How to Install an Application in an lx Branded Zone

Applications are installed as they are on a Linux system, by mounting the CD and running the installation program. This section covers a typical application installation in an lx branded zone.

Tip - If you know you will be using CDs or DVDs to install applications in an lx branded zone, add read-only access to CD or DVD media in the global zone when you initially configure the branded zone. See step 7 in How to Install MATLAB 7.2 Using CDs.

About MATLAB

MATLAB is a high-level language and interactive environment that enables you to perform computationally intensive tasks quickly. The product was developed by The MathWorks. See http://www.mathworks.com for more information.

How to Install MATLAB 7.2 Using CDs

1. Obtain the MATLAB 7.2 CDs .

   There are three CDs in the MATLAB/Simulink package. Only discs 1 and 3 are needed for a simple MATLAB installation.

2. Create and install an lx branded zone as described in How to Configure, Verify, and Commit the lx Branded Zone and Installing and Booting lx Branded Zones.
3. If the Volume Management file system is not running in the global zone, start it.

   global# svcadm volfs enable

4. Insert the media.
5. Check for media in the drive.

   global# volcheck

6. Test whether the CD is automounted.

   global# ls /cdrom

   You will see a display similar to the following:

   cdrom   cdrom1   mathworks_2006a1

7. Loopback mount the file system with the options ro,nodevices (read-only and no devices) in the non-global zone.

   global# zonecfg -z lx-zone
   zonecfg:lx-zone> add fs
   zonecfg:lx-zone:fs> set dir=/cdrom
   zonecfg:lx-zone:fs> set special=/cdrom
   zonecfg:lx-zone:fs> set type=lofs
   zonecfg:lx-zone:fs> add options [ro,nodevices]
   zonecfg:lx-zone:fs> end
   zonecfg:lx-zone> commit
   zonecfg:lx-zone> exit

8. Reboot the non-global zone.

   global# zoneadm -z lx-zone reboot

9. Use the zoneadm list command with the -v option to verify the status.

   global# zoneadm list -v

   You will see a display that is similar to the following:

   ID  NAME     STATUS       PATH                           BRAND      IP
    0  global   running      /                              native     shared
    1  lx-zone  running      /export/home/lx-zone           lx         shared

10. Log in to the lx zone.

    global# zlogin lx-zone

11. Verify the CD-ROM mount.

    lx-zone# ls /cdrom

    You will see a display similar to this:

    cdrom   cdrom1   mathworks_2006a1

12. Create the license file as described in the MATLAB documentation.
13. Install the product as described in the product installation guide.

    lx-zone# /mnt/install

14. Exit the zone.

    lx-zone# exit

    ---

    Tip - You might want to retain the /cdrom file system in your non-global zone. The mount will always reflect the current contents of the CD-ROM drive, or an empty directory if the drive is empty.

    ---

15. (Optional) If you want to remove the /cdrom file system from the non-global zone, use the following procedure.

    global# zonecfg -z lx-zone
    zonecfg:lx-zone> remove fs dir=/cdrom
    zonecfg:lx-zone> commit
    zonecfg:lx-zone> exit

How to Install MATLAB 7.2 Using ISO Images

Before You Begin

Note that this method consumes considerable disk space.

1. Obtain the MATLAB 7.2 CDs .

   There are three CDs in the MATLAB/Simulink package. Only discs 1 and 3 are needed for a simple MATLAB installation.

2. Create and install an lx branded zone as described in How to Configure, Verify, and Commit the lx Branded Zone and Installing and Booting lx Branded Zones.
3. Copy the data from each CD to a .iso file.

   global# /usr/bin/dd if=/dev/rdsk/c1d0s2 of=disk1.iso

   This copies the data from the first CD to the file disk1.iso. Repeat, using a different file name such as disk3.iso, for the third CD.

4. From the global zone, lofi-mount the first .iso file in the lx zone.

   global# lofiadm -a /zpool/local/disk1.iso
   global# mount -F hsfs /dev/lofi/1 /zones/lx-zone/root/mnt

5. Log in to the lx zone.

   global# zlogin lx-zone

6. Use X forwarding to redirect the display to your desktop:

   lx-zone# ssh -X root@lx-zone

7. Create the license file as described in the MATLAB documentation.
8. Install the product as described in the product installation guide.

   lx-zone# /mnt/install

9. When prompted to insert CD 3, go back to the global zone terminal window and mount disk3.isofile in place of the first.

   global# umount /zones/lx-zone/root/mnt
       global# lofiadm -d /dev/lofi/1
       global# lofiadm -a /zpool/local/disk3.iso
       global# mount -F hsfs /dev/lofi/1 /zones/lx-zone/root/mnt

   The installation will finish.