-hdegoede@redhat.com Stable-dep-of: 9931f7d5d251 ("ASoC: Intel: use soc_intel_is_byt_cr() only when IOSF_MBI is reachable") Signed-off-by: Sasha Levin commit 9dff804bd8a9b92fa59e86d1a3d7939beafc8f8e Author: Thomas Gleixner Date: Fri Mar 20 14:14:04 2020 +0100 ASoC: Intel: Convert to new X86 CPU match macros [ Upstream commit d51ba9c6663d7171681be357f672503f4e2ccdc1 ] The new macro set has a consistent namespace and uses C99 initializers instead of the grufty C89 ones. Get rid the of the local macro wrappers for consistency. Signed-off-by: Thomas Gleixner Signed-off-by: Borislav Petkov Reviewed-by: Greg Kroah-Hartman Link: https://lkml.kernel.org/r/20200320131510.594671507@linutronix.de Stable-dep-of: 9931f7d5d251 ("ASoC: Intel: use soc_intel_is_byt_cr() only when IOSF_MBI is reachable") Signed-off-by: Sasha Levin commit d4001bd3b46af77cf0f663bdeb08c8f874695476 Author: Al Viro Date: Thu May 30 23:54:55 2024 -0400 powerpc: fix a file leak in kvm_vcpu_ioctl_enable_cap() [ Upstream commit b4cf5fc01ce83e5c0bcf3dbb9f929428646b9098 ] missing fdput() on one of the failure exits Fixes: eacc56bb9de3e # v5.2 Signed-off-by: Al Viro Signed-off-by: Sasha Levin commit 0abe35bc48d4ec80424b1f4b3560c0e082cbd5c1 Author: Xiao Liang Date: Sat Sep 2 08:48:38 2023 +0800 apparmor: Fix null pointer deref when receiving skb during sock creation [ Upstream commit fce09ea314505a52f2436397608fa0a5d0934fb1 ] The panic below is observed when receiving ICMP packets with secmark set while an ICMP raw socket is being created. SK_CTX(sk)->label is updated in apparmor_socket_post_create(), but the packet is delivered to the socket before that, causing the null pointer dereference. Drop the packet if label context is not set. BUG: kernel NULL pointer dereference, address: 000000000000004c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 407 Comm: a.out Not tainted 6.4.12-arch1-1 #1 3e6fa2753a2d75925c34ecb78e22e85a65d083df Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/28/2020 RIP: 0010:aa_label_next_confined+0xb/0x40 Code: 00 00 48 89 ef e8 d5 25 0c 00 e9 66 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 89 f0 <8b> 77 4c 39 c6 7e 1f 48 63 d0 48 8d 14 d7 eb 0b 83 c0 01 48 83 c2 RSP: 0018:ffffa92940003b08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000e RDX: ffffa92940003be8 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff8b57471e7800 R08: ffff8b574c642400 R09: 0000000000000002 R10: ffffffffbd820eeb R11: ffffffffbeb7ff00 R12: ffff8b574c642400 R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000000 FS: 00007fb092ea7640(0000) GS:ffff8b577bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000004c CR3: 00000001020f2005 CR4: 00000000007706f0 PKRU: 55555554 Call Trace: ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? aa_label_next_confined+0xb/0x40 apparmor_secmark_check+0xec/0x330 security_sock_rcv_skb+0x35/0x50 sk_filter_trim_cap+0x47/0x250 sock_queue_rcv_skb_reason+0x20/0x60 raw_rcv+0x13c/0x210 raw_local_deliver+0x1f3/0x250 ip_protocol_deliver_rcu+0x4f/0x2f0 ip_local_deliver_finish+0x76/0xa0 __netif_receive_skb_one_core+0x89/0xa0 netif_receive_skb+0x119/0x170 ? __netdev_alloc_skb+0x3d/0x140 vmxnet3_rq_rx_complete+0xb23/0x1010 [vmxnet3 56a84f9c97178c57a43a24ec073b45a9d6f01f3a] vmxnet3_poll_rx_only+0x36/0xb0 [vmxnet3 56a84f9c97178c57a43a24ec073b45a9d6f01f3a] __napi_poll+0x28/0x1b0 net_rx_action+0x2a4/0x380 __do_softirq+0xd1/0x2c8 __irq_exit_rcu+0xbb/0xf0 common_interrupt+0x86/0xa0 asm_common_interrupt+0x26/0x40 RIP: 0010:apparmor_socket_post_create+0xb/0x200 Code: 08 48 85 ff 75 a1 eb b1 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 <55> 48 89 fd 53 45 85 c0 0f 84 b2 00 00 00 48 8b 1d 80 56 3f 02 48 RSP: 0018:ffffa92940ce7e50 EFLAGS: 00000286 RAX: ffffffffbc756440 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000003 RSI: 0000000000000002 RDI: ffff8b574eaab740 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8b57444cec70 R11: 0000000000000000 R12: 0000000000000003 R13: 0000000000000002 R14: ffff8b574eaab740 R15: ffffffffbd8e4748 ? __pfx_apparmor_socket_post_create+0x10/0x10 security_socket_post_create+0x4b/0x80 __sock_create+0x176/0x1f0 __sys_socket+0x89/0x100 __x64_sys_socket+0x17/0x20 do_syscall_64+0x5d/0x90 ? do_syscall_64+0x6c/0x90 ? do_syscall_64+0x6c/0x90 ? do_syscall_64+0x6c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Fixes: ab9f2115081a ("apparmor: Allow filtering based on secmark policy") Signed-off-by: Xiao Liang Signed-off-by: John Johansen Signed-off-by: Sasha Levin commit d3e4d4a98c5629ccdcb762a0ff6c82ba9738a0c3 Author: Dan Carpenter Date: Wed Jul 24 11:08:18 2024 -0500 mISDN: Fix a use after free in hfcmulti_tx() [ Upstream commit 61ab751451f5ebd0b98e02276a44e23a10110402 ] Don't dereference *sp after calling dev_kfree_skb(*sp). Fixes: af69fb3a8ffa ("Add mISDN HFC multiport driver") Signed-off-by: Dan Carpenter Reviewed-by: Simon Horman Link: https://patch.msgid.link/8be65f5a-c2dd-4ba0-8a10-bfe5980b8cfb@stanley.mountain Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit a689f5eb13a90f892a088865478b3cd39f53d5dc Author: Fred Li Date: Fri Jul 19 10:46:53 2024 +0800 bpf: Fix a segment issue when downgrading gso_size [ Upstream commit fa5ef655615a01533035c6139248c5b33aa27028 ] Linearize the skb when downgrading gso_size because it may trigger a BUG_ON() later when the skb is segmented as described in [1,2]. Fixes: 2be7e212d5419 ("bpf: add bpf_skb_adjust_room helper") Signed-off-by: Fred Li Signed-off-by: Daniel Borkmann Reviewed-by: Willem de Bruijn Acked-by: Daniel Borkmann Link: https://lore.kernel.org/all/20240626065555.35460-2-dracodingfly@gmail.com [1] Link: https://lore.kernel.org/all/668d5cf1ec330_1c18c32947@willemb.c.googlers.com.notmuch [2] Link: https://lore.kernel.org/bpf/20240719024653.77006-1-dracodingfly@gmail.com Signed-off-by: Sasha Levin commit fd06cb4a5fc7bda3dea31712618a62af72a1c6cb Author: Petr Machata Date: Tue Jul 23 18:04:16 2024 +0200 net: nexthop: Initialize all fields in dumped nexthops [ Upstream commit 6d745cd0e9720282cd291d36b9db528aea18add2 ] struct nexthop_grp contains two reserved fields that are not initialized by nla_put_nh_group(), and carry garbage. This can be observed e.g. with strace (edited for clarity): # ip nexthop add id 1 dev lo # ip nexthop add id 101 group 1 # strace -e recvmsg ip nexthop get id 101 ... recvmsg(... [{nla_len=12, nla_type=NHA_GROUP}, [{id=1, weight=0, resvd1=0x69, resvd2=0x67}]] ...) = 52 The fields are reserved and therefore not currently used. But as they are, they leak kernel memory, and the fact they are not just zero complicates repurposing of the fields for new ends. Initialize the full structure. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: Petr Machata Reviewed-by: Ido Schimmel Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 253405541be2f15ffebdeac2f4cf4b7e9144d12f Author: Shigeru Yoshida Date: Tue Jul 16 11:09:05 2024 +0900 tipc: Return non-zero value from tipc_udp_addr2str() on error [ Upstream commit fa96c6baef1b5385e2f0c0677b32b3839e716076 ] tipc_udp_addr2str() should return non-zero value if the UDP media address is invalid. Otherwise, a buffer overflow access can occur in tipc_media_addr_printf(). Fix this by returning 1 on an invalid UDP media address. Fixes: d0f91938bede ("tipc: add ip/udp media type") Signed-off-by: Shigeru Yoshida Reviewed-by: Tung Nguyen Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 507bf56d42ca6b632d838cc2ac99403f8eee79fd Author: Johannes Berg Date: Fri Jul 19 09:41:18 2024 -0700 net: bonding: correctly annotate RCU in bond_should_notify_peers() [ Upstream commit 3ba359c0cd6eb5ea772125a7aededb4a2d516684 ] RCU use in bond_should_notify_peers() looks wrong, since it does rcu_dereference(), leaves the critical section, and uses the pointer after that. Luckily, it's called either inside a nested RCU critical section or with the RTNL held. Annotate it with rcu_dereference_rtnl() instead, and remove the inner RCU critical section. Fixes: 4cb4f97b7e36 ("bonding: rebuild the lock use for bond_mii_monitor()") Reviewed-by: Jiri Pirko Signed-off-by: Johannes Berg Acked-by: Jay Vosburgh Link: https://patch.msgid.link/20240719094119.35c62455087d.I68eb9c0f02545b364b79a59f2110f2cf5682a8e2@changeid Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 8ea16df99dcdfb79b1a4bbed4ebae629c406f40b Author: Ido Schimmel Date: Thu Jul 18 15:34:07 2024 +0300 ipv4: Fix incorrect source address in Record Route option [ Upstream commit cc73bbab4b1fb8a4f53a24645871dafa5f81266a ] The Record Route IP option records the addresses of the routers that routed the packet. In the case of forwarded packets, the kernel performs a route lookup via fib_lookup() and fills in the preferred source address of the matched route. The lookup is performed with the DS field of the forwarded packet, but using the RT_TOS() macro which only masks one of the two ECN bits. If the packet is ECT(0) or CE, the matched route might be different than the route via which the packet was forwarded as the input path masks both of the ECN bits, resulting in the wrong address being filled in the Record Route option. Fix by masking both of the ECN bits. Fixes: 8e36360ae876 ("ipv4: Remove route key identity dependencies in ip_rt_get_source().") Signed-off-by: Ido Schimmel Reviewed-by: Guillaume Nault Link: https://patch.msgid.link/20240718123407.434778-1-idosch@nvidia.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit f19db930ae326351f71c241b41b8f19d58a936ca Author: Gregory CLEMENT Date: Mon Jul 22 15:15:39 2024 +0200 MIPS: SMP-CPS: Fix address for GCR_ACCESS register for CM3 and later [ Upstream commit a263e5f309f32301e1f3ad113293f4e68a82a646 ] When the CM block migrated from CM2.5 to CM3.0, the address offset for the Global CSR Access Privilege register was modified. We saw this in the "MIPS64 I6500 Multiprocessing System Programmer's Guide," it is stated that "the Global CSR Access Privilege register is located at offset 0x0120" in section 5.4. It is at least the same for I6400. This fix allows to use the VP cores in SMP mode if the reset values were modified by the bootloader. Based on the work of Vladimir Kondratiev and the feedback from Jiaxun Yang . Fixes: 197e89e0984a ("MIPS: mips-cm: Implement mips_cm_revision") Signed-off-by: Gregory CLEMENT Reviewed-by: Jiaxun Yang Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin commit 2f7bbdc744f2e7051d1cb47c8e082162df1923c9 Author: Lance Richardson Date: Thu Jul 18 14:38:24 2024 +0000 dma: fix call order in dmam_free_coherent [ Upstream commit 28e8b7406d3a1f5329a03aa25a43aa28e087cb20 ] dmam_free_coherent() frees a DMA allocation, which makes the freed vaddr available for reuse, then calls devres_destroy() to remove and free the data structure used to track the DMA allocation. Between the two calls, it is possible for a concurrent task to make an allocation with the same vaddr and add it to the devres list. If this happens, there will be two entries in the devres list with the same vaddr and devres_destroy() can free the wrong entry, triggering the WARN_ON() in dmam_match. Fix by destroying the devres entry before freeing the DMA allocation. Tested: kokonut //net/encryption http://sponge2/b9145fe6-0f72-4325-ac2f-a84d81075b03 Fixes: 9ac7849e35f7 ("devres: device resource management") Signed-off-by: Lance Richardson Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin commit 6a8a0da4d84a4018c210c043d4331945a524ba29 Author: Andrii Nakryiko Date: Fri Jul 12 15:44:42 2024 -0700 libbpf: Fix no-args func prototype BTF dumping syntax [ Upstream commit 189f1a976e426011e6a5588f1d3ceedf71fe2965 ] For all these years libbpf's BTF dumper has been emitting not strictly valid syntax for function prototypes that have no input arguments. Instead of `int (*blah)()` we should emit `int (*blah)(void)`. This is not normally a problem, but it manifests when we get kfuncs in vmlinux.h that have no input arguments. Due to compiler internal specifics, we get no BTF information for such kfuncs, if they are not declared with proper `(void)`. The fix is trivial. We also need to adjust a few ancient tests that happily assumed `()` is correct. Fixes: 351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion") Reported-by: Tejun Heo Signed-off-by: Andrii Nakryiko Signed-off-by: Daniel Borkmann Acked-by: Stanislav Fomichev Link: https://lore.kernel.org/bpf/20240712224442.282823-1-andrii@kernel.org Signed-off-by: Sasha Levin commit f4eee3607202144a29158848f325f9f08be85e10 Author: Johannes Berg Date: Wed Apr 17 10:27:45 2024 +0200 um: time-travel: fix time-travel-start option [ Upstream commit 7d0a8a490aa3a2a82de8826aaf1dfa38575cb77a ] We need to have the = as part of the option so that the value can be parsed properly. Also document that it must be given in nanoseconds, not seconds. Fixes: 065038706f77 ("um: Support time travel mode") Link: https://patch.msgid.link/20240417102744.14b9a9d4eba0.Ib22e9136513126b2099d932650f55f193120cd97@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 9b3a4345957f5372041bc4f59de322f62653e862 Author: Jeongjun Park Date: Thu May 30 22:28:09 2024 +0900 jfs: Fix array-index-out-of-bounds in diFree [ Upstream commit f73f969b2eb39ad8056f6c7f3a295fa2f85e313a ] Reported-by: syzbot+241c815bda521982cb49@syzkaller.appspotmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jeongjun Park Signed-off-by: Dave Kleikamp Signed-off-by: Sasha Levin commit c06023caca61f79534f7e83a8edc4f22333e1d15 Author: Douglas Anderson Date: Tue May 28 07:11:48 2024 -0700 kdb: Use the passed prompt in kdb_position_cursor() [ Upstream commit e2e821095949cde46256034975a90f88626a2a73 ] The function kdb_position_cursor() takes in a "prompt" parameter but never uses it. This doesn't _really_ matter since all current callers of the function pass the same value and it's a global variable, but it's a bit ugly. Let's clean it up. Found by code inspection. This patch is expected to functionally be a no-op. Fixes: 09b35989421d ("kdb: Use format-strings rather than '\0' injection in kdb_read()") Signed-off-by: Douglas Anderson Link: https://lore.kernel.org/r/20240528071144.1.I0feb49839c6b6f4f2c4bf34764f5e95de3f55a66@changeid Signed-off-by: Daniel Thompson Signed-off-by: Sasha Levin commit 128037541177797af9cefcdf3e06841e77a77f32 Author: Arnd Bergmann Date: Tue May 28 14:11:48 2024 +0200 kdb: address -Wformat-security warnings [ Upstream commit 70867efacf4370b6c7cdfc7a5b11300e9ef7de64 ] When -Wformat-security is not disabled, using a string pointer as a format causes a warning: kernel/debug/kdb/kdb_io.c: In function 'kdb_read': kernel/debug/kdb/kdb_io.c:365:36: error: format not a string literal and no format arguments [-Werror=format-security] 365 | kdb_printf(kdb_prompt_str); | ^~~~~~~~~~~~~~ kernel/debug/kdb/kdb_io.c: In function 'kdb_getstr': kernel/debug/kdb/kdb_io.c:456:20: error: format not a string literal and no format arguments [-Werror=format-security] 456 | kdb_printf(kdb_prompt_str); | ^~~~~~~~~~~~~~ Use an explcit "%s" format instead. Signed-off-by: Arnd Bergmann Fixes: 5d5314d6795f ("kdb: core for kgdb back end (1 of 2)") Reviewed-by: Douglas Anderson Link: https://lore.kernel.org/r/20240528121154.3662553-1-arnd@kernel.org Signed-off-by: Daniel Thompson Signed-off-by: Sasha Levin commit 02b87e6334a38c65eef49848d3f1ac422f0b2a44 Author: Ryusuke Konishi Date: Thu Jul 25 14:20:07 2024 +0900 nilfs2: handle inconsistent state in nilfs_btnode_create_block() commit 4811f7af6090e8f5a398fbdd766f903ef6c0d787 upstream. Syzbot reported that a buffer state inconsistency was detected in nilfs_btnode_create_block(), triggering a kernel bug. It is not appropriate to treat this inconsistency as a bug; it can occur if the argument block address (the buffer index of the newly created block) is a virtual block number and has been reallocated due to corruption of the bitmap used to manage its allocation state. So, modify nilfs_btnode_create_block() and its callers to treat it as a possible filesystem error, rather than triggering a kernel bug. Link: https://lkml.kernel.org/r/20240725052007.4562-1-konishi.ryusuke@gmail.com Fixes: a60be987d45d ("nilfs2: B-tree node cache") Signed-off-by: Ryusuke Konishi Reported-by: syzbot+89cc4f2324ed37988b60@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=89cc4f2324ed37988b60 Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 17290401141aa8cb4a835ed18556a1830d991608 Author: WangYuli Date: Sat Jun 22 12:09:59 2024 +0800 Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x13d3:0x3591 commit 473a89b4ed7fd52a419340f7c540d5c8fc96fc75 upstream. Add the support ID(0x13d3, 0x3591) to usb_device_id table for Realtek RTL8852BE. The device table is as follows: T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3591 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Cc: stable@vger.kernel.org Signed-off-by: Wentao Guan Signed-off-by: WangYuli Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Erpeng Xu Signed-off-by: Greg Kroah-Hartman commit 3b5bcca85831dd1068e683a40246993c5ae1561e Author: Hilda Wu Date: Mon Jun 17 17:05:18 2024 +0800 Bluetooth: btusb: Add RTL8852BE device 0489:e125 to device tables commit 295ef07a9dae6182ad4b689aa8c6a7dbba21474c upstream. Add the support ID 0489:e125 to usb_device_id table for Realtek RTL8852B chip. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e125 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hilda Wu Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Erpeng Xu Signed-off-by: Greg Kroah-Hartman commit 46c0fa486bb84a29300ff4e4dfa4c0c4676e8a42 Author: Ilya Dryomov Date: Tue Jul 23 18:07:59 2024 +0200 rbd: don't assume RBD_LOCK_STATE_LOCKED for exclusive mappings commit 2237ceb71f89837ac47c5dce2aaa2c2b3a337a3c upstream. Every time a watch is reestablished after getting lost, we need to update the cookie which involves quiescing exclusive lock. For this, we transition from RBD_LOCK_STATE_LOCKED to RBD_LOCK_STATE_QUIESCING roughly for the duration of rbd_reacquire_lock() call. If the mapping is exclusive and I/O happens to arrive in this time window, it's failed with EROFS (later translated to EIO) based on the wrong assumption in rbd_img_exclusive_lock() -- "lock got released?" check there stopped making sense with commit a2b1da09793d ("rbd: lock should be quiesced on reacquire"). To make it worse, any such I/O is added to the acquiring list before EROFS is returned and this sets up for violating rbd_lock_del_request() precondition that the request is either on the running list or not on any list at all -- see commit ded080c86b3f ("rbd: don't move requests to the running list on errors"). rbd_lock_del_request() ends up processing these requests as if they were on the running list which screws up quiescing_wait completion counter and ultimately leads to rbd_assert(!completion_done(&rbd_dev->quiescing_wait)); being triggered on the next watch error. Cc: stable@vger.kernel.org # 06ef84c4e9c4: rbd: rename RBD_LOCK_STATE_RELEASING and releasing_wait Cc: stable@vger.kernel.org Fixes: 637cd060537d ("rbd: new exclusive lock wait/wake code") Signed-off-by: Ilya Dryomov Reviewed-by: Dongsheng Yang Signed-off-by: Greg Kroah-Hartman commit 0a99aa6ca324a849cacd5ce08a4cc19bd77b7b1d Author: Ilya Dryomov Date: Tue Jul 23 17:54:39 2024 +0200 rbd: rename RBD_LOCK_STATE_RELEASING and releasing_wait commit f5c466a0fdb2d9f3650d2e3911b0735f17ba00cf upstream. ... to RBD_LOCK_STATE_QUIESCING and quiescing_wait to recognize that this state and the associated completion are backing rbd_quiesce_lock(), which isn't specific to releasing the lock. While exclusive lock does get quiesced before it's released, it also gets quiesced before an attempt to update the cookie is made and there the lock is not released as long as ceph_cls_set_cookie() succeeds. Signed-off-by: Ilya Dryomov Reviewed-by: Dongsheng Yang Signed-off-by: Greg Kroah-Hartman commit 7d8e5712f3ea6bb71f2c427af8028d0c4d879be7 Author: Dragan Simic Date: Mon Jun 17 22:17:48 2024 +0200 drm/panfrost: Mark simple_ondemand governor as softdep commit 80f4e62730a91572b7fdc657f7bb747e107ae308 upstream. Panfrost DRM driver uses devfreq to perform DVFS, while using simple_ondemand devfreq governor by default. This causes driver initialization to fail on boot when simple_ondemand governor isn't built into the kernel statically, as a result of the missing module dependency and, consequently, the required governor module not being included in the initial ramdisk. Thus, let's mark simple_ondemand governor as a softdep for Panfrost, to have its kernel module included in the initial ramdisk. This is a rather longstanding issue that has forced distributions to build devfreq governors statically into their kernels, [1][2] or has forced users to introduce some unnecessary workarounds. [3] For future reference, not having support for the simple_ondemand governor in the initial ramdisk produces errors in the kernel log similar to these below, which were taken from a Pine64 RockPro64: panfrost ff9a0000.gpu: [drm:panfrost_devfreq_init [panfrost]] *ERROR* Couldn't initialize GPU devfreq panfrost ff9a0000.gpu: Fatal error during GPU init panfrost: probe of ff9a0000.gpu failed with error -22 Having simple_ondemand marked as a softdep for Panfrost may not resolve this issue for all Linux distributions. In particular, it will remain unresolved for the distributions whose utilities for the initial ramdisk generation do not handle the available softdep information [4] properly yet. However, some Linux distributions already handle softdeps properly while generating their initial ramdisks, [5] and this is a prerequisite step in the right direction for the distributions that don't handle them properly yet. [1] https://gitlab.manjaro.org/manjaro-arm/packages/core/linux/-/blob/linux61/config?ref_type=heads#L8180 [2] https://salsa.debian.org/kernel-team/linux/-/merge_requests/1066 [3] https://forum.pine64.org/showthread.php?tid=15458 [4] https://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git/commit/?id=49d8e0b59052999de577ab732b719cfbeb89504d [5] https://github.com/archlinux/mkinitcpio/commit/97ac4d37aae084a050be512f6d8f4489054668ad Cc: Diederik de Haas Cc: Furkan Kardame Cc: stable@vger.kernel.org Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver") Signed-off-by: Dragan Simic Reviewed-by: Steven Price Reviewed-by: Boris Brezillon Signed-off-by: Steven Price Link: https://patchwork.freedesktop.org/patch/msgid/4e1e00422a14db4e2a80870afb704405da16fd1b.1718655077.git.dsimic@manjaro.org Signed-off-by: Greg Kroah-Hartman commit f54a096195f3180c0999dca408bf8a63166c66a6 Author: Ilya Dryomov Date: Tue Jul 23 18:08:08 2024 +0200 rbd: don't assume rbd_is_lock_owner() for exclusive mappings commit 3ceccb14f5576e02b81cc8b105ab81f224bd87f6 upstream. Expanding on the previous commit, assuming that rbd_is_lock_owner() always returns true (i.e. that we are either in RBD_LOCK_STATE_LOCKED or RBD_LOCK_STATE_QUIESCING) if the mapping is exclusive is wrong too. In case ceph_cls_set_cookie() fails, the lock would be temporarily released even if the mapping is exclusive, meaning that we can end up even in RBD_LOCK_STATE_UNLOCKED. IOW, exclusive mappings are really "just" about disabling automatic lock transitions (as documented in the man page), not about grabbing the lock and holding on to it whatever it takes. Cc: stable@vger.kernel.org Fixes: 637cd060537d ("rbd: new exclusive lock wait/wake code") Signed-off-by: Ilya Dryomov Reviewed-by: Dongsheng Yang Signed-off-by: Greg Kroah-Hartman commit 796bdd9a9b6dc5b2ab76aa6e3cd3399f1571d42f Author: Michael Ellerman Date: Mon May 20 16:26:47 2024 +1000 selftests/sigaltstack: Fix ppc64 GCC build commit 17c743b9da9e0d073ff19fd5313f521744514939 upstream. Building the sigaltstack test with GCC on 64-bit powerpc errors with: gcc -Wall sas.c -o /home/michael/linux/.build/kselftest/sigaltstack/sas In file included from sas.c:23: current_stack_pointer.h:22:2: error: #error "implement current_stack_pointer equivalent" 22 | #error "implement current_stack_pointer equivalent" | ^~~~~ sas.c: In function ‘my_usr1’: sas.c:50:13: error: ‘sp’ undeclared (first use in this function); did you mean ‘p’? 50 | if (sp < (unsigned long)sstack || | ^~ This happens because GCC doesn't define __ppc__ for 64-bit builds, only 32-bit builds. Instead use __powerpc__ to detect powerpc builds, which is defined by clang and GCC for 64-bit and 32-bit builds. Fixes: 05107edc9101 ("selftests: sigaltstack: fix -Wuninitialized") Cc: stable@vger.kernel.org # v6.3+ Signed-off-by: Michael Ellerman Link: https://msgid.link/20240520062647.688667-1-mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman commit 7f25f296fc9bd0435be14e89bf657cd615a23574 Author: Bart Van Assche Date: Wed Jun 5 08:51:01 2024 -0600 RDMA/iwcm: Fix a use-after-free related to destroying CM IDs commit aee2424246f9f1dadc33faa78990c1e2eb7826e4 upstream. iw_conn_req_handler() associates a new struct rdma_id_private (conn_id) with an existing struct iw_cm_id (cm_id) as follows: conn_id->cm_id.iw = cm_id; cm_id->context = conn_id; cm_id->cm_handler = cma_iw_handler; rdma_destroy_id() frees both the cm_id and the struct rdma_id_private. Make sure that cm_work_handler() does not trigger a use-after-free by only freeing of the struct rdma_id_private after all pending work has finished. Cc: stable@vger.kernel.org Fixes: 59c68ac31e15 ("iw_cm: free cm_id resources on the last deref") Reviewed-by: Zhu Yanjun Tested-by: Shin'ichiro Kawasaki Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20240605145117.397751-6-bvanassche@acm.org Signed-off-by: Leon Romanovsky Signed-off-by: Greg Kroah-Hartman commit 8e9e1b4b9d574e52bda65760d7ac49dac47d4710 Author: Jiaxun Yang Date: Fri Jun 14 16:40:15 2024 +0100 platform: mips: cpu_hwmon: Disable driver on unsupported hardware commit f4d430db17b4ef4e9c3c352a04b2fe3c93011978 upstream. cpu_hwmon is unsupported on CPUs without loongson_chiptemp register and csr. Cc: stable@vger.kernel.org Signed-off-by: Jiaxun Yang Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman commit 6e70fff02f5de9521f49360d776e09d7dcfdbc86 Author: Thomas Gleixner Date: Thu Jul 11 22:25:21 2024 +0200 watchdog/perf: properly initialize the turbo mode timestamp and rearm counter commit f944ffcbc2e1c759764850261670586ddf3bdabb upstream. For systems on which the performance counter can expire early due to turbo modes the watchdog handler has a safety net in place which validates that since the last watchdog event there has at least 4/5th of the watchdog period elapsed. This works reliably only after the first watchdog event because the per CPU variable which holds the timestamp of the last event is never initialized. So a first spurious event will validate against a timestamp of 0 which results in a delta which is likely to be way over the 4/5 threshold of the period. As this might happen before the first watchdog hrtimer event increments the watchdog counter, this can lead to false positives. Fix this by initializing the timestamp before enabling the hardware event. Reset the rearm counter as well, as that might be non zero after the watchdog was disabled and reenabled. Link: https://lkml.kernel.org/r/87frsfu15a.ffs@tglx Fixes: 7edaeb6841df ("kernel/watchdog: Prevent false positives with turbo modes") Signed-off-by: Thomas Gleixner Cc: Arjan van de Ven Cc: Peter Zijlstra Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 89b7c3d509be492f2ad257b9d01ea45bae32190b Author: Joy Chakraborty Date: Wed Jun 12 08:08:31 2024 +0000 rtc: isl1208: Fix return value of nvmem callbacks commit 70f1ae5f0e7f44edf842444044615da7b59838c1 upstream. Read/write callbacks registered with nvmem core expect 0 to be returned on success and a negative value to be returned on failure. isl1208_nvmem_read()/isl1208_nvmem_write() currently return the number of bytes read/written on success, fix to return 0 on success and negative on failure. Fixes: c3544f6f51ed ("rtc: isl1208: Add new style nvmem support to driver") Cc: stable@vger.kernel.org Signed-off-by: Joy Chakraborty Link: https://lore.kernel.org/r/20240612080831.1227131-1-joychakr@google.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman commit f6fe92535e86d0751db4029130fd54ac250ebb65 Author: Adrian Hunter Date: Mon Jun 24 23:10:56 2024 +0300 perf/x86/intel/pt: Fix a topa_entry base address calculation commit ad97196379d0b8cb24ef3d5006978a6554e6467f upstream. topa_entry->base is a bit-field. Bit-fields are not promoted to a 64-bit type, even if the underlying type is 64-bit, and so, if necessary, must be cast to a larger type when calculations are done. Fix a topa_entry->base address calculation by adding a cast. Without the cast, the address was limited to 36-bits i.e. 64GiB. The address calculation is used on systems that do not support Multiple Entry ToPA (only Broadwell), and affects physical addresses on or above 64GiB. Instead of writing to the correct address, the address comprising the first 36 bits would be written to. Intel PT snapshot and sampling modes are not affected. Fixes: 52ca9ced3f70 ("perf/x86/intel/pt: Add Intel PT PMU driver") Reported-by: Dave Hansen Signed-off-by: Adrian Hunter Signed-off-by: Peter Zijlstra (Intel) Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240624201101.60186-3-adrian.hunter@intel.com Signed-off-by: Greg Kroah-Hartman commit 8922d66df14f7bed952cb180638949a292e6c2fe Author: Marco Cavenati Date: Mon Jun 24 23:10:55 2024 +0300 perf/x86/intel/pt: Fix topa_entry base length commit 5638bd722a44bbe97c1a7b3fae5b9efddb3e70ff upstream. topa_entry->base needs to store a pfn. It obviously needs to be large enough to store the largest possible x86 pfn which is MAXPHYADDR-PAGE_SIZE (52-12). So it is 4 bits too small. Increase the size of topa_entry->base from 36 bits to 40 bits. Note, systems where physical addresses can be 256TiB or more are affected. [ Adrian: Amend commit message as suggested by Dave Hansen ] Fixes: 52ca9ced3f70 ("perf/x86/intel/pt: Add Intel PT PMU driver") Signed-off-by: Marco Cavenati Signed-off-by: Adrian Hunter Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240624201101.60186-2-adrian.hunter@intel.com Signed-off-by: Greg Kroah-Hartman commit e1f010844443c389bc552884ac5cfa47de34d54c Author: Nilesh Javali Date: Wed Jul 10 22:40:48 2024 +0530 scsi: qla2xxx: validate nvme_local_port correctly commit eb1d4ce2609584eeb7694866f34d4b213caa3af9 upstream. The driver load failed with error message, qla2xxx [0000:04:00.0]-ffff:0: register_localport failed: ret=ffffffef and with a kernel crash, BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 Workqueue: events_unbound qla_register_fcport_fn [qla2xxx] RIP: 0010:nvme_fc_register_remoteport+0x16/0x430 [nvme_fc] RSP: 0018:ffffaaa040eb3d98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9dfb46b78c00 RCX: 0000000000000000 RDX: ffff9dfb46b78da8 RSI: ffffaaa040eb3e08 RDI: 0000000000000000 RBP: ffff9dfb612a0a58 R08: ffffffffaf1d6270 R09: 3a34303a30303030 R10: 34303a303030305b R11: 2078787832616c71 R12: ffff9dfb46b78dd4 R13: ffff9dfb46b78c24 R14: ffff9dfb41525300 R15: ffff9dfb46b78da8 FS: 0000000000000000(0000) GS:ffff9dfc67c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000070 CR3: 000000018da10004 CR4: 00000000000206f0 Call Trace: qla_nvme_register_remote+0xeb/0x1f0 [qla2xxx] ? qla2x00_dfs_create_rport+0x231/0x270 [qla2xxx] qla2x00_update_fcport+0x2a1/0x3c0 [qla2xxx] qla_register_fcport_fn+0x54/0xc0 [qla2xxx] Exit the qla_nvme_register_remote() function when qla_nvme_register_hba() fails and correctly validate nvme_local_port. Cc: stable@vger.kernel.org Signed-off-by: Nilesh Javali Link: https://lore.kernel.org/r/20240710171057.35066-3-njavali@marvell.com Reviewed-by: Himanshu Madhani Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit af46649304b0c9cede4ccfc2be2561ce8ed6a2ea Author: Shreyas Deodhar Date: Wed Jul 10 22:40:52 2024 +0530 scsi: qla2xxx: Complete command early within lock commit 4475afa2646d3fec176fc4d011d3879b26cb26e3 upstream. A crash was observed while performing NPIV and FW reset, BUG: kernel NULL pointer dereference, address: 000000000000001c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 1 PREEMPT_RT SMP NOPTI RIP: 0010:dma_direct_unmap_sg+0x51/0x1e0 RSP: 0018:ffffc90026f47b88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000021 RCX: 0000000000000002 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff8881041130d0 RBP: ffff8881041130d0 R08: 0000000000000000 R09: 0000000000000034 R10: ffffc90026f47c48 R11: 0000000000000031 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8881565e4a20 R15: 0000000000000000 FS: 00007f4c69ed3d00(0000) GS:ffff889faac80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000001c CR3: 0000000288a50002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? __die_body+0x1a/0x60 ? page_fault_oops+0x16f/0x4a0 ? do_user_addr_fault+0x174/0x7f0 ? exc_page_fault+0x69/0x1a0 ? asm_exc_page_fault+0x22/0x30 ? dma_direct_unmap_sg+0x51/0x1e0 ? preempt_count_sub+0x96/0xe0 qla2xxx_qpair_sp_free_dma+0x29f/0x3b0 [qla2xxx] qla2xxx_qpair_sp_compl+0x60/0x80 [qla2xxx] __qla2x00_abort_all_cmds+0xa2/0x450 [qla2xxx] The command completion was done early while aborting the commands in driver unload path but outside lock to avoid the WARN_ON condition of performing dma_free_attr within the lock. However this caused race condition while command completion via multiple paths causing system crash. Hence complete the command early in unload path but within the lock to avoid race condition. Fixes: 0367076b0817 ("scsi: qla2xxx: Perform lockless command completion in abort path") Cc: stable@vger.kernel.org Signed-off-by: Shreyas Deodhar Signed-off-by: Nilesh Javali Link: https://lore.kernel.org/r/20240710171057.35066-7-njavali@marvell.com Reviewed-by: Himanshu Madhani Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit dae67169cb35a37ecccf60cfcd6bf93a1f4f5efb Author: Shreyas Deodhar Date: Wed Jul 10 22:40:49 2024 +0530 scsi: qla2xxx: Fix for possible memory corruption commit c03d740152f78e86945a75b2ad541bf972fab92a upstream. Init Control Block is dereferenced incorrectly. Correctly dereference ICB Cc: stable@vger.kernel.org Signed-off-by: Shreyas Deodhar Signed-off-by: Nilesh Javali Link: https://lore.kernel.org/r/20240710171057.35066-4-njavali@marvell.com Reviewed-by: Himanshu Madhani Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit 171ac4b495f9473bc134356a00095b47e6409e52 Author: Manish Rangankar Date: Wed Jul 10 22:40:53 2024 +0530 scsi: qla2xxx: During vport delete send async logout explicitly commit 76f480d7c717368f29a3870f7d64471ce0ff8fb2 upstream. During vport delete, it is observed that during unload we hit a crash because of stale entries in outstanding command array. For all these stale I/O entries, eh_abort was issued and aborted (fast_fail_io = 2009h) but I/Os could not complete while vport delete is in process of deleting. BUG: kernel NULL pointer dereference, address: 000000000000001c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI Workqueue: qla2xxx_wq qla_do_work [qla2xxx] RIP: 0010:dma_direct_unmap_sg+0x51/0x1e0 RSP: 0018:ffffa1e1e150fc68 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000021 RCX: 0000000000000001 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff8ce208a7a0d0 RBP: ffff8ce208a7a0d0 R08: 0000000000000000 R09: ffff8ce378aac9c8 R10: ffff8ce378aac8a0 R11: ffffa1e1e150f9d8 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8ce378aac9c8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8d217f000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000001c CR3: 0000002089acc000 CR4: 0000000000350ee0 Call Trace: qla2xxx_qpair_sp_free_dma+0x417/0x4e0 ? qla2xxx_qpair_sp_compl+0x10d/0x1a0 ? qla2x00_status_entry+0x768/0x2830 ? newidle_balance+0x2f0/0x430 ? dequeue_entity+0x100/0x3c0 ? qla24xx_process_response_queue+0x6a1/0x19e0 ? __schedule+0x2d5/0x1140 ? qla_do_work+0x47/0x60 ? process_one_work+0x267/0x440 ? process_one_work+0x440/0x440 ? worker_thread+0x2d/0x3d0 ? process_one_work+0x440/0x440 ? kthread+0x156/0x180 ? set_kthread_struct+0x50/0x50 ? ret_from_fork+0x22/0x30 Send out async logout explicitly for all the ports during vport delete. Cc: stable@vger.kernel.org Signed-off-by: Manish Rangankar Signed-off-by: Nilesh Javali Link: https://lore.kernel.org/r/20240710171057.35066-8-njavali@marvell.com Reviewed-by: Himanshu Madhani Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit 67b6d03dca71b7fc612e57976a05759532e82ae7 Author: Joy Chakraborty Date: Wed Jun 12 08:36:35 2024 +0000 rtc: cmos: Fix return value of nvmem callbacks commit 1c184baccf0d5e2ef4cc1562261d0e48508a1c2b upstream. Read/write callbacks registered with nvmem core expect 0 to be returned on success and a negative value to be returned on failure. cmos_nvram_read()/cmos_nvram_write() currently return the number of bytes read or written, fix to return 0 on success and -EIO incase number of bytes requested was not read or written. Fixes: 8b5b7958fd1c ("rtc: cmos: use generic nvmem") Cc: stable@vger.kernel.org Signed-off-by: Joy Chakraborty Reviewed-by: Dan Carpenter Link: https://lore.kernel.org/r/20240612083635.1253039-1-joychakr@google.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman commit b59a5e86a3934f1b6a5bd1368902dbc79bdecc90 Author: Zijun Hu Date: Thu May 30 21:14:37 2024 +0800 kobject_uevent: Fix OOB access within zap_modalias_env() commit dd6e9894b451e7c85cceb8e9dc5432679a70e7dc upstream. zap_modalias_env() wrongly calculates size of memory block to move, so will cause OOB memory access issue if variable MODALIAS is not the last one within its @env parameter, fixed by correcting size to memmove. Fixes: 9b3fa47d4a76 ("kobject: fix suppressing modalias in uevents delivered over netlink") Cc: stable@vger.kernel.org Signed-off-by: Zijun Hu Reviewed-by: Lk Sii Link: https://lore.kernel.org/r/1717074877-11352-1-git-send-email-quic_zijuhu@quicinc.com Signed-off-by: Greg Kroah-Hartman commit 362ded08cc0296859a479265f232915b9115d5c2 Author: Ross Lagerwall Date: Wed Jul 17 17:20:16 2024 +0100 decompress_bunzip2: fix rare decompression failure commit bf6acd5d16057d7accbbb1bf7dc6d8c56eeb4ecc upstream. The decompression code parses a huffman tree and counts the number of symbols for a given bit length. In rare cases, there may be >= 256 symbols with a given bit length, causing the unsigned char to overflow. This causes a decompression failure later when the code tries and fails to find the bit length for a given symbol. Since the maximum number of symbols is 258, use unsigned short instead. Link: https://lkml.kernel.org/r/20240717162016.1514077-1-ross.lagerwall@citrix.com Fixes: bc22c17e12c1 ("bzip2/lzma: library support for gzip, bzip2 and lzma decompression") Signed-off-by: Ross Lagerwall Cc: Alain Knaff Cc: "H. Peter Anvin" Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 8d4fc803ff43defcb48a359f8cc6f93a82da8dc9 Author: Fedor Pchelkin Date: Thu Feb 29 23:42:36 2024 +0300 ubi: eba: properly rollback inside self_check_eba commit 745d9f4a31defec731119ee8aad8ba9f2536dd9a upstream. In case of a memory allocation failure in the volumes loop we can only process the already allocated scan_eba and fm_eba array elements on the error path - others are still uninitialized. Found by Linux Verification Center (linuxtesting.org). Fixes: 00abf3041590 ("UBI: Add self_check_eba()") Cc: stable@vger.kernel.org Signed-off-by: Fedor Pchelkin Reviewed-by: Zhihao Cheng Signed-off-by: Richard Weinberger Signed-off-by: Greg Kroah-Hartman commit 02a29f6e3be92d5923c0d49b11e76bd76dde4b47 Author: Bastien Curutchet Date: Thu Jul 18 13:55:34 2024 +0200 clk: davinci: da8xx-cfgchip: Initialize clk_init_data before use commit a83b22754e351f13fb46596c85f667dc33da71ec upstream. The flag attribute of the struct clk_init_data isn't initialized before the devm_clk_hw_register() call. This can lead to unexpected behavior during registration. Initialize the entire clk_init_data to zero at declaration. Cc: stable@vger.kernel.org Fixes: 58e1e2d2cd89 ("clk: davinci: cfgchip: Add TI DA8XX USB PHY clocks") Signed-off-by: Bastien Curutchet Reviewed-by: David Lechner Link: https://lore.kernel.org/r/20240718115534.41513-1-bastien.curutchet@bootlin.com Signed-off-by: Stephen Boyd Signed-off-by: Greg Kroah-Hartman commit 54162974aea37a8cae00742470a78c7f6bd6f915 Author: Chao Yu Date: Tue Jun 4 15:56:36 2024 +0800 f2fs: fix to don't dirty inode for readonly filesystem commit 192b8fb8d1c8ca3c87366ebbef599fa80bb626b8 upstream. syzbot reports f2fs bug as below: kernel BUG at fs/f2fs/inode.c:933! RIP: 0010:f2fs_evict_inode+0x1576/0x1590 fs/f2fs/inode.c:933 Call Trace: evict+0x2a4/0x620 fs/inode.c:664 dispose_list fs/inode.c:697 [inline] evict_inodes+0x5f8/0x690 fs/inode.c:747 generic_shutdown_super+0x9d/0x2c0 fs/super.c:675 kill_block_super+0x44/0x90 fs/super.c:1667 kill_f2fs_super+0x303/0x3b0 fs/f2fs/super.c:4894 deactivate_locked_super+0xc1/0x130 fs/super.c:484 cleanup_mnt+0x426/0x4c0 fs/namespace.c:1256 task_work_run+0x24a/0x300 kernel/task_work.c:180 ptrace_notify+0x2cd/0x380 kernel/signal.c:2399 ptrace_report_syscall include/linux/ptrace.h:411 [inline] ptrace_report_syscall_exit include/linux/ptrace.h:473 [inline] syscall_exit_work kernel/entry/common.c:251 [inline] syscall_exit_to_user_mode_prepare kernel/entry/common.c:278 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:283 [inline] syscall_exit_to_user_mode+0x15c/0x280 kernel/entry/common.c:296 do_syscall_64+0x50/0x110 arch/x86/entry/common.c:88 entry_SYSCALL_64_after_hwframe+0x63/0x6b The root cause is: - do_sys_open - f2fs_lookup - __f2fs_find_entry - f2fs_i_depth_write - f2fs_mark_inode_dirty_sync - f2fs_dirty_inode - set_inode_flag(inode, FI_DIRTY_INODE) - umount - kill_f2fs_super - kill_block_super - generic_shutdown_super - sync_filesystem : sb is readonly, skip sync_filesystem() - evict_inodes - iput - f2fs_evict_inode - f2fs_bug_on(sbi, is_inode_flag_set(inode, FI_DIRTY_INODE)) : trigger kernel panic When we try to repair i_current_depth in readonly filesystem, let's skip dirty inode to avoid panic in later f2fs_evict_inode(). Cc: stable@vger.kernel.org Reported-by: syzbot+31e4659a3fe953aec2f4@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/000000000000e890bc0609a55cff@google.com Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman commit 5e5801888d6ee3cfad07626355c337aa6d403cab Author: Saurav Kashyap Date: Wed Jul 10 22:40:50 2024 +0530 scsi: qla2xxx: Return ENOBUFS if sg_cnt is more than one for ELS cmds commit ce2065c4cc4f05635413f63f6dc038d7d4842e31 upstream. Firmware only supports single DSDs in ELS Pass-through IOCB (0x53h), sg cnt is decided by the SCSI ML. User is not aware of the cause of an acutal error. Return the appropriate return code that will be decoded by API and application and proper error message will be displayed to user. Fixes: 6e98016ca077 ("[SCSI] qla2xxx: Re-organized BSG interface specific code.") Cc: stable@vger.kernel.org Signed-off-by: Saurav Kashyap Signed-off-by: Nilesh Javali Link: https://lore.kernel.org/r/20240710171057.35066-5-njavali@marvell.com Reviewed-by: Himanshu Madhani Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit 46f1dea17b0e07780fab9ee935dc769534aa112d Author: Carlos Llamas Date: Thu Jul 11 20:14:51 2024 +0000 binder: fix hang of unregistered readers commit 31643d84b8c3d9c846aa0e20bc033e46c68c7e7d upstream. With the introduction of binder_available_for_proc_work_ilocked() in commit 1b77e9dcc3da ("ANDROID: binder: remove proc waitqueue") a binder thread can only "wait_for_proc_work" after its thread->looper has been marked as BINDER_LOOPER_STATE_{ENTERED|REGISTERED}. This means an unregistered reader risks waiting indefinitely for work since it never gets added to the proc->waiting_threads. If there are no further references to its waitqueue either the task will hang. The same applies to readers using the (e)poll interface. I couldn't find the rationale behind this restriction. So this patch restores the previous behavior of allowing unregistered threads to "wait_for_proc_work". Note that an error message for this scenario, which had previously become unreachable, is now re-enabled. Fixes: 1b77e9dcc3da ("ANDROID: binder: remove proc waitqueue") Cc: stable@vger.kernel.org Cc: Martijn Coenen Cc: Arve Hjønnevåg Signed-off-by: Carlos Llamas Link: https://lore.kernel.org/r/20240711201452.2017543-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman commit 48b5730852d7de5b012e94a3077c2452233dcee0 Author: Wei Liu Date: Mon Jul 1 20:26:05 2024 +0000 PCI: hv: Return zero, not garbage, when reading PCI_INTERRUPT_PIN commit fea93a3e5d5e6a09eb153866d2ce60ea3287a70d upstream. The intent of the code snippet is to always return 0 for both PCI_INTERRUPT_LINE and PCI_INTERRUPT_PIN. The check misses PCI_INTERRUPT_PIN. This patch fixes that. This is discovered by this call in VFIO: pci_read_config_byte(vdev->pdev, PCI_INTERRUPT_PIN, &pin); The old code does not set *val to 0 because it misses the check for PCI_INTERRUPT_PIN. Garbage is returned in that case. Fixes: 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs") Link: https://lore.kernel.org/linux-pci/20240701202606.129606-1-wei.liu@kernel.org Signed-off-by: Wei Liu Signed-off-by: Krzysztof Wilczyński Reviewed-by: Michael Kelley Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman commit 2828b6fd837068158d3a2c21e93d7e049e099bf7 Author: Ilpo Järvinen Date: Mon May 27 16:26:15 2024 +0300 hwrng: amd - Convert PCIBIOS_* return codes to errnos commit 14cba6ace79627a57fb9058582b03f0ed3832390 upstream. amd_rng_mod_init() uses pci_read_config_dword() that returns PCIBIOS_* codes. The return code is then returned as is but amd_rng_mod_init() is a module_init() function that should return normal errnos. Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal errno before returning it. Fixes: 96d63c0297cc ("[PATCH] Add AMD HW RNG driver") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 1ca78a7c47152f4cd51b1e1c22f57fa4320f53a2 Author: Alan Stern Date: Thu Jun 6 09:57:55 2024 -0400 tools/memory-model: Fix bug in lock.cat commit 4c830eef806679dc243e191f962c488dd9d00708 upstream. Andrea reported that the following innocuous litmus test: C T {} P0(spinlock_t *x) { int r0; spin_lock(x); spin_unlock(x); r0 = spin_is_locked(x); } gives rise to a nonsensical empty result with no executions: $ herd7 -conf linux-kernel.cfg T.litmus Test T Required States 0 Ok Witnesses Positive: 0 Negative: 0 Condition forall (true) Observation T Never 0 0 Time T 0.00 Hash=6fa204e139ddddf2cb6fa963bad117c0 The problem is caused by a bug in the lock.cat part of the LKMM. Its computation of the rf relation for RU (read-unlocked) events is faulty; it implicitly assumes that every RU event must read from either a UL (unlock) event in another thread or from the lock's initial state. Neither is true in the litmus test above, so the computation yields no possible executions. The lock.cat code tries to make up for this deficiency by allowing RU events outside of critical sections to read from the last po-previous UL event. But it does this incorrectly, trying to keep these rfi links separate from the rfe links that might also be needed, and passing only the latter to herd7's cross() macro. The problem is fixed by merging the two sets of possible rf links for RU events and using them all in the call to cross(). Signed-off-by: Alan Stern Reported-by: Andrea Parri Closes: https://lore.kernel.org/linux-arch/ZlC0IkzpQdeGj+a3@andrea/ Tested-by: Andrea Parri Acked-by: Andrea Parri Fixes: 15553dcbca06 ("tools/memory-model: Add model support for spin_is_locked()") CC: Signed-off-by: Paul E. McKenney Signed-off-by: Greg Kroah-Hartman commit 13d79c648961960d1e91af20432b074ce15a7a09 Author: Ilpo Järvinen Date: Mon May 27 16:27:00 2024 +0300 leds: ss4200: Convert PCIBIOS_* return codes to errnos commit ce068e83976140badb19c7f1307926b4b562fac4 upstream. ich7_lpc_probe() uses pci_read_config_dword() that returns PCIBIOS_* codes. The error handling code assumes incorrectly it's a normal errno and checks for < 0. The return code is returned from the probe function as is but probe functions should return normal errnos. Remove < 0 from the check and convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal errno before returning it. Fixes: a328e95b82c1 ("leds: LED driver for Intel NAS SS4200 series (v5)") Cc: Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20240527132700.14260-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman commit 34293b8c12404d690e45151af9e12a5a7aba4c1f Author: Rafael Beims Date: Fri May 10 13:04:58 2024 +0200 wifi: mwifiex: Fix interface type change commit a17b9f590f6ec2b9f1b12b1db3bf1d181de6b272 upstream. When changing the interface type we also need to update the bss_num, the driver private data is searched based on a unique (bss_type, bss_num) tuple, therefore every time bss_type changes, bss_num must also change. This fixes for example an issue in which, after the mode changed, a wireless scan on the changed interface would not finish, leading to repeated -EBUSY messages to userspace when other scan requests were sent. Fixes: c606008b7062 ("mwifiex: Properly initialize private structure on interface type changes") Cc: stable@vger.kernel.org Signed-off-by: Rafael Beims Signed-off-by: Francesco Dolcini Signed-off-by: Kalle Valo Link: https://msgid.link/20240510110458.15475-1-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman commit e02f9941e8c011aa3eafa799def6a134ce06bcfa Author: Baokun Li Date: Tue Jul 2 21:23:49 2024 +0800 ext4: make sure the first directory block is not a hole commit f9ca51596bbfd0f9c386dd1c613c394c78d9e5e6 upstream. The syzbot constructs a directory that has no dirblock but is non-inline, i.e. the first directory block is a hole. And no errors are reported when creating files in this directory in the following flow. ext4_mknod ... ext4_add_entry // Read block 0 ext4_read_dirblock(dir, block, DIRENT) bh = ext4_bread(NULL, inode, block, 0) if (!bh && (type == INDEX || type == DIRENT_HTREE)) // The first directory block is a hole // But type == DIRENT, so no error is reported. After that, we get a directory block without '.' and '..' but with a valid dentry. This may cause some code that relies on dot or dotdot (such as make_indexed_dir()) to crash. Therefore when ext4_read_dirblock() finds that the first directory block is a hole report that the filesystem is corrupted and return an error to avoid loading corrupted data from disk causing something bad. Reported-by: syzbot+ae688d469e36fb5138d0@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ae688d469e36fb5138d0 Fixes: 4e19d6b65fb4 ("ext4: allow directory holes") Cc: stable@kernel.org Signed-off-by: Baokun Li Reviewed-by: Jan Kara Link: https://patch.msgid.link/20240702132349.2600605-3-libaokun@huaweicloud.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman commit 19e13b4d7f0303186fcc891aba8d0de7c8fdbda8 Author: Baokun Li Date: Tue Jul 2 21:23:48 2024 +0800 ext4: check dot and dotdot of dx_root before making dir indexed commit 50ea741def587a64e08879ce6c6a30131f7111e7 upstream. Syzbot reports a issue as follows: ============================================ BUG: unable to handle page fault for address: ffffed11022e24fe PGD 23ffee067 P4D 23ffee067 PUD 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 PID: 5079 Comm: syz-executor306 Not tainted 6.10.0-rc5-g55027e689933 #0 Call Trace: make_indexed_dir+0xdaf/0x13c0 fs/ext4/namei.c:2341 ext4_add_entry+0x222a/0x25d0 fs/ext4/namei.c:2451 ext4_rename fs/ext4/namei.c:3936 [inline] ext4_rename2+0x26e5/0x4370 fs/ext4/namei.c:4214 [...] ============================================ The immediate cause of this problem is that there is only one valid dentry for the block to be split during do_split, so split==0 results in out of bounds accesses to the map triggering the issue. do_split unsigned split dx_make_map count = 1 split = count/2 = 0; continued = hash2 == map[split - 1].hash; ---> map[4294967295] The maximum length of a filename is 255 and the minimum block size is 1024, so it is always guaranteed that the number of entries is greater than or equal to 2 when do_split() is called. But syzbot's crafted image has no dot and dotdot in dir, and the dentry distribution in dirblock is as follows: bus dentry1 hole dentry2 free |xx--|xx-------------|...............|xx-------------|...............| 0 12 (8+248)=256 268 256 524 (8+256)=264 788 236 1024 So when renaming dentry1 increases its name_len length by 1, neither hole nor free is sufficient to hold the new dentry, and make_indexed_dir() is called. In make_indexed_dir() it is assumed that the first two entries of the dirblock must be dot and dotdot, so bus and dentry1 are left in dx_root because they are treated as dot and dotdot, and only dentry2 is moved to the new leaf block. That's why count is equal to 1. Therefore add the ext4_check_dx_root() helper function to add more sanity checks to dot and dotdot before starting the conversion to avoid the above issue. Reported-by: syzbot+ae688d469e36fb5138d0@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ae688d469e36fb5138d0 Fixes: ac27a0ec112a ("[PATCH] ext4: initial copy of files from ext3") Cc: stable@kernel.org Signed-off-by: Baokun Li Reviewed-by: Jan Kara Link: https://patch.msgid.link/20240702132349.2600605-2-libaokun@huaweicloud.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman commit ecc258fbdd9019ab6c1eb7d3acd41d9ed8c841c2 Author: Paolo Pisati Date: Sat Jun 1 17:32:54 2024 +0200 m68k: amiga: Turn off Warp1260 interrupts during boot commit 1d8491d3e726984343dd8c3cdbe2f2b47cfdd928 upstream. On an Amiga 1200 equipped with a Warp1260 accelerator, an interrupt storm coming from the accelerator board causes the machine to crash in local_irq_enable() or auto_irq_enable(). Disabling interrupts for the Warp1260 in amiga_parse_bootinfo() fixes the problem. Link: https://lore.kernel.org/r/ZkjwzVwYeQtyAPrL@amaterasu.local Cc: stable Signed-off-by: Paolo Pisati Reviewed-by: Michael Schmitz Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20240601153254.186225-1-p.pisati@gmail.com Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman commit cae9e59cc41683408b70b9ab569f8654866ba914 Author: Jan Kara Date: Mon Jun 17 17:41:52 2024 +0200 udf: Avoid using corrupted block bitmap buffer commit a90d4471146de21745980cba51ce88e7926bcc4f upstream. When the filesystem block bitmap is corrupted, we detect the corruption while loading the bitmap and fail the allocation with error. However the next allocation from the same bitmap will notice the bitmap buffer is already loaded and tries to allocate from the bitmap with mixed results (depending on the exact nature of the bitmap corruption). Fix the problem by using BH_verified bit to indicate whether the bitmap is valid or not. Reported-by: syzbot+5f682cd029581f9edfd1@syzkaller.appspotmail.com CC: stable@vger.kernel.org Link: https://patch.msgid.link/20240617154201.29512-2-jack@suse.cz Fixes: 1e0d4adf17e7 ("udf: Check consistency of Space Bitmap Descriptor") Signed-off-by: Jan Kara Signed-off-by: Greg Kroah-Hartman commit 71dbf95359347c2ecc5a6dfc02783fcfccb2e9fb Author: Sung Joon Kim Date: Mon Jul 8 19:29:49 2024 -0400 drm/amd/display: Check for NULL pointer commit 4ab68e168ae1695f7c04fae98930740aaf7c50fa upstream. [why & how] Need to make sure plane_state is initialized before accessing its members. Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Xi (Alex) Liu Signed-off-by: Sung Joon Kim Signed-off-by: Aurabindo Pillai Signed-off-by: Alex Deucher (cherry picked from commit 295d91cbc700651782a60572f83c24861607b648) Signed-off-by: Greg Kroah-Hartman commit d6ad202f73f8edba0cbc0065aa57a79ffe8fdcdc Author: Ma Ke Date: Tue Jul 9 17:20:11 2024 +0800 drm/gma500: fix null pointer dereference in psb_intel_lvds_get_modes commit 2df7aac81070987b0f052985856aa325a38debf6 upstream. In psb_intel_lvds_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. Cc: stable@vger.kernel.org Fixes: 89c78134cc54 ("gma500: Add Poulsbo support") Signed-off-by: Ma Ke Signed-off-by: Patrik Jakobsson Link: https://patchwork.freedesktop.org/patch/msgid/20240709092011.3204970-1-make24@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman commit a658ae2173ab74667c009e2550455e6de5b33ddc Author: Ma Ke Date: Tue Jul 9 19:33:11 2024 +0800 drm/gma500: fix null pointer dereference in cdv_intel_lvds_get_modes commit cb520c3f366c77e8d69e4e2e2781a8ce48d98e79 upstream. In cdv_intel_lvds_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. Cc: stable@vger.kernel.org Fixes: 6a227d5fd6c4 ("gma500: Add support for Cedarview") Signed-off-by: Ma Ke Signed-off-by: Patrik Jakobsson Link: https://patchwork.freedesktop.org/patch/msgid/20240709113311.37168-1-make24@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman commit 4a52861cd76e79f1a593beb23d096523eb9732c2 Author: Chao Yu Date: Sun Jun 16 09:38:41 2024 +0800 hfs: fix to initialize fields of hfs_inode_info after hfs_alloc_inode() commit 26a2ed107929a855155429b11e1293b83e6b2a8b upstream. Syzbot reports uninitialized value access issue as below: loop0: detected capacity change from 0 to 64 ===================================================== BUG: KMSAN: uninit-value in hfs_revalidate_dentry+0x307/0x3f0 fs/hfs/sysdep.c:30 hfs_revalidate_dentry+0x307/0x3f0 fs/hfs/sysdep.c:30 d_revalidate fs/namei.c:862 [inline] lookup_fast+0x89e/0x8e0 fs/namei.c:1649 walk_component fs/namei.c:2001 [inline] link_path_walk+0x817/0x1480 fs/namei.c:2332 path_lookupat+0xd9/0x6f0 fs/namei.c:2485 filename_lookup+0x22e/0x740 fs/namei.c:2515 user_path_at_empty+0x8b/0x390 fs/namei.c:2924 user_path_at include/linux/namei.h:57 [inline] do_mount fs/namespace.c:3689 [inline] __do_sys_mount fs/namespace.c:3898 [inline] __se_sys_mount+0x66b/0x810 fs/namespace.c:3875 __x64_sys_mount+0xe4/0x140 fs/namespace.c:3875 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b BUG: KMSAN: uninit-value in hfs_ext_read_extent fs/hfs/extent.c:196 [inline] BUG: KMSAN: uninit-value in hfs_get_block+0x92d/0x1620 fs/hfs/extent.c:366 hfs_ext_read_extent fs/hfs/extent.c:196 [inline] hfs_get_block+0x92d/0x1620 fs/hfs/extent.c:366 block_read_full_folio+0x4ff/0x11b0 fs/buffer.c:2271 hfs_read_folio+0x55/0x60 fs/hfs/inode.c:39 filemap_read_folio+0x148/0x4f0 mm/filemap.c:2426 do_read_cache_folio+0x7c8/0xd90 mm/filemap.c:3553 do_read_cache_page mm/filemap.c:3595 [inline] read_cache_page+0xfb/0x2f0 mm/filemap.c:3604 read_mapping_page include/linux/pagemap.h:755 [inline] hfs_btree_open+0x928/0x1ae0 fs/hfs/btree.c:78 hfs_mdb_get+0x260c/0x3000 fs/hfs/mdb.c:204 hfs_fill_super+0x1fb1/0x2790 fs/hfs/super.c:406 mount_bdev+0x628/0x920 fs/super.c:1359 hfs_mount+0xcd/0xe0 fs/hfs/super.c:456 legacy_get_tree+0x167/0x2e0 fs/fs_context.c:610 vfs_get_tree+0xdc/0x5d0 fs/super.c:1489 do_new_mount+0x7a9/0x16f0 fs/namespace.c:3145 path_mount+0xf98/0x26a0 fs/namespace.c:3475 do_mount fs/namespace.c:3488 [inline] __do_sys_mount fs/namespace.c:3697 [inline] __se_sys_mount+0x919/0x9e0 fs/namespace.c:3674 __ia32_sys_mount+0x15b/0x1b0 fs/namespace.c:3674 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 Uninit was created at: __alloc_pages+0x9a6/0xe00 mm/page_alloc.c:4590 __alloc_pages_node include/linux/gfp.h:238 [inline] alloc_pages_node include/linux/gfp.h:261 [inline] alloc_slab_page mm/slub.c:2190 [inline] allocate_slab mm/slub.c:2354 [inline] new_slab+0x2d7/0x1400 mm/slub.c:2407 ___slab_alloc+0x16b5/0x3970 mm/slub.c:3540 __slab_alloc mm/slub.c:3625 [inline] __slab_alloc_node mm/slub.c:3678 [inline] slab_alloc_node mm/slub.c:3850 [inline] kmem_cache_alloc_lru+0x64d/0xb30 mm/slub.c:3879 alloc_inode_sb include/linux/fs.h:3018 [inline] hfs_alloc_inode+0x5a/0xc0 fs/hfs/super.c:165 alloc_inode+0x83/0x440 fs/inode.c:260 new_inode_pseudo fs/inode.c:1005 [inline] new_inode+0x38/0x4f0 fs/inode.c:1031 hfs_new_inode+0x61/0x1010 fs/hfs/inode.c:186 hfs_mkdir+0x54/0x250 fs/hfs/dir.c:228 vfs_mkdir+0x49a/0x700 fs/namei.c:4126 do_mkdirat+0x529/0x810 fs/namei.c:4149 __do_sys_mkdirat fs/namei.c:4164 [inline] __se_sys_mkdirat fs/namei.c:4162 [inline] __x64_sys_mkdirat+0xc8/0x120 fs/namei.c:4162 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b It missed to initialize .tz_secondswest, .cached_start and .cached_blocks fields in struct hfs_inode_info after hfs_alloc_inode(), fix it. Cc: stable@vger.kernel.org Reported-by: syzbot+3ae6be33a50b5aae4dab@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-fsdevel/0000000000005ad04005ee48897f@google.com Signed-off-by: Chao Yu Link: https://lore.kernel.org/r/20240616013841.2217-1-chao@kernel.org Signed-off-by: Christian Brauner Signed-off-by: Greg Kroah-Hartman commit 72aff311194c8ceda934f24fd6f250b8827d7567 Author: Dikshita Agarwal Date: Thu May 9 10:44:29 2024 +0530 media: venus: fix use after free in vdec_close commit a0157b5aa34eb43ec4c5510f9c260bbb03be937e upstream. There appears to be a possible use after free with vdec_close(). The firmware will add buffer release work to the work queue through HFI callbacks as a normal part of decoding. Randomly closing the decoder device from userspace during normal decoding can incur a read after free for inst. Fix it by cancelling the work in vdec_close. Cc: stable@vger.kernel.org Fixes: af2c3834c8ca ("[media] media: venus: adding core part and helper functions") Signed-off-by: Dikshita Agarwal Acked-by: Vikash Garodia Signed-off-by: Stanimir Varbanov Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman commit 375ff2a273bffe6f3085dc3e06ef33c1716cb70b Author: Joe Hattori Date: Thu Jun 27 15:31:09 2024 +0900 char: tpm: Fix possible memory leak in tpm_bios_measurements_open() commit 5d8e2971e817bb64225fc0b6327a78752f58a9aa upstream. In tpm_bios_measurements_open(), get_device() is called on the device embedded in struct tpm_chip. In the error path, however, put_device() is not called. This results in a reference count leak, which prevents the device from being properly released. This commit makes sure to call put_device() when the seq_open() call fails. Cc: stable@vger.kernel.org # +v4.18 Fixes: 9b01b5356629 ("tpm: Move shared eventlog functions to common.c") Signed-off-by: Joe Hattori Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman commit 2194b6a9bb2ae2f4f789dde5e08bec5ddfb95d27 Author: Nicolas Dichtel Date: Wed Jul 10 10:14:29 2024 +0200 ipv6: take care of scope when choosing the src addr commit abb9a68d2c64dd9b128ae1f2e635e4d805e7ce64 upstream. When the source address is selected, the scope must be checked. For example, if a loopback address is assigned to the vrf device, it must not be chosen for packets sent outside. CC: stable@vger.kernel.org Fixes: afbac6010aec ("net: ipv6: Address selection needs to consider L3 domains") Signed-off-by: Nicolas Dichtel Reviewed-by: David Ahern Link: https://patch.msgid.link/20240710081521.3809742-4-nicolas.dichtel@6wind.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit c77064e76c768fb101ea5ff92dc771142fc9d8fd Author: Chengen Du Date: Sat Jul 13 19:47:35 2024 +0800 af_packet: Handle outgoing VLAN packets without hardware offloading commit 79eecf631c14e7f4057186570ac20e2cfac3802e upstream. The issue initially stems from libpcap. The ethertype will be overwritten as the VLAN TPID if the network interface lacks hardware VLAN offloading. In the outbound packet path, if hardware VLAN offloading is unavailable, the VLAN tag is inserted into the payload but then cleared from the sk_buff struct. Consequently, this can lead to a false negative when checking for the presence of a VLAN tag, causing the packet sniffing outcome to lack VLAN tag information (i.e., TCI-TPID). As a result, the packet capturing tool may be unable to parse packets as expected. The TCI-TPID is missing because the prb_fill_vlan_info() function does not modify the tp_vlan_tci/tp_vlan_tpid values, as the information is in the payload and not in the sk_buff struct. The skb_vlan_tag_present() function only checks vlan_all in the sk_buff struct. In cooked mode, the L2 header is stripped, preventing the packet capturing tool from determining the correct TCI-TPID value. Additionally, the protocol in SLL is incorrect, which means the packet capturing tool cannot parse the L3 header correctly. Link: https://github.com/the-tcpdump-group/libpcap/issues/1105 Link: https://lore.kernel.org/netdev/20240520070348.26725-1-chengen.du@canonical.com/T/#u Fixes: 393e52e33c6c ("packet: deliver VLAN TCI to userspace") Cc: stable@vger.kernel.org Signed-off-by: Chengen Du Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20240713114735.62360-1-chengen.du@canonical.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 5d7cea681dcaa341a18e7a0d59de764dd403a85e Author: Breno Leitao Date: Fri Jul 12 07:34:15 2024 -0700 net: netconsole: Disable target before netpoll cleanup commit 97d9fba9a812cada5484667a46e14a4c976ca330 upstream. Currently, netconsole cleans up the netpoll structure before disabling the target. This approach can lead to race conditions, as message senders (write_ext_msg() and write_msg()) check if the target is enabled before using netpoll. The sender can validate that the target is enabled, but, the netpoll might be de-allocated already, causing undesired behaviours. This patch reverses the order of operations: 1. Disable the target 2. Clean up the netpoll structure This change eliminates the potential race condition, ensuring that no messages are sent through a partially cleaned-up netpoll structure. Fixes: 2382b15bcc39 ("netconsole: take care of NETDEV_UNREGISTER event") Cc: stable@vger.kernel.org Signed-off-by: Breno Leitao Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20240712143415.1141039-1-leitao@debian.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 457a1c87d454455d671a3045cf0b56157be110a1 Author: Yu Liao Date: Thu Jul 11 20:48:43 2024 +0800 tick/broadcast: Make takeover of broadcast hrtimer reliable commit f7d43dd206e7e18c182f200e67a8db8c209907fa upstream. Running the LTP hotplug stress test on a aarch64 machine results in rcu_sched stall warnings when the broadcast hrtimer was owned by the un-plugged CPU. The issue is the following: CPU1 (owns the broadcast hrtimer) CPU2 tick_broadcast_enter() // shutdown local timer device broadcast_shutdown_local() ... tick_broadcast_exit() clockevents_switch_state(dev, CLOCK_EVT_STATE_ONESHOT) // timer device is not programmed cpumask_set_cpu(cpu, tick_broadcast_force_mask) initiates offlining of CPU1 take_cpu_down() /* * CPU1 shuts down and does not * send broadcast IPI anymore */ takedown_cpu() hotplug_cpu__broadcast_tick_pull() // move broadcast hrtimer to this CPU clockevents_program_event() bc_set_next() hrtimer_start() /* * timer device is not programmed * because only the first expiring * timer will trigger clockevent * device reprogramming */ What happens is that CPU2 exits broadcast mode with force bit set, then the local timer device is not reprogrammed and CPU2 expects to receive the expired event by the broadcast IPI. But this does not happen because CPU1 is offlined by CPU2. CPU switches the clockevent device to ONESHOT state, but does not reprogram the device. The subsequent reprogramming of the hrtimer broadcast device does not program the clockevent device of CPU2 either because the pending expiry time is already in the past and the CPU expects the event to be delivered. As a consequence all CPUs which wait for a broadcast event to be delivered are stuck forever. Fix this issue by reprogramming the local timer device if the broadcast force bit of the CPU is set so that the broadcast hrtimer is delivered. [ tglx: Massage comment and change log. Add Fixes tag ] Fixes: 989dcb645ca7 ("tick: Handle broadcast wakeup of multiple cpus") Signed-off-by: Yu Liao Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240711124843.64167-1-liaoyu15@huawei.com Signed-off-by: Greg Kroah-Hartman commit 84033790be84cdab758c638fdbb6313137fc98e5 Author: Csókás, Bence Date: Wed Jun 19 16:04:52 2024 +0200 rtc: interface: Add RTC offset to alarm after fix-up [ Upstream commit 463927a8902a9f22c3633960119410f57d4c8920 ] `rtc_add_offset()` is called by `__rtc_read_time()` and `__rtc_read_alarm()` to add the RTC's offset to the raw read-outs from the device drivers. However, in the latter case, a fix-up algorithm is run if the RTC device does not report a full `struct rtc_time` alarm value. In that case, the offset was forgot to be added. Fixes: fd6792bb022e ("rtc: fix alarm read and set offset") Signed-off-by: Csókás, Bence Link: https://lore.kernel.org/r/20240619140451.2800578-1-csokas.bence@prolan.hu Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin commit 680c7faee40b8f306894b53d395fcb7ee094a7c0 Author: Ryusuke Konishi Date: Wed Jul 3 03:35:12 2024 +0900 nilfs2: avoid undefined behavior in nilfs_cnt32_ge macro [ Upstream commit 0f3819e8c483771a59cf9d3190cd68a7a990083c ] According to the C standard 3.4.3p3, the result of signed integer overflow is undefined. The macro nilfs_cnt32_ge(), which compares two sequence numbers, uses signed integer subtraction that can overflow, and therefore the result of the calculation may differ from what is expected due to undefined behavior in different environments. Similar to an earlier change to the jiffies-related comparison macros in commit 5a581b367b5d ("jiffies: Avoid undefined behavior from signed overflow"), avoid this potential issue by changing the definition of the macro to perform the subtraction as unsigned integers, then cast the result to a signed integer for comparison. Link: https://lkml.kernel.org/r/20130727225828.GA11864@linux.vnet.ibm.com Link: https://lkml.kernel.org/r/20240702183512.6390-1-konishi.ryusuke@gmail.com Fixes: 9ff05123e3bf ("nilfs2: segment constructor") Signed-off-by: Ryusuke Konishi Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit a4b0c9fd152da19a4d3cd75f3d5b3bc8430f0615 Author: Alex Shi Date: Tue Dec 15 20:45:27 2020 -0800 fs/nilfs2: remove some unused macros to tame gcc [ Upstream commit e7920b3e9d9f5470d5ff7d883e72a47addc0a137 ] There some macros are unused and cause gcc warning. Remove them. fs/nilfs2/segment.c:137:0: warning: macro "nilfs_cnt32_gt" is not used [-Wunused-macros] fs/nilfs2/segment.c:144:0: warning: macro "nilfs_cnt32_le" is not used [-Wunused-macros] fs/nilfs2/segment.c:143:0: warning: macro "nilfs_cnt32_lt" is not used [-Wunused-macros] Link: https://lkml.kernel.org/r/1607552733-24292-1-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi Signed-off-by: Alex Shi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Stable-dep-of: 0f3819e8c483 ("nilfs2: avoid undefined behavior in nilfs_cnt32_ge macro") Signed-off-by: Sasha Levin commit 10ba89c2138b5e5efe90a8c99e0793c392e219bc Author: Peng Fan Date: Sat May 4 21:20:16 2024 +0800 pinctrl: freescale: mxs: Fix refcount of child [ Upstream commit 7f500f2011c0bbb6e1cacab74b4c99222e60248e ] of_get_next_child() will increase refcount of the returned node, need use of_node_put() on it when done. Per current implementation, 'child' will be override by for_each_child_of_node(np, child), so use of_get_child_count to avoid refcount leakage. Fixes: 17723111e64f ("pinctrl: add pinctrl-mxs support") Signed-off-by: Peng Fan Link: https://lore.kernel.org/20240504-pinctrl-cleanup-v2-18-26c5f2dc1181@nxp.com Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin commit b45432ce84fdb8e603a5df8c73316a8b611e9ba0 Author: Yang Yingliang Date: Thu Jun 6 10:37:04 2024 +0800 pinctrl: ti: ti-iodelay: fix possible memory leak when pinctrl_enable() fails [ Upstream commit 9b401f4a7170125365160c9af267a41ff6b39001 ] This driver calls pinctrl_register_and_init() which is not devm_ managed, it will leads memory leak if pinctrl_enable() fails. Replace it with devm_pinctrl_register_and_init(). And add missing of_node_put() in the error path. Fixes: 5038a66dad01 ("pinctrl: core: delete incorrect free in pinctrl_enable()") Signed-off-by: Yang Yingliang Reviewed-by: Dan Carpenter Link: https://lore.kernel.org/r/20240606023704.3931561-4-yangyingliang@huawei.com Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin commit 932813248d326b960be6e1434b5f6fea1f2bb911 Author: Uwe Kleine-König Date: Mon Oct 9 10:38:39 2023 +0200 pinctrl: ti: ti-iodelay: Drop if block with always false condition [ Upstream commit 88b3f108502bc45e6ebd005702add46759f3f45a ] ti_iodelay_remove() is only called after ti_iodelay_probe() completed successfully. In this case platform_set_drvdata() was called with a non-NULL argument and so platform_get_drvdata() won't return NULL. Simplify by removing the if block with the always false condition. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20231009083856.222030-4-u.kleine-koenig@pengutronix.de Signed-off-by: Linus Walleij Stable-dep-of: 9b401f4a7170 ("pinctrl: ti: ti-iodelay: fix possible memory leak when pinctrl_enable() fails") Signed-off-by: Sasha Levin commit 1a8e19cbc3ebfabc7aa82f6d08562dc425048492 Author: Yang Yingliang Date: Thu Jun 6 10:37:03 2024 +0800 pinctrl: single: fix possible memory leak when pinctrl_enable() fails [ Upstream commit 8f773bfbdd428819328a2d185976cfc6ae811cd3 ] This driver calls pinctrl_register_and_init() which is not devm_ managed, it will leads memory leak if pinctrl_enable() fails. Replace it with devm_pinctrl_register_and_init(). And call pcs_free_resources() if pinctrl_enable() fails. Fixes: 5038a66dad01 ("pinctrl: core: delete incorrect free in pinctrl_enable()") Signed-off-by: Yang Yingliang Reviewed-by: Dan Carpenter Link: https://lore.kernel.org/r/20240606023704.3931561-3-yangyingliang@huawei.com Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin commit 24d78662f1aa17a1a50e069c3a81d99dc1b81944 Author: Yang Yingliang Date: Thu Jun 6 10:37:02 2024 +0800 pinctrl: core: fix possible memory leak when pinctrl_enable() fails [ Upstream commit ae1cf4759972c5fe665ee4c5e0c29de66fe3cf4a ] In devm_pinctrl_register(), if pinctrl_enable() fails in pinctrl_register(), the "pctldev" has not been added to dev resources, so devm_pinctrl_dev_release() can not be called, it leads memory leak. Introduce pinctrl_uninit_controller(), call it in the error path to free memory. Fixes: 5038a66dad01 ("pinctrl: core: delete incorrect free in pinctrl_enable()") Signed-off-by: Yang Yingliang Reviewed-by: Dan Carpenter Link: https://lore.kernel.org/r/20240606023704.3931561-2-yangyingliang@huawei.com Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin commit 64c0b8e64be8368617ef08dfc59a3160563a1435 Author: Pablo Neira Ayuso Date: Sat Jul 13 16:47:38 2024 +0200 netfilter: ctnetlink: use helper function to calculate expect ID [ Upstream commit 782161895eb4ac45cf7cfa8db375bd4766cb8299 ] Delete expectation path is missing a call to the nf_expect_get_id() helper function to calculate the expectation ID, otherwise LSB of the expectation object address is leaked to userspace. Fixes: 3c79107631db ("netfilter: ctnetlink: don't use conntrack/expect object addresses as id") Reported-by: zdi-disclosures@trendmicro.com Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 55fa4883aa378031471dffea7ad5e9a0b5db81a8 Author: Jack Wang Date: Wed Jul 10 14:21:02 2024 +0200 bnxt_re: Fix imm_data endianness [ Upstream commit 95b087f87b780daafad1dbb2c84e81b729d5d33f ] When map a device between servers with MLX and BCM RoCE nics, RTRS server complain about unknown imm type, and can't map the device, After more debug, it seems bnxt_re wrongly handle the imm_data, this patch fixed the compat issue with MLX for us. In off list discussion, Selvin confirmed HW is working in little endian format and all data needs to be converted to LE while providing. This patch fix the endianness for imm_data Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by: Jack Wang Link: https://lore.kernel.org/r/20240710122102.37569-1-jinpu.wang@ionos.com Acked-by: Selvin Xavier Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin commit b8f7d8f4d52959575c08b416dff2fd1dedec0633 Author: Nick Bowler Date: Wed Jul 10 23:54:17 2024 -0400 macintosh/therm_windtunnel: fix module unload. [ Upstream commit fd748e177194ebcbbaf98df75152a30e08230cc6 ] The of_device_unregister call in therm_windtunnel's module_exit procedure does not fully reverse the effects of of_platform_device_create in the module_init prodedure. Once you unload this module, it is impossible to load it ever again since only the first of_platform_device_create call on the fan node succeeds. This driver predates first git commit, and it turns out back then of_platform_device_create worked differently than it does today. So this is actually an old regression. The appropriate function to undo of_platform_device_create now appears to be of_platform_device_destroy, and switching to use this makes it possible to unload and load the module as expected. Signed-off-by: Nick Bowler Fixes: c6e126de43e7 ("of: Keep track of populated platform devices") Signed-off-by: Michael Ellerman Link: https://msgid.link/20240711035428.16696-1-nbowler@draconx.ca Signed-off-by: Sasha Levin commit 38378074fad8a4c33318736bcb630c7ad6a0092b Author: Michael Ellerman Date: Thu May 9 22:12:47 2024 +1000 powerpc/xmon: Fix disassembly CPU feature checks [ Upstream commit 14196e47c5ffe32af7ed5a51c9e421c5ea5bccce ] In the xmon disassembly code there are several CPU feature checks to determine what dialects should be passed to the disassembler. The dialect controls which instructions the disassembler will recognise. Unfortunately the checks are incorrect, because instead of passing a single CPU feature they are passing a mask of feature bits. For example the code: if (cpu_has_feature(CPU_FTRS_POWER5)) dialect |= PPC_OPCODE_POWER5; Is trying to check if the system is running on a Power5 CPU. But CPU_FTRS_POWER5 is a mask of *all* the feature bits that are enabled on a Power5. In practice the test will always return true for any 64-bit CPU, because at least one bit in the mask will be present in the CPU_FTRS_ALWAYS mask. Similarly for all the other checks against CPU_FTRS_xx masks. Rather than trying to match the disassembly behaviour exactly to the current CPU, just differentiate between 32-bit and 64-bit, and Altivec, VSX and HTM. That will cause some instructions to be shown in disassembly even on a CPU that doesn't support them, but that's OK, objdump -d output has the same behaviour, and if anything it's less confusing than some instructions not being disassembled. Fixes: 897f112bb42e ("[POWERPC] Import updated version of ppc disassembly code for xmon") Signed-off-by: Michael Ellerman Link: https://msgid.link/20240509121248.270878-2-mpe@ellerman.id.au Signed-off-by: Sasha Levin commit 28c5198369c692fecbd9156123a7a9a2d9eb16c6 Author: Dominique Martinet Date: Fri Jul 5 16:48:30 2024 +0900 MIPS: Octeron: remove source file executable bit [ Upstream commit 89c7f5078935872cf47a713a645affb5037be694 ] This does not matter the least, but there is no other .[ch] file in the repo that is executable, so clean this up. Fixes: 29b83a64df3b ("MIPS: Octeon: Add PCIe link status check") Signed-off-by: Dominique Martinet Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin commit 8761992069d7285f7535496c15aeb09db9e44043 Author: Dmitry Torokhov Date: Thu Jun 6 23:02:48 2024 -0700 Input: elan_i2c - do not leave interrupt disabled on suspend failure [ Upstream commit 5f82c1e04721e7cd98e604eb4e58f0724d8e5a65 ] Make sure interrupts are not left disabled when we fail to suspend the touch controller. Fixes: 6696777c6506 ("Input: add driver for Elan I2C/SMbus touchpad") Link: https://lore.kernel.org/r/ZmKiiL-1wzKrhqBj@google.com Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin commit 6e1d3873ea4a77c10eba76ba2acdf57a3c21222a Author: Leon Romanovsky Date: Mon Jun 24 16:24:32 2024 +0300 RDMA/device: Return error earlier if port in not valid [ Upstream commit 917918f57a7b139c043e78c502876f2c286f4f0a ] There is no need to allocate port data if port provided is not valid. Fixes: c2261dd76b54 ("RDMA/device: Add ib_device_set_netdev() as an alternative to get_netdev") Link: https://lore.kernel.org/r/022047a8b16988fc88d4426da50bf60a4833311b.1719235449.git.leon@kernel.org Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin commit 729109a0d5a355a8a53c887f07ec8a05e24ef5c7 Author: Arnd Bergmann Date: Wed May 29 11:50:39 2024 +0200 mtd: make mtd_test.c a separate module [ Upstream commit a5cf054d325e6f362e82fe6d124a1871a4af8174 ] This file gets linked into nine different modules, which causes a warning: scripts/Makefile.build:236: drivers/mtd/tests/Makefile: mtd_test.o is added to multiple modules: mtd_nandbiterrs mtd_oobtest mtd_pagetest mtd_readtest mtd_speedtest mtd_stresstest mtd_subpagetest mtd_torturetest Make it a separate module instead. Fixes: a995c792280d ("mtd: tests: rename sources in order to link a helper object") Signed-off-by: Arnd Bergmann Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20240529095049.1915393-1-arnd@kernel.org Signed-off-by: Sasha Levin commit 638b75a19aa5e476f70d9ee6c7716db10e0c7e09 Author: Chen Ni Date: Fri Jun 28 16:05:34 2024 +0800 ASoC: max98088: Check for clk_prepare_enable() error [ Upstream commit 1a70579723fde3624a72dfea6e79e55be6e36659 ] clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of error. Fixes: 62a7fc32a628 ("ASoC: max98088: Add master clock handling") Signed-off-by: Chen Ni Link: https://patch.msgid.link/20240628080534.843815-1-nichen@iscas.ac.cn Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 6e17530f5bdd7f0dc6d0164dc9b864e19df4b56a Author: Honggang LI Date: Mon Jun 24 10:03:48 2024 +0800 RDMA/rxe: Don't set BTH_ACK_MASK for UC or UD QPs [ Upstream commit 4adcaf969d77d3d3aa3871bbadc196258a38aec6 ] BTH_ACK_MASK bit is used to indicate that an acknowledge (for this packet) should be scheduled by the responder. Both UC and UD QPs are unacknowledged, so don't set BTH_ACK_MASK for UC or UD QPs. Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Honggang LI Link: https://lore.kernel.org/r/20240624020348.494338-1-honggangli@163.com Reviewed-by: Zhu Yanjun Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit 6607140c185e0633157d04c78ec0bf89d728b21a Author: Leon Romanovsky Date: Sun Jun 16 19:17:30 2024 +0300 RDMA/mlx4: Fix truncated output warning in alias_GUID.c [ Upstream commit 5953e0647cec703ef436ead37fed48943507b433 ] drivers/infiniband/hw/mlx4/alias_GUID.c: In function ‘mlx4_ib_init_alias_guid_service’: drivers/infiniband/hw/mlx4/alias_GUID.c:878:74: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 5 [-Werror=format-truncation=] 878 | snprintf(alias_wq_name, sizeof alias_wq_name, "alias_guid%d", i); | ^~ drivers/infiniband/hw/mlx4/alias_GUID.c:878:63: note: directive argument in the range [-2147483641, 2147483646] 878 | snprintf(alias_wq_name, sizeof alias_wq_name, "alias_guid%d", i); | ^~~~~~~~~~~~~~ drivers/infiniband/hw/mlx4/alias_GUID.c:878:17: note: ‘snprintf’ output between 12 and 22 bytes into a destination of size 15 878 | snprintf(alias_wq_name, sizeof alias_wq_name, "alias_guid%d", i); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Fixes: a0c64a17aba8 ("mlx4: Add alias_guid mechanism") Link: https://lore.kernel.org/r/1951c9500109ca7e36dcd523f8a5f2d0d2a608d1.1718554641.git.leon@kernel.org Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit 409ca91035dbb3e1d1255d8fd99450aa0e055c59 Author: Leon Romanovsky Date: Sun Jun 16 19:16:33 2024 +0300 RDMA/mlx4: Fix truncated output warning in mad.c [ Upstream commit 0d2e6992fc956e3308cd5376c18567def4cb3967 ] Increase size of the name array to avoid truncated output warning. drivers/infiniband/hw/mlx4/mad.c: In function ‘mlx4_ib_alloc_demux_ctx’: drivers/infiniband/hw/mlx4/mad.c:2197:47: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 4 [-Werror=format-truncation=] 2197 | snprintf(name, sizeof(name), "mlx4_ibt%d", port); | ^~ drivers/infiniband/hw/mlx4/mad.c:2197:38: note: directive argument in the range [-2147483645, 2147483647] 2197 | snprintf(name, sizeof(name), "mlx4_ibt%d", port); | ^~~~~~~~~~~~ drivers/infiniband/hw/mlx4/mad.c:2197:9: note: ‘snprintf’ output between 10 and 20 bytes into a destination of size 12 2197 | snprintf(name, sizeof(name), "mlx4_ibt%d", port); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/hw/mlx4/mad.c:2205:48: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 3 [-Werror=format-truncation=] 2205 | snprintf(name, sizeof(name), "mlx4_ibwi%d", port); | ^~ drivers/infiniband/hw/mlx4/mad.c:2205:38: note: directive argument in the range [-2147483645, 2147483647] 2205 | snprintf(name, sizeof(name), "mlx4_ibwi%d", port); | ^~~~~~~~~~~~~ drivers/infiniband/hw/mlx4/mad.c:2205:9: note: ‘snprintf’ output between 11 and 21 bytes into a destination of size 12 2205 | snprintf(name, sizeof(name), "mlx4_ibwi%d", port); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/hw/mlx4/mad.c:2213:48: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 3 [-Werror=format-truncation=] 2213 | snprintf(name, sizeof(name), "mlx4_ibud%d", port); | ^~ drivers/infiniband/hw/mlx4/mad.c:2213:38: note: directive argument in the range [-2147483645, 2147483647] 2213 | snprintf(name, sizeof(name), "mlx4_ibud%d", port); | ^~~~~~~~~~~~~ drivers/infiniband/hw/mlx4/mad.c:2213:9: note: ‘snprintf’ output between 11 and 21 bytes into a destination of size 12 2213 | snprintf(name, sizeof(name), "mlx4_ibud%d", port); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors make[6]: *** [scripts/Makefile.build:244: drivers/infiniband/hw/mlx4/mad.o] Error 1 Fixes: fc06573dfaf8 ("IB/mlx4: Initialize SR-IOV IB support for slaves in master context") Link: https://lore.kernel.org/r/f3798b3ce9a410257d7e1ec7c9e285f1352e256a.1718554569.git.leon@kernel.org Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit 5e3f7847e6ff2d8ff41cf2559a80201589004637 Author: Andrei Lalaev Date: Mon Jun 17 20:30:18 2024 +0200 Input: qt1050 - handle CHIP_ID reading error [ Upstream commit 866a5c7e2781cf1b019072288f1f5c64186dcb63 ] If the device is missing, we get the following error: qt1050 3-0041: ID -1340767592 not supported Let's handle this situation and print more informative error when reading of CHIP_ID fails: qt1050 3-0041: Failed to read chip ID: -6 Fixes: cbebf5addec1 ("Input: qt1050 - add Microchip AT42QT1050 support") Signed-off-by: Andrei Lalaev Reviewed-by: Marco Felsch Link: https://lore.kernel.org/r/20240617183018.916234-1-andrey.lalaev@gmail.com Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin commit 3881d0622cf6ff776e38462f7ad64d1215bc47dc Author: Ilpo Järvinen Date: Tue May 7 13:25:16 2024 +0300 PCI: Fix resource double counting on remove & rescan [ Upstream commit 903534fa7d30214d8ba840ab1cd9e917e0c88e41 ] pbus_size_mem() keeps the size of the optional resources in children_add_size. When calculating the PCI bridge window size, calculate_memsize() lower bounds size by old_size before adding children_add_size and performing the window size alignment. This results in double counting for the resources in children_add_size because old_size may be based on the previous size of the bridge window after it has already included children_add_size (that is, size1 in pbus_size_mem() from an earlier invocation of that function). As a result, on repeated remove of the bus & rescan cycles the resource size keeps increasing when children_add_size is non-zero as can be seen from this extract: iomem0: 23fffd00000-23fffdfffff : PCI Bus 0000:03 # 1MiB iomem1: 20000000000-200001fffff : PCI Bus 0000:03 # 2MiB iomem2: 20000000000-200002fffff : PCI Bus 0000:03 # 3MiB iomem3: 20000000000-200003fffff : PCI Bus 0000:03 # 4MiB iomem4: 20000000000-200004fffff : PCI Bus 0000:03 # 5MiB Solve the double counting by moving old_size check later in calculate_memsize() so that children_add_size is already accounted for. After the patch, the bridge window retains its size as expected: iomem0: 23fffd00000-23fffdfffff : PCI Bus 0000:03 # 1MiB iomem1: 20000000000-200000fffff : PCI Bus 0000:03 # 1MiB iomem2: 20000000000-200000fffff : PCI Bus 0000:03 # 1MiB Fixes: a4ac9fea016f ("PCI : Calculate right add_size") Link: https://lore.kernel.org/r/20240507102523.57320-2-ilpo.jarvinen@linux.intel.com Tested-by: Lidong Wang Signed-off-by: Ilpo Järvinen Signed-off-by: Bjorn Helgaas Reviewed-by: Mika Westerberg Signed-off-by: Sasha Levin commit df5a9723b61c0b75fd131574a0fb7109ab6a3026 Author: Benjamin Coddington Date: Thu Jul 11 13:21:00 2024 -0400 SUNRPC: Fixup gss_status tracepoint error output [ Upstream commit b9fae9f06d84ffab0f3f9118f3a96bbcdc528bf6 ] The GSS routine errors are values, not flags. Fixes: 0c77668ddb4e ("SUNRPC: Introduce trace points in rpc_auth_gss.ko") Signed-off-by: Benjamin Coddington Reviewed-by: Chuck Lever Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit 6922e0346380d81759cee329f23727b2452b67e9 Author: Andreas Larsson Date: Wed Jul 10 11:41:53 2024 +0200 sparc64: Fix incorrect function signature and add prototype for prom_cif_init [ Upstream commit a6c3ea1ec96307dbfbb2f16d96c674c5cc80f445 ] Remove the unused cif_stack argument and add a protype in oplib_64.h Commit ef3e035c3a9b ("sparc64: Fix register corruption in top-most kernel stack frame during boot.") removed the cif_stack argument to prom_cif init in the declaration at the caller site and the usage of it within prom_cif_init, but not in the function signature of the function itself. This also fixes the following warning: arch/sparc/prom/p1275.c:52:6: warning: no previous prototype for ‘prom_cif_init’ Fixes: ef3e035c3a9b ("sparc64: Fix register corruption in top-most kernel stack frame during boot.") Link: https://lore.kernel.org/r/20240710094155.458731-3-andreas@gaisler.com Signed-off-by: Andreas Larsson Signed-off-by: Sasha Levin commit 5f20a407eda95c0140d5f93f29e32dbaa7a60777 Author: Jan Kara Date: Thu Jun 13 17:02:34 2024 +0200 ext4: avoid writing unitialized memory to disk in EA inodes [ Upstream commit 65121eff3e4c8c90f8126debf3c369228691c591 ] If the extended attribute size is not a multiple of block size, the last block in the EA inode will have uninitialized tail which will get written to disk. We will never expose the data to userspace but still this is not a good practice so just zero out the tail of the block as it isn't going to cause a noticeable performance overhead. Fixes: e50e5129f384 ("ext4: xattr-in-inode support") Reported-by: syzbot+9c1fe13fcb51574b249b@syzkaller.appspotmail.com Reported-by: Hugh Dickins Signed-off-by: Jan Kara Link: https://patch.msgid.link/20240613150234.25176-1-jack@suse.cz Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit feed3fcb6f8ca5e69ba386d99572a192a07cc20c Author: NeilBrown Date: Wed Jun 19 11:05:13 2024 +1000 SUNRPC: avoid soft lockup when transmitting UDP to reachable server. [ Upstream commit 6258cf25d5e3155c3219ab5a79b970eef7996356 ] Prior to the commit identified below, call_transmit_status() would handle -EPERM and other errors related to an unreachable server by falling through to call_status() which added a 3-second delay and handled the failure as a timeout. Since that commit, call_transmit_status() falls through to handle_bind(). For UDP this moves straight on to handle_connect() and handle_transmit() so we immediately retransmit - and likely get the same error. This results in an indefinite loop in __rpc_execute() which triggers a soft-lockup warning. For the errors that indicate an unreachable server, call_transmit_status() should fall back to call_status() as it did before. This cannot cause the thundering herd that the previous patch was avoiding, as the call_status() will insert a delay. Fixes: ed7dc973bd91 ("SUNRPC: Prevent thundering herd when the socket is not connected") Signed-off-by: NeilBrown Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit 72e06bedd5e8952999061f469be240b8ab79619c Author: Javier Carrasco Date: Wed Jun 26 21:37:03 2024 +0200 mfd: omap-usb-tll: Use struct_size to allocate tll [ Upstream commit 40176714c818b0b6a2ca8213cdb7654fbd49b742 ] Commit 16c2004d9e4d ("mfd: omap-usb-tll: Allocate driver data at once") changed the memory allocation of 'tll' to consolidate it into a single allocation, introducing an incorrect size calculation. In particular, the allocation for the array of pointers was converted into a single-pointer allocation. The memory allocation used to occur in two steps: tll = devm_kzalloc(dev, sizeof(struct usbtll_omap), GFP_KERNEL); tll->ch_clk = devm_kzalloc(dev, sizeof(struct clk *) * tll->nch, GFP_KERNEL); And it turned that into the following allocation: tll = devm_kzalloc(dev, sizeof(*tll) + sizeof(tll->ch_clk[nch]), GFP_KERNEL); sizeof(tll->ch_clk[nch]) returns the size of a single pointer instead of the expected nch pointers. This bug went unnoticed because the allocation size was small enough to fit within the minimum size of a memory allocation for this particular case [1]. The complete allocation can still be done at once with the struct_size macro, which comes in handy for structures with a trailing flexible array. Fix the memory allocation to obtain the original size again. Link: https://lore.kernel.org/all/202406261121.2FFD65647@keescook/ [1] Fixes: 16c2004d9e4d ("mfd: omap-usb-tll: Allocate driver data at once") Reviewed-by: Kees Cook Signed-off-by: Javier Carrasco Fixes: commit 16c2004d9e4d ("mfd: omap-usb-tll: Allocate driver data at once") Link: https://lore.kernel.org/r/20240626-omap-usb-tll-counted_by-v2-1-4bedf20d1b51@gmail.com Signed-off-by: Lee Jones Signed-off-by: Sasha Levin commit 62ef8d7816c8e4a6088275553818b9afc0ffaa03 Author: Chen Ni Date: Fri Jun 21 15:10:31 2024 +0800 drm/qxl: Add check for drm_cvt_mode [ Upstream commit 7bd09a2db0f617377027a2bb0b9179e6959edff3 ] Add check for the return value of drm_cvt_mode() and return the error if it fails in order to avoid NULL pointer dereference. Fixes: 1b043677d4be ("drm/qxl: add qxl_add_mode helper function") Signed-off-by: Chen Ni Reviewed-by: Heng Qi Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20240621071031.1987974-1-nichen@iscas.ac.cn Signed-off-by: Sasha Levin commit 024e357a6ff0f07318ca8d2ed962ca00da2219c2 Author: Lucas Stach Date: Fri Jun 21 19:11:06 2024 +0200 drm/etnaviv: fix DMA direction handling for cached RW buffers [ Upstream commit 58979ad6330a70450ed78837be3095107d022ea9 ] The dma sync operation needs to be done with DMA_BIDIRECTIONAL when the BO is prepared for both read and write operations. Fixes: a8c21a5451d8 ("drm/etnaviv: add initial etnaviv DRM driver") Signed-off-by: Lucas Stach Reviewed-by: Philipp Zabel Reviewed-by: Christian Gmeiner Signed-off-by: Sasha Levin commit 9e43e7212f00f5db2eed38d1d1fe8d9ebea0a205 Author: Namhyung Kim Date: Fri Jun 21 10:05:25 2024 -0700 perf report: Fix condition in sort__sym_cmp() [ Upstream commit cb39d05e67dc24985ff9f5150e71040fa4d60ab8 ] It's expected that both hist entries are in the same hists when comparing two. But the current code in the function checks one without dso sort key and other with the key. This would make the condition true in any case. I guess the intention of the original commit was to add '!' for the right side too. But as it should be the same, let's just remove it. Fixes: 69849fc5d2119 ("perf hists: Move sort__has_dso into struct perf_hpp_list") Reviewed-by: Kan Liang Signed-off-by: Namhyung Kim Link: https://lore.kernel.org/r/20240621170528.608772-2-namhyung@kernel.org Signed-off-by: Sasha Levin commit d1415125b701ef13370e2761f691ec632a5eb93a Author: Hans de Goede Date: Sat May 4 18:25:33 2024 +0200 leds: trigger: Unregister sysfs attributes before calling deactivate() [ Upstream commit c0dc9adf9474ecb7106e60e5472577375aedaed3 ] Triggers which have trigger specific sysfs attributes typically store related data in trigger-data allocated by the activate() callback and freed by the deactivate() callback. Calling device_remove_groups() after calling deactivate() leaves a window where the sysfs attributes show/store functions could be called after deactivation and then operate on the just freed trigger-data. Move the device_remove_groups() call to before deactivate() to close this race window. This also makes the deactivation path properly do things in reverse order of the activation path which calls the activate() callback before calling device_add_groups(). Fixes: a7e7a3156300 ("leds: triggers: add device attribute support") Cc: Uwe Kleine-König Signed-off-by: Hans de Goede Acked-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20240504162533.76780-1-hdegoede@redhat.com Signed-off-by: Lee Jones Signed-off-by: Sasha Levin commit 3a2a9cc47d5d8b210bba9e56e83d9f66225f030e Author: Laurent Pinchart Date: Sun Nov 19 03:11:51 2023 +0200 media: renesas: vsp1: Store RPF partition configuration per RPF instance [ Upstream commit a213bc09b1025c771ee722ee341af1d84375db8a ] The vsp1_partition structure stores the RPF partition configuration in a single field for all RPF instances, while each RPF can have its own configuration. Fix it by storing the configuration separately for each RPF instance. Signed-off-by: Laurent Pinchart Fixes: ab45e8585182 ("media: v4l: vsp1: Allow entities to participate in the partition algorithm") Reviewed-by: Jacopo Mondi Signed-off-by: Sasha Levin commit 4f33ef74eccf98de75ceee4f42d12631c694e8fa Author: Laurent Pinchart Date: Sun May 5 20:22:27 2024 +0300 media: renesas: vsp1: Fix _irqsave and _irq mix [ Upstream commit 57edbbcf5258c378a9b9d0c80d33b03a010b22c8 ] The histogram support mixes _irqsave and _irq, causing the following smatch warning: drivers/media/platform/renesas/vsp1/vsp1_histo.c:153 histo_stop_streaming() warn: mixing irqsave and irq The histo_stop_streaming() calls spin_lock_irqsave() followed by wait_event_lock_irq(). The former hints that interrupts may be disabled by the caller, while the latter reenables interrupts unconditionally. This doesn't cause any real bug, as the function is always called with interrupts enabled, but the pattern is still incorrect. Fix the problem by using spin_lock_irq() instead of spin_lock_irqsave() in histo_stop_streaming(). While at it, switch to spin_lock_irq() and spin_lock() as appropriate elsewhere. Fixes: 99362e32332b ("[media] v4l: vsp1: Add histogram support") Reported-by: Dan Carpenter Closes: https://lore.kernel.org/linux-renesas-soc/164d74ff-312c-468f-be64-afa7182cd2f4@moroto.mountain/ Reviewed-by: Kieran Bingham Signed-off-by: Laurent Pinchart Signed-off-by: Sasha Levin commit 0063a2822dbdb184d0419257fadf6c4c5aaf37d4 Author: Daniel Schaefer Date: Sun Jun 2 14:50:53 2024 +0800 media: uvcvideo: Override default flags [ Upstream commit 86419686e66da5b90a07fb8a40ab138fe97189b5 ] When the UVC device has a control that is readonly it doesn't set the SET_CUR flag. For example the privacy control has SET_CUR flag set in the defaults in the `uvc_ctrls` variable. Even if the device does not have it set, it's not cleared by uvc_ctrl_get_flags(). Originally written with assignment in commit 859086ae3636 ("media: uvcvideo: Apply flags from device to actual properties"). But changed to |= in commit 0dc68cabdb62 ("media: uvcvideo: Prevent setting unavailable flags"). It would not clear the default flags. With this patch applied the correct flags are reported to user space. Tested with: ``` > v4l2-ctl --list-ctrls | grep privacy privacy 0x009a0910 (bool) : default=0 value=0 flags=read-only ``` Signed-off-by: Daniel Schaefer Fixes: 0dc68cabdb62 ("media: uvcvideo: Prevent setting unavailable flags") Reviewed-by: Ricardo Ribalda Reviewed-by: Laurent Pinchart Link: https://lore.kernel.org/r/20240602065053.36850-1-dhs@frame.work Signed-off-by: Laurent Pinchart Signed-off-by: Sasha Levin commit c65fe17a4981aa7069d23d1e2fc38ae9fe25553a Author: Ricardo Ribalda Date: Wed Dec 23 14:35:21 2020 +0100 media: uvcvideo: Allow entity-defined get_info and get_cur [ Upstream commit 65900c581d014499f0f8ceabfc02c652e9a88771 ] Allows controls to get their properties and current value from an entity-defined function instead of via a query to the USB device. Signed-off-by: Ricardo Ribalda Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab Stable-dep-of: 86419686e66d ("media: uvcvideo: Override default flags") Signed-off-by: Sasha Levin commit f8bcdad28647659b7807e262fd8b427370698a88 Author: Aleksandr Burakov Date: Fri Feb 16 15:40:06 2024 +0300 saa7134: Unchecked i2c_transfer function result fixed [ Upstream commit 9d8683b3fd93f0e378f24dc3d9604e5d7d3e0a17 ] Return value of function 'i2c_transfer' is not checked that may cause undefined behaviour. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 2cf36ac44730 ("[PATCH] v4l: 656: added support for the following cards") Signed-off-by: Aleksandr Burakov Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin commit 031eda178e8e09c64c41887dc31fc56cb6092e2f Author: Ricardo Ribalda Date: Mon May 6 21:10:27 2024 +0000 media: imon: Fix race getting ictx->lock [ Upstream commit 24147897507cd3a7d63745d1518a638bf4132238 ] Lets fix a race between mutex_is_lock() and mutex_lock(). <-mutex is not locked if (!mutex_is_locked(&ictx->lock)) { unlock = true; <- mutex is locked externaly mutex_lock(&ictx->lock); } Let's use mutex_trylock() that does mutex_is_lock() and mutex_lock() atomically. Fix the following cocci warning: drivers/media/rc/imon.c:1167:1-7: preceding lock on line 1153 Fixes: 23ef710e1a6c ("[media] imon: add conditional locking in change_protocol") Signed-off-by: Ricardo Ribalda Signed-off-by: Sean Young Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin commit fce50a628e72736b15cfbbdf5cccb15de3e4b037 Author: Zheng Yejian Date: Thu May 9 20:44:14 2024 +0800 media: dvb-usb: Fix unexpected infinite loop in dvb_usb_read_remote_control() [ Upstream commit 2052138b7da52ad5ccaf74f736d00f39a1c9198c ] Infinite log printing occurs during fuzz test: rc rc1: DViCO FusionHDTV DVB-T USB (LGZ201) as ... ... dvb-usb: schedule remote query interval to 100 msecs. dvb-usb: DViCO FusionHDTV DVB-T USB (LGZ201) successfully initialized ... dvb-usb: bulk message failed: -22 (1/0) dvb-usb: bulk message failed: -22 (1/0) dvb-usb: bulk message failed: -22 (1/0) ... dvb-usb: bulk message failed: -22 (1/0) Looking into the codes, there is a loop in dvb_usb_read_remote_control(), that is in rc_core_dvb_usb_remote_init() create a work that will call dvb_usb_read_remote_control(), and this work will reschedule itself at 'rc_interval' intervals to recursively call dvb_usb_read_remote_control(), see following code snippet: rc_core_dvb_usb_remote_init() { ... INIT_DELAYED_WORK(&d->rc_query_work, dvb_usb_read_remote_control); schedule_delayed_work(&d->rc_query_work, msecs_to_jiffies(rc_interval)); ... } dvb_usb_read_remote_control() { ... err = d->props.rc.core.rc_query(d); if (err) err(...) // Did not return even if query failed schedule_delayed_work(&d->rc_query_work, msecs_to_jiffies(rc_interval)); } When the infinite log printing occurs, the query callback 'd->props.rc.core.rc_query' is cxusb_rc_query(). And the log is due to the failure of finding a valid 'generic_bulk_ctrl_endpoint' in usb_bulk_msg(), see following code snippet: cxusb_rc_query() { cxusb_ctrl_msg() { dvb_usb_generic_rw() { ret = usb_bulk_msg(d->udev, usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint),...); if (ret) err("bulk message failed: %d (%d/%d)",ret,wlen,actlen); ... } ... } By analyzing the corresponding USB descriptor, it shows that the bNumEndpoints is 0 in its interface descriptor, but the 'generic_bulk_ctrl_endpoint' is 1, that means user don't configure a valid endpoint for 'generic_bulk_ctrl_endpoint', therefore this 'invalid' USB device should be rejected before it calls into dvb_usb_read_remote_control(). To fix it, we need to add endpoint check for 'generic_bulk_ctrl_endpoint'. And as Sean suggested, the same check and clear halts should be done for 'generic_bulk_ctrl_endpoint_response'. So introduce dvb_usb_check_bulk_endpoint() to do it for both of them. Fixes: 4d43e13f723e ("V4L/DVB (4643): Multi-input patch for DVB-USB device") Signed-off-by: Zheng Yejian Signed-off-by: Sean Young Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin commit 5f6aeae1e724bc2d667536a5a972f1e993d9705e Author: Greg Kroah-Hartman Date: Mon Sep 14 17:37:46 2020 +0200 USB: move snd_usb_pipe_sanity_check into the USB core [ Upstream commit fcc2cc1f35613c016e1de25bb001bfdd9eaa25f9 ] snd_usb_pipe_sanity_check() is a great function, so let's move it into the USB core so that other parts of the kernel, including the USB core, can call it. Name it usb_pipe_type_check() to match the existing usb_urb_ep_type_check() call, which now uses this function. Cc: Jaroslav Kysela Cc: "Gustavo A. R. Silva" Cc: Eli Billauer Cc: Emiliano Ingrassia Cc: Alan Stern Cc: Alexander Tsoy Cc: "Geoffrey D. Bennett" Cc: Jussi Laako Cc: Nick Kossifidis Cc: Dmitry Panchenko Cc: Chris Wulff Cc: Jesus Ramos Reviewed-by: Takashi Iwai Link: https://lore.kernel.org/r/20200914153756.3412156-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 2052138b7da5 ("media: dvb-usb: Fix unexpected infinite loop in dvb_usb_read_remote_control()") Signed-off-by: Sasha Levin commit db071a63d775562370e1b1cb245eee35b2cf6af9 Author: Amit Cohen Date: Thu Jul 11 17:27:02 2024 +0200 selftests: forwarding: devlink_lib: Wait for udev events after reloading [ Upstream commit f67a90a0c8f5b3d0acc18f10650d90fec44775f9 ] Lately, an additional locking was added by commit c0a40097f0bc ("drivers: core: synchronize really_probe() and dev_uevent()"). The locking protects dev_uevent() calling. This function is used to send messages from the kernel to user space. Uevent messages notify user space about changes in device states, such as when a device is added, removed, or changed. These messages are used by udev (or other similar user-space tools) to apply device-specific rules. After reloading devlink instance, udev events should be processed. This locking causes a short delay of udev events handling. One example for useful udev rule is renaming ports. 'forwading.config' can be configured to use names after udev rules are applied. Some tests run devlink_reload() and immediately use the updated names. This worked before the above mentioned commit was pushed, but now the delay of uevent messages causes that devlink_reload() returns before udev events are handled and tests fail. Adjust devlink_reload() to not assume that udev events are already processed when devlink reload is done, instead, wait for udev events to ensure they are processed before returning from the function. Without this patch: TESTS='rif_mac_profile' ./resource_scale.sh TEST: 'rif_mac_profile' 4 [ OK ] sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory Cannot find device "swp1" Cannot find device "swp2" TEST: setup_wait_dev (: Interface swp1 does not come up.) [FAIL] With this patch: $ TESTS='rif_mac_profile' ./resource_scale.sh TEST: 'rif_mac_profile' 4 [ OK ] TEST: 'rif_mac_profile' overflow 5 [ OK ] This is relevant not only for this test. Fixes: bc7cbb1e9f4c ("selftests: forwarding: Add devlink_lib.sh") Signed-off-by: Amit Cohen Reviewed-by: Ido Schimmel Signed-off-by: Petr Machata Link: https://patch.msgid.link/89367666e04b38a8993027f1526801ca327ab96a.1720709333.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit c90b1cd7758fd4839909e838ae195d19f8065d76 Author: Alexey Kodanev Date: Mon Jul 8 10:50:08 2024 +0000 bna: adjust 'name' buf size of bna_tcb and bna_ccb structures [ Upstream commit c9741a03dc8e491e57b95fba0058ab46b7e506da ] To have enough space to write all possible sprintf() args. Currently 'name' size is 16, but the first '%s' specifier may already need at least 16 characters, since 'bnad->netdev->name' is used there. For '%d' specifiers, assume that they require: * 1 char for 'tx_id + tx_info->tcb[i]->id' sum, BNAD_MAX_TXQ_PER_TX is 8 * 2 chars for 'rx_id + rx_info->rx_ctrl[i].ccb->id', BNAD_MAX_RXP_PER_RX is 16 And replace sprintf with snprintf. Detected using the static analysis tool - Svace. Fixes: 8b230ed8ec96 ("bna: Brocade 10Gb Ethernet device driver") Signed-off-by: Alexey Kodanev Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit f071190ec34e0eb32a68e8da0bbd1336bc3dfc0e Author: Johannes Berg Date: Tue Jul 9 08:34:09 2024 +0200 wifi: virt_wifi: don't use strlen() in const context [ Upstream commit 6e909f489191b365364e9d636dec33b5dfd4e5eb ] Looks like not all compilers allow strlen(constant) as a constant, so don't do that. Instead, revert back to defining the length as the first submission had it. Fixes: b5d14b0c6716 ("wifi: virt_wifi: avoid reporting connection success with wrong SSID") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202407090934.NnR1TUbW-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202407090944.mpwLHGt9-lkp@intel.com/ Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 79957e626d8fab04f159b58f9c495a4f6906f2d1 Author: Gaosheng Cui Date: Sat Jul 6 14:50:08 2024 +0800 gss_krb5: Fix the error handling path for crypto_sync_skcipher_setkey [ Upstream commit a3123341dc358952ce2bf8067fbdfb7eaadf71bb ] If we fail to call crypto_sync_skcipher_setkey, we should free the memory allocation for cipher, replace err_return with err_free_cipher to free the memory of cipher. Fixes: 4891f2d008e4 ("gss_krb5: import functionality to derive keys into the kernel") Signed-off-by: Gaosheng Cui Reviewed-by: Simon Horman Signed-off-by: Chuck Lever Signed-off-by: Sasha Levin commit 994fc2164a03200c3bf42fb45b3d49d9d6d33a4d Author: En-Wei Wu Date: Fri Jul 5 10:37:56 2024 +0800 wifi: virt_wifi: avoid reporting connection success with wrong SSID [ Upstream commit b5d14b0c6716fad7f0c94ac6e1d6f60a49f985c7 ] When user issues a connection with a different SSID than the one virt_wifi has advertised, the __cfg80211_connect_result() will trigger the warning: WARN_ON(bss_not_found). The issue is because the connection code in virt_wifi does not check the SSID from user space (it only checks the BSSID), and virt_wifi will call cfg80211_connect_result() with WLAN_STATUS_SUCCESS even if the SSID is different from the one virt_wifi has advertised. Eventually cfg80211 won't be able to find the cfg80211_bss and generate the warning. Fixed it by checking the SSID (from user space) in the connection code. Fixes: c7cdba31ed8b ("mac80211-next: rtnetlink wifi simulation device") Reported-by: syzbot+d6eb9cee2885ec06f5e3@syzkaller.appspotmail.com Signed-off-by: En-Wei Wu Link: https://patch.msgid.link/20240705023756.10954-1-en-wei.wu@canonical.com Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 94637e9927360f00a2a1ddaf2b2f2804b365d835 Author: Shai Malin Date: Mon Sep 13 10:50:24 2021 +0300 qed: Improve the stack space of filter_config() [ Upstream commit f55e36d5ab76c3097ff36ecea60b91c6b0d80fc8 ] As it was reported and discussed in: https://lore.kernel.org/lkml/CAHk-=whF9F89vsfH8E9TGc0tZA-yhzi2Di8wOtquNB5vRkFX5w@mail.gmail.com/ This patch improves the stack space of qede_config_rx_mode() by splitting filter_config() to 3 functions and removing the union qed_filter_type_params. Reported-by: Naresh Kamboju Signed-off-by: Ariel Elior Signed-off-by: Shai Malin Signed-off-by: David S. Miller Stable-dep-of: b5d14b0c6716 ("wifi: virt_wifi: avoid reporting connection success with wrong SSID") Signed-off-by: Sasha Levin commit b54962dc4eec9e46e03795bb65cf3bd943cfd815 Author: Adrian Hunter Date: Mon Jun 24 23:10:59 2024 +0300 perf: Prevent passing zero nr_pages to rb_alloc_aux() [ Upstream commit dbc48c8f41c208082cfa95e973560134489e3309 ] nr_pages is unsigned long but gets passed to rb_alloc_aux() as an int, and is stored as an int. Only power-of-2 values are accepted, so if nr_pages is a 64_bit value, it will be passed to rb_alloc_aux() as zero. That is not ideal because: 1. the value is incorrect 2. rb_alloc_aux() is at risk of misbehaving, although it manages to return -ENOMEM in that case, it is a result of passing zero to get_order() even though the get_order() result is documented to be undefined in that case. Fix by simply validating the maximum supported value in the first place. Use -ENOMEM error code for consistency with the current error code that is returned in that case. Fixes: 45bfb2e50471 ("perf: Add AUX area to ring buffer for raw data streams") Signed-off-by: Adrian Hunter Signed-off-by: Peter Zijlstra (Intel) Link: https://lore.kernel.org/r/20240624201101.60186-6-adrian.hunter@intel.com Signed-off-by: Sasha Levin commit 7d87d26bd186456cf90e19a28f89b07901cb225f Author: Adrian Hunter Date: Mon Jun 24 23:10:58 2024 +0300 perf: Fix perf_aux_size() for greater-than 32-bit size [ Upstream commit 3df94a5b1078dfe2b0c03f027d018800faf44c82 ] perf_buffer->aux_nr_pages uses a 32-bit type, so a cast is needed to calculate a 64-bit size. Fixes: 45bfb2e50471 ("perf: Add AUX area to ring buffer for raw data streams") Signed-off-by: Adrian Hunter Signed-off-by: Peter Zijlstra (Intel) Link: https://lore.kernel.org/r/20240624201101.60186-5-adrian.hunter@intel.com Signed-off-by: Sasha Levin commit 818c1f5ff39f5ede713adb3b97f459411955bc8e Author: Adrian Hunter Date: Mon Jun 24 23:10:57 2024 +0300 perf/x86/intel/pt: Fix pt_topa_entry_for_page() address calculation [ Upstream commit 3520b251dcae2b4a27b95cd6f745c54fd658bda5 ] Currently, perf allocates an array of page pointers which is limited in size by MAX_PAGE_ORDER. That in turn limits the maximum Intel PT buffer size to 2GiB. Should that limitation be lifted, the Intel PT driver can support larger sizes, except for one calculation in pt_topa_entry_for_page(), which is limited to 32-bits. Fix pt_topa_entry_for_page() address calculation by adding a cast. Fixes: 39152ee51b77 ("perf/x86/intel/pt: Get rid of reverse lookup table for ToPA") Signed-off-by: Adrian Hunter Signed-off-by: Peter Zijlstra (Intel) Link: https://lore.kernel.org/r/20240624201101.60186-4-adrian.hunter@intel.com Signed-off-by: Sasha Levin commit 4443bd20326277b62a900976b834697facb01230 Author: Pablo Neira Ayuso Date: Mon Jun 3 20:16:59 2024 +0200 netfilter: nf_tables: rise cap on SELinux secmark context [ Upstream commit e29630247be24c3987e2b048f8e152771b32d38b ] secmark context is artificially limited 256 bytes, rise it to 4Kbytes. Fixes: fb961945457f ("netfilter: nf_tables: add SECMARK support") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 576d12ba53fb56b60b96b52db281c17ac2b00955 Author: Ismael Luceno Date: Thu May 23 18:54:44 2024 +0200 ipvs: Avoid unnecessary calls to skb_is_gso_sctp [ Upstream commit 53796b03295cf7ab1fc8600016fa6dfbf4a494a0 ] In the context of the SCTP SNAT/DNAT handler, these calls can only return true. Fixes: e10d3ba4d434 ("ipvs: Fix checksumming on GSO of SCTP packets") Signed-off-by: Ismael Luceno Acked-by: Julian Anastasov Acked-by: Simon Horman Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 8541b8ac35de9139f2e58f3d2bbaf68f874dbba5 Author: Csókás, Bence Date: Wed Jun 19 14:31:11 2024 +0200 net: fec: Fix FEC_ECR_EN1588 being cleared on link-down [ Upstream commit c32fe1986f27cac329767d3497986e306cad1d5e ] FEC_ECR_EN1588 bit gets cleared after MAC reset in `fec_stop()`, which makes all 1588 functionality shut down, and all the extended registers disappear, on link-down, making the adapter fall back to compatibility "dumb mode". However, some functionality needs to be retained (e.g. PPS) even without link. Fixes: 6605b730c061 ("FEC: Add time stamping code and a PTP hardware clock") Cc: Richard Cochran Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/netdev/5fa9fadc-a89d-467a-aae9-c65469ff5fe1@lunn.ch/ Signed-off-by: Csókás, Bence Reviewed-by: Wei Fang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit c1df19258a688f15a9f521d219c57b9c10ab7451 Author: Csókás Bence Date: Mon Feb 12 16:37:17 2024 +0100 net: fec: Refactor: #define magic constants [ Upstream commit ff049886671ccd4e624a30ec464cb20e4c39a313 ] Add defines for bits of ECR, RCR control registers, TX watermark etc. Signed-off-by: Csókás Bence Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20240212153717.10023-1-csokas.bence@prolan.hu Signed-off-by: Jakub Kicinski Stable-dep-of: c32fe1986f27 ("net: fec: Fix FEC_ECR_EN1588 being cleared on link-down") Signed-off-by: Sasha Levin commit b289ebb0516526cb4abae081b7ec29fd4fa1209d Author: Baochen Qiang Date: Thu Jun 6 10:06:53 2024 +0800 wifi: cfg80211: handle 2x996 RU allocation in cfg80211_calculate_bitrate_he() [ Upstream commit bcbd771cd5d68c0c52567556097d75f9fc4e7cd6 ] Currently NL80211_RATE_INFO_HE_RU_ALLOC_2x996 is not handled in cfg80211_calculate_bitrate_he(), leading to below warning: kernel: invalid HE MCS: bw:6, ru:6 kernel: WARNING: CPU: 0 PID: 2312 at net/wireless/util.c:1501 cfg80211_calculate_bitrate_he+0x22b/0x270 [cfg80211] Fix it by handling 2x996 RU allocation in the same way as 160 MHz bandwidth. Fixes: c4cbaf7973a7 ("cfg80211: Add support for HE") Signed-off-by: Baochen Qiang Link: https://msgid.link/20240606020653.33205-3-quic_bqiang@quicinc.com Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit f0e93132c0a869cae672aa2cdf4b638ab8e07ffd Author: Baochen Qiang Date: Thu Jun 6 10:06:52 2024 +0800 wifi: cfg80211: fix typo in cfg80211_calculate_bitrate_he() [ Upstream commit 9ee0d44f055276fe2802b2f65058e920853f4f99 ] rates_996 is mistakenly written as rates_969, fix it. Fixes: c4cbaf7973a7 ("cfg80211: Add support for HE") Signed-off-by: Baochen Qiang Link: https://msgid.link/20240606020653.33205-2-quic_bqiang@quicinc.com Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 4dc09f6f260db3c4565a4ec52ba369393598f2fb Author: Ido Schimmel Date: Thu Jun 6 16:49:42 2024 +0200 mlxsw: spectrum_acl_erp: Fix object nesting warning [ Upstream commit 97d833ceb27dc19f8777d63f90be4a27b5daeedf ] ACLs in Spectrum-2 and newer ASICs can reside in the algorithmic TCAM (A-TCAM) or in the ordinary circuit TCAM (C-TCAM). The former can contain more ACLs (i.e., tc filters), but the number of masks in each region (i.e., tc chain) is limited. In order to mitigate the effects of the above limitation, the device allows filters to share a single mask if their masks only differ in up to 8 consecutive bits. For example, dst_ip/25 can be represented using dst_ip/24 with a delta of 1 bit. The C-TCAM does not have a limit on the number of masks being used (and therefore does not support mask aggregation), but can contain a limited number of filters. The driver uses the "objagg" library to perform the mask aggregation by passing it objects that consist of the filter's mask and whether the filter is to be inserted into the A-TCAM or the C-TCAM since filters in different TCAMs cannot share a mask. The set of created objects is dependent on the insertion order of the filters and is not necessarily optimal. Therefore, the driver will periodically ask the library to compute a more optimal set ("hints") by looking at all the existing objects. When the library asks the driver whether two objects can be aggregated the driver only compares the provided masks and ignores the A-TCAM / C-TCAM indication. This is the right thing to do since the goal is to move as many filters as possible to the A-TCAM. The driver also forbids two identical masks from being aggregated since this can only happen if one was intentionally put in the C-TCAM to avoid a conflict in the A-TCAM. The above can result in the following set of hints: H1: {mask X, A-TCAM} -> H2: {mask Y, A-TCAM} // X is Y + delta H3: {mask Y, C-TCAM} -> H4: {mask Z, A-TCAM} // Y is Z + delta After getting the hints from the library the driver will start migrating filters from one region to another while consulting the computed hints and instructing the device to perform a lookup in both regions during the transition. Assuming a filter with mask X is being migrated into the A-TCAM in the new region, the hints lookup will return H1. Since H2 is the parent of H1, the library will try to find the object associated with it and create it if necessary in which case another hints lookup (recursive) will be performed. This hints lookup for {mask Y, A-TCAM} will either return H2 or H3 since the driver passes the library an object comparison function that ignores the A-TCAM / C-TCAM indication. This can eventually lead to nested objects which are not supported by the library [1]. Fix by removing the object comparison function from both the driver and the library as the driver was the only user. That way the lookup will only return exact matches. I do not have a reliable reproducer that can reproduce the issue in a timely manner, but before the fix the issue would reproduce in several minutes and with the fix it does not reproduce in over an hour. Note that the current usefulness of the hints is limited because they include the C-TCAM indication and represent aggregation that cannot actually happen. This will be addressed in net-next. [1] WARNING: CPU: 0 PID: 153 at lib/objagg.c:170 objagg_obj_parent_assign+0xb5/0xd0 Modules linked in: CPU: 0 PID: 153 Comm: kworker/0:18 Not tainted 6.9.0-rc6-custom-g70fbc2c1c38b #42 Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:objagg_obj_parent_assign+0xb5/0xd0 [...] Call Trace: __objagg_obj_get+0x2bb/0x580 objagg_obj_get+0xe/0x80 mlxsw_sp_acl_erp_mask_get+0xb5/0xf0 mlxsw_sp_acl_atcam_entry_add+0xe8/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270 mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510 process_one_work+0x151/0x370 Fixes: 9069a3817d82 ("lib: objagg: implement optimization hints assembly and use hints for object creation") Signed-off-by: Ido Schimmel Reviewed-by: Amit Cohen Tested-by: Alexander Zubkov Signed-off-by: Petr Machata Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 8161263362154cbebfbf4808097b956a6a8cb98a Author: Ido Schimmel Date: Thu Jun 6 16:49:41 2024 +0200 lib: objagg: Fix general protection fault [ Upstream commit b4a3a89fffcdf09702b1f161b914e52abca1894d ] The library supports aggregation of objects into other objects only if the parent object does not have a parent itself. That is, nesting is not supported. Aggregation happens in two cases: Without and with hints, where hints are a pre-computed recommendation on how to aggregate the provided objects. Nesting is not possible in the first case due to a check that prevents it, but in the second case there is no check because the assumption is that nesting cannot happen when creating objects based on hints. The violation of this assumption leads to various warnings and eventually to a general protection fault [1]. Before fixing the root cause, error out when nesting happens and warn. [1] general protection fault, probably for non-canonical address 0xdead000000000d90: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 1083 Comm: kworker/1:9 Tainted: G W 6.9.0-rc6-custom-gd9b4f1cca7fb #7 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_erp_bf_insert+0x25/0x80 [...] Call Trace: mlxsw_sp_acl_atcam_entry_add+0x256/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270 mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 Fixes: 9069a3817d82 ("lib: objagg: implement optimization hints assembly and use hints for object creation") Reported-by: Alexander Zubkov Signed-off-by: Ido Schimmel Reviewed-by: Amit Cohen Tested-by: Alexander Zubkov Signed-off-by: Petr Machata Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 32e4baeaae7e33a77596398062374124f0508ae7 Author: Geliang Tang Date: Thu May 23 14:50:03 2024 +0800 selftests/bpf: Check length of recv in test_sockmap [ Upstream commit de1b5ea789dc28066cc8dc634b6825bd6148f38b ] The value of recv in msg_loop may be negative, like EWOULDBLOCK, so it's necessary to check if it is positive before accumulating it to bytes_recvd. Fixes: 16962b2404ac ("bpf: sockmap, add selftests") Signed-off-by: Geliang Tang Signed-off-by: Daniel Borkmann Tested-by: Jakub Sitnicki Acked-by: John Fastabend Link: https://lore.kernel.org/bpf/5172563f7c7b2a2e953cef02e89fc34664a7b190.1716446893.git.tanggeliang@kylinos.cn Signed-off-by: Sasha Levin commit 130a1a9acb709691819542755ba0c93c4bb53728 Author: Guangguan Wang Date: Mon Jun 3 11:00:18 2024 +0800 net/smc: set rmb's SG_MAX_SINGLE_ALLOC limitation only when CONFIG_ARCH_NO_SG_CHAIN is defined [ Upstream commit 3ac14b9dfbd345e891d48d89f6c2fa519848f0f4 ] SG_MAX_SINGLE_ALLOC is used to limit maximum number of entries that will be allocated in one piece of scatterlist. When the entries of scatterlist exceeds SG_MAX_SINGLE_ALLOC, sg chain will be used. From commit 7c703e54cc71 ("arch: switch the default on ARCH_HAS_SG_CHAIN"), we can know that the macro CONFIG_ARCH_NO_SG_CHAIN is used to identify whether sg chain is supported. So, SMC-R's rmb buffer should be limited by SG_MAX_SINGLE_ALLOC only when the macro CONFIG_ARCH_NO_SG_CHAIN is defined. Fixes: a3fe3d01bd0d ("net/smc: introduce sg-logic for RMBs") Signed-off-by: Guangguan Wang Co-developed-by: Wen Gu Signed-off-by: Wen Gu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 33749ad4da50331a439e41ad7bfce598c02cff64 Author: Stefan Raspl Date: Mon Aug 9 10:10:14 2021 +0200 net/smc: Allow SMC-D 1MB DMB allocations [ Upstream commit 67161779a9ea926fccee8de047ae66cbd3482b91 ] Commit a3fe3d01bd0d7 ("net/smc: introduce sg-logic for RMBs") introduced a restriction for RMB allocations as used by SMC-R. However, SMC-D does not use scatter-gather lists to back its DMBs, yet it was limited by this restriction, still. This patch exempts SMC, but limits allocations to the maximum RMB/DMB size respectively. Signed-off-by: Stefan Raspl Signed-off-by: Guvenc Gulce Signed-off-by: David S. Miller Stable-dep-of: 3ac14b9dfbd3 ("net/smc: set rmb's SG_MAX_SINGLE_ALLOC limitation only when CONFIG_ARCH_NO_SG_CHAIN is defined") Signed-off-by: Sasha Levin commit de9f06b37d148c5f6de89988f4e9dab21a124d64 Author: Samasth Norway Ananda Date: Thu May 9 16:10:37 2024 -0700 wifi: brcmsmac: LCN PHY code is used for BCM4313 2G-only device [ Upstream commit c636fa85feb450ca414a10010ed05361a73c93a6 ] The band_idx variable in the function wlc_lcnphy_tx_iqlo_cal() will never be set to 1 as BCM4313 is the only device for which the LCN PHY code is used. This is a 2G-only device. Fixes: 5b435de0d786 ("net: wireless: add brcm80211 drivers") Signed-off-by: Samasth Norway Ananda Acked-by: Arend van Spriel Signed-off-by: Kalle Valo Link: https://msgid.link/20240509231037.2014109-1-samasth.norway.ananda@oracle.com Signed-off-by: Sasha Levin commit 5510183266a76af4a3e49ae8d2aa58c11c0c476f Author: Marek Behún Date: Mon Jul 15 13:59:12 2024 +0200 firmware: turris-mox-rwtm: Initialize completion before mailbox [ Upstream commit 49e24c80d3c81c43e2a56101449e1eea32fcf292 ] Initialize the completion before the mailbox channel is requested. Fixes: 389711b37493 ("firmware: Add Turris Mox rWTM firmware driver") Signed-off-by: Marek Behún Reviewed-by: Andy Shevchenko Signed-off-by: Arnd Bergmann Signed-off-by: Sasha Levin commit 8ed886fbfbab7971bdb6bfe2ae50d40b0234852c Author: Marek Behún Date: Mon Jul 15 13:59:11 2024 +0200 firmware: turris-mox-rwtm: Fix checking return value of wait_for_completion_timeout() [ Upstream commit 8467cfe821ac3526f7598682ad5f90689fa8cc49 ] The wait_for_completion_timeout() function returns 0 if timed out, and a positive value if completed. Fix the usage of this function. Fixes: 389711b37493 ("firmware: Add Turris Mox rWTM firmware driver") Fixes: 2eab59cf0d20 ("firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng") Signed-off-by: Marek Behún Reviewed-by: Ilpo Järvinen Reviewed-by: Andy Shevchenko Signed-off-by: Arnd Bergmann Signed-off-by: Sasha Levin commit 65f083996e15f5fcb020c83d7a6cc22e7a7148d3 Author: Thorsten Blum Date: Tue Jul 2 05:41:17 2024 +0200 m68k: cmpxchg: Fix return value for default case in __arch_xchg() [ Upstream commit 21b9e722ad28c19c2bc83f18f540b3dbd89bf762 ] The return value of __invalid_xchg_size() is assigned to tmp instead of the return variable x. Assign it to x instead. Fixes: 2501cf768e4009a0 ("m68k: Fix xchg/cmpxchg to fail to link if given an inappropriate pointer") Signed-off-by: Thorsten Blum Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/20240702034116.140234-2-thorsten.blum@toblux.com Signed-off-by: Geert Uytterhoeven Signed-off-by: Sasha Levin commit 1b55044749ef8bcf0a5878746f60c9ba54f305f0 Author: Chen Ni Date: Tue Jul 2 11:10:10 2024 +0800 x86/xen: Convert comma to semicolon [ Upstream commit 349d271416c61f82b853336509b1d0dc04c1fcbb ] Replace a comma between expression statements by a semicolon. Fixes: 8310b77b48c5 ("Xen/gnttab: handle p2m update errors on a per-slot basis") Signed-off-by: Chen Ni Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/20240702031010.1411875-1-nichen@iscas.ac.cn Signed-off-by: Juergen Gross Signed-off-by: Sasha Levin commit c1588a2e51e5453f4763753485e7e302df6688a2 Author: Eero Tamminen Date: Mon Jun 24 17:49:01 2024 +0300 m68k: atari: Fix TT bootup freeze / unexpected (SCU) interrupt messages [ Upstream commit f70065a9fd988983b2c693631b801f25a615fc04 ] Avoid freeze on Atari TT / MegaSTe boot with continuous messages of: unexpected interrupt from 112 Which was due to VBL interrupt being enabled in SCU sys mask, but there being no handler for that any more. (Bug and fix were first verified on real Atari TT HW by Christian, this patch later on in Hatari emulator.) Fixes: 1fa0b29f3a43f9dd ("fbdev: Kill Atari vblank cursor blinking") Reported-by: Nicolas Pomarède Closes: https://listengine.tuxfamily.org/lists.tuxfamily.org/hatari-devel/2024/06/msg00016.html Closes: https://lore.kernel.org/all/9aa793d7-82ed-4fbd-bce5-60810d8a9119@helsinkinet.fi Tested-by: Christian Zietz Signed-off-by: Eero Tamminen Reviewed-by: Michael Schmitz Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/20240624144901.5236-1-oak@helsinkinet.fi Signed-off-by: Geert Uytterhoeven Signed-off-by: Sasha Levin commit 5bded5a131af34b77481791145ba91f0ee940496 Author: Jerome Brunet Date: Wed Jun 26 17:27:30 2024 +0200 arm64: dts: amlogic: gx: correct hdmi clocks [ Upstream commit 0602ba0dcd0e76067a0b7543e92b2de3fb231073 ] The clocks provided to HDMI tx are not consistent between gx and g12: * gx receives the peripheral clock as 'isfr' while g12 receives it as 'iahb' * g12 gets the HDMI system clock as 'isfr' but gx does not even get it. It surely needs that clock since the driver is directly poking around the clock controller's registers for that clock. Align gx SoCs with g12 and provide: * the HDMI peripheral clock as 'iahb' * the HDMI system clock as 'isfr' Fixes: 6939db7e0dbf ("ARM64: dts: meson-gx: Add support for HDMI output") Signed-off-by: Jerome Brunet Link: https://lore.kernel.org/r/20240626152733.1350376-2-jbrunet@baylibre.com Signed-off-by: Neil Armstrong Signed-off-by: Sasha Levin commit 5c6820c5a74128819a12f2563dd2f7fa7d3fa86b Author: Rafał Miłecki Date: Tue Jun 4 09:49:16 2024 +0200 arm64: dts: mediatek: mt7622: fix "emmc" pinctrl mux [ Upstream commit aebba1030a5766cdf894ed4ab0cac7aed5aee9c1 ] Value "emmc_rst" is a group name and should be part of the "groups" property. This fixes: arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: pinctrl@10211000: emmc-pins-default:mux:function: ['emmc', 'emmc_rst'] is too long from schema $id: http://devicetree.org/schemas/pinctrl/mediatek,mt7622-pinctrl.yaml# arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dtb: pinctrl@10211000: emmc-pins-default:mux:function: ['emmc', 'emmc_rst'] is too long from schema $id: http://devicetree.org/schemas/pinctrl/mediatek,mt7622-pinctrl.yaml# Fixes: 3725ba3f5574 ("arm64: dts: mt7622: add pinctrl related device nodes") Fixes: 0b6286dd96c0 ("arm64: dts: mt7622: add bananapi BPI-R64 board") Signed-off-by: Rafał Miłecki Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20240604074916.7929-1-zajec5@gmail.com Signed-off-by: AngeloGioacchino Del Regno Signed-off-by: Sasha Levin commit b42123aa11852e090f3024c6759b2d70515c2d43 Author: Michael Walle Date: Mon Jun 17 11:13:38 2024 +0200 ARM: dts: imx6qdl-kontron-samx6i: fix PCIe reset polarity [ Upstream commit df35c6e9027cf9affe699e632a48082ab1bbba4c ] The PCIe reset line is active low. Fix it. Fixes: 2a51f9dae13d ("ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module") Signed-off-by: Michael Walle Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin commit 2623585eb5915d088be7b2dc3963239fabe77bb9 Author: Michael Walle Date: Mon Jun 17 11:13:31 2024 +0200 ARM: dts: imx6qdl-kontron-samx6i: fix board reset [ Upstream commit b972d6b3b46345023aee56a95df8e2c137aa4ee4 ] On i.MX6 the board is reset by the watchdog. But in turn to do a complete board reset, we have to assert the WDOG_B output which is routed also to the CPLD which then do a complete power-cycle of the board. Fixes: 2125212785c9 ("ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support") Signed-off-by: Michael Walle Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin commit 748ee683ae54f8fb4daa2d4cd4a51813ea43cab3 Author: Michael Walle Date: Mon Jun 17 11:13:30 2024 +0200 ARM: dts: imx6qdl-kontron-samx6i: fix PHY reset [ Upstream commit edfea889a049abe80f0d55c0365bf60fbade272f ] The PHY reset line is connected to both the SoC (GPIO1_25) and the CPLD. We must not use the GPIO1_25 as it will drive against the output buffer of the CPLD. Instead there is another GPIO (GPIO2_01), an input to the CPLD, which will tell the CPLD to assert the PHY reset line. Fixes: 2a51f9dae13d ("ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module") Fixes: 5694eed98cca ("ARM: dts: imx6qdl-kontron-samx6i: move phy reset into phy-node") Signed-off-by: Michael Walle Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin commit a64cd46cc2f08ea572f9eff24ad289986b97b3b3 Author: Marco Felsch Date: Tue Jul 26 15:05:20 2022 +0200 ARM: dts: imx6qdl-kontron-samx6i: move phy reset into phy-node [ Upstream commit 5694eed98cca5c164ebb5b831b65b4c9eee4b2d5 ] Add ethernet-phy node so we can drop the deprecated fec phy-reset-gpios property. The reset-assert-us value is taken from the existing logic since the fec driver will add an 1ms assert delay per default if phy-reset-gpios is used and phy-reset-duration is not specified. Signed-off-by: Marco Felsch Signed-off-by: Shawn Guo Stable-dep-of: edfea889a049 ("ARM: dts: imx6qdl-kontron-samx6i: fix PHY reset") Signed-off-by: Sasha Levin commit 3ba50d9233bd1e26cd374cb4264df614b9b63cba Author: Jonas Karlman Date: Sat Jun 15 17:03:52 2024 +0000 arm64: dts: rockchip: Increase VOP clk rate on RK3328 [ Upstream commit 0f2ddb128fa20f8441d903285632f2c69e90fae1 ] The VOP on RK3328 needs to run at a higher rate in order to produce a proper 3840x2160 signal. Change to use 300MHz for VIO clk and 400MHz for VOP clk, same rates used by vendor 4.4 kernel. Fixes: 52e02d377a72 ("arm64: dts: rockchip: add core dtsi file for RK3328 SoCs") Signed-off-by: Jonas Karlman Link: https://lore.kernel.org/r/20240615170417.3134517-2-jonas@kwiboo.se Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin commit 3edf65be1fade800cce3eb22eb222b97aae458b5 Author: Dmitry Baryshkov Date: Mon Apr 8 03:04:31 2024 +0300 arm64: dts: qcom: msm8996: specify UFS core_clk frequencies [ Upstream commit 02f838b7f8cdfb7a96b7f08e7f6716f230bdecba ] Follow the example of other platforms and specify core_clk frequencies in the frequency table in addition to the core_clk_src frequencies. The driver should be setting the leaf frequency instead of some interim clock freq. Suggested-by: Nitin Rawat Fixes: 57fc67ef0d35 ("arm64: dts: qcom: msm8996: Add ufs related nodes") Reviewed-by: Konrad Dybcio Reviewed-by: Manivannan Sadhasivam Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20240408-msm8996-fix-ufs-v4-1-ee1a28bf8579@linaro.org Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin commit ad8c347732a450188140f230e247a209200e6b01 Author: Dmitry Baryshkov Date: Wed May 1 19:19:32 2024 +0300 arm64: dts: qcom: sdm845: add power-domain to UFS PHY [ Upstream commit fd39ae8b9bc10419b1e4b849cdbc6755a967ade1 ] The UFS PHY is powered on via the UFS_PHY_GDSC power domain. Add corresponding power-domain the the PHY node. Fixes: cc16687fbd74 ("arm64: dts: qcom: sdm845: add UFS controller") Signed-off-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20240501-qcom-phy-fixes-v1-6-f1fd15c33fb3@linaro.org Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin commit 5cd6721d789683a8fa5e96fcab388021fa4c2f7b Author: Guenter Roeck Date: Sat Jul 13 12:03:53 2024 -0700 hwmon: (max6697) Fix swapped temp{1,8} critical alarms [ Upstream commit 1ea3fd1eb9869fcdcbc9c68f9728bfc47b9503f1 ] The critical alarm bit for the local temperature sensor (temp1) is in bit 7 of register 0x45 (not bit 6), and the critical alarm bit for remote temperature sensor 7 (temp8) is in bit 6 (not bit 7). This only affects MAX6581 since all other chips supported by this driver do not support those critical alarms. Fixes: 5372d2d71c46 ("hwmon: Driver for Maxim MAX6697 and compatibles") Reviewed-by: Tzung-Bi Shih Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 9fe2069a9586e223d3c1bc2126833f310151616e Author: Guenter Roeck Date: Sat Jul 13 14:26:19 2024 -0700 hwmon: (max6697) Fix underflow when writing limit attributes [ Upstream commit cbf7467828cd4ec7ceac7a8b5b5ddb2f69f07b0e ] Using DIV_ROUND_CLOSEST() on an unbound value can result in underflows. Indeed, module test scripts report: temp1_max: Suspected underflow: [min=0, read 255000, written -9223372036854775808] temp1_crit: Suspected underflow: [min=0, read 255000, written -9223372036854775808] Fix by introducing an extra set of clamping. Fixes: 5372d2d71c46 ("hwmon: Driver for Maxim MAX6697 and compatibles") Reviewed-by: Tzung-Bi Shih Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 47f4d2600fdbe180de935b5017fba3cf3e2b585a Author: Uwe Kleine-König Date: Wed Jul 3 13:00:06 2024 +0200 pwm: stm32: Always do lazy disabling [ Upstream commit 7346e7a058a2c9aa9ff1cc699c7bf18a402d9f84 ] When the state changes from enabled to disabled, polarity, duty_cycle and period are not configured in hardware and TIM_CCER_CCxE is just cleared. However if the state changes from one disabled state to another, all parameters are written to hardware because the early exit from stm32_pwm_apply() is only taken if the pwm is currently enabled. This yields surprises like: Applying { .period = 1, .duty_cycle = 0, .enabled = false } succeeds if the pwm is initially on, but fails if it's already off because 1 is a too small period. Update the check for lazy disable to always exit early if the target state is disabled, no matter what is currently configured. Fixes: 7edf7369205b ("pwm: Add driver for STM32 plaftorm") Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20240703110010.672654-2-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König Signed-off-by: Sasha Levin commit 894e544ba55838fcf73ea1451c82be7fa1c9ced9 Author: Wayne Tung Date: Mon Jul 1 15:32:52 2024 +0800 hwmon: (adt7475) Fix default duty on fan is disabled [ Upstream commit 39b24cced70fdc336dbc0070f8b3bde61d8513a8 ] According to the comments on fan is disabled, we change to manual mode and set the duty cycle to 0. For setting the duty cycle part, the register is wrong. Fix it. Fixes: 1c301fc5394f ("hwmon: Add a driver for the ADT7475 hardware monitoring chip") Signed-off-by: Wayne Tung Link: https://lore.kernel.org/r/20240701073252.317397-1-chineweff@gmail.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 1df94156d9bb97c40ed201806d48b714cefb7081 Author: Ilpo Järvinen Date: Mon May 27 15:55:38 2024 +0300 x86/platform/iosf_mbi: Convert PCIBIOS_* return codes to errnos [ Upstream commit 7821fa101eab529521aa4b724bf708149d70820c ] iosf_mbi_pci_{read,write}_mdr() use pci_{read,write}_config_dword() that return PCIBIOS_* codes but functions also return -ENODEV which are not compatible error codes. As neither of the functions are related to PCI read/write functions, they should return normal errnos. Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal errno before returning it. Fixes: 46184415368a ("arch: x86: New MailBox support driver for Intel SOC's") Signed-off-by: Ilpo Järvinen Signed-off-by: Borislav Petkov (AMD) Link: https://lore.kernel.org/r/20240527125538.13620-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Sasha Levin commit 2ffb9d2d6f0d4ff5812d938aa5f58ec9b874d4d7 Author: Ilpo Järvinen Date: Mon May 27 15:55:37 2024 +0300 x86/pci/xen: Fix PCIBIOS_* return code handling [ Upstream commit e9d7b435dfaec58432f4106aaa632bf39f52ce9f ] xen_pcifront_enable_irq() uses pci_read_config_byte() that returns PCIBIOS_* codes. The error handling, however, assumes the codes are normal errnos because it checks for < 0. xen_pcifront_enable_irq() also returns the PCIBIOS_* code back to the caller but the function is used as the (*pcibios_enable_irq) function which should return normal errnos. Convert the error check to plain non-zero check which works for PCIBIOS_* return codes and convert the PCIBIOS_* return code using pcibios_err_to_errno() into normal errno before returning it. Fixes: 3f2a230caf21 ("xen: handled remapped IRQs when enabling a pcifront PCI device.") Signed-off-by: Ilpo Järvinen Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/20240527125538.13620-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Sasha Levin commit eb8baf546fdb5e80667d603265de2299defb5762 Author: Ilpo Järvinen Date: Mon May 27 15:55:36 2024 +0300 x86/pci/intel_mid_pci: Fix PCIBIOS_* return code handling [ Upstream commit 724852059e97c48557151b3aa4af424614819752 ] intel_mid_pci_irq_enable() uses pci_read_config_byte() that returns PCIBIOS_* codes. The error handling, however, assumes the codes are normal errnos because it checks for < 0. intel_mid_pci_irq_enable() also returns the PCIBIOS_* code back to the caller but the function is used as the (*pcibios_enable_irq) function which should return normal errnos. Convert the error check to plain non-zero check which works for PCIBIOS_* return codes and convert the PCIBIOS_* return code using pcibios_err_to_errno() into normal errno before returning it. Fixes: 5b395e2be6c4 ("x86/platform/intel-mid: Make IRQ allocation a bit more flexible") Signed-off-by: Ilpo Järvinen Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240527125538.13620-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Sasha Levin commit 55942933a2999f969fb8d39022e784966467c7d1 Author: Ilpo Järvinen Date: Mon May 27 15:55:35 2024 +0300 x86/of: Return consistent error type from x86_of_pci_irq_enable() [ Upstream commit ec0b4c4d45cf7cf9a6c9626a494a89cb1ae7c645 ] x86_of_pci_irq_enable() returns PCIBIOS_* code received from pci_read_config_byte() directly and also -EINVAL which are not compatible error types. x86_of_pci_irq_enable() is used as (*pcibios_enable_irq) function which should not return PCIBIOS_* codes. Convert the PCIBIOS_* return code from pci_read_config_byte() into normal errno using pcibios_err_to_errno(). Fixes: 96e0a0797eba ("x86: dtb: Add support for PCI devices backed by dtb nodes") Signed-off-by: Ilpo Järvinen Signed-off-by: Borislav Petkov (AMD) Link: https://lore.kernel.org/r/20240527125538.13620-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Sasha Levin commit 2103341aef9894da161dca46a060d2d03e3efb60 Author: Chao Yu Date: Fri Jun 7 22:23:04 2024 +0800 hfsplus: fix to avoid false alarm of circular locking [ Upstream commit be4edd1642ee205ed7bbf66edc0453b1be1fb8d7 ] Syzbot report potential ABBA deadlock as below: loop0: detected capacity change from 0 to 1024 ====================================================== WARNING: possible circular locking dependency detected 6.9.0-syzkaller-10323-g8f6a15f095a6 #0 Not tainted ------------------------------------------------------ syz-executor171/5344 is trying to acquire lock: ffff88807cb980b0 (&tree->tree_lock){+.+.}-{3:3}, at: hfsplus_file_truncate+0x811/0xb50 fs/hfsplus/extents.c:595 but task is already holding lock: ffff88807a930108 (&HFSPLUS_I(inode)->extents_lock){+.+.}-{3:3}, at: hfsplus_file_truncate+0x2da/0xb50 fs/hfsplus/extents.c:576 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&HFSPLUS_I(inode)->extents_lock){+.+.}-{3:3}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752 hfsplus_file_extend+0x21b/0x1b70 fs/hfsplus/extents.c:457 hfsplus_bmap_reserve+0x105/0x4e0 fs/hfsplus/btree.c:358 hfsplus_rename_cat+0x1d0/0x1050 fs/hfsplus/catalog.c:456 hfsplus_rename+0x12e/0x1c0 fs/hfsplus/dir.c:552 vfs_rename+0xbdb/0xf00 fs/namei.c:4887 do_renameat2+0xd94/0x13f0 fs/namei.c:5044 __do_sys_rename fs/namei.c:5091 [inline] __se_sys_rename fs/namei.c:5089 [inline] __x64_sys_rename+0x86/0xa0 fs/namei.c:5089 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (&tree->tree_lock){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18cb/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752 hfsplus_file_truncate+0x811/0xb50 fs/hfsplus/extents.c:595 hfsplus_setattr+0x1ce/0x280 fs/hfsplus/inode.c:265 notify_change+0xb9d/0xe70 fs/attr.c:497 do_truncate+0x220/0x310 fs/open.c:65 handle_truncate fs/namei.c:3308 [inline] do_open fs/namei.c:3654 [inline] path_openat+0x2a3d/0x3280 fs/namei.c:3807 do_filp_open+0x235/0x490 fs/namei.c:3834 do_sys_openat2+0x13e/0x1d0 fs/open.c:1406 do_sys_open fs/open.c:1421 [inline] __do_sys_creat fs/open.c:1497 [inline] __se_sys_creat fs/open.c:1491 [inline] __x64_sys_creat+0x123/0x170 fs/open.c:1491 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&HFSPLUS_I(inode)->extents_lock); lock(&tree->tree_lock); lock(&HFSPLUS_I(inode)->extents_lock); lock(&tree->tree_lock); This is a false alarm as tree_lock mutex are different, one is from sbi->cat_tree, and another is from sbi->ext_tree: Thread A Thread B - hfsplus_rename - hfsplus_rename_cat - hfs_find_init - mutext_lock(cat_tree->tree_lock) - hfsplus_setattr - hfsplus_file_truncate - mutex_lock(hip->extents_lock) - hfs_find_init - mutext_lock(ext_tree->tree_lock) - hfs_bmap_reserve - hfsplus_file_extend - mutex_lock(hip->extents_lock) So, let's call mutex_lock_nested for tree_lock mutex lock, and pass correct lock class for it. Fixes: 31651c607151 ("hfsplus: avoid deadlock on file truncation") Reported-by: syzbot+6030b3b1b9bf70e538c4@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-fsdevel/000000000000e37a4005ef129563@google.com Cc: Ernesto A. Fernández Signed-off-by: Chao Yu Link: https://lore.kernel.org/r/20240607142304.455441-1-chao@kernel.org Signed-off-by: Christian Brauner Signed-off-by: Sasha Levin commit e4f2b5e6c42e8ee735da8906e105e987f473ab5c Author: Tzung-Bi Shih Date: Tue Jun 11 11:31:10 2024 +0000 platform/chrome: cros_ec_debugfs: fix wrong EC message version [ Upstream commit c2a28647bbb4e0894e8824362410f72b06ac57a4 ] ec_read_version_supported() uses ec_params_get_cmd_versions_v1 but it wrongly uses message version 0. Fix it. Fixes: e86264595225 ("mfd: cros_ec: add debugfs, console log file") Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20240611113110.16955-1-tzungbi@kernel.org Signed-off-by: Tzung-Bi Shih Signed-off-by: Sasha Levin commit c68d1dbfe381260e8e30880fa6b8e708e57143f6 Author: Arnd Bergmann Date: Wed May 29 11:51:11 2024 +0200 EDAC, i10nm: make skx_common.o a separate module [ Upstream commit 123b158635505c89ed0d3ef45c5845ff9030a466 ] Commit 598afa050403 ("kbuild: warn objects shared among multiple modules") was added to track down cases where the same object is linked into multiple modules. This can cause serious problems if some modules are builtin while others are not. That test triggers this warning: scripts/Makefile.build:236: drivers/edac/Makefile: skx_common.o is added to multiple modules: i10nm_edac skx_edac Make this a separate module instead. [Tony: Added more background details to commit message] Fixes: d4dc89d069aa ("EDAC, i10nm: Add a driver for Intel 10nm server processors") Signed-off-by: Arnd Bergmann Signed-off-by: Tony Luck Link: https://lore.kernel.org/all/20240529095132.1929397-1-arnd@kernel.org/ Signed-off-by: Sasha Levin commit 5dad7906e7683143065054642b9234d784c125e9 Author: Qiuxu Zhuo Date: Fri Jun 11 10:01:18 2021 -0700 EDAC/skx_common: Add new ADXL components for 2-level memory [ Upstream commit 2f4348e5a86198704368a699a7c4cdeb21d569f5 ] Some Intel servers may configure memory in 2 levels, using fast "near" memory (e.g. DDR) as a cache for larger, slower, "far" memory (e.g. 3D X-point). In these configurations the BIOS ADXL address translation for an address in a 2-level memory range will provide details of both the "near" and far components. Current exported ADXL components are only for 1-level memory system or for 2nd level memory of 2-level memory system. So add new ADXL components for 1st level memory of 2-level memory system to fully support 2-level memory system and the detection of memory error source(1st level memory or 2nd level memory). Signed-off-by: Qiuxu Zhuo Signed-off-by: Tony Luck Link: https://lore.kernel.org/r/20210611170123.1057025-2-tony.luck@intel.com Stable-dep-of: 123b15863550 ("EDAC, i10nm: make skx_common.o a separate module") Signed-off-by: Sasha Levin commit 87594d6d0ee8b5f09668d29bbefe3b64bb4f32ac Author: Tony Luck Date: Thu Aug 15 14:53:28 2019 -0700 EDAC, skx: Retrieve and print retry_rd_err_log registers [ Upstream commit e80634a75aba90e7485cd1fdb463fcac5d45f14d ] Skylake logs some additional useful information in per-channel registers in addition the the architectural status/addr/misc logged in the machine check bank. Pick up this information and add it to the EDAC log: retry_rd_err_[five 32-bit register values] Sorry, no definitions for these registers. OEMs and DIMM vendors will be able to use them to isolate which cells in the DIMM are causing problems. correrrcnt[per rank corrected error counts] Note that if additional errors are logged while these registers are being read, you may see a jumble of values some from earlier errors, others from later errors (since the registers report the most recent logged error). The correrrcnt registers provide error counts per possible rank. If these counts only change by one since the previous error logged for this channel, then it is safe to assume that the registers logged provide a coherent view of one error. With this change EDAC logs look like this: EDAC MC4: 1 CE memory read error on CPU_SrcID#2_MC#0_Chan#1_DIMM#0 (channel:1 slot:0 page:0x8f26018 offset:0x0 grain:32 syndrome:0x0 - err_code:0x0101:0x0091 socket:2 imc:0 rank:0 bg:0 ba:0 row:0x1f880 col:0x200 retry_rd_err_log[0001a209 00000000 00000001 04800001 0001f880] correrrcnt[0001 0000 0000 0000 0000 0000 0000 0000]) Acked-by: Aristeu Rozanski Signed-off-by: Tony Luck Stable-dep-of: 123b15863550 ("EDAC, i10nm: make skx_common.o a separate module") Signed-off-by: Sasha Levin commit 202f9094955a4f86ddf64e988ec9ce1f1df5e9ad Author: Tony Luck Date: Thu Aug 15 14:18:59 2019 -0700 EDAC, skx_common: Refactor so that we initialize "dev" in result of adxl decode. [ Upstream commit 29b8e84fbc23cb2b70317b745641ea0569426872 ] Simplifies the code a little. Acked-by: Aristeu Rozanski Signed-off-by: Tony Luck Stable-dep-of: 123b15863550 ("EDAC, i10nm: make skx_common.o a separate module") Signed-off-by: Sasha Levin