<html><head><meta name="color-scheme" content="light dark"></head><body><pre style="word-wrap: break-word; white-space: pre-wrap;">% \iffalse
% $Id: gillcm.dtx,v 1.6 2010-07-30 20:40:55 boris Exp $
%
% Copyright (c) 2010, Boris Veytsman
%
% All rights reserved.
%
% Redistribution and use in source and binary forms, with or without
% modification, are permitted provided that the following conditions
% are met: 
%
%    * Redistributions of source code must retain the above copyright
%    notice, this list of conditions and the following disclaimer. 
%    * Redistributions in binary form must reproduce the above
%    copyright notice, this list of conditions and the following
%    disclaimer in the documentation and/or other materials provided
%    with the distribution. 
%    * Neither the name of the original author nor the names of the
%    contributors may be used to endorse or promote products derived
%    from this software without specific prior written permission. 
%
% THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
% CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
% INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
% MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
% DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
% BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
% EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
% TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
% DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
% ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
% OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
% OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
% POSSIBILITY OF SUCH DAMAGE.
%
% \fi 
% \CheckSum{138}
%
%
%% \CharacterTable
%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%%   Digits        \0\1\2\3\4\5\6\7\8\9
%%   Exclamation   \!     Double quote  \"     Hash (number) \#
%%   Dollar        \$     Percent       \%     Ampersand     \&amp;
%%   Acute accent  \'     Left paren    \(     Right paren   \)
%%   Asterisk      \*     Plus          \+     Comma         \,
%%   Minus         \-     Point         \.     Solidus       \/
%%   Colon         \:     Semicolon     \;     Less than     \&lt;
%%   Equals        \=     Greater than  \&gt;     Question mark \?
%%   Commercial at \@     Left bracket  \[     Backslash     \\
%%   Right bracket \]     Circumflex    \^     Underscore    \_
%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%%   Right brace   \}     Tilde         \~} 
%
%\iffalse
% Taken from xkeyval.dtx
%\fi
%\makeatletter
%\def\DescribeOption#1{\leavevmode\@bsphack
%              \marginpar{\raggedleft\PrintDescribeOption{#1}}%
%              \SpecialOptionIndex{#1}\@esphack\ignorespaces}
%\def\PrintDescribeOption#1{\strut\emph{option}\\\MacroFont #1\ }
%\def\SpecialOptionIndex#1{\@bsphack
%    \index{#1\actualchar{\protect\ttfamily#1}
%           (option)\encapchar usage}%
%    \index{options:\levelchar#1\actualchar{\protect\ttfamily#1}\encapchar
%           usage}\@esphack}
%\def\DescribeOptions#1{\leavevmode\@bsphack
%  \marginpar{\raggedleft\strut\emph{options}%
%  \@for\@tempa:=#1\do{%
%    \\\strut\MacroFont\@tempa\SpecialOptionIndex\@tempa
%  }}\@esphack\ignorespaces}
%\makeatother
%
%
% \MakeShortVerb{|}
% \GetFileInfo{gillcm.dtx}
% \title{Unslanted Italic Computer Modern Fonts Based on Eric Gill's Ideas}
% \author{Boris Veytsman\thanks{%
% \href{mailto:borisv@lk.net}{\texttt{borisv@lk.net}},
% \href{mailto:boris@varphi.com}{\texttt{boris@varphi.com}}}} 
% \date{\filedate, \fileversion}
% \maketitle
% \begin{abstract}
% This is a demonstration of the use of virtual fonts for unusual
% effects.  We employ virtual fonts to implement an old idea of Eric
% Gill.  This package was written for the author's talk
% at TUG'2010.
% \end{abstract}
% \tableofcontents
% \listoffigures
% \listoftables
% \clearpage
%
% \changes{v1.0}{2010/05/08}{First fully functional version} 
% \changes{v1.1}{2010/07/28}{Documentation update} 
%
%\section{Introduction}
%\label{sec:intro}
%
% This package is mostly a demonstration of the use of
% \textsf{Fontinst}~\cite{Jeffrey04:Fontinst} for mixing and changing
% fonts.  I wrote it as an appendix for my talk at TUG'2010.  Of
% course, as it happens with many teachers, I myself learned a lot
% while making this demo.
%
% The demo assumes some knowledge of \TeX{} and the way of writing
% |dtx| files~\cite{Clsguide}.
%
% Eric Gill said that unslanted italics should use Roman uppercase
% letters~\cite{Gill:Typography}:
% \begin{quote}
%   Properly speaking, there is no such thing as an alphabet of italic
%   capitals, and where upright or nearly upright italics are used
%   ordinary upright Roman capitals go perfectly well with them.
% \end{quote}
% 
% Let us create a font with italic lowercase and upright uppercase.
% Actually we create \emph{two} fonts: one based on ``normal'', i.e.
% slanted italics, and one based on unslanted ones (we call them
% |gishape| and |gushape|).  In both cases we start with Computer
% Modern Italics, and perform all changes using virtual fonts
% mechanism.
%
% Alan Hoenig in his book~\cite{Hoenig98:TeXUnbound} gives another
% example of a font based on Gill's idea.
%
%
% A couple words about the installation of the system.  You need the file
% \url{http://ctan.tug.org/install/fonts/psfonts/public/gillcm.tds.zip}/
% Unzip this file in \path{$TEXMF}.  Add |+cmg.map| to the
% configuration files of dvips, pdftex and your dvi previewer.  How
% exactly you do this depends on the \TeX{} distribution you use.   For \TeX Live you create a file
% \path{$TEXMF/updmap.d/50gcm.cfg} with just the line
% \begin{verbatim}
% Map gcm.map
% \end{verbatim}
% and then run |texhash| and |updmap|.  If you use Debian or Ubuntu,
% the system-wide |updmap.d| directory is located in |/etc|, and you
% need to create the file |gcm.list| in
% \path{/var/lib/tex-common/fontmap-cfg/} with the line
% \begin{verbatim}
% 50gcm
% \end{verbatim}
%
%
% If you use Mik\TeX2.6, run
% \begin{verbatim}
% initexmf --edit-config-file updmap  
% \end{verbatim}
% Add to the config file
% \begin{verbatim}
%  Map gcm.map
% \end{verbatim}
% save, exit and run |updmap|. 
% 
% If you use Mik\TeX2.5 or earlier, edit
% \path{localtexmf\web2c\updmap.cfg}, adding the line
% \begin{verbatim}
% Map gcm.map
% \end{verbatim}
% and run |updmap|.
%
% After this run updmap and texhash programs to update the
% configuration files and file names database.
%
% Refer to your distribution documentation for the further details.
%
%
%  
%
%\DescribeMacro{\gishape}
%\DescribeMacro{\gushape}
% To use the fonts in \LaTeX{} just add
% |\usepackage{gillcm}| to the preamble of your document. The style
% adds two new commands |\gishape| and |\gushape| that typeset
% ``Gillized'' italics and ``Gillized'' upright italics.
%
%
%
%
% \StopEventually{
%
% \section{Acknowledgements}
%
% Most of the things I know about virtual fonts I learned from the
% excellent book~\cite{Hoenig98:TeXUnbound} and the
% manual~\cite{fontinstallationguide}.   I am grateful to \TeX{} Users
% Group and Karl Berry for encouraging my interest in virtual fonts
% and to my consulting customers for their support of my font
% projects. 
%
%   \bibliography{gillcm}
%   \bibliographystyle{unsrt}}
%
%\section{Implementation}
%\label{sec:impl}
%
%\subsection{Identification}
%\label{sec:ident}
%
% 
% We start with the declaration who we are.  Most |.dtx| files put
% driver code in a separate driver file |.drv|.  We roll this code into the
% main file, and use the pseudo-guard |&lt;gobble&gt;| for it.  This means
% that the text between |&lt;*gobble&gt;| and |&lt;/gobble&gt;| will \emph{not}
% end in any derived file, but it will be used to typeset this manual.
%
% We also use the following guards:  |&lt;style&gt;| for \LaTeX{} style,
% |&lt;drv&gt;| for \textsf{Fontinst} driver |drv.tex|, |&lt;map&gt;| for
% \textsf{Fontinst} map generator |map.tex| and |&lt;mtx&gt;| for the font
% metrics file |delupper.mtx|.  More about these files below.  Note
% that |mtx| files do not allow \LaTeX{} command |\ProvidesFile|, so
% we do not put it there. 
%    \begin{macrocode}
%&lt;style&gt;\NeedsTeXFormat{LaTeX2e}
%&lt;*gobble&gt;
\ProvidesFile{gillcm.dtx}
%&lt;/gobble&gt;
%&lt;style&gt;\ProvidesClass{gillcm}
%&lt;drv&gt;\ProvidesFile{drv.tex}
%&lt;map&gt;\ProvidesFile{map.tex}
%&lt;*!mtx&gt;
[2010/07/28 v1.1 Computer Modern Italics with Gill extensions]
%&lt;/!mtx&gt;
%    \end{macrocode}
% And the driver code:
%    \begin{macrocode}
%&lt;*gobble&gt;
\documentclass{ltxdoc}
\usepackage{booktabs,amsmath}
\usepackage{url}
\usepackage[breaklinks,colorlinks,linkcolor=black,citecolor=black,
            pagecolor=black,urlcolor=black,hyperindex=false]{hyperref}
\PageIndex
\CodelineIndex
\RecordChanges
\EnableCrossrefs
\begin{document}
  \DocInput{gillcm.dtx}
\end{document}
%&lt;/gobble&gt; 
%    \end{macrocode}
%
% \subsection{Preparation of Computer Modern Fonts}
%
% We deal with Type~1 fonts, so we need Computer Modern Roman and
% Italic in the PFB formats.  They are provided, for example, by
% \textsf{cm-super} package.  We need the files listed in
% Table~\ref{tab:cm}.  We copy them into the working directory.  Since
% \textsf{Fontinst} prefers ASCII files, we extract metric information
% from them using |pf2afm| utility.
%
% The famous |make| program allows us to write down these operations
% succinctly as shown on Figure~\ref{fig:afm}.  Here the first
% paragraph lists our PFB files, the second one says that each PFB
% file corresponds to one AFM file, the third paragraph tells |make|
% to copy the PFB file from wherever they are (since |kpsewhich|) to
% the current directory, and the last paragraph instructs |make| to
% apply |pf2afm| to each PFB file.  Of course if you do not want to
% use |make|, you can perform all these operations manually.
%
% \begin{figure}
%   \centering
% \begin{verbatim}
% PFB =\
%       cmti10.pfb\
%       cmr10.pfb \
%       cmbxti10.pfb \
%       cmbx10.pfb
%
% AFM = ${PFB:%.pfb=%.afm}
%
% %.pfb:
%       cp `kpsewhich $@` .
%
% %.afm:  %.pfb
%       pf2afm $&lt;
% \end{verbatim}
%   \caption{Creating AFM Files Using \texttt{Makefile}}
%   \label{fig:afm}
% \end{figure}
%
%
% \begin{table}
%   \centering
%   \caption{Computer Modern Font Files}
%   \label{tab:cm}
%   \begin{tabular}{ll}
%     \toprule
%     File  &amp;  Font\\
%     \midrule
%     |cmti10.pfb| &amp; Computer Modern Italic\\
%     |cmr10.pfb| &amp; Computer Modern Roman \\
%     |cmbxti10.pfb| &amp; Computer Modern Bold Italic\\
%     |cmbx10.pfb| &amp; Computer Modern Bold\\
%     \bottomrule
%   \end{tabular}   
% \end{table}
%
%\subsection{Fontinst Driver}
%\label{sec:drv}
%
% In this section we construct the file |drv.tex| which does most of
% the work.
%
%
% First, we read the \textsf{Fontinst} program |fontinst.sty|:
%    \begin{macrocode}
%&lt;*drv&gt;
\input fontinst.sty
%    \end{macrocode}
% 
%
% We want to ``unslant'' the fonts.  This can be imagined as negative
% slanting.  The characteristic angle of Computer Modern Italics is
% $167/1000$ (technically, this is the tangent of the angle, so the
% angle itself is $\tan^{-1}(0.167) = 9^{\circ}28'51''$), so we use
% $-167/1000$ as our characteristic angle:
%    \begin{macrocode}
\setint{slant}{-167}
%    \end{macrocode}
% 
% Now it is time to uncover a white lie in Table~\ref{tab:cm}: the
% ``bold'' fonts listed there are actually bold extended fonts: they
% are slightly widened in the horizontal direction.  By tradition we
% call them nevertheless bold.  The next line facilitates this white
% lie: it instructs \textsf{Fontinst} to silently substitute bold
% extended fonts whenever a user request bold fonts.
%    \begin{macrocode}
\substitutesilent{bx}{b}
%    \end{macrocode}
%
%
% 
% \textsf{Fontinst} is designed to create virtual font files for \TeX.
% However, it also can be used to automatically create ``font maps'':
% special files read by |dvips| or |pdftex| to map PFB files into the
% virtual fonts.  To do this we need to \emph{record transformations}
% of Type~1 fonts for the map creation program.  Fortunately,
% \textsf{Fontinst} can do this for us too.  The following command
% starts this recording:
%    \begin{macrocode}
\recordtransforms{rec.tex}
%    \end{macrocode}
% The command  |\endrecordtransforms| below dumps these recordings
% into the file |rec.tex|.  The resulting file is shown on
% Figure~\ref{fig:rec}. 
%
% \begin{figure}
%   \centering
% \begin{verbatim}
% \storemapdata{cmr10}{\fromafm{cmr10}{CMR10}}{}
% \storemapdata{cmgm8r}{\frommtx{cmr10}}{\reencodefont{8r}}
% \storemapdata{cmti10}{\fromafm{cmti10}{CMTI10}}{}
% \storemapdata{cmgmi8r}{\frommtx{cmti10}}{\reencodefont{8r}}
% \storemapdata{cmti10}{\fromafm{cmti10}{CMTI10}}{}
% \storemapdata{cmgmiu8r}{\frommtx{cmti10}}{\reencodefont{8r}\transformfont{1000}{-167}}
% \storemapdata{cmbx10}{\fromafm{cmbx10}{CMBX10}}{}
% \storemapdata{cmgb8r}{\frommtx{cmbx10}}{\reencodefont{8r}}
% \storemapdata{cmbxti10}{\fromafm{cmbxti10}{CMBXTI10}}{}
% \storemapdata{cmgbi8r}{\frommtx{cmbxti10}}{\reencodefont{8r}}
% \storemapdata{cmbxti10}{\fromafm{cmbxti10}{CMBXTI10}}{}
% \storemapdata{cmgbiu8r}{\frommtx{cmbxti10}}{\reencodefont{8r}\transformfont{1000}{-167}}
% \makemapentry{cmgmi8r}
% \makemapentry{cmgm8r}
% \makemapentry{cmgbi8r}
% \makemapentry{cmgb8r}
% \makemapentry{cmgmiu8r}
% \makemapentry{cmgm8r}
% \makemapentry{cmgbiu8r}
% \makemapentry{cmgb8r}
% \makemapentry{cmgmi8r}
% \makemapentry{cmgm8r}
% \makemapentry{cmgbi8r}
% \makemapentry{cmgb8r}
% \makemapentry{cmgmiu8r}
% \makemapentry{cmgm8r}
% \makemapentry{cmgbiu8r}
% \makemapentry{cmgb8r}
% \makemapentry{cmgmi8r}
% \makemapentry{cmgm8r}
% \makemapentry{cmgbi8r}
% \makemapentry{cmgb8r}
% \makemapentry{cmgmiu8r}
% \makemapentry{cmgm8r}
% \makemapentry{cmgbiu8r}
% \makemapentry{cmgb8r}
% \end{verbatim}  
%   \caption{File \texttt{rec.tex} (created automatically)}
%   \label{fig:rec}
% \end{figure}
% 
%
% Now we can create the fonts to play with.  We will follow Karl
% Berry's scheme~\cite{fontname} for naming them.  The font family
% will be called |cmg| (Computer Modern Gillized).  The next letters
% are |m| for medium, |mi| for medium italic, |miu| for medium
% italic unslanted, and |b|, |bi|, |biu| for the corresponding bold
% variants.  The last symbols correspond to font encoding.
%
% We start with the fonts in the |8r| (\TeX{} Base 1) encoding.  
% 
% First, let us create a medium Roman font.  We take Computer Modern
% Roman file |cmr10.afm| and reencode it.  The main command is
% |\trnasformfont|.  Its first argument (|cmgm8r|) is the resulting
% font (remember, the family is |cmg|, the weight is |m| and the
% encoding is |8r|). Its second argument is the source. This argument
% says that we take |cmr10.afm| (|\fromafm| command) and reencode it
% to the required encoding (|\reencodefont|):
%    \begin{macrocode}
\transformfont{cmgm8r}{\reencodefont{8r}{\fromafm{cmr10}}}
%    \end{macrocode}
% 
% In the same way we create medium italic font |cmgmi8r| from the file
% |cmti10.afm|:
%    \begin{macrocode}
\transformfont{cmgmi8r}{\reencodefont{8r}{\fromafm{cmti10}}}
%    \end{macrocode}
% 
% The italic unslanted font |cmgmiu8r| is different: not only we
% reencode the source, we also unslant it, or, rather, slant it using
% the negative angle |\int{slant}| defined above.  This is done by the
% command |\slantfont|:
%    \begin{macrocode}
\transformfont{cmgmiu8r}{\slantfont{\int{slant}}%
  \reencodefont{8r}{\fromafm{cmti10}}}
%    \end{macrocode}
%
% In the similar manner we create three bold fonts: Roman, italic and
% italic unslanted: 
%    \begin{macrocode}
\transformfont{cmgb8r}{\reencodefont{8r}{\fromafm{cmbx10}}}
\transformfont{cmgbi8r}{\reencodefont{8r}{\fromafm{cmbxti10}}}
\transformfont{cmgbiu8r}{\slantfont{\int{slant}}%
  \reencodefont{8r}{\fromafm{cmbxti10}}}
%    \end{macrocode}
%
% 
% Fonts in \TeX{} Base 1 encoding are useful for manipulation, but
% they are not directly usable in \TeX{} or \LaTeX{} documents.  In
% this package we create fonts in the traditional \TeX{} encoding
% (|OT1|) and Cork encoding (|T1|).  \textsf{Fontinst} can create for
% us both virtual font files and \LaTeX{} font description files
% (|.fd|).  This is (rather unfortunately) called font installation.
% All font installation commands must be bracketed between
% |\installfonts| and |\endinstallfonts| directives. so we start with
% the first one:
%    \begin{macrocode}
\installfonts
%    \end{macrocode}
% 
% Then we declare the family and encoding we are going to install.
% Let us start with |OT1|.  Do not worry about the third (empty)
% argument of the |\installfamily| command.
%    \begin{macrocode}
\installfamily{OT1}{cmg}{}
%    \end{macrocode}
% 
% Now the real work begins.  Let us construct ``Gillized'' Computer
% Modern Italic font.  According to our scheme it will be called
% |cmgmi7t|.  This name is the first argument of |\installfont|
% command.  
%
% The second argument is the set of MTX files; one can view it as
% instructions to \textsf{Fontinst} describing \emph{how} to construct
% the file.  We start from the file |cmgmi8r|, created on the previous
% step.  It is just Computer Modern Italic.  The next instruction is
% |delupper|.  It refers to the file |delupper.mtx|, which we create
% below (Section~\ref{sec:delupper}).  For now it is enough to say
% that this file deletes from the font all uppercase letters.  If we
% would stop here, the resulting font would have empty spaces instead
% of letters A, B, \dots{} However, we do not stop and add another
% instruction, |cmgm8r|.  Let us recall that |cmgm8r| is Computer
% Modern Roman.  Therefore \textsf{Fontinst} will take the characters
% from this font and add it to the font created so far.  Which
% characters will be added?  The lowercase characters a, b, \dots{}
% are already filled up (\textsf{Fontinst} does not fill the slots
% already taken), so only empty spaces will be taken from the Roman
% font---i.e. the spaces that our |delupper.mtx| emptied.  We get a
% combined font!  The last instruction, |latin| tells
% \textsf{Fontinst} how to construct the characters that are absent
% from the fonts (like the euro sign).  It is always prudent to
% include it as the last resort.
%
% The next argument of the |\installfont| command is the encoding of
% the result (actually, it can include a list of the so called ETX
% files).
%
% The last four arguments are used to construct \LaTeX{} font
% definition files.  They say that \LaTeX{} should consider the
% resulting file to have encoding |OT1|, belong to the family |cmg|,
% have medium weight (|m|) and ``Gill Italic'' shape (|gi|).  Again,
% do not mind the last (empty) argument.
%
% So the command looks like the following:
%    \begin{macrocode}
\installfont{cmgmi7t}{cmgmi8r,delupper,cmgm8r,latin}{ot1}{OT1}{cmg}{m}{gi}{}
%    \end{macrocode}
% 
% We repeat this with bold weight:
%    \begin{macrocode}
\installfont{cmgbi7t}{cmgbi8r,delupper,cmgb8r,latin}{ot1}{OT1}{cmg}{bx}{gi}{}
%    \end{macrocode}
% 
% Unslanted italics are made in the same way, using |cmgmiu8r| and
% |cmgbiu8r| as the source:
%    \begin{macrocode}
\installfont{cmgmiu7t}{cmgmiu8r,delupper,cmgm8r,latin}{ot1}{OT1}{cmg}{m}{gu}{}
\installfont{cmgbiu7t}{cmgbiu8r,delupper,cmgb8r,latin}{ot1}{OT1}{cmg}{bx}{gu}{}
%    \end{macrocode}
% 
% We repeat this with |T1| encoding.  Note that for |T1| the
% ``instructions of the last resort'' are in the file |newlatin.mtx|:
%    \begin{macrocode}
\installfamily{T1}{cmg}{}
\installfont{cmgmi8t}{cmgmi8r,delupper,cmgm8r,newlatin}{t1}{T1}{cmg}{m}{gi}{}
\installfont{cmgbi8t}{cmgbi8r,delupper,cmgb8r,newlatin}{t1}{T1}{cmg}{bx}{gi}{}
\installfont{cmgmiu8t}{cmgmiu8r,delupper,cmgm8r,newlatin}{t1}{T1}{cmg}{m}{gu}{}
\installfont{cmgbiu8t}{cmgbiu8r,delupper,cmgb8r,newlatin}{t1}{T1}{cmg}{bx}{gu}{}
%    \end{macrocode}
% 
% Fonts in |T1| encoding should be accompanied by fonts in the ``text
% companion'' encoding |TS1|.  They include special symbols and
% accents:
%    \begin{macrocode}
\installfamily{TS1}{cmg}{}
\installfont{cmgmi8c}{cmgmi8r,delupper,cmgm8r,textcomp}{ts1}{TS1}{cmg}{m}{gi}{}
\installfont{cmgbi8c}{cmgbi8r,delupper,cmgb8r,textcomp}{ts1}{TS1}{cmg}{bx}{gi}{}
\installfont{cmgmiu8c}{cmgmiu8r,delupper,cmgm8r,textcomp}{ts1}{TS1}{cmg}{m}{gu}{}
\installfont{cmgbiu8c}{cmgbiu8r,delupper,cmgb8r,textcomp}{ts1}{TS1}{cmg}{bx}{gu}{}
%    \end{macrocode}
% 
% This finishes our file.  Let us just close the open groups:
%    \begin{macrocode}
\endinstallfonts
\endrecordtransforms
\bye
%&lt;/drv&gt;
%    \end{macrocode}
% 
%
%\subsection{Fontmap Generation}
%\label{sec:fontmap}
%
% The file |map.tex| is used to create font map file.  In this section
% we create it.
%
% First, we read the corresponding \textsf{Fontinst} file:
%    \begin{macrocode}
%&lt;*map&gt;
\input finstmsc.sty
%    \end{macrocode}
% 
% Next, we tell \textsf{Fontinst} that our Postscript files have the
% extension |.pfb| and that the resulting map should be called |cmg.map|:
%    \begin{macrocode}
\resetstr{PSfontsuffix}{.pfb}
\adddriver{dvips}{cmg.map}
%    \end{macrocode}
% 
% Then we read the file |rec.tex| which is generated by the run of
% |drv.tex| (Figure~\ref{fig:rec}):
%    \begin{macrocode}
\input rec.tex
%    \end{macrocode}
% 
% And that is all:
%    \begin{macrocode}
\donedrivers
\bye
%&lt;/map&gt;
%    \end{macrocode}
%
%
%\subsection{Deleting Uppercase Glyphs}
%\label{sec:delupper}
%
%
% Our |\installfont| instructions include deleting all uppercase
% letters from the italic fonts.  This is done by the file
% |delupper.mtx|, which we describe here.
%
%
% Everything between |\relax| and |\metrix| is just a comment:
%    \begin{macrocode}
%&lt;*mtx&gt;
\relax
Unset all uppercase letters and punctuation
\metrics
%    \end{macrocode}
% 
% The file itself uses the command |\unsetglyph|.  We unset the
% uppercase letters, parenthesizes, etc.
%    \begin{macrocode}
\unsetglyph{A}
\unsetglyph{B}
\unsetglyph{C}
\unsetglyph{D}
\unsetglyph{E}
\unsetglyph{F}
\unsetglyph{G}
\unsetglyph{H}
\unsetglyph{I}
\unsetglyph{J}
\unsetglyph{K}
\unsetglyph{L}
\unsetglyph{M}
\unsetglyph{N}
\unsetglyph{O}
\unsetglyph{P}
\unsetglyph{Q}
\unsetglyph{R}
\unsetglyph{S}
\unsetglyph{T}
\unsetglyph{U}
\unsetglyph{V}
\unsetglyph{W}
\unsetglyph{X}
\unsetglyph{Y}
\unsetglyph{Z}
\unsetglyph{AE}
\unsetglyph{OE}
\unsetglyph{Oslash}
\unsetglyph{exclam}
\unsetglyph{parenleft}
\unsetglyph{parenright}
\unsetglyph{comma}
\unsetglyph{period}
\unsetglyph{slash}
\unsetglyph{zero}
\unsetglyph{one}
\unsetglyph{two}
\unsetglyph{three}
\unsetglyph{four}
\unsetglyph{five}
\unsetglyph{six}
\unsetglyph{seven}
\unsetglyph{eight}
\unsetglyph{nine}
\unsetglyph{colon}
\unsetglyph{semicolon}
\unsetglyph{exclamdown}
\unsetglyph{questiondown}
\unsetglyph{question}
\unsetglyph{bracketleft}
\unsetglyph{bracketright}
\endmetrics
%&lt;/mtx&gt;
%    \end{macrocode}
%
%
%\subsection{Creation of Fonts}
%\label{sec:creation}
%
% Now we are ready to create fonts.  We need to run
% \begin{verbatim}
% latex drv.tex
% latex map.tex
% \end{verbatim}
% This will create a lot of |.pl| and |.vpl| files.  They should be
% converted into binary format using utilities |pltotf| and |vptovf|.
% On Figure~\ref{fig:tfm} we show how to do all these tasks using
% |make|.  Of course, we can run all these commands manually.
%
% \begin{figure}
%   \centering
% \begin{verbatim}
% %.map:  drv.tex map.tex $(AFM)
%       pdflatex drv.tex
%       pdflatex map.tex
%       for x in *.pl; do pltotf $$x; done
%       for x in *.vpl; do vptovf $$x; done
% \end{verbatim}
%   \caption{Creating TFM and VF Files using \texttt{Makefile}}
%   \label{fig:tfm}
% \end{figure}
%
%\subsection{Style File}
%\label{sec:style}
%
% To use the fonts in \LaTeX{} let us define commands |\gishape| and
% |\gushape| that select Gill Italic and Gill Unslanted Italic
% correspondingly.  Note that they should work only in text mode;
% math mode should use ``normal'' italics.  Here we are:
%    \begin{macrocode}
%&lt;*style&gt;
\DeclareRobustCommand\gishape
        {\not@math@alphabet\itshape\mathit
         \fontshape{gi}\fontfamily{cmg}\selectfont}
\DeclareRobustCommand\gushape
        {\not@math@alphabet\itshape\mathit
         \fontshape{gu}\fontfamily{cmg}\selectfont}
%&lt;/style&gt;
%    \end{macrocode}
%
%
%\subsection{Creation of Installation Archive}
%\label{sec:tds}
%
% The last step is to put all the files in the structure suitable for
% the modern \TeX{} installations (the so called TDS structure).  We
% will create the archive |gillcm.tds.zip| with the relevant files.
% The archive is packed into the |gillcm.tgz| file ready to be shipped
% to CTAN.  Of course, we do not want to ship Computer Modern fonts,
% so we delete them from the directory first.
%
% The corresponding fragment of |Makefile| is shown on
% Figure~\ref{fig:archive}. 
%
% \begin{figure}
%   \centering
% \begin{verbatim}
% archive: all clean
%        $(RM) cmr*.tfm cmt*.tfm cmb*.tfm
%        $(RM) cmr*.afm cmt*.afm cmb*.afm
%        $(RM) cmr*.vf cmt*.vf cmb*.vf
%        mkdir -p fonts/tfm/$(FOUNDRY)/$(PACKAGE)
%        cp *.tfm fonts/tfm/$(FOUNDRY)/$(PACKAGE)
%        mkdir -p fonts/vf/$(FOUNDRY)/$(PACKAGE)
%        cp *.vf fonts/vf/$(FOUNDRY)/$(PACKAGE)
%        mkdir -p fonts/map/dvips/$(PACKAGE)
%        cp *.map fonts/map/dvips/$(PACKAGE)
%        mkdir -p tex/latex/$(PACKAGE)
%        cp *.fd *.sty tex/latex/$(PACKAGE)
%        mkdir -p doc/latex/$(PACKAGE)
%        cp README *.pdf *.tex *.bib *.dtx *.ins doc/latex/$(PACKAGE)
%        zip -r $(PACKAGE).tds.zip fonts tex doc
%        tar -czvf $(PACKAGE).tgz \
%                README $(PACKAGE).tds.zip *.tex *.pdf *.bib *.dtx *.ins
% \end{verbatim}
%   \caption{Creation of Installation File for CTAN}
%   \label{fig:archive}
% \end{figure}
%
%
% This finishes our task!
%
%\Finale
%\clearpage
%
%\PrintChanges
%\clearpage
%\PrintIndex
%
\endinput
</pre></body></html>