commit 6b8cbbd5977d7d7a2d6a466b46875b18a98b53d0 Author: Greg Kroah-Hartman Date: Fri Nov 8 16:20:54 2024 +0100 Linux 5.4.285 Link: https://lore.kernel.org/r/20241106120331.497003148@linuxfoundation.org Tested-by: Shuah Khan Link: https://lore.kernel.org/r/20241107063341.146657755@linuxfoundation.org Tested-by: Jon Hunter Tested-by: Florian Fainelli Tested-by: kernelci.org bot Signed-off-by: Greg Kroah-Hartman commit 8ebee7565effdeae6085458f8f8463363120a871 Author: Qun-Wei Lin Date: Fri Oct 25 16:58:11 2024 +0800 mm: krealloc: Fix MTE false alarm in __do_krealloc commit 704573851b51808b45dae2d62059d1d8189138a2 upstream. This patch addresses an issue introduced by commit 1a83a716ec233 ("mm: krealloc: consider spare memory for __GFP_ZERO") which causes MTE (Memory Tagging Extension) to falsely report a slab-out-of-bounds error. The problem occurs when zeroing out spare memory in __do_krealloc. The original code only considered software-based KASAN and did not account for MTE. It does not reset the KASAN tag before calling memset, leading to a mismatch between the pointer tag and the memory tag, resulting in a false positive. Example of the error: ================================================================== swapper/0: BUG: KASAN: slab-out-of-bounds in __memset+0x84/0x188 swapper/0: Write at addr f4ffff8005f0fdf0 by task swapper/0/1 swapper/0: Pointer tag: [f4], memory tag: [fe] swapper/0: swapper/0: CPU: 4 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12. swapper/0: Hardware name: MT6991(ENG) (DT) swapper/0: Call trace: swapper/0: dump_backtrace+0xfc/0x17c swapper/0: show_stack+0x18/0x28 swapper/0: dump_stack_lvl+0x40/0xa0 swapper/0: print_report+0x1b8/0x71c swapper/0: kasan_report+0xec/0x14c swapper/0: __do_kernel_fault+0x60/0x29c swapper/0: do_bad_area+0x30/0xdc swapper/0: do_tag_check_fault+0x20/0x34 swapper/0: do_mem_abort+0x58/0x104 swapper/0: el1_abort+0x3c/0x5c swapper/0: el1h_64_sync_handler+0x80/0xcc swapper/0: el1h_64_sync+0x68/0x6c swapper/0: __memset+0x84/0x188 swapper/0: btf_populate_kfunc_set+0x280/0x3d8 swapper/0: __register_btf_kfunc_id_set+0x43c/0x468 swapper/0: register_btf_kfunc_id_set+0x48/0x60 swapper/0: register_nf_nat_bpf+0x1c/0x40 swapper/0: nf_nat_init+0xc0/0x128 swapper/0: do_one_initcall+0x184/0x464 swapper/0: do_initcall_level+0xdc/0x1b0 swapper/0: do_initcalls+0x70/0xc0 swapper/0: do_basic_setup+0x1c/0x28 swapper/0: kernel_init_freeable+0x144/0x1b8 swapper/0: kernel_init+0x20/0x1a8 swapper/0: ret_from_fork+0x10/0x20 ================================================================== Fixes: 1a83a716ec233 ("mm: krealloc: consider spare memory for __GFP_ZERO") Signed-off-by: Qun-Wei Lin Acked-by: David Rientjes Signed-off-by: Vlastimil Babka Signed-off-by: Greg Kroah-Hartman commit c6ab967946b1df99cb3170e0c66627d26628cbdc Author: Johannes Berg Date: Sat Mar 12 22:19:58 2022 +0100 mac80211: always have ieee80211_sta_restart() commit 3fa5a0f5b0d69e31c6476cd81afeca3cc25a4927 upstream. When CONFIG_PM isn't defined we don't have the function ieee80211_sta_restart() compiled in, but we always need it now for firmware restart. Move it out of the ifdef. Fixes: 7d352ccf1e99 ("mac80211: Add support to trigger sta disconnect on hardware restart") Link: https://lore.kernel.org/r/20220312221957.1fa96c72db51.I8ecaa5f9402fede0272161e0531ab930b97fba3e@changeid Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit dc794e878e6d79f75205be456b1042a289c5759d Author: Jeongjun Park Date: Fri Oct 11 02:46:19 2024 +0900 vt: prevent kernel-infoleak in con_font_get() commit f956052e00de211b5c9ebaa1958366c23f82ee9e upstream. font.data may not initialize all memory spaces depending on the implementation of vc->vc_sw->con_font_get. This may cause info-leak, so to prevent this, it is safest to modify it to initialize the allocated memory space to 0, and it generally does not affect the overall performance of the system. Cc: stable@vger.kernel.org Reported-by: syzbot+955da2d57931604ee691@syzkaller.appspotmail.com Fixes: 05e2600cb0a4 ("VT: Bump font size limitation to 64x128 pixels") Signed-off-by: Jeongjun Park Link: https://lore.kernel.org/r/20241010174619.59662-1-aha310510@gmail.com Signed-off-by: Greg Kroah-Hartman commit 7e948e456d0d6ade88cae198ad5ea1e1e01463ec Author: Jason-JH.Lin Date: Tue Oct 29 09:24:53 2024 +0800 Revert "drm/mipi-dsi: Set the fwnode for mipi_dsi_device" This reverts commit 22b8ac608af5b8a859ed9dc0b15f31dea26cdbb0 which is commit a26cc2934331b57b5a7164bff344f0a2ec245fc0 upstream. Reason for revert: 1. The commit [1] does not land on linux-5.15, so this patch does not fix anything. 2. Since the fw_devlink improvements series [2] does not land on linux-5.15, using device_set_fwnode() causes the panel to flash during bootup. Incorrect link management may lead to incorrect device initialization, affecting firmware node links and consumer relationships. The fwnode setting of panel to the DSI device would cause a DSI initialization error without series[2], so this patch was reverted to avoid using the incomplete fw_devlink functionality. [1] commit 3fb16866b51d ("driver core: fw_devlink: Make cycle detection more robust") [2] Link: https://lore.kernel.org/all/20230207014207.1678715-1-saravanak@google.com Cc: stable@vger.kernel.org # 5.15.169 Cc: stable@vger.kernel.org # 5.10.228 Cc: stable@vger.kernel.org # 5.4.284 Signed-off-by: Jason-JH.Lin Signed-off-by: Greg Kroah-Hartman commit 7cc30ada84323be19395094d567579536e0d187e Author: Jeongjun Park Date: Mon Sep 9 21:35:58 2024 +0900 mm: shmem: fix data-race in shmem_getattr() commit d949d1d14fa281ace388b1de978e8f2cd52875cf upstream. I got the following KCSAN report during syzbot testing: ================================================================== BUG: KCSAN: data-race in generic_fillattr / inode_set_ctime_current write to 0xffff888102eb3260 of 4 bytes by task 6565 on cpu 1: inode_set_ctime_to_ts include/linux/fs.h:1638 [inline] inode_set_ctime_current+0x169/0x1d0 fs/inode.c:2626 shmem_mknod+0x117/0x180 mm/shmem.c:3443 shmem_create+0x34/0x40 mm/shmem.c:3497 lookup_open fs/namei.c:3578 [inline] open_last_lookups fs/namei.c:3647 [inline] path_openat+0xdbc/0x1f00 fs/namei.c:3883 do_filp_open+0xf7/0x200 fs/namei.c:3913 do_sys_openat2+0xab/0x120 fs/open.c:1416 do_sys_open fs/open.c:1431 [inline] __do_sys_openat fs/open.c:1447 [inline] __se_sys_openat fs/open.c:1442 [inline] __x64_sys_openat+0xf3/0x120 fs/open.c:1442 x64_sys_call+0x1025/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:258 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x54/0x120 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x76/0x7e read to 0xffff888102eb3260 of 4 bytes by task 3498 on cpu 0: inode_get_ctime_nsec include/linux/fs.h:1623 [inline] inode_get_ctime include/linux/fs.h:1629 [inline] generic_fillattr+0x1dd/0x2f0 fs/stat.c:62 shmem_getattr+0x17b/0x200 mm/shmem.c:1157 vfs_getattr_nosec fs/stat.c:166 [inline] vfs_getattr+0x19b/0x1e0 fs/stat.c:207 vfs_statx_path fs/stat.c:251 [inline] vfs_statx+0x134/0x2f0 fs/stat.c:315 vfs_fstatat+0xec/0x110 fs/stat.c:341 __do_sys_newfstatat fs/stat.c:505 [inline] __se_sys_newfstatat+0x58/0x260 fs/stat.c:499 __x64_sys_newfstatat+0x55/0x70 fs/stat.c:499 x64_sys_call+0x141f/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:263 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x54/0x120 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x76/0x7e value changed: 0x2755ae53 -> 0x27ee44d3 Reported by Kernel Concurrency Sanitizer on: CPU: 0 UID: 0 PID: 3498 Comm: udevd Not tainted 6.11.0-rc6-syzkaller-00326-gd1f2d51b711a-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 ================================================================== When calling generic_fillattr(), if you don't hold read lock, data-race will occur in inode member variables, which can cause unexpected behavior. Since there is no special protection when shmem_getattr() calls generic_fillattr(), data-race occurs by functions such as shmem_unlink() or shmem_mknod(). This can cause unexpected results, so commenting it out is not enough. Therefore, when calling generic_fillattr() from shmem_getattr(), it is appropriate to protect the inode using inode_lock_shared() and inode_unlock_shared() to prevent data-race. Link: https://lkml.kernel.org/r/20240909123558.70229-1-aha310510@gmail.com Fixes: 44a30220bc0a ("shmem: recalculate file inode when fstat") Signed-off-by: Jeongjun Park Reported-by: syzbot Cc: Hugh Dickins Cc: Yu Zhao Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 64afad73e4623308d8943645e5631f2c7a2d7971 Author: Ryusuke Konishi Date: Fri Oct 18 04:33:10 2024 +0900 nilfs2: fix kernel bug due to missing clearing of checked flag commit 41e192ad2779cae0102879612dfe46726e4396aa upstream. Syzbot reported that in directory operations after nilfs2 detects filesystem corruption and degrades to read-only, __block_write_begin_int(), which is called to prepare block writes, may fail the BUG_ON check for accesses exceeding the folio/page size, triggering a kernel bug. This was found to be because the "checked" flag of a page/folio was not cleared when it was discarded by nilfs2's own routine, which causes the sanity check of directory entries to be skipped when the directory page/folio is reloaded. So, fix that. This was necessary when the use of nilfs2's own page discard routine was applied to more than just metadata files. Link: https://lkml.kernel.org/r/20241017193359.5051-1-konishi.ryusuke@gmail.com Fixes: 8c26c4e2694a ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption") Signed-off-by: Ryusuke Konishi Reported-by: syzbot+d6ca2daf692c7a82f959@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d6ca2daf692c7a82f959 Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 95fbed8ae8c32c0977e6be1721c190d8fea23f2f Author: Edward Adam Davis Date: Wed Oct 16 19:43:47 2024 +0800 ocfs2: pass u64 to ocfs2_truncate_inline maybe overflow [ Upstream commit bc0a2f3a73fcdac651fca64df39306d1e5ebe3b0 ] Syzbot reported a kernel BUG in ocfs2_truncate_inline. There are two reasons for this: first, the parameter value passed is greater than ocfs2_max_inline_data_with_xattr, second, the start and end parameters of ocfs2_truncate_inline are "unsigned int". So, we need to add a sanity check for byte_start and byte_len right before ocfs2_truncate_inline() in ocfs2_remove_inode_range(), if they are greater than ocfs2_max_inline_data_with_xattr return -EINVAL. Link: https://lkml.kernel.org/r/tencent_D48DB5122ADDAEDDD11918CFB68D93258C07@qq.com Fixes: 1afc32b95233 ("ocfs2: Write support for inline data") Signed-off-by: Edward Adam Davis Reported-by: syzbot+81092778aac03460d6b7@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=81092778aac03460d6b7 Reviewed-by: Joseph Qi Cc: Joel Becker Cc: Joseph Qi Cc: Mark Fasheh Cc: Junxiao Bi Cc: Changwei Ge Cc: Gang He Cc: Jun Piao Cc: Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 23669f189f566845f4725eb5f9e2db9e23085581 Author: Chunyan Zhang Date: Tue Oct 8 17:41:38 2024 +0800 riscv: Remove unused GENERATING_ASM_OFFSETS [ Upstream commit 46d4e5ac6f2f801f97bcd0ec82365969197dc9b1 ] The macro is not used in the current version of kernel, it looks like can be removed to avoid a build warning: ../arch/riscv/kernel/asm-offsets.c: At top level: ../arch/riscv/kernel/asm-offsets.c:7: warning: macro "GENERATING_ASM_OFFSETS" is not used [-Wunused-macros] 7 | #define GENERATING_ASM_OFFSETS Fixes: 9639a44394b9 ("RISC-V: Provide a cleaner raw_smp_processor_id()") Cc: stable@vger.kernel.org Reviewed-by: Alexandre Ghiti Tested-by: Alexandre Ghiti Signed-off-by: Chunyan Zhang Link: https://lore.kernel.org/r/20241008094141.549248-2-zhangchunyan@iscas.ac.cn Signed-off-by: Palmer Dabbelt Signed-off-by: Sasha Levin commit a1686db1e59f8fc016c4c9361e2119dd206f479a Author: Ryusuke Konishi Date: Sun Oct 20 13:51:28 2024 +0900 nilfs2: fix potential deadlock with newly created symlinks commit b3a033e3ecd3471248d474ef263aadc0059e516a upstream. Syzbot reported that page_symlink(), called by nilfs_symlink(), triggers memory reclamation involving the filesystem layer, which can result in circular lock dependencies among the reader/writer semaphore nilfs->ns_segctor_sem, s_writers percpu_rwsem (intwrite) and the fs_reclaim pseudo lock. This is because after commit 21fc61c73c39 ("don't put symlink bodies in pagecache into highmem"), the gfp flags of the page cache for symbolic links are overwritten to GFP_KERNEL via inode_nohighmem(). This is not a problem for symlinks read from the backing device, because the __GFP_FS flag is dropped after inode_nohighmem() is called. However, when a new symlink is created with nilfs_symlink(), the gfp flags remain overwritten to GFP_KERNEL. Then, memory allocation called from page_symlink() etc. triggers memory reclamation including the FS layer, which may call nilfs_evict_inode() or nilfs_dirty_inode(). And these can cause a deadlock if they are called while nilfs->ns_segctor_sem is held: Fix this issue by dropping the __GFP_FS flag from the page cache GFP flags of newly created symlinks in the same way that nilfs_new_inode() and __nilfs_read_inode() do, as a workaround until we adopt nofs allocation scope consistently or improve the locking constraints. Link: https://lkml.kernel.org/r/20241020050003.4308-1-konishi.ryusuke@gmail.com Fixes: 21fc61c73c39 ("don't put symlink bodies in pagecache into highmem") Signed-off-by: Ryusuke Konishi Reported-by: syzbot+9ef37ac20608f4836256@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=9ef37ac20608f4836256 Tested-by: syzbot+9ef37ac20608f4836256@syzkaller.appspotmail.com Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit fcd6b59f7a774558e2525251c68aa37aff748e55 Author: Zicheng Qu Date: Tue Oct 22 13:43:54 2024 +0000 staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg() commit 6bd301819f8f69331a55ae2336c8b111fc933f3d upstream. In the ad9832_write_frequency() function, clk_get_rate() might return 0. This can lead to a division by zero when calling ad9832_calc_freqreg(). The check if (fout > (clk_get_rate(st->mclk) / 2)) does not protect against the case when fout is 0. The ad9832_write_frequency() function is called from ad9832_write(), and fout is derived from a text buffer, which can contain any value. Link: https://lore.kernel.org/all/2024100904-CVE-2024-47663-9bdc@gregkh/ Fixes: ea707584bac1 ("Staging: IIO: DDS: AD9832 / AD9835 driver") Cc: stable@vger.kernel.org Signed-off-by: Zicheng Qu Reviewed-by: Nuno Sa Reviewed-by: Dan Carpenter Link: https://patch.msgid.link/20241022134354.574614-1-quzicheng@huawei.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 9d89941e51259c2b0b8e9c10c6f1f74200d7444f Author: Ville Syrjälä Date: Tue Oct 1 23:07:45 2024 +0300 wifi: iwlegacy: Clear stale interrupts before resuming device commit 07c90acb071b9954e1fecb1e4f4f13d12c544b34 upstream. iwl4965 fails upon resume from hibernation on my laptop. The reason seems to be a stale interrupt which isn't being cleared out before interrupts are enabled. We end up with a race beween the resume trying to bring things back up, and the restart work (queued form the interrupt handler) trying to bring things down. Eventually the whole thing blows up. Fix the problem by clearing out any stale interrupts before interrupts get enabled during resume. Here's a debug log of the indicent: [ 12.042589] ieee80211 phy0: il_isr ISR inta 0x00000080, enabled 0xaa00008b, fh 0x00000000 [ 12.042625] ieee80211 phy0: il4965_irq_tasklet inta 0x00000080, enabled 0x00000000, fh 0x00000000 [ 12.042651] iwl4965 0000:10:00.0: RF_KILL bit toggled to enable radio. [ 12.042653] iwl4965 0000:10:00.0: On demand firmware reload [ 12.042690] ieee80211 phy0: il4965_irq_tasklet End inta 0x00000000, enabled 0xaa00008b, fh 0x00000000, flags 0x00000282 [ 12.052207] ieee80211 phy0: il4965_mac_start enter [ 12.052212] ieee80211 phy0: il_prep_station Add STA to driver ID 31: ff:ff:ff:ff:ff:ff [ 12.052244] ieee80211 phy0: il4965_set_hw_ready hardware ready [ 12.052324] ieee80211 phy0: il_apm_init Init card's basic functions [ 12.052348] ieee80211 phy0: il_apm_init L1 Enabled; Disabling L0S [ 12.055727] ieee80211 phy0: il4965_load_bsm Begin load bsm [ 12.056140] ieee80211 phy0: il4965_verify_bsm Begin verify bsm [ 12.058642] ieee80211 phy0: il4965_verify_bsm BSM bootstrap uCode image OK [ 12.058721] ieee80211 phy0: il4965_load_bsm BSM write complete, poll 1 iterations [ 12.058734] ieee80211 phy0: __il4965_up iwl4965 is coming up [ 12.058737] ieee80211 phy0: il4965_mac_start Start UP work done. [ 12.058757] ieee80211 phy0: __il4965_down iwl4965 is going down [ 12.058761] ieee80211 phy0: il_scan_cancel_timeout Scan cancel timeout [ 12.058762] ieee80211 phy0: il_do_scan_abort Not performing scan to abort [ 12.058765] ieee80211 phy0: il_clear_ucode_stations Clearing ucode stations in driver [ 12.058767] ieee80211 phy0: il_clear_ucode_stations No active stations found to be cleared [ 12.058819] ieee80211 phy0: _il_apm_stop Stop card, put in low power state [ 12.058827] ieee80211 phy0: _il_apm_stop_master stop master [ 12.058864] ieee80211 phy0: il4965_clear_free_frames 0 frames on pre-allocated heap on clear. [ 12.058869] ieee80211 phy0: Hardware restart was requested [ 16.132299] iwl4965 0000:10:00.0: START_ALIVE timeout after 4000ms. [ 16.132303] ------------[ cut here ]------------ [ 16.132304] Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue. [ 16.132338] WARNING: CPU: 0 PID: 181 at net/mac80211/util.c:1826 ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132390] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev [ 16.132456] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Not tainted 6.11.0-cl+ #143 [ 16.132460] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010 [ 16.132463] Workqueue: async async_run_entry_fn [ 16.132469] RIP: 0010:ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132501] Code: da 02 00 00 c6 83 ad 05 00 00 00 48 89 df e8 98 1b fc ff 85 c0 41 89 c7 0f 84 e9 02 00 00 48 c7 c7 a0 e6 48 a0 e8 d1 77 c4 e0 <0f> 0b eb 2d 84 c0 0f 85 8b 01 00 00 c6 87 ad 05 00 00 00 e8 69 1b [ 16.132504] RSP: 0018:ffffc9000029fcf0 EFLAGS: 00010282 [ 16.132507] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: 0000000000000001 [ 16.132509] RDX: ffffffff81f21a18 RSI: 0000000000000086 RDI: 0000000000000001 [ 16.132510] RBP: ffff8880072003c0 R08: 0000000000000000 R09: 0000000000000003 [ 16.132512] R10: 0000000000000000 R11: ffff88807e5b0000 R12: 0000000000000001 [ 16.132514] R13: 0000000000000000 R14: 0000000000000000 R15: 00000000ffffff92 [ 16.132515] FS: 0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000 [ 16.132517] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.132519] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0 [ 16.132521] Call Trace: [ 16.132525] [ 16.132526] ? __warn+0x77/0x120 [ 16.132532] ? ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132564] ? report_bug+0x15c/0x190 [ 16.132568] ? handle_bug+0x36/0x70 [ 16.132571] ? exc_invalid_op+0x13/0x60 [ 16.132573] ? asm_exc_invalid_op+0x16/0x20 [ 16.132579] ? ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132611] ? snd_hdac_bus_init_cmd_io+0x24/0x200 [snd_hda_core] [ 16.132617] ? pick_eevdf+0x133/0x1c0 [ 16.132622] ? check_preempt_wakeup_fair+0x70/0x90 [ 16.132626] ? wakeup_preempt+0x4a/0x60 [ 16.132628] ? ttwu_do_activate.isra.0+0x5a/0x190 [ 16.132632] wiphy_resume+0x79/0x1a0 [cfg80211] [ 16.132675] ? wiphy_suspend+0x2a0/0x2a0 [cfg80211] [ 16.132697] dpm_run_callback+0x75/0x1b0 [ 16.132703] device_resume+0x97/0x200 [ 16.132707] async_resume+0x14/0x20 [ 16.132711] async_run_entry_fn+0x1b/0xa0 [ 16.132714] process_one_work+0x13d/0x350 [ 16.132718] worker_thread+0x2be/0x3d0 [ 16.132722] ? cancel_delayed_work_sync+0x70/0x70 [ 16.132725] kthread+0xc0/0xf0 [ 16.132729] ? kthread_park+0x80/0x80 [ 16.132732] ret_from_fork+0x28/0x40 [ 16.132735] ? kthread_park+0x80/0x80 [ 16.132738] ret_from_fork_asm+0x11/0x20 [ 16.132741] [ 16.132742] ---[ end trace 0000000000000000 ]--- [ 16.132930] ------------[ cut here ]------------ [ 16.132932] WARNING: CPU: 0 PID: 181 at net/mac80211/driver-ops.c:41 drv_stop+0xe7/0xf0 [mac80211] [ 16.132957] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev [ 16.133014] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Tainted: G W 6.11.0-cl+ #143 [ 16.133018] Tainted: [W]=WARN [ 16.133019] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010 [ 16.133021] Workqueue: async async_run_entry_fn [ 16.133025] RIP: 0010:drv_stop+0xe7/0xf0 [mac80211] [ 16.133048] Code: 48 85 c0 74 0e 48 8b 78 08 89 ea 48 89 de e8 e0 87 04 00 65 ff 0d d1 de c4 5f 0f 85 42 ff ff ff e8 be 52 c2 e0 e9 38 ff ff ff <0f> 0b 5b 5d c3 0f 1f 40 00 41 54 49 89 fc 55 53 48 89 f3 2e 2e 2e [ 16.133050] RSP: 0018:ffffc9000029fc50 EFLAGS: 00010246 [ 16.133053] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: ffff88800377f6c0 [ 16.133054] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8880072008e0 [ 16.133056] RBP: 0000000000000000 R08: ffffffff81f238d8 R09: 0000000000000000 [ 16.133058] R10: ffff8880080520f0 R11: 0000000000000000 R12: ffff888008051c60 [ 16.133060] R13: ffff8880072008e0 R14: 0000000000000000 R15: ffff8880072011d8 [ 16.133061] FS: 0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000 [ 16.133063] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.133065] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0 [ 16.133067] Call Trace: [ 16.133069] [ 16.133070] ? __warn+0x77/0x120 [ 16.133075] ? drv_stop+0xe7/0xf0 [mac80211] [ 16.133098] ? report_bug+0x15c/0x190 [ 16.133100] ? handle_bug+0x36/0x70 [ 16.133103] ? exc_invalid_op+0x13/0x60 [ 16.133105] ? asm_exc_invalid_op+0x16/0x20 [ 16.133109] ? drv_stop+0xe7/0xf0 [mac80211] [ 16.133132] ieee80211_do_stop+0x55a/0x810 [mac80211] [ 16.133161] ? fq_codel_reset+0xa5/0xc0 [sch_fq_codel] [ 16.133164] ieee80211_stop+0x4f/0x180 [mac80211] [ 16.133192] __dev_close_many+0xa2/0x120 [ 16.133195] dev_close_many+0x90/0x150 [ 16.133198] dev_close+0x5d/0x80 [ 16.133200] cfg80211_shutdown_all_interfaces+0x40/0xe0 [cfg80211] [ 16.133223] wiphy_resume+0xb2/0x1a0 [cfg80211] [ 16.133247] ? wiphy_suspend+0x2a0/0x2a0 [cfg80211] [ 16.133269] dpm_run_callback+0x75/0x1b0 [ 16.133273] device_resume+0x97/0x200 [ 16.133277] async_resume+0x14/0x20 [ 16.133280] async_run_entry_fn+0x1b/0xa0 [ 16.133283] process_one_work+0x13d/0x350 [ 16.133287] worker_thread+0x2be/0x3d0 [ 16.133290] ? cancel_delayed_work_sync+0x70/0x70 [ 16.133294] kthread+0xc0/0xf0 [ 16.133296] ? kthread_park+0x80/0x80 [ 16.133299] ret_from_fork+0x28/0x40 [ 16.133302] ? kthread_park+0x80/0x80 [ 16.133304] ret_from_fork_asm+0x11/0x20 [ 16.133307] [ 16.133308] ---[ end trace 0000000000000000 ]--- [ 16.133335] ieee80211 phy0: PM: dpm_run_callback(): wiphy_resume [cfg80211] returns -110 [ 16.133360] ieee80211 phy0: PM: failed to restore async: error -110 Cc: stable@vger.kernel.org Cc: Stanislaw Gruszka Cc: Kalle Valo Cc: linux-wireless@vger.kernel.org Signed-off-by: Ville Syrjälä Acked-by: Stanislaw Gruszka Signed-off-by: Kalle Valo Link: https://patch.msgid.link/20241001200745.8276-1-ville.syrjala@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit 6fc9af3df6ca7f3c94774d20f62dc7b49616026d Author: Manikanta Pubbisetty Date: Tue Oct 15 12:11:03 2024 +0530 wifi: ath10k: Fix memory leak in management tx commit e15d84b3bba187aa372dff7c58ce1fd5cb48a076 upstream. In the current logic, memory is allocated for storing the MSDU context during management packet TX but this memory is not being freed during management TX completion. Similar leaks are seen in the management TX cleanup logic. Kmemleak reports this problem as below, unreferenced object 0xffffff80b64ed250 (size 16): comm "kworker/u16:7", pid 148, jiffies 4294687130 (age 714.199s) hex dump (first 16 bytes): 00 2b d8 d8 80 ff ff ff c4 74 e9 fd 07 00 00 00 .+.......t...... backtrace: [] __kmem_cache_alloc_node+0x1e4/0x2d8 [] kmalloc_trace+0x48/0x110 [] ath10k_wmi_tlv_op_gen_mgmt_tx_send+0xd4/0x1d8 [ath10k_core] [] ath10k_mgmt_over_wmi_tx_work+0x134/0x298 [ath10k_core] [] process_scheduled_works+0x1ac/0x400 [] worker_thread+0x208/0x328 [] kthread+0x100/0x1c0 [] ret_from_fork+0x10/0x20 Free the memory during completion and cleanup to fix the leak. Protect the mgmt_pending_tx idr_remove() operation in ath10k_wmi_tlv_op_cleanup_mgmt_tx_send() using ar->data_lock similar to other instances. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1 Fixes: dc405152bb64 ("ath10k: handle mgmt tx completion event") Fixes: c730c477176a ("ath10k: Remove msdu from idr when management pkt send fails") Cc: stable@vger.kernel.org Signed-off-by: Manikanta Pubbisetty Link: https://patch.msgid.link/20241015064103.6060-1-quic_mpubbise@quicinc.com Signed-off-by: Jeff Johnson Signed-off-by: Greg Kroah-Hartman commit 78b698fbf37208ee921ee4cedea75b5d33d6ea9f Author: Felix Fietkau Date: Wed Oct 2 11:56:30 2024 +0200 wifi: mac80211: do not pass a stopped vif to the driver in .get_txpower commit 393b6bc174b0dd21bb2a36c13b36e62fc3474a23 upstream. Avoid potentially crashing in the driver because of uninitialized private data Fixes: 5b3dc42b1b0d ("mac80211: add support for driver tx power reporting") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Link: https://patch.msgid.link/20241002095630.22431-1-nbd@nbd.name Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit d4dba9a076838f3d0333a6a66efec2cdda90b2ee Author: Greg Kroah-Hartman Date: Tue Oct 29 01:23:04 2024 +0100 Revert "driver core: Fix uevent_show() vs driver detach race" commit 9a71892cbcdb9d1459c84f5a4c722b14354158a5 upstream. This reverts commit 15fffc6a5624b13b428bb1c6e9088e32a55eb82c. This commit causes a regression, so revert it for now until it can come back in a way that works for everyone. Link: https://lore.kernel.org/all/172790598832.1168608.4519484276671503678.stgit@dwillia2-xfh.jf.intel.com/ Fixes: 15fffc6a5624 ("driver core: Fix uevent_show() vs driver detach race") Cc: stable Cc: Ashish Sangwan Cc: Namjae Jeon Cc: Dirk Behme Cc: Greg Kroah-Hartman Cc: Rafael J. Wysocki Cc: Dan Williams Signed-off-by: Greg Kroah-Hartman commit b115ecd0c6f3d35b38809b3301dee954b57094c2 Author: Faisal Hassan Date: Tue Oct 22 21:26:31 2024 +0530 xhci: Fix Link TRB DMA in command ring stopped completion event commit 075919f6df5dd82ad0b1894898b315fbb3c29b84 upstream. During the aborting of a command, the software receives a command completion event for the command ring stopped, with the TRB pointing to the next TRB after the aborted command. If the command we abort is located just before the Link TRB in the command ring, then during the 'command ring stopped' completion event, the xHC gives the Link TRB in the event's cmd DMA, which causes a mismatch in handling command completion event. To address this situation, move the 'command ring stopped' completion event check slightly earlier, since the specific command it stopped on isn't of significant concern. Fixes: 7f84eef0dafb ("USB: xhci: No-op command queueing and irq handler.") Cc: stable@vger.kernel.org Signed-off-by: Faisal Hassan Acked-by: Mathias Nyman Link: https://lore.kernel.org/r/20241022155631.1185-1-quic_faisalh@quicinc.com Signed-off-by: Greg Kroah-Hartman commit ceb2f3fe8e4b61e51bc998d82dd6dc98f776e900 Author: Zijun Hu Date: Sun Oct 20 17:33:42 2024 +0800 usb: phy: Fix API devm_usb_put_phy() can not release the phy commit fdce49b5da6e0fb6d077986dec3e90ef2b094b50 upstream. For devm_usb_put_phy(), its comment says it needs to invoke usb_put_phy() to release the phy, but it does not do that actually, so it can not fully undo what the API devm_usb_get_phy() does, that is wrong, fixed by using devres_release() instead of devres_destroy() within the API. Fixes: cedf8602373a ("usb: phy: move bulk of otg/otg.c to phy/phy.c") Cc: stable@vger.kernel.org Signed-off-by: Zijun Hu Link: https://lore.kernel.org/r/20241020-usb_phy_fix-v1-1-7f79243b8e1e@quicinc.com Signed-off-by: Greg Kroah-Hartman commit aaa1b28378373df86b162caa6c4c40dc6b1e1e3e Author: Zongmin Zhou Date: Thu Oct 24 10:27:00 2024 +0800 usbip: tools: Fix detach_port() invalid port error path commit e7cd4b811c9e019f5acbce85699c622b30194c24 upstream. The detach_port() doesn't return error when detach is attempted on an invalid port. Fixes: 40ecdeb1a187 ("usbip: usbip_detach: fix to check for invalid ports") Cc: stable@vger.kernel.org Reviewed-by: Hongren Zheng Reviewed-by: Shuah Khan Signed-off-by: Zongmin Zhou Link: https://lore.kernel.org/r/20241024022700.1236660-1-min_halo@163.com Signed-off-by: Greg Kroah-Hartman commit d54dad3af7c40087a8eab2f3f3870dd73b29cd30 Author: Dimitri Sivanich Date: Thu Sep 19 07:34:50 2024 -0500 misc: sgi-gru: Don't disable preemption in GRU driver [ Upstream commit b983b271662bd6104d429b0fd97af3333ba760bf ] Disabling preemption in the GRU driver is unnecessary, and clashes with sleeping locks in several code paths. Remove preempt_disable and preempt_enable from the GRU driver. Signed-off-by: Dimitri Sivanich Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit 57aabb8c9786fc3106bb5c0e3615e72510155338 Author: Daniel Palmer Date: Mon Oct 7 19:43:17 2024 +0900 net: amd: mvme147: Fix probe banner message [ Upstream commit 82c5b53140faf89c31ea2b3a0985a2f291694169 ] Currently this driver prints this line with what looks like a rogue format specifier when the device is probed: [ 2.840000] eth%d: MVME147 at 0xfffe1800, irq 12, Hardware Address xx:xx:xx:xx:xx:xx Change the printk() for netdev_info() and move it after the registration has completed so it prints out the name of the interface properly. Signed-off-by: Daniel Palmer Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 14b6ca78c982056f49cf0f6e3436f768cb5a7346 Author: Xiongfeng Wang Date: Wed Oct 16 16:47:40 2024 +0800 firmware: arm_sdei: Fix the input parameter of cpuhp_remove_state() [ Upstream commit c83212d79be2c9886d3e6039759ecd388fd5fed1 ] In sdei_device_freeze(), the input parameter of cpuhp_remove_state() is passed as 'sdei_entry_point' by mistake. Change it to 'sdei_hp_state'. Fixes: d2c48b2387eb ("firmware: arm_sdei: Fix sleep from invalid context BUG") Signed-off-by: Xiongfeng Wang Reviewed-by: James Morse Link: https://lore.kernel.org/r/20241016084740.183353-1-wangxiongfeng2@huawei.com Signed-off-by: Will Deacon Signed-off-by: Sasha Levin commit 3c2206700e0f43c1ecf903e45a528b618dae7b82 Author: zhong jiang Date: Fri Sep 13 00:52:27 2019 +0800 drivers/misc: ti-st: Remove unneeded variable in st_tty_open [ Upstream commit 8b063441b7417a79b0c27efc401479748ccf8ad1 ] st_tty_open do not need local variable to store different value, Hence just remove it. Signed-off-by: zhong jiang Link: https://lore.kernel.org/r/1568307147-43468-1-git-send-email-zhongjiang@huawei.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: c83212d79be2 ("firmware: arm_sdei: Fix the input parameter of cpuhp_remove_state()") Signed-off-by: Sasha Levin commit ac7df3fc80fc82bcc3b1e8f6ebc0d2c435d0c534 Author: Pablo Neira Ayuso Date: Wed Oct 30 23:13:48 2024 +0100 netfilter: nft_payload: sanitize offset and length before calling skb_checksum() [ Upstream commit d5953d680f7e96208c29ce4139a0e38de87a57fe ] If access to offset + length is larger than the skbuff length, then skb_checksum() triggers BUG_ON(). skb_checksum() internally subtracts the length parameter while iterating over skbuff, BUG_ON(len) at the end of it checks that the expected length to be included in the checksum calculation is fully consumed. Fixes: 7ec3f7b47b8d ("netfilter: nft_payload: add packet mangling support") Reported-by: Slavin Liu Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 477b35d94a21530046fe91589960732fcf2b29ed Author: Benoît Monin Date: Thu Oct 24 16:01:54 2024 +0200 net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension [ Upstream commit 04c20a9356f283da623903e81e7c6d5df7e4dc3c ] As documented in skbuff.h, devices with NETIF_F_IPV6_CSUM capability can only checksum TCP and UDP over IPv6 if the IP header does not contains extension. This is enforced for UDP packets emitted from user-space to an IPv6 address as they go through ip6_make_skb(), which calls __ip6_append_data() where a check is done on the header size before setting CHECKSUM_PARTIAL. But the introduction of UDP encapsulation with fou6 added a code-path where it is possible to get an skb with a partial UDP checksum and an IPv6 header with extension: * fou6 adds a UDP header with a partial checksum if the inner packet does not contains a valid checksum. * ip6_tunnel adds an IPv6 header with a destination option extension header if encap_limit is non-zero (the default value is 4). The thread linked below describes in more details how to reproduce the problem with GRE-in-UDP tunnel. Add a check on the network header size in skb_csum_hwoffload_help() to make sure no IPv6 packet with extension header is handed to a network device with NETIF_F_IPV6_CSUM capability. Link: https://lore.kernel.org/netdev/26548921.1r3eYUQgxm@benoit.monin/T/#u Fixes: aa3463d65e7b ("fou: Add encap ops for IPv6 tunnels") Signed-off-by: Benoît Monin Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/5fbeecfc311ea182aa1d1c771725ab8b4cac515e.1729778144.git.benoit.monin@gmx.fr Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 5715da54102b1030ce2db884e2795837a8ce4058 Author: Xin Long Date: Thu Jan 28 17:18:31 2021 +0800 net: support ip generic csum processing in skb_csum_hwoffload_help [ Upstream commit 62fafcd63139920eb25b3fbf154177ce3e6f3232 ] NETIF_F_IP|IPV6_CSUM feature flag indicates UDP and TCP csum offload while NETIF_F_HW_CSUM feature flag indicates ip generic csum offload for HW, which includes not only for TCP/UDP csum, but also for other protocols' csum like GRE's. However, in skb_csum_hwoffload_help() it only checks features against NETIF_F_CSUM_MASK(NETIF_F_HW|IP|IPV6_CSUM). So if it's a non TCP/UDP packet and the features doesn't support NETIF_F_HW_CSUM, but supports NETIF_F_IP|IPV6_CSUM only, it would still return 0 and leave the HW to do csum. This patch is to support ip generic csum processing by checking NETIF_F_HW_CSUM for all protocols, and check (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM) only for TCP and UDP. Note that we're using skb->csum_offset to check if it's a TCP/UDP proctol, this might be fragile. However, as Alex said, for now we only have a few L4 protocols that are requesting Tx csum offload, we'd better fix this until a new protocol comes with a same csum offset. v1->v2: - not extend skb->csum_not_inet, but use skb->csum_offset to tell if it's an UDP/TCP csum packet. v2->v3: - add a note in the changelog, as Willem suggested. Suggested-by: Alexander Duyck Signed-off-by: Xin Long Signed-off-by: Jakub Kicinski Stable-dep-of: 04c20a9356f2 ("net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension") Signed-off-by: Sasha Levin commit 91afbc0eb3c90258ae378ae3c6ead3d2371e926d Author: Byeonguk Jeong Date: Sat Oct 26 14:02:43 2024 +0900 bpf: Fix out-of-bounds write in trie_get_next_key() [ Upstream commit 13400ac8fb80c57c2bfb12ebd35ee121ce9b4d21 ] trie_get_next_key() allocates a node stack with size trie->max_prefixlen, while it writes (trie->max_prefixlen + 1) nodes to the stack when it has full paths from the root to leaves. For example, consider a trie with max_prefixlen is 8, and the nodes with key 0x00/0, 0x00/1, 0x00/2, ... 0x00/8 inserted. Subsequent calls to trie_get_next_key with _key with .prefixlen = 8 make 9 nodes be written on the node stack with size 8. Fixes: b471f2f1de8b ("bpf: implement MAP_GET_NEXT_KEY command for LPM_TRIE map") Signed-off-by: Byeonguk Jeong Reviewed-by: Toke Høiland-Jørgensen Tested-by: Hou Tao Acked-by: Hou Tao Link: https://lore.kernel.org/r/Zxx384ZfdlFYnz6J@localhost.localdomain Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin commit dbe778b08b5101df9e89bc06e0a3a7ecd2f4ef20 Author: Pedro Tammela Date: Thu Oct 24 12:55:47 2024 -0400 net/sched: stop qdisc_tree_reduce_backlog on TC_H_ROOT [ Upstream commit 2e95c4384438adeaa772caa560244b1a2efef816 ] In qdisc_tree_reduce_backlog, Qdiscs with major handle ffff: are assumed to be either root or ingress. This assumption is bogus since it's valid to create egress qdiscs with major handle ffff: Budimir Markovic found that for qdiscs like DRR that maintain an active class list, it will cause a UAF with a dangling class pointer. In 066a3b5b2346, the concern was to avoid iterating over the ingress qdisc since its parent is itself. The proper fix is to stop when parent TC_H_ROOT is reached because the only way to retrieve ingress is when a hierarchy which does not contain a ffff: major handle call into qdisc_lookup with TC_H_MAJ(TC_H_ROOT). In the scenario where major ffff: is an egress qdisc in any of the tree levels, the updates will also propagate to TC_H_ROOT, which then the iteration must stop. Fixes: 066a3b5b2346 ("[NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop") Reported-by: Budimir Markovic Suggested-by: Jamal Hadi Salim Tested-by: Victor Nogueira Signed-off-by: Pedro Tammela Signed-off-by: Jamal Hadi Salim net/sched/sch_api.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Reviewed-by: Simon Horman Link: https://patch.msgid.link/20241024165547.418570-1-jhs@mojatatu.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 2bb69ce76eedd2b7fc7a3b43314db7f5267fdf5e Author: Pablo Neira Ayuso Date: Tue Oct 22 16:48:25 2024 +0200 gtp: allow -1 to be specified as file description from userspace [ Upstream commit 7515e37bce5c428a56a9b04ea7e96b3f53f17150 ] Existing user space applications maintained by the Osmocom project are breaking since a recent fix that addresses incorrect error checking. Restore operation for user space programs that specify -1 as file descriptor to skip GTPv0 or GTPv1 only sockets. Fixes: defd8b3c37b0 ("gtp: fix a potential NULL pointer dereference") Reported-by: Pau Espin Pedrol Signed-off-by: Pablo Neira Ayuso Tested-by: Oliver Smith Reviewed-by: Simon Horman Link: https://patch.msgid.link/20241022144825.66740-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 5f6907bf5c4c7931089b5d5cd92b5e0e9025375d Author: Christophe JAILLET Date: Sun Jan 5 18:36:07 2020 +0100 gtp: simplify error handling code in 'gtp_encap_enable()' [ Upstream commit b289ba5e07105548b8219695e5443d807a825eb8 ] 'gtp_encap_disable_sock(sk)' handles the case where sk is NULL, so there is no need to test it before calling the function. This saves a few line of code. Signed-off-by: Christophe JAILLET Reviewed-by: Simon Horman Signed-off-by: David S. Miller Stable-dep-of: 7515e37bce5c ("gtp: allow -1 to be specified as file description from userspace") Signed-off-by: Sasha Levin commit c593895bf0279cbcad4e8e1f31aa6da8bfd27f95 Author: Maciej Falkowski Date: Tue Sep 17 12:37:27 2019 +0200 dt-bindings: gpu: Convert Samsung Image Rotator to dt-schema [ Upstream commit 6e3ffcd592060403ee2d956c9b1704775898db79 ] Convert Samsung Image Rotator to newer dt-schema format. Signed-off-by: Maciej Falkowski Signed-off-by: Marek Szyprowski Signed-off-by: Rob Herring Stable-dep-of: 338c4d3902fe ("igb: Disable threaded IRQ for igb_msix_other") Signed-off-by: Sasha Levin commit b2ed38ff2a2d51f0132d0862a8cd0415f1925875 Author: Christophe JAILLET Date: Sat Oct 26 22:46:34 2024 +0200 ASoC: cs42l51: Fix some error handling paths in cs42l51_probe() [ Upstream commit d221b844ee79823ffc29b7badc4010bdb0960224 ] If devm_gpiod_get_optional() fails, we need to disable previously enabled regulators, as done in the other error handling path of the function. Also, gpiod_set_value_cansleep(, 1) needs to be called to undo a potential gpiod_set_value_cansleep(, 0). If the "reset" gpio is not defined, this additional call is just a no-op. This behavior is the same as the one already in the .remove() function. Fixes: 11b9cd748e31 ("ASoC: cs42l51: add reset management") Signed-off-by: Christophe JAILLET Reviewed-by: Charles Keepax Link: https://patch.msgid.link/a5e5f4b9fb03f46abd2c93ed94b5c395972ce0d1.1729975570.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 9c98ee7ea463a838235e7a0e35851b38476364f2 Author: Daniel Gabay Date: Thu Oct 10 14:05:05 2024 +0300 wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd() [ Upstream commit 07a6e3b78a65f4b2796a8d0d4adb1a15a81edead ] 1. The size of the response packet is not validated. 2. The response buffer is not freed. Resolve these issues by switching to iwl_mvm_send_cmd_status(), which handles both size validation and frees the buffer. Fixes: f130bb75d881 ("iwlwifi: add FW recovery flow") Signed-off-by: Daniel Gabay Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20241010140328.76c73185951e.Id3b6ca82ced2081f5ee4f33c997491d0ebda83f7@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 8b30a66a94ea1b1c0c052996567d1838f3dc8888 Author: Emmanuel Grumbach Date: Sun Jan 28 08:53:56 2024 +0200 wifi: iwlwifi: mvm: disconnect station vifs if recovery failed [ Upstream commit e50a88e5cb8792cc416866496288c5f4d1eb4b1f ] This will allow to reconnect immediately instead of leaving the connection in a limbo state. Signed-off-by: Emmanuel Grumbach Reviewed-by: Gregory Greenman Signed-off-by: Miri Korenblit Link: https://msgid.link/20240128084842.e90531cd3a36.Iebdc9483983c0d8497f9dcf9d79ec37332a5fdcc@changeid Signed-off-by: Johannes Berg Stable-dep-of: 07a6e3b78a65 ("wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd()") Signed-off-by: Sasha Levin commit 130b34a204a585fabfa172b9bba90bec2a91d591 Author: Youghandhar Chintala Date: Tue Mar 8 17:23:24 2022 +0530 mac80211: Add support to trigger sta disconnect on hardware restart [ Upstream commit 7d352ccf1e9935b5222ca84e8baeb07a0c8f94b9 ] Currently in case of target hardware restart, we just reconfig and re-enable the security keys and enable the network queues to start data traffic back from where it was interrupted. Many ath10k wifi chipsets have sequence numbers for the data packets assigned by firmware and the mac sequence number will restart from zero after target hardware restart leading to mismatch in the sequence number expected by the remote peer vs the sequence number of the frame sent by the target firmware. This mismatch in sequence number will cause out-of-order packets on the remote peer and all the frames sent by the device are dropped until we reach the sequence number which was sent before we restarted the target hardware In order to fix this, we trigger a sta disconnect, in case of target hw restart. After this there will be a fresh connection and thereby avoiding the dropping of frames by remote peer. The right fix would be to pull the entire data path into the host which is not feasible or would need lots of complex changes and will still be inefficient. Tested on ath10k using WCN3990, QCA6174 Signed-off-by: Youghandhar Chintala Link: https://lore.kernel.org/r/20220308115325.5246-2-youghand@codeaurora.org Signed-off-by: Johannes Berg Stable-dep-of: 07a6e3b78a65 ("wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd()") Signed-off-by: Sasha Levin commit 0a2112edf6d8b9f9e718bf7caca399554e96138e Author: Johannes Berg Date: Mon Nov 29 15:32:40 2021 +0200 mac80211: do drv_reconfig_complete() before restarting all [ Upstream commit 13dee10b30c058ee2c58c5da00339cc0d4201aa6 ] When we reconfigure, the driver might do some things to complete the reconfiguration. It's strange and could be broken in some cases because we restart other works (e.g. remain-on-channel and TX) before this happens, yet only start queues later. Change this to do the reconfig complete when reconfiguration is actually complete, not when we've already started doing other things again. For iwlwifi, this should fix a race where the reconfig can race with TX, for ath10k and ath11k that also use this it won't make a difference because they just start queues there, and mac80211 also stopped the queues and will restart them later as before. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/iwlwifi.20211129152938.cab99f22fe19.Iefe494687f15fd85f77c1b989d1149c8efdfdc36@changeid Signed-off-by: Johannes Berg Stable-dep-of: 07a6e3b78a65 ("wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd()") Signed-off-by: Sasha Levin commit e67cb5a1cd5bd0678ff47d5361ef4ff17bead304 Author: Felix Fietkau Date: Sun Oct 6 17:36:30 2024 +0200 wifi: mac80211: skip non-uploaded keys in ieee80211_iter_keys [ Upstream commit 52009b419355195912a628d0a9847922e90c348c ] Sync iterator conditions with ieee80211_iter_keys_rcu. Fixes: 830af02f24fb ("mac80211: allow driver to iterate keys") Signed-off-by: Felix Fietkau Link: https://patch.msgid.link/20241006153630.87885-1-nbd@nbd.name Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 4f3e9217fbf1f07cffd7946ef6794eb6fa01318b Author: Xiu Jianfeng Date: Sat Oct 12 07:22:46 2024 +0000 cgroup: Fix potential overflow issue when checking max_depth [ Upstream commit 3cc4e13bb1617f6a13e5e6882465984148743cf4 ] cgroup.max.depth is the maximum allowed descent depth below the current cgroup. If the actual descent depth is equal or larger, an attempt to create a new child cgroup will fail. However due to the cgroup->max_depth is of int type and having the default value INT_MAX, the condition 'level > cgroup->max_depth' will never be satisfied, and it will cause an overflow of the level after it reaches to INT_MAX. Fix it by starting the level from 0 and using '>=' instead. It's worth mentioning that this issue is unlikely to occur in reality, as it's impossible to have a depth of INT_MAX hierarchy, but should be be avoided logically. Fixes: 1a926e0bbab8 ("cgroup: implement hierarchy limits") Signed-off-by: Xiu Jianfeng Reviewed-by: Michal Koutný Signed-off-by: Tejun Heo Signed-off-by: Sasha Levin commit 401ad99a5ae7180dd9449eac104cb755f442e7f3 Author: Sabrina Dubroca Date: Tue Oct 1 18:48:14 2024 +0200 xfrm: validate new SA's prefixlen using SA family when sel.family is unset [ Upstream commit 3f0ab59e6537c6a8f9e1b355b48f9c05a76e8563 ] This expands the validation introduced in commit 07bf7908950a ("xfrm: Validate address prefix lengths in the xfrm selector.") syzbot created an SA with usersa.sel.family = AF_UNSPEC usersa.sel.prefixlen_s = 128 usersa.family = AF_INET Because of the AF_UNSPEC selector, verify_newsa_info doesn't put limits on prefixlen_{s,d}. But then copy_from_user_state sets x->sel.family to usersa.family (AF_INET). Do the same conversion in verify_newsa_info before validating prefixlen_{s,d}, since that's how prefixlen is going to be used later on. Reported-by: syzbot+cc39f136925517aed571@syzkaller.appspotmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Sabrina Dubroca Signed-off-by: Steffen Klassert Signed-off-by: Antony Antony Signed-off-by: Sasha Levin commit 9085d7eaac3f0bbe05b0545c54058fbbd404f999 Author: junhua huang Date: Wed Dec 28 09:54:12 2022 +0800 arm64/uprobes: change the uprobe_opcode_t typedef to fix the sparse warning commit ef08c0fadd8a17ebe429b85e23952dac3263ad34 upstream. After we fixed the uprobe inst endian in aarch_be, the sparse check report the following warning info: sparse warnings: (new ones prefixed by >>) >> kernel/events/uprobes.c:223:25: sparse: sparse: restricted __le32 degrades to integer >> kernel/events/uprobes.c:574:56: sparse: sparse: incorrect type in argument 4 (different base types) @@ expected unsigned int [addressable] [usertype] opcode @@ got restricted __le32 [usertype] @@ kernel/events/uprobes.c:574:56: sparse: expected unsigned int [addressable] [usertype] opcode kernel/events/uprobes.c:574:56: sparse: got restricted __le32 [usertype] >> kernel/events/uprobes.c:1483:32: sparse: sparse: incorrect type in initializer (different base types) @@ expected unsigned int [usertype] insn @@ got restricted __le32 [usertype] @@ kernel/events/uprobes.c:1483:32: sparse: expected unsigned int [usertype] insn kernel/events/uprobes.c:1483:32: sparse: got restricted __le32 [usertype] use the __le32 to u32 for uprobe_opcode_t, to keep the same. Fixes: 60f07e22a73d ("arm64:uprobe fix the uprobe SWBP_INSN in big-endian") Reported-by: kernel test robot Signed-off-by: junhua huang Link: https://lore.kernel.org/r/202212280954121197626@zte.com.cn Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman commit 5121ac67236bdd38e6b5db94dac7468999f4abe7 Author: Paul Moore Date: Fri Oct 25 11:21:18 2024 -0300 selinux: improve error checking in sel_write_load() [ Upstream commit 42c773238037c90b3302bf37a57ae3b5c3f6004a ] Move our existing input sanity checking to the top of sel_write_load() and add a check to ensure the buffer size is non-zero. Move a local variable initialization from the declaration to before it is used. Minor style adjustments. Reported-by: Sam Sun Signed-off-by: Paul Moore [cascardo: keep fsi initialization at its declaration point as it is used earlier] [cascardo: keep check for 64MiB size limit] Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Sasha Levin commit 31a38a908c98aebc7a1104dab5f1ba199f234b7b Author: Haiyang Zhang Date: Fri Oct 18 11:25:22 2024 -0700 hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event commit 4c262801ea60c518b5bebc22a09f5b78b3147da2 upstream. The existing code moves VF to the same namespace as the synthetic NIC during netvsc_register_vf(). But, if the synthetic device is moved to a new namespace after the VF registration, the VF won't be moved together. To make the behavior more consistent, add a namespace check for synthetic NIC's NETDEV_REGISTER event (generated during its move), and move the VF if it is not in the same namespace. Cc: stable@vger.kernel.org Fixes: c0a41b887ce6 ("hv_netvsc: move VF to same namespace as netvsc device") Suggested-by: Stephen Hemminger Signed-off-by: Haiyang Zhang Reviewed-by: Simon Horman Link: https://patch.msgid.link/1729275922-17595-1-git-send-email-haiyangz@microsoft.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit ae95e0235c98dbc8fe7b182e65880cf024aa245c Author: José Relvas Date: Sun Oct 20 11:27:56 2024 +0100 ALSA: hda/realtek: Add subwoofer quirk for Acer Predator G9-593 commit 35fdc6e1c16099078bcbd73a6c8f1733ae7f1909 upstream. The Acer Predator G9-593 has a 2+1 speaker system which isn't probed correctly. This patch adds a quirk with the proper pin connections. Note that I do not own this laptop, so I cannot guarantee that this fixes the issue. Testing was done by other users here: https://discussion.fedoraproject.org/t/-/118482 This model appears to have two different dev IDs... - 0x1177 (as seen on the forum link above) - 0x1178 (as seen on https://linux-hardware.org/?probe=127df9999f) I don't think the audio system was changed between model revisions, so the patch applies for both IDs. Signed-off-by: José Relvas Link: https://patch.msgid.link/20241020102756.225258-1-josemonsantorelvas@gmail.com Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 412a30b1b28d6073ba29c46a2b0f324c5936293f Author: Ryusuke Konishi Date: Wed Oct 16 06:32:07 2024 +0900 nilfs2: fix kernel bug due to missing clearing of buffer delay flag commit 6ed469df0bfbef3e4b44fca954a781919db9f7ab upstream. Syzbot reported that after nilfs2 reads a corrupted file system image and degrades to read-only, the BUG_ON check for the buffer delay flag in submit_bh_wbc() may fail, causing a kernel bug. This is because the buffer delay flag is not cleared when clearing the buffer state flags to discard a page/folio or a buffer head. So, fix this. This became necessary when the use of nilfs2's own page clear routine was expanded. This state inconsistency does not occur if the buffer is written normally by log writing. Signed-off-by: Ryusuke Konishi Link: https://lore.kernel.org/r/20241015213300.7114-1-konishi.ryusuke@gmail.com Fixes: 8c26c4e2694a ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption") Reported-by: syzbot+985ada84bf055a575c07@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=985ada84bf055a575c07 Cc: stable@vger.kernel.org Signed-off-by: Christian Brauner Signed-off-by: Greg Kroah-Hartman commit 507f393403ccf312683defb43704dc84326678b1 Author: Shubham Panwar Date: Sun Oct 20 15:20:46 2024 +0530 ACPI: button: Add DMI quirk for Samsung Galaxy Book2 to fix initial lid detection issue commit 8fa73ee44daefc884c53a25158c25a4107eb5a94 upstream. Add a DMI quirk for Samsung Galaxy Book2 to fix an initial lid state detection issue. The _LID device incorrectly returns the lid status as "closed" during boot, causing the system to enter a suspend loop right after booting. The quirk ensures that the correct lid state is reported initially, preventing the system from immediately suspending after startup. It only addresses the initial lid state detection and ensures proper system behavior upon boot. Signed-off-by: Shubham Panwar Link: https://patch.msgid.link/20241020095045.6036-2-shubiisp8@gmail.com [ rjw: Changelog edits ] Cc: All applicable Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit 0fdb503758578ec65594ae70e39fa71e995228cc Author: Christian Heusel Date: Thu Oct 17 13:16:26 2024 +0200 ACPI: resource: Add LG 16T90SP to irq1_level_low_skip_override[] commit 53f1a907d36fb3aa02a4d34073bcec25823a6c74 upstream. The LG Gram Pro 16 2-in-1 (2024) the 16T90SP has its keybopard IRQ (1) described as ActiveLow in the DSDT, which the kernel overrides to EdgeHigh which breaks the keyboard. Add the 16T90SP to the irq1_level_low_skip_override[] quirk table to fix this. Reported-by: Dirk Holten Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219382 Cc: All applicable Suggested-by: Dirk Holten Signed-off-by: Christian Heusel Link: https://patch.msgid.link/20241017-lg-gram-pro-keyboard-v2-1-7c8fbf6ff718@heusel.eu Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit 43b4fa6e0e238c6e2662f4fb61d9f51c2785fb1d Author: Mario Limonciello Date: Fri Oct 11 12:23:15 2024 -0500 drm/amd: Guard against bad data for ATIF ACPI method commit bf58f03931fdcf7b3c45cb76ac13244477a60f44 upstream. If a BIOS provides bad data in response to an ATIF method call this causes a NULL pointer dereference in the caller. ``` ? show_regs (arch/x86/kernel/dumpstack.c:478 (discriminator 1)) ? __die (arch/x86/kernel/dumpstack.c:423 arch/x86/kernel/dumpstack.c:434) ? page_fault_oops (arch/x86/mm/fault.c:544 (discriminator 2) arch/x86/mm/fault.c:705 (discriminator 2)) ? do_user_addr_fault (arch/x86/mm/fault.c:440 (discriminator 1) arch/x86/mm/fault.c:1232 (discriminator 1)) ? acpi_ut_update_object_reference (drivers/acpi/acpica/utdelete.c:642) ? exc_page_fault (arch/x86/mm/fault.c:1542) ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623) ? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:387 (discriminator 2)) amdgpu ? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:386 (discriminator 1)) amdgpu ``` It has been encountered on at least one system, so guard for it. Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)") Acked-by: Alex Deucher Signed-off-by: Mario Limonciello Signed-off-by: Alex Deucher (cherry picked from commit c9b7c809b89f24e9372a4e7f02d64c950b07fdee) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 4cab98a1734738cd74042fb38564e680147b2f6c Author: Kailang Yang Date: Wed Oct 23 16:13:10 2024 +0800 ALSA: hda/realtek: Update default depop procedure [ Upstream commit e3ea2757c312e51bbf62ebc434a6f7df1e3a201f ] Old procedure has a chance to meet Headphone no output. Fixes: c2d6af53a43f ("ALSA: hda/realtek - Add default procedure for suspend and resume state") Signed-off-by: Kailang Yang Link: https://lore.kernel.org/17b717a0a0b04a77aea4a8ec820cba13@realtek.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit d575414361630b8b0523912532fcd7c79e43468c Author: Andrey Shumilin Date: Fri Oct 18 09:00:18 2024 +0300 ALSA: firewire-lib: Avoid division by zero in apply_constraint_to_size() [ Upstream commit 72cafe63b35d06b5cfbaf807e90ae657907858da ] The step variable is initialized to zero. It is changed in the loop, but if it's not changed it will remain zero. Add a variable check before the division. The observed behavior was introduced by commit 826b5de90c0b ("ALSA: firewire-lib: fix insufficient PCM rule for period/buffer size"), and it is difficult to show that any of the interval parameters will satisfy the snd_interval_test() condition with data from the amdtp_rate_table[] table. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 826b5de90c0b ("ALSA: firewire-lib: fix insufficient PCM rule for period/buffer size") Signed-off-by: Andrey Shumilin Reviewed-by: Takashi Sakamoto Link: https://patch.msgid.link/20241018060018.1189537-1-shum.sdl@nppct.ru Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit a8219446b95a859488feaade674d13f9efacfa32 Author: Jinjie Ruan Date: Fri Oct 18 18:07:48 2024 +0800 posix-clock: posix-clock: Fix unbalanced locking in pc_clock_settime() [ Upstream commit 6e62807c7fbb3c758d233018caf94dfea9c65dbd ] If get_clock_desc() succeeds, it calls fget() for the clockid's fd, and get the clk->rwsem read lock, so the error path should release the lock to make the lock balance and fput the clockid's fd to make the refcount balance and release the fd related resource. However the below commit left the error path locked behind resulting in unbalanced locking. Check timespec64_valid_strict() before get_clock_desc() to fix it, because the "ts" is not changed after that. Fixes: d8794ac20a29 ("posix-clock: Fix missing timespec64 check in pc_clock_settime()") Acked-by: Richard Cochran Signed-off-by: Jinjie Ruan Acked-by: Anna-Maria Behnsen [pabeni@redhat.com: fixed commit message typo] Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 6e2bbba8bbf211f34dfcf82545bd7afb55890556 Author: Heiner Kallweit Date: Fri Oct 18 11:08:16 2024 +0200 r8169: avoid unsolicited interrupts [ Upstream commit 10ce0db787004875f4dba068ea952207d1d8abeb ] It was reported that after resume from suspend a PCI error is logged and connectivity is broken. Error message is: PCI error (cmd = 0x0407, status_errs = 0x0000) The message seems to be a red herring as none of the error bits is set, and the PCI command register value also is normal. Exception handling for a PCI error includes a chip reset what apparently brakes connectivity here. The interrupt status bit triggering the PCI error handling isn't actually used on PCIe chip versions, so it's not clear why this bit is set by the chip. Fix this by ignoring this bit on PCIe chip versions. Fixes: 0e4851502f84 ("r8169: merge with version 8.001.00 of Realtek's r8168 driver") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219388 Tested-by: Atlas Yu Signed-off-by: Heiner Kallweit Reviewed-by: Simon Horman Link: https://patch.msgid.link/78e2f535-438f-4212-ad94-a77637ac6c9c@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 2f868ce6013548a713c431c679ef73747a66fcf3 Author: Dmitry Antipov Date: Fri Oct 18 08:13:38 2024 +0300 net: sched: fix use-after-free in taprio_change() [ Upstream commit f504465970aebb2467da548f7c1efbbf36d0f44b ] In 'taprio_change()', 'admin' pointer may become dangling due to sched switch / removal caused by 'advance_sched()', and critical section protected by 'q->current_entry_lock' is too small to prevent from such a scenario (which causes use-after-free detected by KASAN). Fix this by prefer 'rcu_replace_pointer()' over 'rcu_assign_pointer()' to update 'admin' immediately before an attempt to schedule freeing. Fixes: a3d43c0d56f1 ("taprio: Add support adding an admin schedule") Reported-by: syzbot+b65e0af58423fc8a73aa@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=b65e0af58423fc8a73aa Acked-by: Vinicius Costa Gomes Signed-off-by: Dmitry Antipov Link: https://patch.msgid.link/20241018051339.418890-1-dmantipov@yandex.ru Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 9fc566dfed9a30f171c7c262429d0931735ef644 Author: Oliver Neukum Date: Thu Oct 17 09:18:37 2024 +0200 net: usb: usbnet: fix name regression [ Upstream commit 8a7d12d674ac6f2147c18f36d1e15f1a48060edf ] The fix for MAC addresses broke detection of the naming convention because it gave network devices no random MAC before bind() was called. This means that the check for the local assignment bit was always negative as the address was zeroed from allocation, instead of from overwriting the MAC with a unique hardware address. The correct check for whether bind() has altered the MAC is done with is_zero_ether_addr Signed-off-by: Oliver Neukum Reported-by: Greg Thelen Diagnosed-by: John Sperbeck Fixes: bab8eb0dd4cb9 ("usbnet: modern method to get random MAC") Link: https://patch.msgid.link/20241017071849.389636-1-oneukum@suse.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 6b7ce8ee01c33c380aaa5077ff25215492e7eb0e Author: Wang Hai Date: Tue Oct 15 22:48:02 2024 +0800 be2net: fix potential memory leak in be_xmit() [ Upstream commit e4dd8bfe0f6a23acd305f9b892c00899089bd621 ] The be_xmit() returns NETDEV_TX_OK without freeing skb in case of be_xmit_enqueue() fails, add dev_kfree_skb_any() to fix it. Fixes: 760c295e0e8d ("be2net: Support for OS2BMC.") Signed-off-by: Wang Hai Reviewed-by: Simon Horman Reviewed-by: Kalesh AP Message-ID: <20241015144802.12150-1-wanghai38@huawei.com> Signed-off-by: Andrew Lunn Signed-off-by: Sasha Levin commit 8d5b20fbc548650019afa96822b6a33ea4ec8aa5 Author: Wang Hai Date: Tue Oct 15 22:41:48 2024 +0800 net/sun3_82586: fix potential memory leak in sun3_82586_send_packet() [ Upstream commit 2cb3f56e827abb22c4168ad0c1bbbf401bb2f3b8 ] The sun3_82586_send_packet() returns NETDEV_TX_OK without freeing skb in case of skb->len being too long, add dev_kfree_skb() to fix it. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Wang Hai Reviewed-by: Simon Horman Message-ID: <20241015144148.7918-1-wanghai38@huawei.com> Signed-off-by: Andrew Lunn Signed-off-by: Sasha Levin commit 5e3231b352725ff4a3a0095e6035af674f2d8725 Author: Leo Yan Date: Mon Oct 7 15:47:24 2024 +0100 tracing: Consider the NULL character when validating the event length [ Upstream commit 0b6e2e22cb23105fcb171ab92f0f7516c69c8471 ] strlen() returns a string length excluding the null byte. If the string length equals to the maximum buffer length, the buffer will have no space for the NULL terminating character. This commit checks this condition and returns failure for it. Link: https://lore.kernel.org/all/20241007144724.920954-1-leo.yan@arm.com/ Fixes: dec65d79fd26 ("tracing/probe: Check event name length correctly") Signed-off-by: Leo Yan Reviewed-by: Steven Rostedt (Google) Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Sasha Levin commit 8bbfbf681e2850f0d6e89bdc7637c70d45fd4a68 Author: Dave Kleikamp Date: Tue Oct 22 09:40:37 2024 -0500 jfs: Fix sanity check in dbMount [ Upstream commit 67373ca8404fe57eb1bb4b57f314cff77ce54932 ] MAXAG is a legitimate value for bmp->db_numag Fixes: e63866a47556 ("jfs: fix out-of-bounds in dbNextAG() and diAlloc()") Signed-off-by: Dave Kleikamp Signed-off-by: Sasha Levin commit 417bd613bdbe791549f7687bb1b9b8012ff111c2 Author: Gianfranco Trad Date: Wed Sep 25 09:46:15 2024 +0200 udf: fix uninit-value use in udf_get_fileshortad [ Upstream commit 264db9d666ad9a35075cc9ed9ec09d021580fbb1 ] Check for overflow when computing alen in udf_current_aext to mitigate later uninit-value use in udf_get_fileshortad KMSAN bug[1]. After applying the patch reproducer did not trigger any issue[2]. [1] https://syzkaller.appspot.com/bug?extid=8901c4560b7ab5c2f9df [2] https://syzkaller.appspot.com/x/log.txt?x=10242227980000 Reported-by: syzbot+8901c4560b7ab5c2f9df@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=8901c4560b7ab5c2f9df Tested-by: syzbot+8901c4560b7ab5c2f9df@syzkaller.appspotmail.com Suggested-by: Jan Kara Signed-off-by: Gianfranco Trad Signed-off-by: Jan Kara Link: https://patch.msgid.link/20240925074613.8475-3-gianf.trad@gmail.com Signed-off-by: Sasha Levin commit 02c86c5d5ef4bbba17d38859c74872825f536617 Author: Hans de Goede Date: Tue Aug 27 12:45:23 2024 +0200 drm/vboxvideo: Replace fake VLA at end of vbva_mouse_pointer_shape with real VLA [ Upstream commit d92b90f9a54d9300a6e883258e79f36dab53bfae ] Replace the fake VLA at end of the vbva_mouse_pointer_shape shape with a real VLA to fix a "memcpy: detected field-spanning write error" warning: [ 13.319813] memcpy: detected field-spanning write (size 16896) of single field "p->data" at drivers/gpu/drm/vboxvideo/hgsmi_base.c:154 (size 4) [ 13.319841] WARNING: CPU: 0 PID: 1105 at drivers/gpu/drm/vboxvideo/hgsmi_base.c:154 hgsmi_update_pointer_shape+0x192/0x1c0 [vboxvideo] [ 13.320038] Call Trace: [ 13.320173] hgsmi_update_pointer_shape [vboxvideo] [ 13.320184] vbox_cursor_atomic_update [vboxvideo] Note as mentioned in the added comment it seems the original length calculation for the allocated and send hgsmi buffer is 4 bytes too large. Changing this is not the goal of this patch, so this behavior is kept. Signed-off-by: Hans de Goede Reviewed-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20240827104523.17442-1-hdegoede@redhat.com Signed-off-by: Sasha Levin commit c491ce22f99838bec3d3840815d6e233b3123a8f Author: Nico Boehr Date: Tue Sep 17 17:18:33 2024 +0200 KVM: s390: gaccess: Check if guest address is in memslot [ Upstream commit e8061f06185be0a06a73760d6526b8b0feadfe52 ] Previously, access_guest_page() did not check whether the given guest address is inside of a memslot. This is not a problem, since kvm_write_guest_page/kvm_read_guest_page return -EFAULT in this case. However, -EFAULT is also returned when copy_to/from_user fails. When emulating a guest instruction, the address being outside a memslot usually means that an addressing exception should be injected into the guest. Failure in copy_to/from_user however indicates that something is wrong in userspace and hence should be handled there. To be able to distinguish these two cases, return PGM_ADDRESSING in access_guest_page() when the guest address is outside guest memory. In access_guest_real(), populate vcpu->arch.pgm.code such that kvm_s390_inject_prog_cond() can be used in the caller for injecting into the guest (if applicable). Since this adds a new return value to access_guest_page(), we need to make sure that other callers are not confused by the new positive return value. There are the following users of access_guest_page(): - access_guest_with_key() does the checking itself (in guest_range_to_gpas()), so this case should never happen. Even if, the handling is set up properly. - access_guest_real() just passes the return code to its callers, which are: - read_guest_real() - see below - write_guest_real() - see below There are the following users of read_guest_real(): - ar_translation() in gaccess.c which already returns PGM_* - setup_apcb10(), setup_apcb00(), setup_apcb11() in vsie.c which always return -EFAULT on read_guest_read() nonzero return - no change - shadow_crycb(), handle_stfle() always present this as validity, this could be handled better but doesn't change current behaviour - no change There are the following users of write_guest_real(): - kvm_s390_store_status_unloaded() always returns -EFAULT on write_guest_real() failure. Fixes: 2293897805c2 ("KVM: s390: add architecture compliant guest access functions") Cc: stable@vger.kernel.org Signed-off-by: Nico Boehr Reviewed-by: Heiko Carstens Link: https://lore.kernel.org/r/20240917151904.74314-2-nrb@linux.ibm.com Acked-by: Janosch Frank Signed-off-by: Heiko Carstens Signed-off-by: Sasha Levin commit f334578c684e6daee5dfbdae4cb388f67191d8ef Author: Janis Schoetterl-Glausch Date: Fri Nov 26 17:45:49 2021 +0100 KVM: s390: gaccess: Cleanup access to guest pages [ Upstream commit bad13799e0305deb258372b7298a86be4c78aaba ] Introduce a helper function for guest frame access. Signed-off-by: Janis Schoetterl-Glausch Reviewed-by: Janosch Frank Reviewed-by: David Hildenbrand Reviewed-by: Claudio Imbrenda Message-Id: <20211126164549.7046-4-scgl@linux.ibm.com> Signed-off-by: Janosch Frank Stable-dep-of: e8061f06185b ("KVM: s390: gaccess: Check if guest address is in memslot") Signed-off-by: Sasha Levin commit 8a2e8829145033f1439af55b3b44a6a790b1143a Author: Janis Schoetterl-Glausch Date: Fri Nov 26 17:45:48 2021 +0100 KVM: s390: gaccess: Refactor access address range check [ Upstream commit 7faa543df19bf62d4583a64d3902705747f2ad29 ] Do not round down the first address to the page boundary, just translate it normally, which gives the value we care about in the first place. Given this, translating a single address is just the special case of translating a range spanning a single page. Make the output optional, so the function can be used to just check a range. Signed-off-by: Janis Schoetterl-Glausch Reviewed-by: Janosch Frank Reviewed-by: Claudio Imbrenda Message-Id: <20211126164549.7046-3-scgl@linux.ibm.com> Signed-off-by: Janosch Frank Stable-dep-of: e8061f06185b ("KVM: s390: gaccess: Check if guest address is in memslot") Signed-off-by: Sasha Levin commit f1f3615bc308527205273352c0eec0e3162e45ca Author: Janis Schoetterl-Glausch Date: Fri Nov 26 17:45:47 2021 +0100 KVM: s390: gaccess: Refactor gpa and length calculation [ Upstream commit 416e7f0c9d613bf84e182eba9547ae8f9f5bfa4c ] Improve readability by renaming the length variable and not calculating the offset manually. Signed-off-by: Janis Schoetterl-Glausch Reviewed-by: Janosch Frank Reviewed-by: David Hildenbrand Reviewed-by: Claudio Imbrenda Message-Id: <20211126164549.7046-2-scgl@linux.ibm.com> Signed-off-by: Janosch Frank Stable-dep-of: e8061f06185b ("KVM: s390: gaccess: Check if guest address is in memslot") Signed-off-by: Sasha Levin commit e6ab336213918575124d6db43dc5d3554526242e Author: Mark Rutland Date: Tue Oct 8 16:58:48 2024 +0100 arm64: probes: Fix uprobes for big-endian kernels [ Upstream commit 13f8f1e05f1dc36dbba6cba0ae03354c0dafcde7 ] The arm64 uprobes code is broken for big-endian kernels as it doesn't convert the in-memory instruction encoding (which is always little-endian) into the kernel's native endianness before analyzing and simulating instructions. This may result in a few distinct problems: * The kernel may may erroneously reject probing an instruction which can safely be probed. * The kernel may erroneously erroneously permit stepping an instruction out-of-line when that instruction cannot be stepped out-of-line safely. * The kernel may erroneously simulate instruction incorrectly dur to interpretting the byte-swapped encoding. The endianness mismatch isn't caught by the compiler or sparse because: * The arch_uprobe::{insn,ixol} fields are encoded as arrays of u8, so the compiler and sparse have no idea these contain a little-endian 32-bit value. The core uprobes code populates these with a memcpy() which similarly does not handle endianness. * While the uprobe_opcode_t type is an alias for __le32, both arch_uprobe_analyze_insn() and arch_uprobe_skip_sstep() cast from u8[] to the similarly-named probe_opcode_t, which is an alias for u32. Hence there is no endianness conversion warning. Fix this by changing the arch_uprobe::{insn,ixol} fields to __le32 and adding the appropriate __le32_to_cpu() conversions prior to consuming the instruction encoding. The core uprobes copies these fields as opaque ranges of bytes, and so is unaffected by this change. At the same time, remove MAX_UINSN_BYTES and consistently use AARCH64_INSN_SIZE for clarity. Tested with the following: | #include | #include | | #define noinline __attribute__((noinline)) | | static noinline void *adrp_self(void) | { | void *addr; | | asm volatile( | " adrp %x0, adrp_self\n" | " add %x0, %x0, :lo12:adrp_self\n" | : "=r" (addr)); | } | | | int main(int argc, char *argv) | { | void *ptr = adrp_self(); | bool equal = (ptr == adrp_self); | | printf("adrp_self => %p\n" | "adrp_self() => %p\n" | "%s\n", | adrp_self, ptr, equal ? "EQUAL" : "NOT EQUAL"); | | return 0; | } .... where the adrp_self() function was compiled to: | 00000000004007e0 : | 4007e0: 90000000 adrp x0, 400000 <__ehdr_start> | 4007e4: 911f8000 add x0, x0, #0x7e0 | 4007e8: d65f03c0 ret Before this patch, the ADRP is not recognized, and is assumed to be steppable, resulting in corruption of the result: | # ./adrp-self | adrp_self => 0x4007e0 | adrp_self() => 0x4007e0 | EQUAL | # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events | # echo 1 > /sys/kernel/tracing/events/uprobes/enable | # ./adrp-self | adrp_self => 0x4007e0 | adrp_self() => 0xffffffffff7e0 | NOT EQUAL After this patch, the ADRP is correctly recognized and simulated: | # ./adrp-self | adrp_self => 0x4007e0 | adrp_self() => 0x4007e0 | EQUAL | # | # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events | # echo 1 > /sys/kernel/tracing/events/uprobes/enable | # ./adrp-self | adrp_self => 0x4007e0 | adrp_self() => 0x4007e0 | EQUAL Fixes: 9842ceae9fa8 ("arm64: Add uprobe support") Cc: stable@vger.kernel.org Signed-off-by: Mark Rutland Cc: Catalin Marinas Cc: Will Deacon Link: https://lore.kernel.org/r/20241008155851.801546-4-mark.rutland@arm.com Signed-off-by: Will Deacon Signed-off-by: Sasha Levin commit 5aa6cd3130c80f17630a214c2e25091f0c4b5e9a Author: junhua huang Date: Fri Dec 2 15:11:10 2022 +0800 arm64:uprobe fix the uprobe SWBP_INSN in big-endian [ Upstream commit 60f07e22a73d318cddaafa5ef41a10476807cc07 ] We use uprobe in aarch64_be, which we found the tracee task would exit due to SIGILL when we enable the uprobe trace. We can see the replace inst from uprobe is not correct in aarch big-endian. As in Armv8-A, instruction fetches are always treated as little-endian, we should treat the UPROBE_SWBP_INSN as little-endian。 The test case is as following。 bash-4.4# ./mqueue_test_aarchbe 1 1 2 1 10 > /dev/null & bash-4.4# cd /sys/kernel/debug/tracing/ bash-4.4# echo 'p:test /mqueue_test_aarchbe:0xc30 %x0 %x1' > uprobe_events bash-4.4# echo 1 > events/uprobes/enable bash-4.4# bash-4.4# ps PID TTY TIME CMD 140 ? 00:00:01 bash 237 ? 00:00:00 ps [1]+ Illegal instruction ./mqueue_test_aarchbe 1 1 2 1 100 > /dev/null which we debug use gdb as following: bash-4.4# gdb attach 155 (gdb) disassemble send Dump of assembler code for function send: 0x0000000000400c30 <+0>: .inst 0xa00020d4 ; undefined 0x0000000000400c34 <+4>: mov x29, sp 0x0000000000400c38 <+8>: str w0, [sp, #28] 0x0000000000400c3c <+12>: strb w1, [sp, #27] 0x0000000000400c40 <+16>: str xzr, [sp, #40] 0x0000000000400c44 <+20>: str xzr, [sp, #48] 0x0000000000400c48 <+24>: add x0, sp, #0x1b 0x0000000000400c4c <+28>: mov w3, #0x0 // #0 0x0000000000400c50 <+32>: mov x2, #0x1 // #1 0x0000000000400c54 <+36>: mov x1, x0 0x0000000000400c58 <+40>: ldr w0, [sp, #28] 0x0000000000400c5c <+44>: bl 0x405e10 0x0000000000400c60 <+48>: str w0, [sp, #60] 0x0000000000400c64 <+52>: ldr w0, [sp, #60] 0x0000000000400c68 <+56>: ldp x29, x30, [sp], #64 0x0000000000400c6c <+60>: ret End of assembler dump. (gdb) info b No breakpoints or watchpoints. (gdb) c Continuing. Program received signal SIGILL, Illegal instruction. 0x0000000000400c30 in send () (gdb) x/10x 0x400c30 0x400c30 : 0xd42000a0 0xfd030091 0xe01f00b9 0xe16f0039 0x400c40 : 0xff1700f9 0xff1b00f9 0xe06f0091 0x03008052 0x400c50 : 0x220080d2 0xe10300aa (gdb) disassemble 0x400c30 Dump of assembler code for function send: => 0x0000000000400c30 <+0>: .inst 0xa00020d4 ; undefined 0x0000000000400c34 <+4>: mov x29, sp 0x0000000000400c38 <+8>: str w0, [sp, #28] 0x0000000000400c3c <+12>: strb w1, [sp, #27] 0x0000000000400c40 <+16>: str xzr, [sp, #40] Signed-off-by: junhua huang Link: https://lore.kernel.org/r/202212021511106844809@zte.com.cn Signed-off-by: Will Deacon Stable-dep-of: 13f8f1e05f1d ("arm64: probes: Fix uprobes for big-endian kernels") Signed-off-by: Sasha Levin commit 2c439470b23d78095a0d2f923342df58b155f669 Author: Ye Bin Date: Mon Oct 14 17:07:08 2024 +0800 Bluetooth: bnep: fix wild-memory-access in proto_unregister [ Upstream commit 64a90991ba8d4e32e3173ddd83d0b24167a5668c ] There's issue as follows: KASAN: maybe wild-memory-access in range [0xdead...108-0xdead...10f] CPU: 3 UID: 0 PID: 2805 Comm: rmmod Tainted: G W RIP: 0010:proto_unregister+0xee/0x400 Call Trace: __do_sys_delete_module+0x318/0x580 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f As bnep_init() ignore bnep_sock_init()'s return value, and bnep_sock_init() will cleanup all resource. Then when remove bnep module will call bnep_sock_cleanup() to cleanup sock's resource. To solve above issue just return bnep_sock_init()'s return value in bnep_exit(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Ye Bin Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit 2c15c4133d00f5da632fce60ed013fc31aa9aa58 Author: Thadeu Lima de Souza Cascardo Date: Fri Oct 4 09:37:38 2024 -0300 usb: typec: altmode should keep reference to parent [ Upstream commit befab3a278c59db0cc88c8799638064f6d3fd6f8 ] The altmode device release refers to its parent device, but without keeping a reference to it. When registering the altmode, get a reference to the parent and put it in the release function. Before this fix, when using CONFIG_DEBUG_KOBJECT_RELEASE, we see issues like this: [ 43.572860] kobject: 'port0.0' (ffff8880057ba008): kobject_release, parent 0000000000000000 (delayed 3000) [ 43.573532] kobject: 'port0.1' (ffff8880057bd008): kobject_release, parent 0000000000000000 (delayed 1000) [ 43.574407] kobject: 'port0' (ffff8880057b9008): kobject_release, parent 0000000000000000 (delayed 3000) [ 43.575059] kobject: 'port1.0' (ffff8880057ca008): kobject_release, parent 0000000000000000 (delayed 4000) [ 43.575908] kobject: 'port1.1' (ffff8880057c9008): kobject_release, parent 0000000000000000 (delayed 4000) [ 43.576908] kobject: 'typec' (ffff8880062dbc00): kobject_release, parent 0000000000000000 (delayed 4000) [ 43.577769] kobject: 'port1' (ffff8880057bf008): kobject_release, parent 0000000000000000 (delayed 3000) [ 46.612867] ================================================================== [ 46.613402] BUG: KASAN: slab-use-after-free in typec_altmode_release+0x38/0x129 [ 46.614003] Read of size 8 at addr ffff8880057b9118 by task kworker/2:1/48 [ 46.614538] [ 46.614668] CPU: 2 UID: 0 PID: 48 Comm: kworker/2:1 Not tainted 6.12.0-rc1-00138-gedbae730ad31 #535 [ 46.615391] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 [ 46.616042] Workqueue: events kobject_delayed_cleanup [ 46.616446] Call Trace: [ 46.616648] [ 46.616820] dump_stack_lvl+0x5b/0x7c [ 46.617112] ? typec_altmode_release+0x38/0x129 [ 46.617470] print_report+0x14c/0x49e [ 46.617769] ? rcu_read_unlock_sched+0x56/0x69 [ 46.618117] ? __virt_addr_valid+0x19a/0x1ab [ 46.618456] ? kmem_cache_debug_flags+0xc/0x1d [ 46.618807] ? typec_altmode_release+0x38/0x129 [ 46.619161] kasan_report+0x8d/0xb4 [ 46.619447] ? typec_altmode_release+0x38/0x129 [ 46.619809] ? process_scheduled_works+0x3cb/0x85f [ 46.620185] typec_altmode_release+0x38/0x129 [ 46.620537] ? process_scheduled_works+0x3cb/0x85f [ 46.620907] device_release+0xaf/0xf2 [ 46.621206] kobject_delayed_cleanup+0x13b/0x17a [ 46.621584] process_scheduled_works+0x4f6/0x85f [ 46.621955] ? __pfx_process_scheduled_works+0x10/0x10 [ 46.622353] ? hlock_class+0x31/0x9a [ 46.622647] ? lock_acquired+0x361/0x3c3 [ 46.622956] ? move_linked_works+0x46/0x7d [ 46.623277] worker_thread+0x1ce/0x291 [ 46.623582] ? __kthread_parkme+0xc8/0xdf [ 46.623900] ? __pfx_worker_thread+0x10/0x10 [ 46.624236] kthread+0x17e/0x190 [ 46.624501] ? kthread+0xfb/0x190 [ 46.624756] ? __pfx_kthread+0x10/0x10 [ 46.625015] ret_from_fork+0x20/0x40 [ 46.625268] ? __pfx_kthread+0x10/0x10 [ 46.625532] ret_from_fork_asm+0x1a/0x30 [ 46.625805] [ 46.625953] [ 46.626056] Allocated by task 678: [ 46.626287] kasan_save_stack+0x24/0x44 [ 46.626555] kasan_save_track+0x14/0x2d [ 46.626811] __kasan_kmalloc+0x3f/0x4d [ 46.627049] __kmalloc_noprof+0x1bf/0x1f0 [ 46.627362] typec_register_port+0x23/0x491 [ 46.627698] cros_typec_probe+0x634/0xbb6 [ 46.628026] platform_probe+0x47/0x8c [ 46.628311] really_probe+0x20a/0x47d [ 46.628605] device_driver_attach+0x39/0x72 [ 46.628940] bind_store+0x87/0xd7 [ 46.629213] kernfs_fop_write_iter+0x1aa/0x218 [ 46.629574] vfs_write+0x1d6/0x29b [ 46.629856] ksys_write+0xcd/0x13b [ 46.630128] do_syscall_64+0xd4/0x139 [ 46.630420] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 46.630820] [ 46.630946] Freed by task 48: [ 46.631182] kasan_save_stack+0x24/0x44 [ 46.631493] kasan_save_track+0x14/0x2d [ 46.631799] kasan_save_free_info+0x3f/0x4d [ 46.632144] __kasan_slab_free+0x37/0x45 [ 46.632474] kfree+0x1d4/0x252 [ 46.632725] device_release+0xaf/0xf2 [ 46.633017] kobject_delayed_cleanup+0x13b/0x17a [ 46.633388] process_scheduled_works+0x4f6/0x85f [ 46.633764] worker_thread+0x1ce/0x291 [ 46.634065] kthread+0x17e/0x190 [ 46.634324] ret_from_fork+0x20/0x40 [ 46.634621] ret_from_fork_asm+0x1a/0x30 Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes") Signed-off-by: Thadeu Lima de Souza Cascardo Reviewed-by: Heikki Krogerus Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20241004123738.2964524-1-cascardo@igalia.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 6f0516ef1290da24b85461ed08a0938af7415e49 Author: Paulo Alcantara Date: Tue Oct 15 19:04:04 2024 -0300 smb: client: fix OOBs when building SMB2_IOCTL request [ Upstream commit 1ab60323c5201bef25f2a3dc0ccc404d9aca77f1 ] When using encryption, either enforced by the server or when using 'seal' mount option, the client will squash all compound request buffers down for encryption into a single iov in smb2_set_next_command(). SMB2_ioctl_init() allocates a small buffer (448 bytes) to hold the SMB2_IOCTL request in the first iov, and if the user passes an input buffer that is greater than 328 bytes, smb2_set_next_command() will end up writing off the end of @rqst->iov[0].iov_base as shown below: mount.cifs //srv/share /mnt -o ...,seal ln -s $(perl -e "print('a')for 1..1024") /mnt/link BUG: KASAN: slab-out-of-bounds in smb2_set_next_command.cold+0x1d6/0x24c [cifs] Write of size 4116 at addr ffff8881148fcab8 by task ln/859 CPU: 1 UID: 0 PID: 859 Comm: ln Not tainted 6.12.0-rc3 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 Call Trace: dump_stack_lvl+0x5d/0x80 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] print_report+0x156/0x4d9 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] ? __virt_addr_valid+0x145/0x310 ? __phys_addr+0x46/0x90 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] kasan_report+0xda/0x110 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] kasan_check_range+0x10f/0x1f0 __asan_memcpy+0x3c/0x60 smb2_set_next_command.cold+0x1d6/0x24c [cifs] smb2_compound_op+0x238c/0x3840 [cifs] ? kasan_save_track+0x14/0x30 ? kasan_save_free_info+0x3b/0x70 ? vfs_symlink+0x1a1/0x2c0 ? do_symlinkat+0x108/0x1c0 ? __pfx_smb2_compound_op+0x10/0x10 [cifs] ? kmem_cache_free+0x118/0x3e0 ? cifs_get_writable_path+0xeb/0x1a0 [cifs] smb2_get_reparse_inode+0x423/0x540 [cifs] ? __pfx_smb2_get_reparse_inode+0x10/0x10 [cifs] ? rcu_is_watching+0x20/0x50 ? __kmalloc_noprof+0x37c/0x480 ? smb2_create_reparse_symlink+0x257/0x490 [cifs] ? smb2_create_reparse_symlink+0x38f/0x490 [cifs] smb2_create_reparse_symlink+0x38f/0x490 [cifs] ? __pfx_smb2_create_reparse_symlink+0x10/0x10 [cifs] ? find_held_lock+0x8a/0xa0 ? hlock_class+0x32/0xb0 ? __build_path_from_dentry_optional_prefix+0x19d/0x2e0 [cifs] cifs_symlink+0x24f/0x960 [cifs] ? __pfx_make_vfsuid+0x10/0x10 ? __pfx_cifs_symlink+0x10/0x10 [cifs] ? make_vfsgid+0x6b/0xc0 ? generic_permission+0x96/0x2d0 vfs_symlink+0x1a1/0x2c0 do_symlinkat+0x108/0x1c0 ? __pfx_do_symlinkat+0x10/0x10 ? strncpy_from_user+0xaa/0x160 __x64_sys_symlinkat+0xb9/0xf0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f08d75c13bb Reported-by: David Howells Fixes: e77fe73c7e38 ("cifs: we can not use small padding iovs together with encryption") Signed-off-by: Paulo Alcantara (Red Hat) Signed-off-by: Steve French Signed-off-by: Sasha Levin commit 0d2bd44bfe06885762bbe89d0555204acdd9b84a Author: Eric Dumazet Date: Fri Oct 11 17:12:17 2024 +0000 genetlink: hold RCU in genlmsg_mcast() [ Upstream commit 56440d7ec28d60f8da3bfa09062b3368ff9b16db ] While running net selftests with CONFIG_PROVE_RCU_LIST=y I saw one lockdep splat [1]. genlmsg_mcast() uses for_each_net_rcu(), and must therefore hold RCU. Instead of letting all callers guard genlmsg_multicast_allns() with a rcu_read_lock()/rcu_read_unlock() pair, do it in genlmsg_mcast(). This also means the @flags parameter is useless, we need to always use GFP_ATOMIC. [1] [10882.424136] ============================= [10882.424166] WARNING: suspicious RCU usage [10882.424309] 6.12.0-rc2-virtme #1156 Not tainted [10882.424400] ----------------------------- [10882.424423] net/netlink/genetlink.c:1940 RCU-list traversed in non-reader section!! [10882.424469] other info that might help us debug this: [10882.424500] rcu_scheduler_active = 2, debug_locks = 1 [10882.424744] 2 locks held by ip/15677: [10882.424791] #0: ffffffffb6b491b0 (cb_lock){++++}-{3:3}, at: genl_rcv (net/netlink/genetlink.c:1219) [10882.426334] #1: ffffffffb6b49248 (genl_mutex){+.+.}-{3:3}, at: genl_rcv_msg (net/netlink/genetlink.c:61 net/netlink/genetlink.c:57 net/netlink/genetlink.c:1209) [10882.426465] stack backtrace: [10882.426805] CPU: 14 UID: 0 PID: 15677 Comm: ip Not tainted 6.12.0-rc2-virtme #1156 [10882.426919] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [10882.427046] Call Trace: [10882.427131] [10882.427244] dump_stack_lvl (lib/dump_stack.c:123) [10882.427335] lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822) [10882.427387] genlmsg_multicast_allns (net/netlink/genetlink.c:1940 (discriminator 7) net/netlink/genetlink.c:1977 (discriminator 7)) [10882.427436] l2tp_tunnel_notify.constprop.0 (net/l2tp/l2tp_netlink.c:119) l2tp_netlink [10882.427683] l2tp_nl_cmd_tunnel_create (net/l2tp/l2tp_netlink.c:253) l2tp_netlink [10882.427748] genl_family_rcv_msg_doit (net/netlink/genetlink.c:1115) [10882.427834] genl_rcv_msg (net/netlink/genetlink.c:1195 net/netlink/genetlink.c:1210) [10882.427877] ? __pfx_l2tp_nl_cmd_tunnel_create (net/l2tp/l2tp_netlink.c:186) l2tp_netlink [10882.427927] ? __pfx_genl_rcv_msg (net/netlink/genetlink.c:1201) [10882.427959] netlink_rcv_skb (net/netlink/af_netlink.c:2551) [10882.428069] genl_rcv (net/netlink/genetlink.c:1220) [10882.428095] netlink_unicast (net/netlink/af_netlink.c:1332 net/netlink/af_netlink.c:1357) [10882.428140] netlink_sendmsg (net/netlink/af_netlink.c:1901) [10882.428210] ____sys_sendmsg (net/socket.c:729 (discriminator 1) net/socket.c:744 (discriminator 1) net/socket.c:2607 (discriminator 1)) Fixes: 33f72e6f0c67 ("l2tp : multicast notification to the registered listeners") Signed-off-by: Eric Dumazet Cc: James Chapman Cc: Tom Parkin Cc: Johannes Berg Link: https://patch.msgid.link/20241011171217.3166614-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 31701ef0c4547973991ff63596c927f841dfd133 Author: Wang Hai Date: Mon Oct 14 22:51:15 2024 +0800 net: systemport: fix potential memory leak in bcm_sysport_xmit() [ Upstream commit c401ed1c709948e57945485088413e1bb5e94bd1 ] The bcm_sysport_xmit() returns NETDEV_TX_OK without freeing skb in case of dma_map_single() fails, add dev_kfree_skb() to fix it. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Wang Hai Link: https://patch.msgid.link/20241014145115.44977-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 389bdb093fcfe7cecf3e56d59e150aeadc59c3d4 Author: Wang Hai Date: Sat Oct 12 19:04:34 2024 +0800 net: ethernet: aeroflex: fix potential memory leak in greth_start_xmit_gbit() [ Upstream commit cf57b5d7a2aad456719152ecd12007fe031628a3 ] The greth_start_xmit_gbit() returns NETDEV_TX_OK without freeing skb in case of skb->len being too long, add dev_kfree_skb() to fix it. Fixes: d4c41139df6e ("net: Add Aeroflex Gaisler 10/100/1G Ethernet MAC driver") Signed-off-by: Wang Hai Reviewed-by: Gerhard Engleder Link: https://patch.msgid.link/20241012110434.49265-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 37441f39eed9752eb35e063ae61c9a7b7074fe4b Author: Sabrina Dubroca Date: Fri Oct 11 17:16:37 2024 +0200 macsec: don't increment counters for an unrelated SA [ Upstream commit cf58aefb1332db322060cad4a330d5f9292b0f41 ] On RX, we shouldn't be incrementing the stats for an arbitrary SA in case the actual SA hasn't been set up. Those counters are intended to track packets for their respective AN when the SA isn't currently configured. Due to the way MACsec is implemented, we don't keep counters unless the SA is configured, so we can't track those packets, and those counters will remain at 0. The RXSC's stats keeps track of those packets without telling us which AN they belonged to. We could add counters for non-existent SAs, and then find a way to integrate them in the dump to userspace, but I don't think it's worth the effort. Fixes: 91ec9bd57f35 ("macsec: Fix traffic counters/statistics") Reported-by: Paolo Abeni Signed-off-by: Sabrina Dubroca Link: https://patch.msgid.link/f5ac92aaa5b89343232615f4c03f9f95042c6aa0.1728657709.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit ec674722c4e36b9d016d2c027880d461f9cd491a Author: Jonathan Marek Date: Mon Oct 7 01:01:49 2024 -0400 drm/msm/dsi: fix 32-bit signed integer extension in pclk_rate calculation [ Upstream commit 358b762400bd94db2a14a72dfcef74c7da6bd845 ] When (mode->clock * 1000) is larger than (1<<31), int to unsigned long conversion will sign extend the int to 64 bits and the pclk_rate value will be incorrect. Fix this by making the result of the multiplication unsigned. Note that above (1<<32) would still be broken and require more changes, but its unlikely anyone will need that anytime soon. Fixes: c4d8cfe516dc ("drm/msm/dsi: add implementation for helper functions") Signed-off-by: Jonathan Marek Reviewed-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/618434/ Link: https://lore.kernel.org/r/20241007050157.26855-2-jonathan@marek.ca Signed-off-by: Abhinav Kumar Signed-off-by: Sasha Levin commit 825ffa86c3fc6196b186f70d6a951491b8b8879c Author: Kalesh AP Date: Tue Oct 8 00:41:36 2024 -0700 RDMA/bnxt_re: Return more meaningful error [ Upstream commit 98647df0178df215b8239c5c365537283b2852a6 ] When the HWRM command fails, driver currently returns -EFAULT(Bad address). This does not look correct. Modified to return -EIO(I/O error). Fixes: cc1ec769b87c ("RDMA/bnxt_re: Fixing the Control path command and response handling") Fixes: 65288a22ddd8 ("RDMA/bnxt_re: use shadow qd while posting non blocking rcfw command") Link: https://patch.msgid.link/r/1728373302-19530-5-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Kalesh AP Signed-off-by: Selvin Xavier Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit 772d5834e4357c87d04896e5afe6f79d901eaf3e Author: Xin Long Date: Wed Oct 9 14:47:13 2024 -0400 ipv4: give an IPv4 dev to blackhole_netdev [ Upstream commit 22600596b6756b166fd052d5facb66287e6f0bad ] After commit 8d7017fd621d ("blackhole_netdev: use blackhole_netdev to invalidate dst entries"), blackhole_netdev was introduced to invalidate dst cache entries on the TX path whenever the cache times out or is flushed. When two UDP sockets (sk1 and sk2) send messages to the same destination simultaneously, they are using the same dst cache. If the dst cache is invalidated on one path (sk2) while the other (sk1) is still transmitting, sk1 may try to use the invalid dst entry. CPU1 CPU2 udp_sendmsg(sk1) udp_sendmsg(sk2) udp_send_skb() ip_output() <--- dst timeout or flushed dst_dev_put() ip_finish_output2() ip_neigh_for_gw() This results in a scenario where ip_neigh_for_gw() returns -EINVAL because blackhole_dev lacks an in_dev, which is needed to initialize the neigh in arp_constructor(). This error is then propagated back to userspace, breaking the UDP application. The patch fixes this issue by assigning an in_dev to blackhole_dev for IPv4, similar to what was done for IPv6 in commit e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"). This ensures that even when the dst entry is invalidated with blackhole_dev, it will not fail to create the neigh entry. As devinet_init() is called ealier than blackhole_netdev_init() in system booting, it can not assign the in_dev to blackhole_dev in devinet_init(). As Paolo suggested, add a separate late_initcall() in devinet.c to ensure inet_blackhole_dev_init() is called after blackhole_netdev_init(). Fixes: 8d7017fd621d ("blackhole_netdev: use blackhole_netdev to invalidate dst entries") Signed-off-by: Xin Long Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/3000792d45ca44e16c785ebe2b092e610e5b3df1.1728499633.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit d7c4fd4902b0ef438cd984c303fbb14061d06d46 Author: Anumula Murali Mohan Reddy Date: Mon Oct 7 18:53:11 2024 +0530 RDMA/cxgb4: Fix RDMA_CM_EVENT_UNREACHABLE error for iWARP [ Upstream commit c659b405b82ead335bee6eb33f9691bf718e21e8 ] ip_dev_find() always returns real net_device address, whether traffic is running on a vlan or real device, if traffic is over vlan, filling endpoint struture with real ndev and an attempt to send a connect request will results in RDMA_CM_EVENT_UNREACHABLE error. This patch fixes the issue by using vlan_dev_real_dev(). Fixes: 830662f6f032 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address") Link: https://patch.msgid.link/r/20241007132311.70593-1-anumula@chelsio.com Signed-off-by: Anumula Murali Mohan Reddy Signed-off-by: Potnuri Bharat Teja Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit fc2f42e4fe1b79f7f65b046af6545a781356846f Author: Florian Klink Date: Tue Jul 16 02:03:11 2024 +0300 ARM: dts: bcm2837-rpi-cm3-io3: Fix HDMI hpd-gpio pin [ Upstream commit dc7785e4723510616d776862ddb4c08857a1bdb2 ] HDMI_HPD_N_1V8 is connected to GPIO pin 0, not 1. This fixes HDMI hotplug/output detection. See https://datasheets.raspberrypi.com/cm/cm3-schematics.pdf Signed-off-by: Florian Klink Reviewed-by: Stefan Wahren Link: https://lore.kernel.org/r/20240715230311.685641-1-flokli@flokli.de Reviewed-by: Stefan Wahren Fixes: a54fe8a6cf66 ("ARM: dts: add Raspberry Pi Compute Module 3 and IO board") Signed-off-by: Florian Fainelli Signed-off-by: Sasha Levin commit 17648b72cb4feb9c4d98d60985c6b13d24e266b0 Author: Saravanan Vajravel Date: Wed Sep 18 20:05:57 2024 -0700 RDMA/bnxt_re: Fix incorrect AVID type in WQE structure [ Upstream commit 9ab20f76ae9fad55ebaf36bdff04aea1c2552374 ] Driver uses internal data structure to construct WQE frame. It used avid type as u16 which can accommodate up to 64K AVs. When outstanding AVID crosses 64K, driver truncates AVID and hence it uses incorrect AVID to WR. This leads to WR failure due to invalid AV ID and QP is moved to error state with reason set to 19 (INVALID AVID). When RDMA CM path is used, this issue hits QP1 and it is moved to error state Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://patch.msgid.link/r/1726715161-18941-3-git-send-email-selvin.xavier@broadcom.com Reviewed-by: Selvin Xavier Reviewed-by: Chandramohan Akula Signed-off-by: Saravanan Vajravel Signed-off-by: Kalesh AP Signed-off-by: Selvin Xavier Signed-off-by: Jason Gunthorpe Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin commit 7526339f91ddcd1d4db64a3905d611282ca36bf1 Author: Mathy Vanhoef Date: Sun May 30 15:32:26 2021 +0200 mac80211: Fix NULL ptr deref for injected rate info commit bddc0c411a45d3718ac535a070f349be8eca8d48 upstream. The commit cb17ed29a7a5 ("mac80211: parse radiotap header when selecting Tx queue") moved the code to validate the radiotap header from ieee80211_monitor_start_xmit to ieee80211_parse_tx_radiotap. This made is possible to share more code with the new Tx queue selection code for injected frames. But at the same time, it now required the call of ieee80211_parse_tx_radiotap at the beginning of functions which wanted to handle the radiotap header. And this broke the rate parser for radiotap header parser. The radiotap parser for rates is operating most of the time only on the data in the actual radiotap header. But for the 802.11a/b/g rates, it must also know the selected band from the chandef information. But this information is only written to the ieee80211_tx_info at the end of the ieee80211_monitor_start_xmit - long after ieee80211_parse_tx_radiotap was already called. The info->band information was therefore always 0 (NL80211_BAND_2GHZ) when the parser code tried to access it. For a 5GHz only device, injecting a frame with 802.11a rates would cause a NULL pointer dereference because local->hw.wiphy->bands[NL80211_BAND_2GHZ] would most likely have been NULL when the radiotap parser searched for the correct rate index of the driver. Cc: stable@vger.kernel.org Reported-by: Ben Greear Fixes: cb17ed29a7a5 ("mac80211: parse radiotap header when selecting Tx queue") Signed-off-by: Mathy Vanhoef [sven@narfation.org: added commit message] Signed-off-by: Sven Eckelmann Link: https://lore.kernel.org/r/20210530133226.40587-1-sven@narfation.org Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 9ff2d260b25df6fe1341a79113d88fecf6bd553e Author: Gao Xiang Date: Wed Dec 6 12:55:34 2023 +0800 erofs: fix lz4 inplace decompression commit 3c12466b6b7bf1e56f9b32c366a3d83d87afb4de upstream. Currently EROFS can map another compressed buffer for inplace decompression, that was used to handle the cases that some pages of compressed data are actually not in-place I/O. However, like most simple LZ77 algorithms, LZ4 expects the compressed data is arranged at the end of the decompressed buffer and it explicitly uses memmove() to handle overlapping: __________________________________________________________ |_ direction of decompression --> ____ |_ compressed data _| Although EROFS arranges compressed data like this, it typically maps two individual virtual buffers so the relative order is uncertain. Previously, it was hardly observed since LZ4 only uses memmove() for short overlapped literals and x86/arm64 memmove implementations seem to completely cover it up and they don't have this issue. Juhyung reported that EROFS data corruption can be found on a new Intel x86 processor. After some analysis, it seems that recent x86 processors with the new FSRM feature expose this issue with "rep movsb". Let's strictly use the decompressed buffer for lz4 inplace decompression for now. Later, as an useful improvement, we could try to tie up these two buffers together in the correct order. Reported-and-tested-by: Juhyung Park Closes: https://lore.kernel.org/r/CAD14+f2AVKf8Fa2OO1aAUdDNTDsVzzR6ctU_oJSmTyd6zSYR2Q@mail.gmail.com Fixes: 0ffd71bcc3a0 ("staging: erofs: introduce LZ4 decompression inplace") Fixes: 598162d05080 ("erofs: support decompress big pcluster for lz4 backend") Cc: stable # 5.4+ Tested-by: Yifan Zhao Signed-off-by: Gao Xiang Link: https://lore.kernel.org/r/20231206045534.3920847-1-hsiangkao@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman commit b4b3dc9e7e604be98a222e9f941f5e93798ca475 Author: Ryusuke Konishi Date: Fri Oct 4 12:35:31 2024 +0900 nilfs2: propagate directory read errors from nilfs_find_entry() commit 08cfa12adf888db98879dbd735bc741360a34168 upstream. Syzbot reported that a task hang occurs in vcs_open() during a fuzzing test for nilfs2. The root cause of this problem is that in nilfs_find_entry(), which searches for directory entries, ignores errors when loading a directory page/folio via nilfs_get_folio() fails. If the filesystem images is corrupted, and the i_size of the directory inode is large, and the directory page/folio is successfully read but fails the sanity check, for example when it is zero-filled, nilfs_check_folio() may continue to spit out error messages in bursts. Fix this issue by propagating the error to the callers when loading a page/folio fails in nilfs_find_entry(). The current interface of nilfs_find_entry() and its callers is outdated and cannot propagate error codes such as -EIO and -ENOMEM returned via nilfs_find_entry(), so fix it together. Link: https://lkml.kernel.org/r/20241004033640.6841-1-konishi.ryusuke@gmail.com Fixes: 2ba466d74ed7 ("nilfs2: directory entry operations") Signed-off-by: Ryusuke Konishi Reported-by: Lizhi Xu Closes: https://lkml.kernel.org/r/20240927013806.3577931-1-lizhi.xu@windriver.com Reported-by: syzbot+8a192e8d090fa9a31135@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=8a192e8d090fa9a31135 Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 4aa8948673dc395262301386aecda9f9b11af8f0 Author: Zhang Rui Date: Tue Oct 15 14:15:22 2024 +0800 x86/apic: Always explicitly disarm TSC-deadline timer commit ffd95846c6ec6cf1f93da411ea10d504036cab42 upstream. New processors have become pickier about the local APIC timer state before entering low power modes. These low power modes are used (for example) when you close your laptop lid and suspend. If you put your laptop in a bag and it is not in this low power mode, it is likely to get quite toasty while it quickly sucks the battery dry. The problem boils down to some CPUs' inability to power down until the CPU recognizes that the local APIC timer is shut down. The current kernel code works in one-shot and periodic modes but does not work for deadline mode. Deadline mode has been the supported and preferred mode on Intel CPUs for over a decade and uses an MSR to drive the timer instead of an APIC register. Disable the TSC Deadline timer in lapic_timer_shutdown() by writing to MSR_IA32_TSC_DEADLINE when in TSC-deadline mode. Also avoid writing to the initial-count register (APIC_TMICT) which is ignored in TSC-deadline mode. Note: The APIC_LVTT|=APIC_LVT_MASKED operation should theoretically be enough to tell the hardware that the timer will not fire in any of the timer modes. But mitigating AMD erratum 411[1] also requires clearing out APIC_TMICT. Solely setting APIC_LVT_MASKED is also ineffective in practice on Intel Lunar Lake systems, which is the motivation for this change. 1. 411 Processor May Exit Message-Triggered C1E State Without an Interrupt if Local APIC Timer Reaches Zero - https://www.amd.com/content/dam/amd/en/documents/archived-tech-docs/revision-guides/41322_10h_Rev_Gd.pdf Fixes: 279f1461432c ("x86: apic: Use tsc deadline for oneshot when available") Suggested-by: Dave Hansen Signed-off-by: Zhang Rui Signed-off-by: Dave Hansen Reviewed-by: Rafael J. Wysocki Tested-by: Srinivas Pandruvada Tested-by: Todd Brandt Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20241015061522.25288-1-rui.zhang%40intel.com Signed-off-by: Greg Kroah-Hartman commit fd7133ec79507340c77589a811daa9823f36affa Author: Nathan Chancellor Date: Tue Sep 17 09:02:53 2024 -0700 x86/resctrl: Annotate get_mem_config() functions as __init commit d5fd042bf4cfb557981d65628e1779a492cd8cfa upstream. After a recent LLVM change [1] that deduces __cold on functions that only call cold code (such as __init functions), there is a section mismatch warning from __get_mem_config_intel(), which got moved to .text.unlikely. as a result of that optimization: WARNING: modpost: vmlinux: section mismatch in reference: \ __get_mem_config_intel+0x77 (section: .text.unlikely.) -> thread_throttle_mode_init (section: .init.text) Mark __get_mem_config_intel() as __init as well since it is only called from __init code, which clears up the warning. While __rdt_get_mem_config_amd() does not exhibit a warning because it does not call any __init code, it is a similar function that is only called from __init code like __get_mem_config_intel(), so mark it __init as well to keep the code symmetrical. CONFIG_SECTION_MISMATCH_WARN_ONLY=n would turn this into a fatal error. Fixes: 05b93417ce5b ("x86/intel_rdt/mba: Add primary support for Memory Bandwidth Allocation (MBA)") Fixes: 4d05bf71f157 ("x86/resctrl: Introduce AMD QOS feature") Signed-off-by: Nathan Chancellor Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Reinette Chatre Cc: Link: https://github.com/llvm/llvm-project/commit/6b11573b8c5e3d36beee099dbe7347c2a007bf53 [1] Link: https://lore.kernel.org/r/20240917-x86-restctrl-get_mem_config_intel-init-v3-1-10d521256284@kernel.org Signed-off-by: Greg Kroah-Hartman commit b0641e53e6cb937487b6cfb15772374f0ba149b3 Author: Takashi Iwai Date: Fri Sep 20 12:32:19 2024 +0200 parport: Proper fix for array out-of-bounds access commit 02ac3a9ef3a18b58d8f3ea2b6e46de657bf6c4f9 upstream. The recent fix for array out-of-bounds accesses replaced sprintf() calls blindly with snprintf(). However, since snprintf() returns the would-be-printed size, not the actually output size, the length calculation can still go over the given limit. Use scnprintf() instead of snprintf(), which returns the actually output letters, for addressing the potential out-of-bounds access properly. Fixes: ab11dac93d2d ("dev/parport: fix the array out-of-bounds risk") Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai Link: https://lore.kernel.org/r/20240920103318.19271-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman commit 5ead5b445f6b3cde1f2c64fc546f208ef82e3d6d Author: Daniele Palmas Date: Thu Oct 3 11:38:08 2024 +0200 USB: serial: option: add Telit FN920C04 MBIM compositions commit 6d951576ee16430822a8dee1e5c54d160e1de87d upstream. Add the following Telit FN920C04 compositions: 0x10a2: MBIM + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a2 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a7: MBIM + tty (AT) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 18 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a7 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10aa: MBIM + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 15 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10aa Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit bd704359a8ca7fac71b45ebef04e794e285b7599 Author: Benjamin B. Frost Date: Wed Sep 11 10:54:05 2024 +0200 USB: serial: option: add support for Quectel EG916Q-GL commit 540eff5d7faf0c9330ec762da49df453263f7676 upstream. Add Quectel EM916Q-GL with product ID 0x6007 T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=6007 Rev= 2.00 S: Manufacturer=Quectel S: Product=EG916Q-GL C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=200mA A: FirstIf#= 4 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 16 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=88(I) Atr=03(Int.) MxPS= 32 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms MI_00 Quectel USB Diag Port MI_01 Quectel USB NMEA Port MI_02 Quectel USB AT Port MI_03 Quectel USB Modem Port MI_04 Quectel USB Net Port Signed-off-by: Benjamin B. Frost Reviewed-by: Lars Melin Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 1f8cab3365674fa83308e8b753aa9cc61bf6437e Author: Mathias Nyman Date: Wed Oct 16 16:59:57 2024 +0300 xhci: Fix incorrect stream context type macro commit 6599b6a6fa8060145046d0744456b6abdb3122a7 upstream. The stream contex type (SCT) bitfield is used both in the stream context data structure, and in the 'Set TR Dequeue pointer' command TRB. In both cases it uses bits 3:1 The SCT_FOR_TRB(p) macro used to set the stream context type (SCT) field for the 'Set TR Dequeue pointer' command TRB incorrectly shifts the value 1 bit left before masking the three bits. Fix this by first masking and rshifting, just like the similar SCT_FOR_CTX(p) macro does This issue has not been visibile as the lost bit 3 is only used with secondary stream arrays (SSA). Xhci driver currently only supports using a primary stream array with Linear stream addressing. Fixes: 95241dbdf828 ("xhci: Set SCT field for Set TR dequeue on streams") Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20241016140000.783905-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit d42c3fa1209890ce838476bbd5e56ad4f6a39679 Author: Luiz Augusto von Dentz Date: Wed Oct 16 11:47:00 2024 -0400 Bluetooth: btusb: Fix regression with fake CSR controllers 0a12:0001 commit 2c1dda2acc4192d826e84008d963b528e24d12bc upstream. Fake CSR controllers don't seem to handle short-transfer properly which cause command to time out: kernel: usb 1-1: new full-speed USB device number 19 using xhci_hcd kernel: usb 1-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91 kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 kernel: usb 1-1: Product: BT DONGLE10 ... Bluetooth: hci1: Opcode 0x1004 failed: -110 kernel: Bluetooth: hci1: command 0x1004 tx timeout According to USB Spec 2.0 Section 5.7.3 Interrupt Transfer Packet Size Constraints a interrupt transfer is considered complete when the size is 0 (ZPL) or < wMaxPacketSize: 'When an interrupt transfer involves more data than can fit in one data payload of the currently established maximum size, all data payloads are required to be maximum-sized except for the last data payload, which will contain the remaining data. An interrupt transfer is complete when the endpoint does one of the following: • Has transferred exactly the amount of data expected • Transfers a packet with a payload size less than wMaxPacketSize or transfers a zero-length packet' Link: https://bugzilla.kernel.org/show_bug.cgi?id=219365 Fixes: 7b05933340f4 ("Bluetooth: btusb: Fix not handling ZPL/short-transfer") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 4b9cf50a782de4879ff65db18b53e8248d3bb75e Author: Aaron Thompson Date: Fri Oct 4 23:04:10 2024 +0000 Bluetooth: Remove debugfs directory on module init failure commit 1db4564f101b47188c1b71696bd342ef09172b22 upstream. If bt_init() fails, the debugfs directory currently is not removed. If the module is loaded again after that, the debugfs directory is not set up properly due to the existing directory. # modprobe bluetooth # ls -laF /sys/kernel/debug/bluetooth total 0 drwxr-xr-x 2 root root 0 Sep 27 14:26 ./ drwx------ 31 root root 0 Sep 27 14:25 ../ -r--r--r-- 1 root root 0 Sep 27 14:26 l2cap -r--r--r-- 1 root root 0 Sep 27 14:26 sco # modprobe -r bluetooth # ls -laF /sys/kernel/debug/bluetooth ls: cannot access '/sys/kernel/debug/bluetooth': No such file or directory # # modprobe bluetooth modprobe: ERROR: could not insert 'bluetooth': Invalid argument # dmesg | tail -n 6 Bluetooth: Core ver 2.22 NET: Registered PF_BLUETOOTH protocol family Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Faking l2cap_init() failure for testing NET: Unregistered PF_BLUETOOTH protocol family # ls -laF /sys/kernel/debug/bluetooth total 0 drwxr-xr-x 2 root root 0 Sep 27 14:31 ./ drwx------ 31 root root 0 Sep 27 14:26 ../ # # modprobe bluetooth # dmesg | tail -n 7 Bluetooth: Core ver 2.22 debugfs: Directory 'bluetooth' with parent '/' already present! NET: Registered PF_BLUETOOTH protocol family Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized # ls -laF /sys/kernel/debug/bluetooth total 0 drwxr-xr-x 2 root root 0 Sep 27 14:31 ./ drwx------ 31 root root 0 Sep 27 14:26 ../ # Cc: stable@vger.kernel.org Fixes: ffcecac6a738 ("Bluetooth: Create root debugfs directory during module init") Signed-off-by: Aaron Thompson Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit f193dddd2f290dc8a3bc80ccae62f08ef48a1263 Author: Javier Carrasco Date: Thu Oct 3 23:04:49 2024 +0200 iio: adc: ti-ads124s08: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig commit eb143d05def52bc6d193e813018e5fa1a0e47c77 upstream. This driver makes use of triggered buffers, but does not select the required modules. Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'. Fixes: e717f8c6dfec ("iio: adc: Add the TI ads124s08 ADC code") Signed-off-by: Javier Carrasco Link: https://patch.msgid.link/20241003-iio-select-v1-3-67c0385197cd@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit f36e441f30f20fd040d7ae6ba928c21354efa703 Author: Javier Carrasco Date: Thu Oct 3 23:04:59 2024 +0200 iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig commit 75461a0b15d7c026924d0001abce0476bbc7eda8 upstream. This driver makes use of triggered buffers, but does not select the required modules. Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'. Fixes: 16b05261537e ("mb1232.c: add distance iio sensor with i2c") Signed-off-by: Javier Carrasco Link: https://patch.msgid.link/20241003-iio-select-v1-13-67c0385197cd@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 81c795125a562023b6dc15f73e9297fb3d295a5f Author: Emil Gedenryd Date: Fri Sep 13 11:57:02 2024 +0200 iio: light: opt3001: add missing full-scale range value commit 530688e39c644543b71bdd9cb45fdfb458a28eaa upstream. The opt3001 driver uses predetermined full-scale range values to determine what exponent to use for event trigger threshold values. The problem is that one of the values specified in the datasheet is missing from the implementation. This causes larger values to be scaled down to an incorrect exponent, effectively reducing the maximum settable threshold value by a factor of 2. Add missing full-scale range array value. Fixes: 94a9b7b1809f ("iio: light: add support for TI's opt3001 light sensor") Signed-off-by: Emil Gedenryd Cc: Link: https://patch.msgid.link/20240913-add_opt3002-v2-1-69e04f840360@axis.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 96c1a70c134075947b9fadcc60d0aa84dd2a76ff Author: Christophe JAILLET Date: Thu Oct 3 20:41:12 2024 +0200 iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency() commit 3a29b84cf7fbf912a6ab1b9c886746f02b74ea25 upstream. If hid_sensor_set_report_latency() fails, the error code should be returned instead of a value likely to be interpreted as 'success'. Fixes: 138bc7969c24 ("iio: hid-sensor-hub: Implement batch mode") Signed-off-by: Christophe JAILLET Acked-by: Srinivas Pandruvada Link: https://patch.msgid.link/c50640665f091a04086e5092cf50f73f2055107a.1727980825.git.christophe.jaillet@wanadoo.fr Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 65cbc40d8ccf9275f2449a96fe4c61185f33a111 Author: Javier Carrasco Date: Thu Oct 3 23:04:50 2024 +0200 iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig commit 4c4834fd8696a949d1b1f1c2c5b96e1ad2083b02 upstream. This driver makes use of triggered buffers, but does not select the required modules. Fixes: 2a86487786b5 ("iio: adc: ti-ads8688: add trigger and buffer support") Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'. Signed-off-by: Javier Carrasco Reviewed-by: Sean Nyekjaer Link: https://patch.msgid.link/20241003-iio-select-v1-4-67c0385197cd@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 06f899ff18e1d45ae6eafe5062f151f2b5139301 Author: Javier Carrasco Date: Thu Oct 3 18:49:40 2024 +0200 iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig commit 27b6aa68a68105086aef9f0cb541cd688e5edea8 upstream. This driver makes use of regmap_mmio, but does not select the required module. Add the missing 'select REGMAP_MMIO'. Fixes: 4d4b30526eb8 ("iio: dac: add support for stm32 DAC") Signed-off-by: Javier Carrasco Link: https://patch.msgid.link/20241003-ad2s1210-select-v1-8-4019453f8c33@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 28d6fb095a7db8ad1455896538836bf8bc6e3cc4 Author: Javier Carrasco Date: Thu Oct 3 18:49:39 2024 +0200 iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig commit 252ff06a4cb4e572cb3c7fcfa697db96b08a7781 upstream. This driver makes use of regmap_spi, but does not select the required module. Add the missing 'select REGMAP_SPI'. Fixes: 8316cebd1e59 ("iio: dac: add support for ltc1660") Signed-off-by: Javier Carrasco Link: https://patch.msgid.link/20241003-ad2s1210-select-v1-7-4019453f8c33@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit ab4274f9ab9b023c5be7dd68a2ed74ee55eacc05 Author: Nikolay Kuratov Date: Wed Oct 2 15:24:29 2024 +0300 drm/vmwgfx: Handle surface check failure correctly commit 26498b8d54373d31a621d7dec95c4bd842563b3b upstream. Currently if condition (!bo and !vmw_kms_srf_ok()) was met we go to err_out with ret == 0. err_out dereferences vfb if ret == 0, but in our case vfb is still NULL. Fix this by assigning sensible error to ret. Found by Linux Verification Center (linuxtesting.org) with SVACE Signed-off-by: Nikolay Kuratov Cc: stable@vger.kernel.org Fixes: 810b3e1683d0 ("drm/vmwgfx: Support topology greater than texture size") Signed-off-by: Zack Rusin Link: https://patchwork.freedesktop.org/patch/msgid/20241002122429.1981822-1-kniv@yandex-team.ru Signed-off-by: Greg Kroah-Hartman commit d04b72c9ef2b0689bfc1057d21c4aeed087c329f Author: Omar Sandoval Date: Tue Oct 15 10:59:46 2024 -0700 blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race commit e972b08b91ef48488bae9789f03cfedb148667fb upstream. We're seeing crashes from rq_qos_wake_function that look like this: BUG: unable to handle page fault for address: ffffafe180a40084 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0 Oops: Oops: 0002 [#1] PREEMPT SMP PTI CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40 Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 0f b1 17 75 0a 4c 89 e0 41 5c c3 cc cc cc cc 89 c6 e8 2c 0b 00 RSP: 0018:ffffafe180580ca0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffffafe180a3f7a8 RCX: 0000000000000011 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffafe180a40084 RBP: 0000000000000000 R08: 00000000001e7240 R09: 0000000000000011 R10: 0000000000000028 R11: 0000000000000888 R12: 0000000000000002 R13: ffffafe180a40084 R14: 0000000000000000 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff9aaf1f280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffafe180a40084 CR3: 000000010e428002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: try_to_wake_up+0x5a/0x6a0 rq_qos_wake_function+0x71/0x80 __wake_up_common+0x75/0xa0 __wake_up+0x36/0x60 scale_up.part.0+0x50/0x110 wb_timer_fn+0x227/0x450 ... So rq_qos_wake_function() calls wake_up_process(data->task), which calls try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock). p comes from data->task, and data comes from the waitqueue entry, which is stored on the waiter's stack in rq_qos_wait(). Analyzing the core dump with drgn, I found that the waiter had already woken up and moved on to a completely unrelated code path, clobbering what was previously data->task. Meanwhile, the waker was passing the clobbered garbage in data->task to wake_up_process(), leading to the crash. What's happening is that in between rq_qos_wake_function() deleting the waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding that it already got a token and returning. The race looks like this: rq_qos_wait() rq_qos_wake_function() ============================================================== prepare_to_wait_exclusive() data->got_token = true; list_del_init(&curr->entry); if (data.got_token) break; finish_wait(&rqw->wait, &data.wq); ^- returns immediately because list_empty_careful(&wq_entry->entry) is true ... return, go do something else ... wake_up_process(data->task) (NO LONGER VALID!)-^ Normally, finish_wait() is supposed to synchronize against the waker. But, as noted above, it is returning immediately because the waitqueue entry has already been removed from the waitqueue. The bug is that rq_qos_wake_function() is accessing the waitqueue entry AFTER deleting it. Note that autoremove_wake_function() wakes the waiter and THEN deletes the waitqueue entry, which is the proper order. Fix it by swapping the order. We also need to use list_del_init_careful() to match the list_empty_careful() in finish_wait(). Fixes: 38cfb5a45ee0 ("blk-wbt: improve waking of tasks") Cc: stable@vger.kernel.org Signed-off-by: Omar Sandoval Acked-by: Tejun Heo Reviewed-by: Johannes Thumshirn Link: https://lore.kernel.org/r/d3bee2463a67b1ee597211823bf7ad3721c26e41.1729014591.git.osandov@fb.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 9051f851a436bfa2e938416effecc30c2906caf8 Author: Jim Mattson Date: Fri Sep 13 10:32:27 2024 -0700 x86/cpufeatures: Define X86_FEATURE_AMD_IBPB_RET commit ff898623af2ed564300752bba83a680a1e4fec8d upstream. AMD's initial implementation of IBPB did not clear the return address predictor. Beginning with Zen4, AMD's IBPB *does* clear the return address predictor. This behavior is enumerated by CPUID.80000008H:EBX.IBPB_RET[30]. Define X86_FEATURE_AMD_IBPB_RET for use in KVM_GET_SUPPORTED_CPUID, when determining cross-vendor capabilities. Suggested-by: Venkatesh Srinivas Signed-off-by: Jim Mattson Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Tom Lendacky Reviewed-by: Thomas Gleixner Cc: Signed-off-by: Greg Kroah-Hartman commit 45d5596d4448130a838329c9a2a1ca75066cc0ac Author: Michael Mueller Date: Tue Sep 17 17:18:34 2024 +0200 KVM: s390: Change virtual to physical address access in diag 0x258 handler commit cad4b3d4ab1f062708fff33f44d246853f51e966 upstream. The parameters for the diag 0x258 are real addresses, not virtual, but KVM was using them as virtual addresses. This only happened to work, since the Linux kernel as a guest used to have a 1:1 mapping for physical vs virtual addresses. Fix KVM so that it correctly uses the addresses as real addresses. Cc: stable@vger.kernel.org Fixes: 8ae04b8f500b ("KVM: s390: Guest's memory access functions get access registers") Suggested-by: Vasily Gorbik Signed-off-by: Michael Mueller Signed-off-by: Nico Boehr Reviewed-by: Christian Borntraeger Reviewed-by: Heiko Carstens Link: https://lore.kernel.org/r/20240917151904.74314-3-nrb@linux.ibm.com Acked-by: Janosch Frank Signed-off-by: Heiko Carstens Signed-off-by: Greg Kroah-Hartman commit f2f7d15487d623db5bca5cc552f86be86bef5af1 Author: Thomas Weißschuh Date: Mon Oct 14 07:50:07 2024 +0200 s390/sclp_vt220: Convert newlines to CRLF instead of LFCR commit dee3df68ab4b00fff6bdf9fc39541729af37307c upstream. According to the VT220 specification the possible character combinations sent on RETURN are only CR or CRLF [0]. The Return key sends either a CR character (0/13) or a CR character (0/13) and an LF character (0/10), depending on the set/reset state of line feed/new line mode (LNM). The sclp/vt220 driver however uses LFCR. This can confuse tools, for example the kunit runner. Link: https://vt100.net/docs/vt220-rm/chapter3.html#S3.2 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh Reviewed-by: Sven Schnelle Link: https://lore.kernel.org/r/20241014-s390-kunit-v1-2-941defa765a6@linutronix.de Signed-off-by: Heiko Carstens Signed-off-by: Greg Kroah-Hartman commit 4c141136a28421b78f34969b25a4fa32e06e2180 Author: Breno Leitao Date: Fri May 10 02:23:52 2024 -0700 KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin() commit 49f683b41f28918df3e51ddc0d928cb2e934ccdb upstream. Use {READ,WRITE}_ONCE() to access kvm->last_boosted_vcpu to ensure the loads and stores are atomic. In the extremely unlikely scenario the compiler tears the stores, it's theoretically possible for KVM to attempt to get a vCPU using an out-of-bounds index, e.g. if the write is split into multiple 8-bit stores, and is paired with a 32-bit load on a VM with 257 vCPUs: CPU0 CPU1 last_boosted_vcpu = 0xff; (last_boosted_vcpu = 0x100) last_boosted_vcpu[15:8] = 0x01; i = (last_boosted_vcpu = 0x1ff) last_boosted_vcpu[7:0] = 0x00; vcpu = kvm->vcpu_array[0x1ff]; As detected by KCSAN: BUG: KCSAN: data-race in kvm_vcpu_on_spin [kvm] / kvm_vcpu_on_spin [kvm] write to 0xffffc90025a92344 of 4 bytes by task 4340 on cpu 16: kvm_vcpu_on_spin (arch/x86/kvm/../../../virt/kvm/kvm_main.c:4112) kvm handle_pause (arch/x86/kvm/vmx/vmx.c:5929) kvm_intel vmx_handle_exit (arch/x86/kvm/vmx/vmx.c:? arch/x86/kvm/vmx/vmx.c:6606) kvm_intel vcpu_run (arch/x86/kvm/x86.c:11107 arch/x86/kvm/x86.c:11211) kvm kvm_arch_vcpu_ioctl_run (arch/x86/kvm/x86.c:?) kvm kvm_vcpu_ioctl (arch/x86/kvm/../../../virt/kvm/kvm_main.c:?) kvm __se_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:904 fs/ioctl.c:890) __x64_sys_ioctl (fs/ioctl.c:890) x64_sys_call (arch/x86/entry/syscall_64.c:33) do_syscall_64 (arch/x86/entry/common.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) read to 0xffffc90025a92344 of 4 bytes by task 4342 on cpu 4: kvm_vcpu_on_spin (arch/x86/kvm/../../../virt/kvm/kvm_main.c:4069) kvm handle_pause (arch/x86/kvm/vmx/vmx.c:5929) kvm_intel vmx_handle_exit (arch/x86/kvm/vmx/vmx.c:? arch/x86/kvm/vmx/vmx.c:6606) kvm_intel vcpu_run (arch/x86/kvm/x86.c:11107 arch/x86/kvm/x86.c:11211) kvm kvm_arch_vcpu_ioctl_run (arch/x86/kvm/x86.c:?) kvm kvm_vcpu_ioctl (arch/x86/kvm/../../../virt/kvm/kvm_main.c:?) kvm __se_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:904 fs/ioctl.c:890) __x64_sys_ioctl (fs/ioctl.c:890) x64_sys_call (arch/x86/entry/syscall_64.c:33) do_syscall_64 (arch/x86/entry/common.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) value changed: 0x00000012 -> 0x00000000 Fixes: 217ece6129f2 ("KVM: use yield_to instead of sleep in kvm_vcpu_on_spin") Cc: stable@vger.kernel.org Signed-off-by: Breno Leitao Link: https://lore.kernel.org/r/20240510092353.2261824-1-leitao@debian.org Signed-off-by: Sean Christopherson Signed-off-by: Saeed Mirzamohammadi Signed-off-by: Greg Kroah-Hartman commit 2408f491ff998d674707725eadc47d8930aced09 Author: Johannes Berg Date: Tue Sep 19 08:34:15 2023 +0200 wifi: mac80211: fix potential key use-after-free commit 31db78a4923ef5e2008f2eed321811ca79e7f71b upstream. When ieee80211_key_link() is called by ieee80211_gtk_rekey_add() but returns 0 due to KRACK protection (identical key reinstall), ieee80211_gtk_rekey_add() will still return a pointer into the key, in a potential use-after-free. This normally doesn't happen since it's only called by iwlwifi in case of WoWLAN rekey offload which has its own KRACK protection, but still better to fix, do that by returning an error code and converting that to success on the cfg80211 boundary only, leaving the error for bad callers of ieee80211_gtk_rekey_add(). Reported-by: Dan Carpenter Fixes: fdf7cb4185b6 ("mac80211: accept key reinstall without changing anything") Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin [ Sherry: bp to fix CVE-2023-52530, resolved minor conflicts in net/mac80211/cfg.c because of context change due to missing commit 23a5f0af6ff4 ("wifi: mac80211: remove cipher scheme support") ccdde7c74ffd ("wifi: mac80211: properly implement MLO key handling")] Signed-off-by: Sherry Yang Signed-off-by: Greg Kroah-Hartman commit ba7f982cdb37ff5a7739dec85d7325ea66fc1496 Author: Liu Shixin Date: Tue Oct 15 09:45:21 2024 +0800 mm/swapfile: skip HugeTLB pages for unuse_vma commit 7528c4fb1237512ee18049f852f014eba80bbe8d upstream. I got a bad pud error and lost a 1GB HugeTLB when calling swapoff. The problem can be reproduced by the following steps: 1. Allocate an anonymous 1GB HugeTLB and some other anonymous memory. 2. Swapout the above anonymous memory. 3. run swapoff and we will get a bad pud error in kernel message: mm/pgtable-generic.c:42: bad pud 00000000743d215d(84000001400000e7) We can tell that pud_clear_bad is called by pud_none_or_clear_bad in unuse_pud_range() by ftrace. And therefore the HugeTLB pages will never be freed because we lost it from page table. We can skip HugeTLB pages for unuse_vma to fix it. Link: https://lkml.kernel.org/r/20241015014521.570237-1-liushixin2@huawei.com Fixes: 0fe6e20b9c4c ("hugetlb, rmap: add reverse mapping for hugepage") Signed-off-by: Liu Shixin Acked-by: Muchun Song Cc: Naoya Horiguchi Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 085e68e97fb04a6ccfc30866e3a7c0040d6efd90 Author: OGAWA Hirofumi Date: Fri Oct 4 15:03:49 2024 +0900 fat: fix uninitialized variable commit 963a7f4d3b90ee195b895ca06b95757fcba02d1a upstream. syszbot produced this with a corrupted fs image. In theory, however an IO error would trigger this also. This affects just an error report, so should not be a serious error. Link: https://lkml.kernel.org/r/87r08wjsnh.fsf@mail.parknet.co.jp Link: https://lkml.kernel.org/r/66ff2c95.050a0220.49194.03e9.GAE@google.com Signed-off-by: OGAWA Hirofumi Reported-by: syzbot+ef0d7bc412553291aa86@syzkaller.appspotmail.com Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 10edcff09468883460e9c8c02309d63311302317 Author: WangYuli Date: Fri Aug 23 17:57:08 2024 +0800 PCI: Add function 0 DMA alias quirk for Glenfly Arise chip commit 9246b487ab3c3b5993aae7552b7a4c541cc14a49 upstream. Add DMA support for audio function of Glenfly Arise chip, which uses Requester ID of function 0. Link: https://lore.kernel.org/r/CA2BBD087345B6D1+20240823095708.3237375-1-wangyuli@uniontech.com Signed-off-by: SiyuLi Signed-off-by: WangYuli [bhelgaas: lower-case hex to match local code, drop unused Device IDs] Signed-off-by: Bjorn Helgaas Reviewed-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit f198659ecb8b4a055a2ed2aaf759f966619f41ec Author: Andrii Nakryiko Date: Fri Oct 27 16:31:26 2023 -0700 tracing/kprobes: Fix symbol counting logic by looking at modules as well commit 926fe783c8a64b33997fec405cf1af3e61aed441 upstream. Recent changes to count number of matching symbols when creating a kprobe event failed to take into account kernel modules. As such, it breaks kprobes on kernel module symbols, by assuming there is no match. Fix this my calling module_kallsyms_on_each_symbol() in addition to kallsyms_on_each_match_symbol() to perform a proper counting. Link: https://lore.kernel.org/all/20231027233126.2073148-1-andrii@kernel.org/ Cc: Francis Laniel Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Steven Rostedt Fixes: b022f0c7e404 ("tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols") Signed-off-by: Andrii Nakryiko Acked-by: Song Liu Signed-off-by: Masami Hiramatsu (Google) [ Sherry: It's a fix for previous backport, thus backport together to 5.4.y ] Signed-off-by: Sherry Yang Signed-off-by: Greg Kroah-Hartman commit d3679f63a165ec9c25c1ce05bac17c66ea7de8d4 Author: Francis Laniel Date: Fri Oct 20 13:42:49 2023 +0300 tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols commit b022f0c7e404887a7c5229788fc99eff9f9a80d5 upstream. When a kprobe is attached to a function that's name is not unique (is static and shares the name with other functions in the kernel), the kprobe is attached to the first function it finds. This is a bug as the function that it is attaching to is not necessarily the one that the user wants to attach to. Instead of blindly picking a function to attach to what is ambiguous, error with EADDRNOTAVAIL to let the user know that this function is not unique, and that the user must use another unique function with an address offset to get to the function they want to attach to. Link: https://lore.kernel.org/all/20231020104250.9537-2-flaniel@linux.microsoft.com/ Cc: stable@vger.kernel.org Fixes: 413d37d1eb69 ("tracing: Add kprobe-based event tracer") Suggested-by: Masami Hiramatsu Signed-off-by: Francis Laniel Link: https://lore.kernel.org/lkml/20230819101105.b0c104ae4494a7d1f2eea742@kernel.org/ Acked-by: Masami Hiramatsu (Google) Signed-off-by: Masami Hiramatsu (Google) [ Sherry: kselftest kprobe_non_uniq_symbol.tc failed on 5.4.y, because of missing this commit, backport it to 5.4.y. Minor conflicts due to context change, ignore context change ] Signed-off-by: Sherry Yang Signed-off-by: Greg Kroah-Hartman commit 87677556d5040486d0c49fc9b1f0f44638a476f4 Author: Mark Rutland Date: Tue Oct 8 16:58:47 2024 +0100 arm64: probes: Fix simulate_ldr*_literal() commit 50f813e57601c22b6f26ced3193b9b94d70a2640 upstream. The simulate_ldr_literal() code always loads a 64-bit quantity, and when simulating a 32-bit load into a 'W' register, it discards the most significant 32 bits. For big-endian kernels this means that the relevant bits are discarded, and the value returned is the the subsequent 32 bits in memory (i.e. the value at addr + 4). Additionally, simulate_ldr_literal() and simulate_ldrsw_literal() use a plain C load, which the compiler may tear or elide (e.g. if the target is the zero register). Today this doesn't happen to matter, but it may matter in future if trampoline code uses a LDR (literal) or LDRSW (literal). Update simulate_ldr_literal() and simulate_ldrsw_literal() to use an appropriately-sized READ_ONCE() to perform the access, which avoids these problems. Fixes: 39a67d49ba35 ("arm64: kprobes instruction simulation support") Cc: stable@vger.kernel.org Signed-off-by: Mark Rutland Cc: Catalin Marinas Cc: Will Deacon Link: https://lore.kernel.org/r/20241008155851.801546-3-mark.rutland@arm.com Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman commit ae743deca78d9e4b7f4f60ad2f95e20e8ea057f9 Author: Mark Rutland Date: Tue Oct 8 16:58:46 2024 +0100 arm64: probes: Remove broken LDR (literal) uprobe support commit acc450aa07099d071b18174c22a1119c57da8227 upstream. The simulate_ldr_literal() and simulate_ldrsw_literal() functions are unsafe to use for uprobes. Both functions were originally written for use with kprobes, and access memory with plain C accesses. When uprobes was added, these were reused unmodified even though they cannot safely access user memory. There are three key problems: 1) The plain C accesses do not have corresponding extable entries, and thus if they encounter a fault the kernel will treat these as unintentional accesses to user memory, resulting in a BUG() which will kill the kernel thread, and likely lead to further issues (e.g. lockup or panic()). 2) The plain C accesses are subject to HW PAN and SW PAN, and so when either is in use, any attempt to simulate an access to user memory will fault. Thus neither simulate_ldr_literal() nor simulate_ldrsw_literal() can do anything useful when simulating a user instruction on any system with HW PAN or SW PAN. 3) The plain C accesses are privileged, as they run in kernel context, and in practice can access a small range of kernel virtual addresses. The instructions they simulate have a range of +/-1MiB, and since the simulated instructions must itself be a user instructions in the TTBR0 address range, these can address the final 1MiB of the TTBR1 acddress range by wrapping downwards from an address in the first 1MiB of the TTBR0 address range. In contemporary kernels the last 8MiB of TTBR1 address range is reserved, and accesses to this will always fault, meaning this is no worse than (1). Historically, it was theoretically possible for the linear map or vmemmap to spill into the final 8MiB of the TTBR1 address range, but in practice this is extremely unlikely to occur as this would require either: * Having enough physical memory to fill the entire linear map all the way to the final 1MiB of the TTBR1 address range. * Getting unlucky with KASLR randomization of the linear map such that the populated region happens to overlap with the last 1MiB of the TTBR address range. ... and in either case if we were to spill into the final page there would be larger problems as the final page would alias with error pointers. Practically speaking, (1) and (2) are the big issues. Given there have been no reports of problems since the broken code was introduced, it appears that no-one is relying on probing these instructions with uprobes. Avoid these issues by not allowing uprobes on LDR (literal) and LDRSW (literal), limiting the use of simulate_ldr_literal() and simulate_ldrsw_literal() to kprobes. Attempts to place uprobes on LDR (literal) and LDRSW (literal) will be rejected as arm_probe_decode_insn() will return INSN_REJECTED. In future we can consider introducing working uprobes support for these instructions, but this will require more significant work. Fixes: 9842ceae9fa8 ("arm64: Add uprobe support") Cc: stable@vger.kernel.org Signed-off-by: Mark Rutland Cc: Catalin Marinas Cc: Will Deacon Link: https://lore.kernel.org/r/20241008155851.801546-2-mark.rutland@arm.com Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman commit e0c966bd3e31911b57ef76cec4c5796ebd88e512 Author: Jinjie Ruan Date: Wed Oct 9 15:23:01 2024 +0800 posix-clock: Fix missing timespec64 check in pc_clock_settime() commit d8794ac20a299b647ba9958f6d657051fc51a540 upstream. As Andrew pointed out, it will make sense that the PTP core checked timespec64 struct's tv_sec and tv_nsec range before calling ptp->info->settime64(). As the man manual of clock_settime() said, if tp.tv_sec is negative or tp.tv_nsec is outside the range [0..999,999,999], it should return EINVAL, which include dynamic clocks which handles PTP clock, and the condition is consistent with timespec64_valid(). As Thomas suggested, timespec64_valid() only check the timespec is valid, but not ensure that the time is in a valid range, so check it ahead using timespec64_valid_strict() in pc_clock_settime() and return -EINVAL if not valid. There are some drivers that use tp->tv_sec and tp->tv_nsec directly to write registers without validity checks and assume that the higher layer has checked it, which is dangerous and will benefit from this, such as hclge_ptp_settime(), igb_ptp_settime_i210(), _rcar_gen4_ptp_settime(), and some drivers can remove the checks of itself. Cc: stable@vger.kernel.org Fixes: 0606f422b453 ("posix clocks: Introduce dynamic clocks") Acked-by: Richard Cochran Suggested-by: Andrew Lunn Suggested-by: Thomas Gleixner Signed-off-by: Jinjie Ruan Link: https://patch.msgid.link/20241009072302.1754567-2-ruanjinjie@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit fd9bb7e996bab9b9049fffe3f3d3b50dee191d27 Author: Yonatan Maman Date: Tue Oct 8 14:59:43 2024 +0300 nouveau/dmem: Fix vulnerability in migrate_to_ram upon copy error commit 835745a377a4519decd1a36d6b926e369b3033e2 upstream. The `nouveau_dmem_copy_one` function ensures that the copy push command is sent to the device firmware but does not track whether it was executed successfully. In the case of a copy error (e.g., firmware or hardware failure), the copy push command will be sent via the firmware channel, and `nouveau_dmem_copy_one` will likely report success, leading to the `migrate_to_ram` function returning a dirty HIGH_USER page to the user. This can result in a security vulnerability, as a HIGH_USER page that may contain sensitive or corrupted data could be returned to the user. To prevent this vulnerability, we allocate a zero page. Thus, in case of an error, a non-dirty (zero) page will be returned to the user. Fixes: 5be73b690875 ("drm/nouveau/dmem: device memory helpers for SVM") Signed-off-by: Yonatan Maman Co-developed-by: Gal Shalom Signed-off-by: Gal Shalom Reviewed-by: Ben Skeggs Cc: stable@vger.kernel.org Signed-off-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/20241008115943.990286-3-ymaman@nvidia.com Signed-off-by: Greg Kroah-Hartman commit 8e0766fcf37ad8eed289dd3853628dd9b01b58b0 Author: Anastasia Kovaleva Date: Thu Oct 3 13:44:31 2024 +0300 net: Fix an unsafe loop on the list commit 1dae9f1187189bc09ff6d25ca97ead711f7e26f9 upstream. The kernel may crash when deleting a genetlink family if there are still listeners for that family: Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c000000000c080bc] netlink_update_socket_mc+0x3c/0xc0 LR [c000000000c0f764] __netlink_clear_multicast_users+0x74/0xc0 Call Trace: __netlink_clear_multicast_users+0x74/0xc0 genl_unregister_family+0xd4/0x2d0 Change the unsafe loop on the list to a safe one, because inside the loop there is an element removal from this list. Fixes: b8273570f802 ("genetlink: fix netns vs. netlink table locking (2)") Cc: stable@vger.kernel.org Signed-off-by: Anastasia Kovaleva Reviewed-by: Dmitry Bogdanov Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20241003104431.12391-1-a.kovaleva@yadro.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 7f435eba8465270c38e8e3edf63d2ae5b721cc53 Author: SurajSonawane2415 Date: Fri Oct 4 13:29:44 2024 +0530 hid: intel-ish-hid: Fix uninitialized variable 'rv' in ish_fw_xfer_direct_dma commit d41bff05a61fb539f21e9bf0d39fac77f457434e upstream. Fix the uninitialized symbol 'rv' in the function ish_fw_xfer_direct_dma to resolve the following warning from the smatch tool: drivers/hid/intel-ish-hid/ishtp-fw-loader.c:714 ish_fw_xfer_direct_dma() error: uninitialized symbol 'rv'. Initialize 'rv' to 0 to prevent undefined behavior from uninitialized access. Cc: stable@vger.kernel.org Fixes: 91b228107da3 ("HID: intel-ish-hid: ISH firmware loader client driver") Signed-off-by: SurajSonawane2415 Link: https://patch.msgid.link/20241004075944.44932-1-surajsonawane0215@gmail.com Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman commit 5319b50c4910e703505ae672b82778ee2c919601 Author: Icenowy Zheng Date: Tue Oct 1 16:34:07 2024 +0800 usb: storage: ignore bogus device raised by JieLi BR21 USB sound chip commit a6555cb1cb69db479d0760e392c175ba32426842 upstream. JieLi tends to use SCSI via USB Mass Storage to implement their own proprietary commands instead of implementing another USB interface. Enumerating it as a generic mass storage device will lead to a Hardware Error sense key get reported. Ignore this bogus device to prevent appearing a unusable sdX device file. Signed-off-by: Icenowy Zheng Cc: stable Acked-by: Alan Stern Link: https://lore.kernel.org/r/20241001083407.8336-1-uwu@icenowy.me Signed-off-by: Greg Kroah-Hartman commit 72887e9fd6ac76d23240a564c23ddb17a58b23e0 Author: Jose Alberto Reguero Date: Thu Sep 19 20:42:02 2024 +0200 usb: xhci: Fix problem with xhci resume from suspend commit d44238d8254a36249d576c96473269dbe500f5e4 upstream. I have a ASUS PN51 S mini pc that has two xhci devices. One from AMD, and other from ASMEDIA. The one from ASMEDIA have problems when resume from suspend, and keep broken until unplug the power cord. I use this kernel parameter: xhci-hcd.quirks=128 and then it works ok. I make a path to reset only the ASMEDIA xhci. Signed-off-by: Jose Alberto Reguero Cc: stable Link: https://lore.kernel.org/r/20240919184202.22249-1-jose.alberto.reguero@gmail.com Signed-off-by: Greg Kroah-Hartman commit edb9ef4d88a2cd968d0fad45e3e3d24d1e9d5755 Author: Selvarasu Ganesan Date: Tue Sep 17 04:48:09 2024 +0530 usb: dwc3: core: Stop processing of pending events if controller is halted commit 0d410e8913f5cffebcca79ffdd596009d4a13a28 upstream. This commit addresses an issue where events were being processed when the controller was in a halted state. To fix this issue by stop processing the events as the event count was considered stale or invalid when the controller was halted. Fixes: fc8bb91bc83e ("usb: dwc3: implement runtime PM") Cc: stable@kernel.org Signed-off-by: Selvarasu Ganesan Suggested-by: Thinh Nguyen Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20240916231813.206-1-selvarasu.g@samsung.com Signed-off-by: Greg Kroah-Hartman commit 3ac86888fcc491b45a7c867812211acc6d5ac438 Author: Oliver Neukum Date: Mon Oct 7 11:39:47 2024 +0200 Revert "usb: yurex: Replace snprintf() with the safer scnprintf() variant" commit 71c717cd8a2e180126932cc6851ff21c1d04d69a upstream. This reverts commit 86b20af11e84c26ae3fde4dcc4f490948e3f8035. This patch leads to passing 0 to simple_read_from_buffer() as a fifth argument, turning the read method into a nop. The change is fundamentally flawed, as it breaks the driver. Signed-off-by: Oliver Neukum Cc: stable Link: https://lore.kernel.org/r/20241007094004.242122-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman commit afaec542391fea4cc5802ac23430cf870632956b Author: Wade Wang Date: Mon Sep 16 16:56:00 2024 +0800 HID: plantronics: Workaround for an unexcepted opposite volume key commit 87b696209007b7c4ef7bdfe39ea0253404a43770 upstream. Some Plantronics headset as the below send an unexcept opposite volume key's HID report for each volume key press after 200ms, like unecepted Volume Up Key following Volume Down key pressed by user. This patch adds a quirk to hid-plantronics for these devices, which will ignore the second unexcepted opposite volume key if it happens within 220ms from the last one that was handled. Plantronics EncorePro 500 Series (047f:431e) Plantronics Blackwire_3325 Series (047f:430c) The patch was tested on the mentioned model, it shouldn't affect other models, however, this quirk might be needed for them too. Auto-repeat (when a key is held pressed) is not affected per test result. Cc: stable@vger.kernel.org Signed-off-by: Wade Wang Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman commit 9957fbf34f52a4d8945d1bf39aae400ef9a11246 Author: Oliver Neukum Date: Tue Feb 15 11:35:47 2022 +0100 CDC-NCM: avoid overflow in sanity checking commit 8d2b1a1ec9f559d30b724877da4ce592edc41fdc upstream. A broken device may give an extreme offset like 0xFFF0 and a reasonable length for a fragment. In the sanity check as formulated now, this will create an integer overflow, defeating the sanity check. Both offset and offset + len need to be checked in such a manner that no overflow can occur. And those quantities should be unsigned. Signed-off-by: Oliver Neukum Reviewed-by: Greg Kroah-Hartman Signed-off-by: David S. Miller Signed-off-by: Bruno VERNAY Signed-off-by: Hugo SIMELIERE Signed-off-by: Greg Kroah-Hartman commit 333fbaf6864a4ca031367eb947961a1f3484d337 Author: Huang Ying Date: Fri Sep 6 11:07:11 2024 +0800 resource: fix region_intersects() vs add_memory_driver_managed() commit b4afe4183ec77f230851ea139d91e5cf2644c68b upstream. On a system with CXL memory, the resource tree (/proc/iomem) related to CXL memory may look like something as follows. 490000000-50fffffff : CXL Window 0 490000000-50fffffff : region0 490000000-50fffffff : dax0.0 490000000-50fffffff : System RAM (kmem) Because drivers/dax/kmem.c calls add_memory_driver_managed() during onlining CXL memory, which makes "System RAM (kmem)" a descendant of "CXL Window X". This confuses region_intersects(), which expects all "System RAM" resources to be at the top level of iomem_resource. This can lead to bugs. For example, when the following command line is executed to write some memory in CXL memory range via /dev/mem, $ dd if=data of=/dev/mem bs=$((1 << 10)) seek=$((0x490000000 >> 10)) count=1 dd: error writing '/dev/mem': Bad address 1+0 records in 0+0 records out 0 bytes copied, 0.0283507 s, 0.0 kB/s the command fails as expected. However, the error code is wrong. It should be "Operation not permitted" instead of "Bad address". More seriously, the /dev/mem permission checking in devmem_is_allowed() passes incorrectly. Although the accessing is prevented later because ioremap() isn't allowed to map system RAM, it is a potential security issue. During command executing, the following warning is reported in the kernel log for calling ioremap() on system RAM. ioremap on RAM at 0x0000000490000000 - 0x0000000490000fff WARNING: CPU: 2 PID: 416 at arch/x86/mm/ioremap.c:216 __ioremap_caller.constprop.0+0x131/0x35d Call Trace: memremap+0xcb/0x184 xlate_dev_mem_ptr+0x25/0x2f write_mem+0x94/0xfb vfs_write+0x128/0x26d ksys_write+0xac/0xfe do_syscall_64+0x9a/0xfd entry_SYSCALL_64_after_hwframe+0x4b/0x53 The details of command execution process are as follows. In the above resource tree, "System RAM" is a descendant of "CXL Window 0" instead of a top level resource. So, region_intersects() will report no System RAM resources in the CXL memory region incorrectly, because it only checks the top level resources. Consequently, devmem_is_allowed() will return 1 (allow access via /dev/mem) for CXL memory region incorrectly. Fortunately, ioremap() doesn't allow to map System RAM and reject the access. So, region_intersects() needs to be fixed to work correctly with the resource tree with "System RAM" not at top level as above. To fix it, if we found a unmatched resource in the top level, we will continue to search matched resources in its descendant resources. So, we will not miss any matched resources in resource tree anymore. In the new implementation, an example resource tree |------------- "CXL Window 0" ------------| |-- "System RAM" --| will behave similar as the following fake resource tree for region_intersects(, IORESOURCE_SYSTEM_RAM, ), |-- "System RAM" --||-- "CXL Window 0a" --| Where "CXL Window 0a" is part of the original "CXL Window 0" that isn't covered by "System RAM". Link: https://lkml.kernel.org/r/20240906030713.204292-2-ying.huang@intel.com Fixes: c221c0b0308f ("device-dax: "Hotplug" persistent memory for use like normal RAM") Signed-off-by: "Huang, Ying" Cc: Dan Williams Cc: David Hildenbrand Cc: Davidlohr Bueso Cc: Jonathan Cameron Cc: Dave Jiang Cc: Alison Schofield Cc: Vishal Verma Cc: Ira Weiny Cc: Alistair Popple Cc: Andy Shevchenko Cc: Bjorn Helgaas Cc: Baoquan He Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit a20d4f0d9e2cffb11cfeb9fd5382112fa88c3711 Author: Zhiguo Niu Date: Sat Oct 12 23:22:44 2024 +0000 lockdep: fix deadlock issue between lockdep and rcu commit a6f88ac32c6e63e69c595bfae220d8641704c9b7 upstream. There is a deadlock scenario between lockdep and rcu when rcu nocb feature is enabled, just as following call stack: rcuop/x -000|queued_spin_lock_slowpath(lock = 0xFFFFFF817F2A8A80, val = ?) -001|queued_spin_lock(inline) // try to hold nocb_gp_lock -001|do_raw_spin_lock(lock = 0xFFFFFF817F2A8A80) -002|__raw_spin_lock_irqsave(inline) -002|_raw_spin_lock_irqsave(lock = 0xFFFFFF817F2A8A80) -003|wake_nocb_gp_defer(inline) -003|__call_rcu_nocb_wake(rdp = 0xFFFFFF817F30B680) -004|__call_rcu_common(inline) -004|call_rcu(head = 0xFFFFFFC082EECC28, func = ?) -005|call_rcu_zapped(inline) -005|free_zapped_rcu(ch = ?)// hold graph lock -006|rcu_do_batch(rdp = 0xFFFFFF817F245680) -007|nocb_cb_wait(inline) -007|rcu_nocb_cb_kthread(arg = 0xFFFFFF817F245680) -008|kthread(_create = 0xFFFFFF80803122C0) -009|ret_from_fork(asm) rcuop/y -000|queued_spin_lock_slowpath(lock = 0xFFFFFFC08291BBC8, val = 0) -001|queued_spin_lock() -001|lockdep_lock() -001|graph_lock() // try to hold graph lock -002|lookup_chain_cache_add() -002|validate_chain() -003|lock_acquire -004|_raw_spin_lock_irqsave(lock = 0xFFFFFF817F211D80) -005|lock_timer_base(inline) -006|mod_timer(inline) -006|wake_nocb_gp_defer(inline)// hold nocb_gp_lock -006|__call_rcu_nocb_wake(rdp = 0xFFFFFF817F2A8680) -007|__call_rcu_common(inline) -007|call_rcu(head = 0xFFFFFFC0822E0B58, func = ?) -008|call_rcu_hurry(inline) -008|rcu_sync_call(inline) -008|rcu_sync_func(rhp = 0xFFFFFFC0822E0B58) -009|rcu_do_batch(rdp = 0xFFFFFF817F266680) -010|nocb_cb_wait(inline) -010|rcu_nocb_cb_kthread(arg = 0xFFFFFF817F266680) -011|kthread(_create = 0xFFFFFF8080363740) -012|ret_from_fork(asm) rcuop/x and rcuop/y are rcu nocb threads with the same nocb gp thread. This patch release the graph lock before lockdep call_rcu. Fixes: a0b0fd53e1e6 ("locking/lockdep: Free lock classes that are no longer in use") Cc: stable@vger.kernel.org Cc: Boqun Feng Cc: Waiman Long Cc: Carlos Llamas Cc: Bart Van Assche Signed-off-by: Zhiguo Niu Signed-off-by: Xuewen Yan Reviewed-by: Waiman Long Reviewed-by: Carlos Llamas Reviewed-by: Bart Van Assche Signed-off-by: Carlos Llamas Acked-by: Paul E. McKenney Signed-off-by: Boqun Feng Link: https://lore.kernel.org/r/20240620225436.3127927-1-cmllamas@google.com Signed-off-by: Carlos Llamas Signed-off-by: Sasha Levin commit abdc85d6305f488d881d3181ca554e615dfc124d Author: Waiman Long Date: Sat Oct 12 23:22:43 2024 +0000 locking/lockdep: Avoid potential access of invalid memory in lock_class commit 61cc4534b6550997c97a03759ab46b29d44c0017 upstream. It was found that reading /proc/lockdep after a lockdep splat may potentially cause an access to freed memory if lockdep_unregister_key() is called after the splat but before access to /proc/lockdep [1]. This is due to the fact that graph_lock() call in lockdep_unregister_key() fails after the clearing of debug_locks by the splat process. After lockdep_unregister_key() is called, the lock_name may be freed but the corresponding lock_class structure still have a reference to it. That invalid memory pointer will then be accessed when /proc/lockdep is read by a user and a use-after-free (UAF) error will be reported if KASAN is enabled. To fix this problem, lockdep_unregister_key() is now modified to always search for a matching key irrespective of the debug_locks state and zap the corresponding lock class if a matching one is found. [1] https://lore.kernel.org/lkml/77f05c15-81b6-bddd-9650-80d5f23fe330@i-love.sakura.ne.jp/ Fixes: 8b39adbee805 ("locking/lockdep: Make lockdep_unregister_key() honor 'debug_locks' again") Reported-by: Tetsuo Handa Signed-off-by: Waiman Long Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Bart Van Assche Link: https://lkml.kernel.org/r/20220103023558.1377055-1-longman@redhat.com Signed-off-by: Carlos Llamas Signed-off-by: Sasha Levin commit 991e129724c27115be83d72609831efbf95a4628 Author: Peter Zijlstra Date: Sat Oct 12 23:22:42 2024 +0000 locking/lockdep: Rework lockdep_lock commit 248efb2158f1e23750728e92ad9db3ab60c14485 upstream. A few sites want to assert we own the graph_lock/lockdep_lock, provide a more conventional lock interface for it with a number of trivial debug checks. Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20200313102107.GX12561@hirez.programming.kicks-ass.net Signed-off-by: Carlos Llamas Signed-off-by: Sasha Levin commit 60519a39aec309047c84867d2cbc7b485e514922 Author: Peter Zijlstra Date: Sat Oct 12 23:22:41 2024 +0000 locking/lockdep: Fix bad recursion pattern commit 10476e6304222ced7df9b3d5fb0a043b3c2a1ad8 upstream. There were two patterns for lockdep_recursion: Pattern-A: if (current->lockdep_recursion) return current->lockdep_recursion = 1; /* do stuff */ current->lockdep_recursion = 0; Pattern-B: current->lockdep_recursion++; /* do stuff */ current->lockdep_recursion--; But a third pattern has emerged: Pattern-C: current->lockdep_recursion = 1; /* do stuff */ current->lockdep_recursion = 0; And while this isn't broken per-se, it is highly dangerous because it doesn't nest properly. Get rid of all Pattern-C instances and shore up Pattern-A with a warning. Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20200313093325.GW12561@hirez.programming.kicks-ass.net Signed-off-by: Carlos Llamas Signed-off-by: Sasha Levin commit ba6501ea06462d6404d57d5644cf2854db38e7d7 Author: Eric Dumazet Date: Wed Oct 9 09:11:32 2024 +0000 slip: make slhc_remember() more robust against malicious packets [ Upstream commit 7d3fce8cbe3a70a1c7c06c9b53696be5d5d8dd5c ] syzbot found that slhc_remember() was missing checks against malicious packets [1]. slhc_remember() only checked the size of the packet was at least 20, which is not good enough. We need to make sure the packet includes the IPv4 and TCP header that are supposed to be carried. Add iph and th pointers to make the code more readable. [1] BUG: KMSAN: uninit-value in slhc_remember+0x2e8/0x7b0 drivers/net/slip/slhc.c:666 slhc_remember+0x2e8/0x7b0 drivers/net/slip/slhc.c:666 ppp_receive_nonmp_frame+0xe45/0x35e0 drivers/net/ppp/ppp_generic.c:2455 ppp_receive_frame drivers/net/ppp/ppp_generic.c:2372 [inline] ppp_do_recv+0x65f/0x40d0 drivers/net/ppp/ppp_generic.c:2212 ppp_input+0x7dc/0xe60 drivers/net/ppp/ppp_generic.c:2327 pppoe_rcv_core+0x1d3/0x720 drivers/net/ppp/pppoe.c:379 sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1113 __release_sock+0x1da/0x330 net/core/sock.c:3072 release_sock+0x6b/0x250 net/core/sock.c:3626 pppoe_sendmsg+0x2b8/0xb90 drivers/net/ppp/pppoe.c:903 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4091 [inline] slab_alloc_node mm/slub.c:4134 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4186 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1322 [inline] sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2732 pppoe_sendmsg+0x3a7/0xb90 drivers/net/ppp/pppoe.c:867 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 5460 Comm: syz.2.33 Not tainted 6.12.0-rc2-syzkaller-00006-g87d6aab2389e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Fixes: b5451d783ade ("slip: Move the SLIP drivers") Reported-by: syzbot+2ada1bc857496353be5a@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/670646db.050a0220.3f80e.0027.GAE@google.com/T/#u Signed-off-by: Eric Dumazet Link: https://patch.msgid.link/20241009091132.2136321-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 8dfe93901b410ae41264087427f3b9f389388f83 Author: Eric Dumazet Date: Wed Oct 9 18:58:02 2024 +0000 ppp: fix ppp_async_encode() illegal access [ Upstream commit 40dddd4b8bd08a69471efd96107a4e1c73fabefc ] syzbot reported an issue in ppp_async_encode() [1] In this case, pppoe_sendmsg() is called with a zero size. Then ppp_async_encode() is called with an empty skb. BUG: KMSAN: uninit-value in ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline] BUG: KMSAN: uninit-value in ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675 ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline] ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675 ppp_async_send+0x130/0x1b0 drivers/net/ppp/ppp_async.c:634 ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2280 [inline] ppp_input+0x1f1/0xe60 drivers/net/ppp/ppp_generic.c:2304 pppoe_rcv_core+0x1d3/0x720 drivers/net/ppp/pppoe.c:379 sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1113 __release_sock+0x1da/0x330 net/core/sock.c:3072 release_sock+0x6b/0x250 net/core/sock.c:3626 pppoe_sendmsg+0x2b8/0xb90 drivers/net/ppp/pppoe.c:903 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4092 [inline] slab_alloc_node mm/slub.c:4135 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4187 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1322 [inline] sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2732 pppoe_sendmsg+0x3a7/0xb90 drivers/net/ppp/pppoe.c:867 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 1 UID: 0 PID: 5411 Comm: syz.1.14 Not tainted 6.12.0-rc1-syzkaller-00165-g360c1f1f24c6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+1d121645899e7692f92a@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet Reviewed-by: Simon Horman Link: https://patch.msgid.link/20241009185802.3763282-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 38a35450f30ca0c1a51efef0f94c1659304c00e7 Author: Xin Long Date: Mon Oct 7 12:25:11 2024 -0400 sctp: ensure sk_state is set to CLOSED if hashing fails in sctp_listen_start [ Upstream commit 4d5c70e6155d5eae198bade4afeab3c1b15073b6 ] If hashing fails in sctp_listen_start(), the socket remains in the LISTENING state, even though it was not added to the hash table. This can lead to a scenario where a socket appears to be listening without actually being accessible. This patch ensures that if the hashing operation fails, the sk_state is set back to CLOSED before returning an error. Note that there is no need to undo the autobind operation if hashing fails, as the bind port can still be used for next listen() call on the same socket. Fixes: 76c6d988aeb3 ("sctp: add sock_reuseport for the sock in __sctp_hash_endpoint") Reported-by: Marcelo Ricardo Leitner Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit ed494a60503807eb7e659d0a3e7b3dfe3fe67ffb Author: Eric Dumazet Date: Tue Nov 5 14:11:54 2019 -0800 net: annotate lockless accesses to sk->sk_max_ack_backlog [ Upstream commit 099ecf59f05b5f30f42ebac0ab8cb94f9b18c90c ] sk->sk_max_ack_backlog can be read without any lock being held at least in TCP/DCCP cases. We need to use READ_ONCE()/WRITE_ONCE() to avoid load/store tearing and/or potential KCSAN warnings. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Stable-dep-of: 4d5c70e6155d ("sctp: ensure sk_state is set to CLOSED if hashing fails in sctp_listen_start") Signed-off-by: Sasha Levin commit e9b8a2629e051370a2613d323a5bc9fafb769e72 Author: Eric Dumazet Date: Tue Nov 5 14:11:53 2019 -0800 net: annotate lockless accesses to sk->sk_ack_backlog [ Upstream commit 288efe8606b62d0753ba6722b36ef241877251fd ] sk->sk_ack_backlog can be read without any lock being held. We need to use READ_ONCE()/WRITE_ONCE() to avoid load/store tearing and/or potential KCSAN warnings. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Stable-dep-of: 4d5c70e6155d ("sctp: ensure sk_state is set to CLOSED if hashing fails in sctp_listen_start") Signed-off-by: Sasha Levin commit e2882b46774c4695f8d48a82a9c7bed4cafd8109 Author: Rosen Penev Date: Mon Oct 7 16:57:11 2024 -0700 net: ibm: emac: mal: fix wrong goto [ Upstream commit 08c8acc9d8f3f70d62dd928571368d5018206490 ] dcr_map is called in the previous if and therefore needs to be unmapped. Fixes: 1ff0fcfcb1a6 ("ibm_newemac: Fix new MAL feature handling") Signed-off-by: Rosen Penev Link: https://patch.msgid.link/20241007235711.5714-1-rosenp@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 2acbb9539bc2284e30d2aeb789c3d96287014264 Author: Eric Dumazet Date: Mon Oct 7 18:41:30 2024 +0000 net/sched: accept TCA_STAB only for root qdisc [ Upstream commit 3cb7cf1540ddff5473d6baeb530228d19bc97b8a ] Most qdiscs maintain their backlog using qdisc_pkt_len(skb) on the assumption it is invariant between the enqueue() and dequeue() handlers. Unfortunately syzbot can crash a host rather easily using a TBF + SFQ combination, with an STAB on SFQ [1] We can't support TCA_STAB on arbitrary level, this would require to maintain per-qdisc storage. [1] [ 88.796496] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 88.798611] #PF: supervisor read access in kernel mode [ 88.799014] #PF: error_code(0x0000) - not-present page [ 88.799506] PGD 0 P4D 0 [ 88.799829] Oops: Oops: 0000 [#1] SMP NOPTI [ 88.800569] CPU: 14 UID: 0 PID: 2053 Comm: b371744477 Not tainted 6.12.0-rc1-virtme #1117 [ 88.801107] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 88.801779] RIP: 0010:sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq [ 88.802544] Code: 0f b7 50 12 48 8d 04 d5 00 00 00 00 48 89 d6 48 29 d0 48 8b 91 c0 01 00 00 48 c1 e0 03 48 01 c2 66 83 7a 1a 00 7e c0 48 8b 3a <4c> 8b 07 4c 89 02 49 89 50 08 48 c7 47 08 00 00 00 00 48 c7 07 00 All code ======== 0: 0f b7 50 12 movzwl 0x12(%rax),%edx 4: 48 8d 04 d5 00 00 00 lea 0x0(,%rdx,8),%rax b: 00 c: 48 89 d6 mov %rdx,%rsi f: 48 29 d0 sub %rdx,%rax 12: 48 8b 91 c0 01 00 00 mov 0x1c0(%rcx),%rdx 19: 48 c1 e0 03 shl $0x3,%rax 1d: 48 01 c2 add %rax,%rdx 20: 66 83 7a 1a 00 cmpw $0x0,0x1a(%rdx) 25: 7e c0 jle 0xffffffffffffffe7 27: 48 8b 3a mov (%rdx),%rdi 2a:* 4c 8b 07 mov (%rdi),%r8 <-- trapping instruction 2d: 4c 89 02 mov %r8,(%rdx) 30: 49 89 50 08 mov %rdx,0x8(%r8) 34: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi) 3b: 00 3c: 48 rex.W 3d: c7 .byte 0xc7 3e: 07 (bad) ... Code starting with the faulting instruction =========================================== 0: 4c 8b 07 mov (%rdi),%r8 3: 4c 89 02 mov %r8,(%rdx) 6: 49 89 50 08 mov %rdx,0x8(%r8) a: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi) 11: 00 12: 48 rex.W 13: c7 .byte 0xc7 14: 07 (bad) ... [ 88.803721] RSP: 0018:ffff9a1f892b7d58 EFLAGS: 00000206 [ 88.804032] RAX: 0000000000000000 RBX: ffff9a1f8420c800 RCX: ffff9a1f8420c800 [ 88.804560] RDX: ffff9a1f81bc1440 RSI: 0000000000000000 RDI: 0000000000000000 [ 88.805056] RBP: ffffffffc04bb0e0 R08: 0000000000000001 R09: 00000000ff7f9a1f [ 88.805473] R10: 000000000001001b R11: 0000000000009a1f R12: 0000000000000140 [ 88.806194] R13: 0000000000000001 R14: ffff9a1f886df400 R15: ffff9a1f886df4ac [ 88.806734] FS: 00007f445601a740(0000) GS:ffff9a2e7fd80000(0000) knlGS:0000000000000000 [ 88.807225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 88.807672] CR2: 0000000000000000 CR3: 000000050cc46000 CR4: 00000000000006f0 [ 88.808165] Call Trace: [ 88.808459] [ 88.808710] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434) [ 88.809261] ? page_fault_oops (arch/x86/mm/fault.c:715) [ 88.809561] ? exc_page_fault (./arch/x86/include/asm/irqflags.h:26 ./arch/x86/include/asm/irqflags.h:87 ./arch/x86/include/asm/irqflags.h:147 arch/x86/mm/fault.c:1489 arch/x86/mm/fault.c:1539) [ 88.809806] ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623) [ 88.810074] ? sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq [ 88.810411] sfq_reset (net/sched/sch_sfq.c:525) sch_sfq [ 88.810671] qdisc_reset (./include/linux/skbuff.h:2135 ./include/linux/skbuff.h:2441 ./include/linux/skbuff.h:3304 ./include/linux/skbuff.h:3310 net/sched/sch_generic.c:1036) [ 88.810950] tbf_reset (./include/linux/timekeeping.h:169 net/sched/sch_tbf.c:334) sch_tbf [ 88.811208] qdisc_reset (./include/linux/skbuff.h:2135 ./include/linux/skbuff.h:2441 ./include/linux/skbuff.h:3304 ./include/linux/skbuff.h:3310 net/sched/sch_generic.c:1036) [ 88.811484] netif_set_real_num_tx_queues (./include/linux/spinlock.h:396 ./include/net/sch_generic.h:768 net/core/dev.c:2958) [ 88.811870] __tun_detach (drivers/net/tun.c:590 drivers/net/tun.c:673) [ 88.812271] tun_chr_close (drivers/net/tun.c:702 drivers/net/tun.c:3517) [ 88.812505] __fput (fs/file_table.c:432 (discriminator 1)) [ 88.812735] task_work_run (kernel/task_work.c:230) [ 88.813016] do_exit (kernel/exit.c:940) [ 88.813372] ? trace_hardirqs_on (kernel/trace/trace_preemptirq.c:58 (discriminator 4)) [ 88.813639] ? handle_mm_fault (./arch/x86/include/asm/irqflags.h:42 ./arch/x86/include/asm/irqflags.h:97 ./arch/x86/include/asm/irqflags.h:155 ./include/linux/memcontrol.h:1022 ./include/linux/memcontrol.h:1045 ./include/linux/memcontrol.h:1052 mm/memory.c:5928 mm/memory.c:6088) [ 88.813867] do_group_exit (kernel/exit.c:1070) [ 88.814138] __x64_sys_exit_group (kernel/exit.c:1099) [ 88.814490] x64_sys_call (??:?) [ 88.814791] do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) [ 88.815012] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) [ 88.815495] RIP: 0033:0x7f44560f1975 Fixes: 175f9c1bba9b ("net_sched: Add size table for qdiscs") Reported-by: syzbot Signed-off-by: Eric Dumazet Cc: Daniel Borkmann Link: https://patch.msgid.link/20241007184130.3960565-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit c92cbd283ddcf55fd85a9a9b0ba13298213f3dd7 Author: Mohamed Khalfella Date: Tue Sep 24 15:06:01 2024 -0600 igb: Do not bring the device up after non-fatal error [ Upstream commit 330a699ecbfc9c26ec92c6310686da1230b4e7eb ] Commit 004d25060c78 ("igb: Fix igb_down hung on surprise removal") changed igb_io_error_detected() to ignore non-fatal pcie errors in order to avoid hung task that can happen when igb_down() is called multiple times. This caused an issue when processing transient non-fatal errors. igb_io_resume(), which is called after igb_io_error_detected(), assumes that device is brought down by igb_io_error_detected() if the interface is up. This resulted in panic with stacktrace below. [ T3256] igb 0000:09:00.0 haeth0: igb: haeth0 NIC Link is Down [ T292] pcieport 0000:00:1c.5: AER: Uncorrected (Non-Fatal) error received: 0000:09:00.0 [ T292] igb 0000:09:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID) [ T292] igb 0000:09:00.0: device [8086:1537] error status/mask=00004000/00000000 [ T292] igb 0000:09:00.0: [14] CmpltTO [ 200.105524,009][ T292] igb 0000:09:00.0: AER: TLP Header: 00000000 00000000 00000000 00000000 [ T292] pcieport 0000:00:1c.5: AER: broadcast error_detected message [ T292] igb 0000:09:00.0: Non-correctable non-fatal error reported. [ T292] pcieport 0000:00:1c.5: AER: broadcast mmio_enabled message [ T292] pcieport 0000:00:1c.5: AER: broadcast resume message [ T292] ------------[ cut here ]------------ [ T292] kernel BUG at net/core/dev.c:6539! [ T292] invalid opcode: 0000 [#1] PREEMPT SMP [ T292] RIP: 0010:napi_enable+0x37/0x40 [ T292] Call Trace: [ T292] [ T292] ? die+0x33/0x90 [ T292] ? do_trap+0xdc/0x110 [ T292] ? napi_enable+0x37/0x40 [ T292] ? do_error_trap+0x70/0xb0 [ T292] ? napi_enable+0x37/0x40 [ T292] ? napi_enable+0x37/0x40 [ T292] ? exc_invalid_op+0x4e/0x70 [ T292] ? napi_enable+0x37/0x40 [ T292] ? asm_exc_invalid_op+0x16/0x20 [ T292] ? napi_enable+0x37/0x40 [ T292] igb_up+0x41/0x150 [ T292] igb_io_resume+0x25/0x70 [ T292] report_resume+0x54/0x70 [ T292] ? report_frozen_detected+0x20/0x20 [ T292] pci_walk_bus+0x6c/0x90 [ T292] ? aer_print_port_info+0xa0/0xa0 [ T292] pcie_do_recovery+0x22f/0x380 [ T292] aer_process_err_devices+0x110/0x160 [ T292] aer_isr+0x1c1/0x1e0 [ T292] ? disable_irq_nosync+0x10/0x10 [ T292] irq_thread_fn+0x1a/0x60 [ T292] irq_thread+0xe3/0x1a0 [ T292] ? irq_set_affinity_notifier+0x120/0x120 [ T292] ? irq_affinity_notify+0x100/0x100 [ T292] kthread+0xe2/0x110 [ T292] ? kthread_complete_and_exit+0x20/0x20 [ T292] ret_from_fork+0x2d/0x50 [ T292] ? kthread_complete_and_exit+0x20/0x20 [ T292] ret_from_fork_asm+0x11/0x20 [ T292] To fix this issue igb_io_resume() checks if the interface is running and the device is not down this means igb_io_error_detected() did not bring the device down and there is no need to bring it up. Signed-off-by: Mohamed Khalfella Reviewed-by: Yuanyuan Zhong Fixes: 004d25060c78 ("igb: Fix igb_down hung on surprise removal") Reviewed-by: Simon Horman Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin commit 4fdc7ce5f300374695a13ef1e9ae01ab065ca7f9 Author: Billy Tsai Date: Tue Oct 8 16:14:45 2024 +0800 gpio: aspeed: Use devm_clk api to manage clock source [ Upstream commit a6191a3d18119184237f4ee600039081ad992320 ] Replace of_clk_get with devm_clk_get_enabled to manage the clock source. Fixes: 5ae4cb94b313 ("gpio: aspeed: Add debounce support") Reviewed-by: Andrew Jeffery Signed-off-by: Billy Tsai Link: https://lore.kernel.org/r/20241008081450.1490955-3-billy_tsai@aspeedtech.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin commit eda428e573c877ba1cfc87a7925090ef7391fdfd Author: Billy Tsai Date: Tue Oct 8 16:14:44 2024 +0800 gpio: aspeed: Add the flush write to ensure the write complete. [ Upstream commit 1bb5a99e1f3fd27accb804aa0443a789161f843c ] Performing a dummy read ensures that the register write operation is fully completed, mitigating any potential bus delays that could otherwise impact the frequency of bitbang usage. E.g., if the JTAG application uses GPIO to control the JTAG pins (TCK, TMS, TDI, TDO, and TRST), and the application sets the TCK clock to 1 MHz, the GPIO's high/low transitions will rely on a delay function to ensure the clock frequency does not exceed 1 MHz. However, this can lead to rapid toggling of the GPIO because the write operation is POSTed and does not wait for a bus acknowledgment. Fixes: 361b79119a4b ("gpio: Add Aspeed driver") Reviewed-by: Andrew Jeffery Signed-off-by: Billy Tsai Link: https://lore.kernel.org/r/20241008081450.1490955-2-billy_tsai@aspeedtech.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin commit 869c6ee62ab8f01bf2419e45326642be5c9b670a Author: Luiz Augusto von Dentz Date: Mon Sep 30 13:26:21 2024 -0400 Bluetooth: RFCOMM: FIX possible deadlock in rfcomm_sk_state_change [ Upstream commit 08d1914293dae38350b8088980e59fbc699a72fe ] rfcomm_sk_state_change attempts to use sock_lock so it must never be called with it locked but rfcomm_sock_ioctl always attempt to lock it causing the following trace: ====================================================== WARNING: possible circular locking dependency detected 6.8.0-syzkaller-08951-gfe46a7dd189e #0 Not tainted ------------------------------------------------------ syz-executor386/5093 is trying to acquire lock: ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1671 [inline] ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: rfcomm_sk_state_change+0x5b/0x310 net/bluetooth/rfcomm/sock.c:73 but task is already holding lock: ffff88807badfd28 (&d->lock){+.+.}-{3:3}, at: __rfcomm_dlc_close+0x226/0x6a0 net/bluetooth/rfcomm/core.c:491 Reported-by: syzbot+d7ce59b06b3eb14fd218@syzkaller.appspotmail.com Tested-by: syzbot+d7ce59b06b3eb14fd218@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d7ce59b06b3eb14fd218 Fixes: 3241ad820dbb ("[Bluetooth] Add timestamp support to L2CAP, RFCOMM and SCO") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit 75dfcb758015c97e1accd6340691fca67d363bed Author: Andy Roulin Date: Tue Oct 1 08:43:59 2024 -0700 netfilter: br_netfilter: fix panic with metadata_dst skb [ Upstream commit f9ff7665cd128012868098bbd07e28993e314fdb ] Fix a kernel panic in the br_netfilter module when sending untagged traffic via a VxLAN device. This happens during the check for fragmentation in br_nf_dev_queue_xmit. It is dependent on: 1) the br_netfilter module being loaded; 2) net.bridge.bridge-nf-call-iptables set to 1; 3) a bridge with a VxLAN (single-vxlan-device) netdevice as a bridge port; 4) untagged frames with size higher than the VxLAN MTU forwarded/flooded When forwarding the untagged packet to the VxLAN bridge port, before the netfilter hooks are called, br_handle_egress_vlan_tunnel is called and changes the skb_dst to the tunnel dst. The tunnel_dst is a metadata type of dst, i.e., skb_valid_dst(skb) is false, and metadata->dst.dev is NULL. Then in the br_netfilter hooks, in br_nf_dev_queue_xmit, there's a check for frames that needs to be fragmented: frames with higher MTU than the VxLAN device end up calling br_nf_ip_fragment, which in turns call ip_skb_dst_mtu. The ip_dst_mtu tries to use the skb_dst(skb) as if it was a valid dst with valid dst->dev, thus the crash. This case was never supported in the first place, so drop the packet instead. PING 10.0.0.2 (10.0.0.2) from 0.0.0.0 h1-eth0: 2000(2028) bytes of data. [ 176.291791] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000110 [ 176.292101] Mem abort info: [ 176.292184] ESR = 0x0000000096000004 [ 176.292322] EC = 0x25: DABT (current EL), IL = 32 bits [ 176.292530] SET = 0, FnV = 0 [ 176.292709] EA = 0, S1PTW = 0 [ 176.292862] FSC = 0x04: level 0 translation fault [ 176.293013] Data abort info: [ 176.293104] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 176.293488] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 176.293787] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 176.293995] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000043ef5000 [ 176.294166] [0000000000000110] pgd=0000000000000000, p4d=0000000000000000 [ 176.294827] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 176.295252] Modules linked in: vxlan ip6_udp_tunnel udp_tunnel veth br_netfilter bridge stp llc ipv6 crct10dif_ce [ 176.295923] CPU: 0 PID: 188 Comm: ping Not tainted 6.8.0-rc3-g5b3fbd61b9d1 #2 [ 176.296314] Hardware name: linux,dummy-virt (DT) [ 176.296535] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 176.296808] pc : br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.297382] lr : br_nf_dev_queue_xmit+0x2ac/0x4ec [br_netfilter] [ 176.297636] sp : ffff800080003630 [ 176.297743] x29: ffff800080003630 x28: 0000000000000008 x27: ffff6828c49ad9f8 [ 176.298093] x26: ffff6828c49ad000 x25: 0000000000000000 x24: 00000000000003e8 [ 176.298430] x23: 0000000000000000 x22: ffff6828c4960b40 x21: ffff6828c3b16d28 [ 176.298652] x20: ffff6828c3167048 x19: ffff6828c3b16d00 x18: 0000000000000014 [ 176.298926] x17: ffffb0476322f000 x16: ffffb7e164023730 x15: 0000000095744632 [ 176.299296] x14: ffff6828c3f1c880 x13: 0000000000000002 x12: ffffb7e137926a70 [ 176.299574] x11: 0000000000000001 x10: ffff6828c3f1c898 x9 : 0000000000000000 [ 176.300049] x8 : ffff6828c49bf070 x7 : 0008460f18d5f20e x6 : f20e0100bebafeca [ 176.300302] x5 : ffff6828c7f918fe x4 : ffff6828c49bf070 x3 : 0000000000000000 [ 176.300586] x2 : 0000000000000000 x1 : ffff6828c3c7ad00 x0 : ffff6828c7f918f0 [ 176.300889] Call trace: [ 176.301123] br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.301411] br_nf_post_routing+0x2a8/0x3e4 [br_netfilter] [ 176.301703] nf_hook_slow+0x48/0x124 [ 176.302060] br_forward_finish+0xc8/0xe8 [bridge] [ 176.302371] br_nf_hook_thresh+0x124/0x134 [br_netfilter] [ 176.302605] br_nf_forward_finish+0x118/0x22c [br_netfilter] [ 176.302824] br_nf_forward_ip.part.0+0x264/0x290 [br_netfilter] [ 176.303136] br_nf_forward+0x2b8/0x4e0 [br_netfilter] [ 176.303359] nf_hook_slow+0x48/0x124 [ 176.303803] __br_forward+0xc4/0x194 [bridge] [ 176.304013] br_flood+0xd4/0x168 [bridge] [ 176.304300] br_handle_frame_finish+0x1d4/0x5c4 [bridge] [ 176.304536] br_nf_hook_thresh+0x124/0x134 [br_netfilter] [ 176.304978] br_nf_pre_routing_finish+0x29c/0x494 [br_netfilter] [ 176.305188] br_nf_pre_routing+0x250/0x524 [br_netfilter] [ 176.305428] br_handle_frame+0x244/0x3cc [bridge] [ 176.305695] __netif_receive_skb_core.constprop.0+0x33c/0xecc [ 176.306080] __netif_receive_skb_one_core+0x40/0x8c [ 176.306197] __netif_receive_skb+0x18/0x64 [ 176.306369] process_backlog+0x80/0x124 [ 176.306540] __napi_poll+0x38/0x17c [ 176.306636] net_rx_action+0x124/0x26c [ 176.306758] __do_softirq+0x100/0x26c [ 176.307051] ____do_softirq+0x10/0x1c [ 176.307162] call_on_irq_stack+0x24/0x4c [ 176.307289] do_softirq_own_stack+0x1c/0x2c [ 176.307396] do_softirq+0x54/0x6c [ 176.307485] __local_bh_enable_ip+0x8c/0x98 [ 176.307637] __dev_queue_xmit+0x22c/0xd28 [ 176.307775] neigh_resolve_output+0xf4/0x1a0 [ 176.308018] ip_finish_output2+0x1c8/0x628 [ 176.308137] ip_do_fragment+0x5b4/0x658 [ 176.308279] ip_fragment.constprop.0+0x48/0xec [ 176.308420] __ip_finish_output+0xa4/0x254 [ 176.308593] ip_finish_output+0x34/0x130 [ 176.308814] ip_output+0x6c/0x108 [ 176.308929] ip_send_skb+0x50/0xf0 [ 176.309095] ip_push_pending_frames+0x30/0x54 [ 176.309254] raw_sendmsg+0x758/0xaec [ 176.309568] inet_sendmsg+0x44/0x70 [ 176.309667] __sys_sendto+0x110/0x178 [ 176.309758] __arm64_sys_sendto+0x28/0x38 [ 176.309918] invoke_syscall+0x48/0x110 [ 176.310211] el0_svc_common.constprop.0+0x40/0xe0 [ 176.310353] do_el0_svc+0x1c/0x28 [ 176.310434] el0_svc+0x34/0xb4 [ 176.310551] el0t_64_sync_handler+0x120/0x12c [ 176.310690] el0t_64_sync+0x190/0x194 [ 176.311066] Code: f9402e61 79402aa2 927ff821 f9400023 (f9408860) [ 176.315743] ---[ end trace 0000000000000000 ]--- [ 176.316060] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 176.316371] Kernel Offset: 0x37e0e3000000 from 0xffff800080000000 [ 176.316564] PHYS_OFFSET: 0xffff97d780000000 [ 176.316782] CPU features: 0x0,88000203,3c020000,0100421b [ 176.317210] Memory Limit: none [ 176.317527] ---[ end Kernel panic - not syncing: Oops: Fatal Exception in interrupt ]---\ Fixes: 11538d039ac6 ("bridge: vlan dst_metadata hooks in ingress and egress paths") Reviewed-by: Ido Schimmel Signed-off-by: Andy Roulin Acked-by: Nikolay Aleksandrov Link: https://patch.msgid.link/20241001154400.22787-2-aroulin@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit b56fc6407e7b73361ee36ff7b2ef959319961030 Author: Neal Cardwell Date: Tue Oct 1 20:05:16 2024 +0000 tcp: fix tcp_enter_recovery() to zero retrans_stamp when it's safe [ Upstream commit b41b4cbd9655bcebcce941bef3601db8110335be ] Fix tcp_enter_recovery() so that if there are no retransmits out then we zero retrans_stamp when entering fast recovery. This is necessary to fix two buggy behaviors. Currently a non-zero retrans_stamp value can persist across multiple back-to-back loss recovery episodes. This is because we generally only clears retrans_stamp if we are completely done with loss recoveries, and get to tcp_try_to_open() and find !tcp_any_retrans_done(sk). This behavior causes two bugs: (1) When a loss recovery episode (CA_Loss or CA_Recovery) is followed immediately by a new CA_Recovery, the retrans_stamp value can persist and can be a time before this new CA_Recovery episode starts. That means that timestamp-based undo will be using the wrong retrans_stamp (a value that is too old) when comparing incoming TS ecr values to retrans_stamp to see if the current fast recovery episode can be undone. (2) If there is a roughly minutes-long sequence of back-to-back fast recovery episodes, one after another (e.g. in a shallow-buffered or policed bottleneck), where each fast recovery successfully makes forward progress and recovers one window of sequence space (but leaves at least one retransmit in flight at the end of the recovery), followed by several RTOs, then the ETIMEDOUT check may be using the wrong retrans_stamp (a value set at the start of the first fast recovery in the sequence). This can cause a very premature ETIMEDOUT, killing the connection prematurely. This commit changes the code to zero retrans_stamp when entering fast recovery, when this is known to be safe (no retransmits are out in the network). That ensures that when starting a fast recovery episode, and it is safe to do so, retrans_stamp is set when we send the fast retransmit packet. That addresses both bug (1) and bug (2) by ensuring that (if no retransmits are out when we start a fast recovery) we use the initial fast retransmit of this fast recovery as the time value for undo and ETIMEDOUT calculations. This makes intuitive sense, since the start of a new fast recovery episode (in a scenario where no lost packets are out in the network) means that the connection has made forward progress since the last RTO or fast recovery, and we should thus "restart the clock" used for both undo and ETIMEDOUT logic. Note that if when we start fast recovery there *are* retransmits out in the network, there can still be undesirable (1)/(2) issues. For example, after this patch we can still have the (1) and (2) problems in cases like this: + round 1: sender sends flight 1 + round 2: sender receives SACKs and enters fast recovery 1, retransmits some packets in flight 1 and then sends some new data as flight 2 + round 3: sender receives some SACKs for flight 2, notes losses, and retransmits some packets to fill the holes in flight 2 + fast recovery has some lost retransmits in flight 1 and continues for one or more rounds sending retransmits for flight 1 and flight 2 + fast recovery 1 completes when snd_una reaches high_seq at end of flight 1 + there are still holes in the SACK scoreboard in flight 2, so we enter fast recovery 2, but some retransmits in the flight 2 sequence range are still in flight (retrans_out > 0), so we can't execute the new retrans_stamp=0 added here to clear retrans_stamp It's not yet clear how to fix these remaining (1)/(2) issues in an efficient way without breaking undo behavior, given that retrans_stamp is currently used for undo and ETIMEDOUT. Perhaps the optimal (but expensive) strategy would be to set retrans_stamp to the timestamp of the earliest outstanding retransmit when entering fast recovery. But at least this commit makes things better. Note that this does not change the semantics of retrans_stamp; it simply makes retrans_stamp accurate in some cases where it was not before: (1) Some loss recovery, followed by an immediate entry into a fast recovery, where there are no retransmits out when entering the fast recovery. (2) When a TFO server has a SYNACK retransmit that sets retrans_stamp, and then the ACK that completes the 3-way handshake has SACK blocks that trigger a fast recovery. In this case when entering fast recovery we want to zero out the retrans_stamp from the TFO SYNACK retransmit, and set the retrans_stamp based on the timestamp of the fast recovery. We introduce a tcp_retrans_stamp_cleanup() helper, because this two-line sequence already appears in 3 places and is about to appear in 2 more as a result of this bug fix patch series. Once this bug fix patches series in the net branch makes it into the net-next branch we'll update the 3 other call sites to use the new helper. This is a long-standing issue. The Fixes tag below is chosen to be the oldest commit at which the patch will apply cleanly, which is from Linux v3.5 in 2012. Fixes: 1fbc340514fc ("tcp: early retransmit: tcp_enter_recovery()") Signed-off-by: Neal Cardwell Signed-off-by: Yuchung Cheng Signed-off-by: Eric Dumazet Link: https://patch.msgid.link/20241001200517.2756803-3-ncardwell.sw@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit ff81628202b7433df450f909d24232ed7bc10070 Author: Neal Cardwell Date: Tue Oct 1 20:05:15 2024 +0000 tcp: fix to allow timestamp undo if no retransmits were sent [ Upstream commit e37ab7373696e650d3b6262a5b882aadad69bb9e ] Fix the TCP loss recovery undo logic in tcp_packet_delayed() so that it can trigger undo even if TSQ prevents a fast recovery episode from reaching tcp_retransmit_skb(). Geumhwan Yu recently reported that after this commit from 2019: commit bc9f38c8328e ("tcp: avoid unconditional congestion window undo on SYN retransmit") ...and before this fix we could have buggy scenarios like the following: + Due to reordering, a TCP connection receives some SACKs and enters a spurious fast recovery. + TSQ prevents all invocations of tcp_retransmit_skb(), because many skbs are queued in lower layers of the sending machine's network stack; thus tp->retrans_stamp remains 0. + The connection receives a TCP timestamp ECR value echoing a timestamp before the fast recovery, indicating that the fast recovery was spurious. + The connection fails to undo the spurious fast recovery because tp->retrans_stamp is 0, and thus tcp_packet_delayed() returns false, due to the new logic in the 2019 commit: commit bc9f38c8328e ("tcp: avoid unconditional congestion window undo on SYN retransmit") This fix tweaks the logic to be more similar to the tcp_packet_delayed() logic before bc9f38c8328e, except that we take care not to be fooled by the FLAG_SYN_ACKED code path zeroing out tp->retrans_stamp (the bug noted and fixed by Yuchung in bc9f38c8328e). Note that this returns the high-level behavior of tcp_packet_delayed() to again match the comment for the function, which says: "Nothing was retransmitted or returned timestamp is less than timestamp of the first retransmission." Note that this comment is in the original 2005-04-16 Linux git commit, so this is evidently long-standing behavior. Fixes: bc9f38c8328e ("tcp: avoid unconditional congestion window undo on SYN retransmit") Reported-by: Geumhwan Yu Diagnosed-by: Geumhwan Yu Signed-off-by: Neal Cardwell Signed-off-by: Yuchung Cheng Signed-off-by: Eric Dumazet Link: https://patch.msgid.link/20241001200517.2756803-2-ncardwell.sw@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit dcd96d735287f5e3f8d4d9ceb0203bc9de80498e Author: Dan Carpenter Date: Thu Sep 19 11:50:33 2024 +0300 SUNRPC: Fix integer overflow in decode_rc_list() [ Upstream commit 6dbf1f341b6b35bcc20ff95b6b315e509f6c5369 ] The math in "rc_list->rcl_nrefcalls * 2 * sizeof(uint32_t)" could have an integer overflow. Add bounds checking on rc_list->rcl_nrefcalls to fix that. Fixes: 4aece6a19cf7 ("nfs41: cb_sequence xdr implementation") Signed-off-by: Dan Carpenter Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit 761bcde586e11b9ab86ea6c9784c090511095552 Author: Dave Ertman Date: Wed Sep 18 14:02:56 2024 -0400 ice: fix VLAN replay after reset [ Upstream commit 0eae2c136cb624e4050092feb59f18159b4f2512 ] There is a bug currently when there are more than one VLAN defined and any reset that affects the PF is initiated, after the reset rebuild no traffic will pass on any VLAN but the last one created. This is caused by the iteration though the VLANs during replay each clearing the vsi_map bitmap of the VSI that is being replayed. The problem is that during rhe replay, the pointer to the vsi_map bitmap is used by each successive vlan to determine if it should be replayed on this VSI. The logic was that the replay of the VLAN would replace the bit in the map before the next VLAN would iterate through. But, since the replay copies the old bitmap pointer to filt_replay_rules and creates a new one for the recreated VLANS, it does not do this, and leaves the old bitmap broken to be used to replay the remaining VLANs. Since the old bitmap will be cleaned up in post replay cleanup, there is no need to alter it and break following VLAN replay, so don't clear the bit. Fixes: 334cb0626de1 ("ice: Implement VSI replay framework") Reviewed-by: Przemek Kitszel Signed-off-by: Dave Ertman Reviewed-by: Jacob Keller Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin commit c91fb72a2ca6480d8d77262eef52dc5b178463a3 Author: Bob Pearson Date: Fri Mar 29 09:55:04 2024 -0500 RDMA/rxe: Fix seg fault in rxe_comp_queue_pkt commit 2b23b6097303ed0ba5f4bc036a1c07b6027af5c6 upstream. In rxe_comp_queue_pkt() an incoming response packet skb is enqueued to the resp_pkts queue and then a decision is made whether to run the completer task inline or schedule it. Finally the skb is dereferenced to bump a 'hw' performance counter. This is wrong because if the completer task is already running in a separate thread it may have already processed the skb and freed it which can cause a seg fault. This has been observed infrequently in testing at high scale. This patch fixes this by changing the order of enqueuing the packet until after the counter is accessed. Link: https://lore.kernel.org/r/20240329145513.35381-4-rpearsonhpe@gmail.com Signed-off-by: Bob Pearson Fixes: 0b1e5b99a48b ("IB/rxe: Add port protocol stats") Signed-off-by: Jason Gunthorpe [Sherry: bp to fix CVE-2024-38544. Fix conflict due to missing commit: dccb23f6c312 ("RDMA/rxe: Split rxe_run_task() into two subroutines") which is not necessary to backport] Signed-off-by: Sherry Yang Signed-off-by: Greg Kroah-Hartman commit 57c4f4db0a194416da237fd09dad9527e00cb587 Author: Andrey Shumilin Date: Fri Sep 27 22:34:24 2024 +0300 fbdev: sisfb: Fix strbuf array overflow [ Upstream commit 9cf14f5a2746c19455ce9cb44341b5527b5e19c3 ] The values of the variables xres and yres are placed in strbuf. These variables are obtained from strbuf1. The strbuf1 array contains digit characters and a space if the array contains non-digit characters. Then, when executing sprintf(strbuf, "%ux%ux8", xres, yres); more than 16 bytes will be written to strbuf. It is suggested to increase the size of the strbuf array to 24. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Andrey Shumilin Signed-off-by: Helge Deller Signed-off-by: Sasha Levin commit 7ad47b64c65eefc4a4ef4c1ccd87e71dd57e8a59 Author: Zijun Hu Date: Wed Jul 24 21:54:48 2024 +0800 driver core: bus: Return -EIO instead of 0 when show/store invalid bus attribute [ Upstream commit c0fd973c108cdc22a384854bc4b3e288a9717bb2 ] Return -EIO instead of 0 for below erroneous bus attribute operations: - read a bus attribute without show(). - write a bus attribute without store(). Signed-off-by: Zijun Hu Link: https://lore.kernel.org/r/20240724-bus_fix-v2-1-5adbafc698fb@quicinc.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 33529e270388c7b9c2bc63e4bdfd853ef832bc73 Author: Zhu Jun Date: Wed Aug 28 02:31:29 2024 -0700 tools/iio: Add memory allocation failure check for trigger_name [ Upstream commit 3c6b818b097dd6932859bcc3d6722a74ec5931c1 ] Added a check to handle memory allocation failure for `trigger_name` and return `-ENOMEM`. Signed-off-by: Zhu Jun Link: https://patch.msgid.link/20240828093129.3040-1-zhujun2@cmss.chinamobile.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin commit 59ac565c6277d4be6661e81ea6a7f3ca2c5e4e36 Author: Philip Chen Date: Mon Aug 26 21:53:13 2024 +0000 virtio_pmem: Check device status before requesting flush [ Upstream commit e25fbcd97cf52c3c9824d44b5c56c19673c3dd50 ] If a pmem device is in a bad status, the driver side could wait for host ack forever in virtio_pmem_flush(), causing the system to hang. So add a status check in the beginning of virtio_pmem_flush() to return early if the device is not activated. Signed-off-by: Philip Chen Message-Id: <20240826215313.2673566-1-philipchen@chromium.org> Signed-off-by: Michael S. Tsirkin Acked-by: Pankaj Gupta commit 0547f710d853bd2529969c6279c58f55f33b059a Author: Shawn Shao Date: Fri Aug 30 11:17:09 2024 +0800 usb: dwc2: Adjust the timing of USB Driver Interrupt Registration in the Crashkernel Scenario [ Upstream commit 4058c39bd176daf11a826802d940d86292a6b02b ] The issue is that before entering the crash kernel, the DWC USB controller did not perform operations such as resetting the interrupt mask bits. After entering the crash kernel,before the USB interrupt handler registration was completed while loading the DWC USB driver,an GINTSTS_SOF interrupt was received.This triggered the misroute_irq process within the GIC handling framework,ultimately leading to the misrouting of the interrupt,causing it to be handled by the wrong interrupt handler and resulting in the issue. Summary:In a scenario where the kernel triggers a panic and enters the crash kernel,it is necessary to ensure that the interrupt mask bit is not enabled before the interrupt registration is complete. If an interrupt reaches the CPU at this moment,it will certainly not be handled correctly,especially in cases where this interrupt is reported frequently. Please refer to the Crashkernel dmesg information as follows (the message on line 3 was added before devm_request_irq is called by the dwc2_driver_probe function): [ 5.866837][ T1] dwc2 JMIC0010:01: supply vusb_d not found, using dummy regulator [ 5.874588][ T1] dwc2 JMIC0010:01: supply vusb_a not found, using dummy regulator [ 5.882335][ T1] dwc2 JMIC0010:01: before devm_request_irq irq: [71], gintmsk[0xf300080e], gintsts[0x04200009] [ 5.892686][ C0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.0-jmnd1.2_RC #18 [ 5.900327][ C0] Hardware name: CMSS HyperCard4-25G/HyperCard4-25G, BIOS 1.6.4 Jul 8 2024 [ 5.908836][ C0] Call trace: [ 5.911965][ C0] dump_backtrace+0x0/0x1f0 [ 5.916308][ C0] show_stack+0x20/0x30 [ 5.920304][ C0] dump_stack+0xd8/0x140 [ 5.924387][ C0] pcie_xxx_handler+0x3c/0x1d8 [ 5.930121][ C0] __handle_irq_event_percpu+0x64/0x1e0 [ 5.935506][ C0] handle_irq_event+0x80/0x1d0 [ 5.940109][ C0] try_one_irq+0x138/0x174 [ 5.944365][ C0] misrouted_irq+0x134/0x140 [ 5.948795][ C0] note_interrupt+0x1d0/0x30c [ 5.953311][ C0] handle_irq_event+0x13c/0x1d0 [ 5.958001][ C0] handle_fasteoi_irq+0xd4/0x260 [ 5.962779][ C0] __handle_domain_irq+0x88/0xf0 [ 5.967555][ C0] gic_handle_irq+0x9c/0x2f0 [ 5.971985][ C0] el1_irq+0xb8/0x140 [ 5.975807][ C0] __setup_irq+0x3dc/0x7cc [ 5.980064][ C0] request_threaded_irq+0xf4/0x1b4 [ 5.985015][ C0] devm_request_threaded_irq+0x80/0x100 [ 5.990400][ C0] dwc2_driver_probe+0x1b8/0x6b0 [ 5.995178][ C0] platform_drv_probe+0x5c/0xb0 [ 5.999868][ C0] really_probe+0xf8/0x51c [ 6.004125][ C0] driver_probe_device+0xfc/0x170 [ 6.008989][ C0] device_driver_attach+0xc8/0xd0 [ 6.013853][ C0] __driver_attach+0xe8/0x1b0 [ 6.018369][ C0] bus_for_each_dev+0x7c/0xdc [ 6.022886][ C0] driver_attach+0x2c/0x3c [ 6.027143][ C0] bus_add_driver+0xdc/0x240 [ 6.031573][ C0] driver_register+0x80/0x13c [ 6.036090][ C0] __platform_driver_register+0x50/0x5c [ 6.041476][ C0] dwc2_platform_driver_init+0x24/0x30 [ 6.046774][ C0] do_one_initcall+0x50/0x25c [ 6.051291][ C0] do_initcall_level+0xe4/0xfc [ 6.055894][ C0] do_initcalls+0x80/0xa4 [ 6.060064][ C0] kernel_init_freeable+0x198/0x240 [ 6.065102][ C0] kernel_init+0x1c/0x12c Signed-off-by: Shawn Shao Link: https://lore.kernel.org/r/20240830031709.134-1-shawn.shao@jaguarmicro.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 2a806805d31f535643be6482ca40b4dba7b17c3d Author: Xu Yang Date: Fri Aug 23 15:38:32 2024 +0800 usb: chipidea: udc: enable suspend interrupt after usb reset [ Upstream commit e4fdcc10092fb244218013bfe8ff01c55d54e8e4 ] Currently, suspend interrupt is enabled before pullup enable operation. This will cause a suspend interrupt assert right after pullup DP. This suspend interrupt is meaningless, so this will ignore such interrupt by enable it after usb reset completed. Signed-off-by: Xu Yang Acked-by: Peter Chen Link: https://lore.kernel.org/r/20240823073832.1702135-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 6900b41263d5dc2518dfee738e6692d8d104bfc9 Author: Yunke Cao Date: Wed Aug 14 11:06:40 2024 +0900 media: videobuf2-core: clear memory related fields in __vb2_plane_dmabuf_put() [ Upstream commit 6a9c97ab6b7e85697e0b74e86062192a5ffffd99 ] Clear vb2_plane's memory related fields in __vb2_plane_dmabuf_put(), including bytesused, length, fd and data_offset. Remove the duplicated code in __prepare_dmabuf(). Signed-off-by: Yunke Cao Acked-by: Tomasz Figa Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin commit 5126d8f5567f49b52e21fca320eaa97977055099 Author: Kaixin Wang Date: Tue Sep 10 01:20:07 2024 +0800 ntb: ntb_hw_switchtec: Fix use after free vulnerability in switchtec_ntb_remove due to race condition [ Upstream commit e51aded92d42784313ba16c12f4f88cc4f973bbb ] In the switchtec_ntb_add function, it can call switchtec_ntb_init_sndev function, then &sndev->check_link_status_work is bound with check_link_status_work. switchtec_ntb_link_notification may be called to start the work. If we remove the module which will call switchtec_ntb_remove to make cleanup, it will free sndev through kfree(sndev), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | check_link_status_work switchtec_ntb_remove | kfree(sndev); | | if (sndev->link_force_down) | // use sndev Fix it by ensuring that the work is canceled before proceeding with the cleanup in switchtec_ntb_remove. Signed-off-by: Kaixin Wang Reviewed-by: Logan Gunthorpe Signed-off-by: Jon Mason Signed-off-by: Sasha Levin commit 018a3568801728f3678d177a0465af82117c59bb Author: Alex Williamson Date: Thu Sep 12 15:53:27 2024 -0600 PCI: Mark Creative Labs EMU20k2 INTx masking as broken [ Upstream commit 2910306655a7072640021563ec9501bfa67f0cb1 ] Per user reports, the Creative Labs EMU20k2 (Sound Blaster X-Fi Titanium Series) generates spurious interrupts when used with vfio-pci unless DisINTx masking support is disabled. Thus, quirk the device to mark INTx masking as broken. Closes: https://lore.kernel.org/all/VI1PR10MB8207C507DB5420AB4C7281E0DB9A2@VI1PR10MB8207.EURPRD10.PROD.OUTLOOK.COM Link: https://lore.kernel.org/linux-pci/20240912215331.839220-1-alex.williamson@redhat.com Reported-by: zdravko delineshev Signed-off-by: Alex Williamson [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński Signed-off-by: Sasha Levin commit a3a4d6a441f85028105497cee0ea250a43575aee Author: Hans de Goede Date: Mon Aug 12 22:39:48 2024 +0200 i2c: i801: Use a different adapter-name for IDF adapters [ Upstream commit 43457ada98c824f310adb7bd96bd5f2fcd9a3279 ] On chipsets with a second 'Integrated Device Function' SMBus controller use a different adapter-name for the second IDF adapter. This allows platform glue code which is looking for the primary i801 adapter to manually instantiate i2c_clients on to differentiate between the 2. This allows such code to find the primary i801 adapter by name, without needing to duplicate the PCI-ids to feature-flags mapping from i2c-i801.c. Reviewed-by: Pali Rohár Signed-off-by: Hans de Goede Acked-by: Wolfram Sang Signed-off-by: Andi Shyti Signed-off-by: Sasha Levin commit 7ca8f74f3901fdc817dab5a0fe84edde572ba487 Author: Subramanian Ananthanarayanan Date: Fri Sep 6 10:52:27 2024 +0530 PCI: Add ACS quirk for Qualcomm SA8775P [ Upstream commit 026f84d3fa62d215b11cbeb5a5d97df941e93b5c ] The Qualcomm SA8775P root ports don't advertise an ACS capability, but they do provide ACS-like features to disable peer transactions and validate bus numbers in requests. Thus, add an ACS quirk for the SA8775P. Link: https://lore.kernel.org/linux-pci/20240906052228.1829485-1-quic_skananth@quicinc.com Signed-off-by: Subramanian Ananthanarayanan Signed-off-by: Krzysztof Wilczyński Signed-off-by: Sasha Levin commit 96225fd15c6685313e8a2b29b9a9b5e9a8760e07 Author: Krzysztof Kozlowski Date: Mon Aug 26 08:58:01 2024 +0200 clk: bcm: bcm53573: fix OF node leak in init [ Upstream commit f92d67e23b8caa81f6322a2bad1d633b00ca000e ] Driver code is leaking OF node reference from of_get_parent() in bcm53573_ilp_init(). Usage of of_get_parent() is not needed in the first place, because the parent node will not be freed while we are processing given node (triggered by CLK_OF_DECLARE()). Thus fix the leak by accessing parent directly, instead of of_get_parent(). Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240826065801.17081-1-krzysztof.kozlowski@linaro.org Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin commit 978d712486f0e33c3093514e284fb7c735ef33ca Author: Daniel Jordan Date: Wed Sep 4 13:55:30 2024 -0400 ktest.pl: Avoid false positives with grub2 skip regex [ Upstream commit 2351e8c65404aabc433300b6bf90c7a37e8bbc4d ] Some distros have grub2 config files with the lines if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi which match the skip regex defined for grub2 in get_grub_index(): $skip = '^\s*menuentry'; These false positives cause the grub number to be higher than it should be, and the wrong kernel can end up booting. Grub documents the menuentry command with whitespace between it and the title, so make the skip regex reflect this. Link: https://lore.kernel.org/20240904175530.84175-1-daniel.m.jordan@oracle.com Signed-off-by: Daniel Jordan Acked-by: John 'Warthog9' Hawley (Tenstorrent) Signed-off-by: Steven Rostedt Signed-off-by: Sasha Levin commit 4a7b93911332b185e214e194bb421cb8f9077890 Author: Thomas Richter Date: Wed Jul 10 12:23:47 2024 +0200 s390/cpum_sf: Remove WARN_ON_ONCE statements [ Upstream commit b495e710157606889f2d8bdc62aebf2aa02f67a7 ] Remove WARN_ON_ONCE statements. These have not triggered in the past. Signed-off-by: Thomas Richter Acked-by: Sumanth Korikkar Cc: Heiko Carstens Cc: Vasily Gorbik Cc: Alexander Gordeev Signed-off-by: Vasily Gorbik Signed-off-by: Sasha Levin commit aa03f841cdc738c749080fd6c4f28c654d69d096 Author: Wojciech Gładysz Date: Thu Aug 1 16:38:27 2024 +0200 ext4: nested locking for xattr inode [ Upstream commit d1bc560e9a9c78d0b2314692847fc8661e0aeb99 ] Add nested locking with I_MUTEX_XATTR subclass to avoid lockdep warning while handling xattr inode on file open syscall at ext4_xattr_inode_iget. Backtrace EXT4-fs (loop0): Ignoring removed oldalloc option ====================================================== WARNING: possible circular locking dependency detected 5.10.0-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor543/2794 is trying to acquire lock: ffff8880215e1a48 (&ea_inode->i_rwsem#7/1){+.+.}-{3:3}, at: inode_lock include/linux/fs.h:782 [inline] ffff8880215e1a48 (&ea_inode->i_rwsem#7/1){+.+.}-{3:3}, at: ext4_xattr_inode_iget+0x42a/0x5c0 fs/ext4/xattr.c:425 but task is already holding lock: ffff8880215e3278 (&ei->i_data_sem/3){++++}-{3:3}, at: ext4_setattr+0x136d/0x19c0 fs/ext4/inode.c:5559 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&ei->i_data_sem/3){++++}-{3:3}: lock_acquire+0x197/0x480 kernel/locking/lockdep.c:5566 down_write+0x93/0x180 kernel/locking/rwsem.c:1564 ext4_update_i_disksize fs/ext4/ext4.h:3267 [inline] ext4_xattr_inode_write fs/ext4/xattr.c:1390 [inline] ext4_xattr_inode_lookup_create fs/ext4/xattr.c:1538 [inline] ext4_xattr_set_entry+0x331a/0x3d80 fs/ext4/xattr.c:1662 ext4_xattr_ibody_set+0x124/0x390 fs/ext4/xattr.c:2228 ext4_xattr_set_handle+0xc27/0x14e0 fs/ext4/xattr.c:2385 ext4_xattr_set+0x219/0x390 fs/ext4/xattr.c:2498 ext4_xattr_user_set+0xc9/0xf0 fs/ext4/xattr_user.c:40 __vfs_setxattr+0x404/0x450 fs/xattr.c:177 __vfs_setxattr_noperm+0x11d/0x4f0 fs/xattr.c:208 __vfs_setxattr_locked+0x1f9/0x210 fs/xattr.c:266 vfs_setxattr+0x112/0x2c0 fs/xattr.c:283 setxattr+0x1db/0x3e0 fs/xattr.c:548 path_setxattr+0x15a/0x240 fs/xattr.c:567 __do_sys_setxattr fs/xattr.c:582 [inline] __se_sys_setxattr fs/xattr.c:578 [inline] __x64_sys_setxattr+0xc5/0xe0 fs/xattr.c:578 do_syscall_64+0x6d/0xa0 arch/x86/entry/common.c:62 entry_SYSCALL_64_after_hwframe+0x61/0xcb -> #0 (&ea_inode->i_rwsem#7/1){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:2988 [inline] check_prevs_add kernel/locking/lockdep.c:3113 [inline] validate_chain+0x1695/0x58f0 kernel/locking/lockdep.c:3729 __lock_acquire+0x12fd/0x20d0 kernel/locking/lockdep.c:4955 lock_acquire+0x197/0x480 kernel/locking/lockdep.c:5566 down_write+0x93/0x180 kernel/locking/rwsem.c:1564 inode_lock include/linux/fs.h:782 [inline] ext4_xattr_inode_iget+0x42a/0x5c0 fs/ext4/xattr.c:425 ext4_xattr_inode_get+0x138/0x410 fs/ext4/xattr.c:485 ext4_xattr_move_to_block fs/ext4/xattr.c:2580 [inline] ext4_xattr_make_inode_space fs/ext4/xattr.c:2682 [inline] ext4_expand_extra_isize_ea+0xe70/0x1bb0 fs/ext4/xattr.c:2774 __ext4_expand_extra_isize+0x304/0x3f0 fs/ext4/inode.c:5898 ext4_try_to_expand_extra_isize fs/ext4/inode.c:5941 [inline] __ext4_mark_inode_dirty+0x591/0x810 fs/ext4/inode.c:6018 ext4_setattr+0x1400/0x19c0 fs/ext4/inode.c:5562 notify_change+0xbb6/0xe60 fs/attr.c:435 do_truncate+0x1de/0x2c0 fs/open.c:64 handle_truncate fs/namei.c:2970 [inline] do_open fs/namei.c:3311 [inline] path_openat+0x29f3/0x3290 fs/namei.c:3425 do_filp_open+0x20b/0x450 fs/namei.c:3452 do_sys_openat2+0x124/0x460 fs/open.c:1207 do_sys_open fs/open.c:1223 [inline] __do_sys_open fs/open.c:1231 [inline] __se_sys_open fs/open.c:1227 [inline] __x64_sys_open+0x221/0x270 fs/open.c:1227 do_syscall_64+0x6d/0xa0 arch/x86/entry/common.c:62 entry_SYSCALL_64_after_hwframe+0x61/0xcb other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->i_data_sem/3); lock(&ea_inode->i_rwsem#7/1); lock(&ei->i_data_sem/3); lock(&ea_inode->i_rwsem#7/1); *** DEADLOCK *** 5 locks held by syz-executor543/2794: #0: ffff888026fbc448 (sb_writers#4){.+.+}-{0:0}, at: mnt_want_write+0x4a/0x2a0 fs/namespace.c:365 #1: ffff8880215e3488 (&sb->s_type->i_mutex_key#7){++++}-{3:3}, at: inode_lock include/linux/fs.h:782 [inline] #1: ffff8880215e3488 (&sb->s_type->i_mutex_key#7){++++}-{3:3}, at: do_truncate+0x1cf/0x2c0 fs/open.c:62 #2: ffff8880215e3310 (&ei->i_mmap_sem){++++}-{3:3}, at: ext4_setattr+0xec4/0x19c0 fs/ext4/inode.c:5519 #3: ffff8880215e3278 (&ei->i_data_sem/3){++++}-{3:3}, at: ext4_setattr+0x136d/0x19c0 fs/ext4/inode.c:5559 #4: ffff8880215e30c8 (&ei->xattr_sem){++++}-{3:3}, at: ext4_write_trylock_xattr fs/ext4/xattr.h:162 [inline] #4: ffff8880215e30c8 (&ei->xattr_sem){++++}-{3:3}, at: ext4_try_to_expand_extra_isize fs/ext4/inode.c:5938 [inline] #4: ffff8880215e30c8 (&ei->xattr_sem){++++}-{3:3}, at: __ext4_mark_inode_dirty+0x4fb/0x810 fs/ext4/inode.c:6018 stack backtrace: CPU: 1 PID: 2794 Comm: syz-executor543 Not tainted 5.10.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x177/0x211 lib/dump_stack.c:118 print_circular_bug+0x146/0x1b0 kernel/locking/lockdep.c:2002 check_noncircular+0x2cc/0x390 kernel/locking/lockdep.c:2123 check_prev_add kernel/locking/lockdep.c:2988 [inline] check_prevs_add kernel/locking/lockdep.c:3113 [inline] validate_chain+0x1695/0x58f0 kernel/locking/lockdep.c:3729 __lock_acquire+0x12fd/0x20d0 kernel/locking/lockdep.c:4955 lock_acquire+0x197/0x480 kernel/locking/lockdep.c:5566 down_write+0x93/0x180 kernel/locking/rwsem.c:1564 inode_lock include/linux/fs.h:782 [inline] ext4_xattr_inode_iget+0x42a/0x5c0 fs/ext4/xattr.c:425 ext4_xattr_inode_get+0x138/0x410 fs/ext4/xattr.c:485 ext4_xattr_move_to_block fs/ext4/xattr.c:2580 [inline] ext4_xattr_make_inode_space fs/ext4/xattr.c:2682 [inline] ext4_expand_extra_isize_ea+0xe70/0x1bb0 fs/ext4/xattr.c:2774 __ext4_expand_extra_isize+0x304/0x3f0 fs/ext4/inode.c:5898 ext4_try_to_expand_extra_isize fs/ext4/inode.c:5941 [inline] __ext4_mark_inode_dirty+0x591/0x810 fs/ext4/inode.c:6018 ext4_setattr+0x1400/0x19c0 fs/ext4/inode.c:5562 notify_change+0xbb6/0xe60 fs/attr.c:435 do_truncate+0x1de/0x2c0 fs/open.c:64 handle_truncate fs/namei.c:2970 [inline] do_open fs/namei.c:3311 [inline] path_openat+0x29f3/0x3290 fs/namei.c:3425 do_filp_open+0x20b/0x450 fs/namei.c:3452 do_sys_openat2+0x124/0x460 fs/open.c:1207 do_sys_open fs/open.c:1223 [inline] __do_sys_open fs/open.c:1231 [inline] __se_sys_open fs/open.c:1227 [inline] __x64_sys_open+0x221/0x270 fs/open.c:1227 do_syscall_64+0x6d/0xa0 arch/x86/entry/common.c:62 entry_SYSCALL_64_after_hwframe+0x61/0xcb RIP: 0033:0x7f0cde4ea229 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 21 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd81d1c978 EFLAGS: 00000246 ORIG_RAX: 0000000000000002 RAX: ffffffffffffffda RBX: 0030656c69662f30 RCX: 00007f0cde4ea229 RDX: 0000000000000089 RSI: 00000000000a0a00 RDI: 00000000200001c0 RBP: 2f30656c69662f2e R08: 0000000000208000 R09: 0000000000208000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd81d1c9c0 R13: 00007ffd81d1ca00 R14: 0000000000080000 R15: 0000000000000003 EXT4-fs error (device loop0): ext4_expand_extra_isize_ea:2730: inode #13: comm syz-executor543: corrupted in-inode xattr Signed-off-by: Wojciech Gładysz Link: https://patch.msgid.link/20240801143827.19135-1-wojciech.gladysz@infogain.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit e040f33b306757b2d49692a681fe46e9ee88f4b1 Author: Gerald Schaefer Date: Mon Sep 2 14:02:19 2024 +0200 s390/mm: Add cond_resched() to cmm_alloc/free_pages() [ Upstream commit 131b8db78558120f58c5dc745ea9655f6b854162 ] Adding/removing large amount of pages at once to/from the CMM balloon can result in rcu_sched stalls or workqueue lockups, because of busy looping w/o cond_resched(). Prevent this by adding a cond_resched(). cmm_free_pages() holds a spin_lock while looping, so it cannot be added directly to the existing loop. Instead, introduce a wrapper function that operates on maximum 256 pages at once, and add it there. Signed-off-by: Gerald Schaefer Reviewed-by: Heiko Carstens Signed-off-by: Heiko Carstens Signed-off-by: Sasha Levin commit 06711219420e0f6a1ef42d1aabe7e680fc801d9c Author: Heiko Carstens Date: Wed Sep 4 11:39:24 2024 +0200 s390/facility: Disable compile time optimization for decompressor code [ Upstream commit 0147addc4fb72a39448b8873d8acdf3a0f29aa65 ] Disable compile time optimizations of test_facility() for the decompressor. The decompressor should not contain any optimized code depending on the architecture level set the kernel image is compiled for to avoid unexpected operation exceptions. Add a __DECOMPRESSOR check to test_facility() to enforce that facilities are always checked during runtime for the decompressor. Reviewed-by: Sven Schnelle Signed-off-by: Heiko Carstens Signed-off-by: Sasha Levin commit d2e35f220c8c51d4fe39f1c7128913642f8dc89b Author: Tao Chen Date: Tue Sep 10 22:41:10 2024 +0800 bpf: Check percpu map value size first [ Upstream commit 1d244784be6b01162b732a5a7d637dfc024c3203 ] Percpu map is often used, but the map value size limit often ignored, like issue: https://github.com/iovisor/bcc/issues/2519. Actually, percpu map value size is bound by PCPU_MIN_UNIT_SIZE, so we can check the value size whether it exceeds PCPU_MIN_UNIT_SIZE first, like percpu map of local_storage. Maybe the error message seems clearer compared with "cannot allocate memory". Signed-off-by: Jinke Han Signed-off-by: Tao Chen Signed-off-by: Andrii Nakryiko Acked-by: Jiri Olsa Acked-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20240910144111.1464912-2-chen.dylane@gmail.com Signed-off-by: Sasha Levin commit a9beea8c85090a6f419abe67f4ac739d2f3a3613 Author: Mathias Krause Date: Wed Oct 9 05:42:12 2024 +0000 Input: synaptics-rmi4 - fix UAF of IRQ domain on driver removal commit fbf8d71742557abaf558d8efb96742d442720cc2 upstream. Calling irq_domain_remove() will lead to freeing the IRQ domain prematurely. The domain is still referenced and will be attempted to get used via rmi_free_function_list() -> rmi_unregister_function() -> irq_dispose_mapping() -> irq_get_irq_data()'s ->domain pointer. With PaX's MEMORY_SANITIZE this will lead to an access fault when attempting to dereference embedded pointers, as in Torsten's report that was faulting on the 'domain->ops->unmap' test. Fix this by releasing the IRQ domain only after all related IRQs have been deactivated. Fixes: 24d28e4f1271 ("Input: synaptics-rmi4 - convert irq distribution to irq_domain") Reported-by: Torsten Hilbrich Signed-off-by: Mathias Krause Link: https://lore.kernel.org/r/20240222142654.856566-1-minipli@grsecurity.net Signed-off-by: Dmitry Torokhov Signed-off-by: Tzung-Bi Shih Signed-off-by: Sasha Levin commit 3088336ff72b50dddb9ecfbd64972ec34a34fbfc Author: Michael S. Tsirkin Date: Mon Sep 16 14:16:44 2024 -0400 virtio_console: fix misc probe bugs [ Upstream commit b9efbe2b8f0177fa97bfab290d60858900aa196b ] This fixes the following issue discovered by code review: after vqs have been created, a buggy device can send an interrupt. A control vq callback will then try to schedule control_work which has not been initialized yet. Similarly for config interrupt. Further, in and out vq callbacks invoke find_port_by_vq which attempts to take ports_lock which also has not been initialized. To fix, init all locks and work before creating vqs. Message-ID: Fixes: 17634ba25544 ("virtio: console: Add a new MULTIPORT feature, support for generic ports") Signed-off-by: Michael S. Tsirkin Signed-off-by: Sasha Levin commit 578d66b0486a199a5142721b3416c3a59fa07451 Author: Steven Rostedt (Google) Date: Tue Feb 20 09:06:14 2024 -0500 tracing: Have saved_cmdlines arrays all in one allocation [ Upstream commit 0b18c852cc6fb8284ac0ab97e3e840974a6a8a64 ] The saved_cmdlines have three arrays for mapping PIDs to COMMs: - map_pid_to_cmdline[] - map_cmdline_to_pid[] - saved_cmdlines The map_pid_to_cmdline[] is PID_MAX_DEFAULT in size and holds the index into the other arrays. The map_cmdline_to_pid[] is a mapping back to the full pid as it can be larger than PID_MAX_DEFAULT. And the saved_cmdlines[] just holds the COMMs associated to the pids. Currently the map_pid_to_cmdline[] and saved_cmdlines[] are allocated together (in reality the saved_cmdlines is just in the memory of the rounding of the allocation of the structure as it is always allocated in powers of two). The map_cmdline_to_pid[] array is allocated separately. Since the rounding to a power of two is rather large (it allows for 8000 elements in saved_cmdlines), also include the map_cmdline_to_pid[] array. (This drops it to 6000 by default, which is still plenty for most use cases). This saves even more memory as the map_cmdline_to_pid[] array doesn't need to be allocated. Link: https://lore.kernel.org/linux-trace-kernel/20240212174011.068211d9@gandalf.local.home/ Link: https://lore.kernel.org/linux-trace-kernel/20240220140703.182330529@goodmis.org Cc: Mark Rutland Cc: Mathieu Desnoyers Cc: Andrew Morton Cc: Tim Chen Cc: Vincent Donnefort Cc: Sven Schnelle Cc: Mete Durlu Fixes: 44dc5c41b5b1 ("tracing: Fix wasted memory in saved_cmdlines logic") Acked-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin commit 07effb3c96c4b8b4757f7172eae540e62e0e46bd Author: Rob Clark Date: Mon Feb 12 13:55:34 2024 -0800 drm/crtc: fix uninitialized variable use even harder [ Upstream commit b6802b61a9d0e99dcfa6fff7c50db7c48a9623d3 ] DRM_MODESET_LOCK_ALL_BEGIN() has a hidden trap-door (aka retry loop), which means we can't rely too much on variable initializers. Fixes: 6e455f5dcdd1 ("drm/crtc: fix uninitialized variable use") Signed-off-by: Rob Clark Reviewed-by: Daniel Vetter Reviewed-by: Abhinav Kumar Reviewed-by: Dmitry Baryshkov Tested-by: Dmitry Baryshkov # sc7180, sdm845 Link: https://patchwork.freedesktop.org/patch/msgid/20240212215534.190682-1-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin commit 49da44d24c96f0a3c3ff423c6f761deadfd1c0e2 Author: Steven Rostedt (Google) Date: Mon Mar 4 17:43:41 2024 -0500 tracing: Remove precision vsnprintf() check from print event [ Upstream commit 5efd3e2aef91d2d812290dcb25b2058e6f3f532c ] This reverts 60be76eeabb3d ("tracing: Add size check when printing trace_marker output"). The only reason the precision check was added was because of a bug that miscalculated the write size of the string into the ring buffer and it truncated it removing the terminating nul byte. On reading the trace it crashed the kernel. But this was due to the bug in the code that happened during development and should never happen in practice. If anything, the precision can hide bugs where the string in the ring buffer isn't nul terminated and it will not be checked. Link: https://lore.kernel.org/all/C7E7AF1A-D30F-4D18-B8E5-AF1EF58004F5@linux.ibm.com/ Link: https://lore.kernel.org/linux-trace-kernel/20240227125706.04279ac2@gandalf.local.home Link: https://lore.kernel.org/all/20240302111244.3a1674be@gandalf.local.home/ Link: https://lore.kernel.org/linux-trace-kernel/20240304174341.2a561d9f@gandalf.local.home Cc: Masami Hiramatsu Cc: Linus Torvalds Fixes: 60be76eeabb3d ("tracing: Add size check when printing trace_marker output") Reported-by: Sachin Sant Tested-by: Sachin Sant Reviewed-by: Mathieu Desnoyers Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin commit 7eb94e52eb4fee67debb6bc7f572c2d889090350 Author: Linus Walleij Date: Sat Jan 6 01:12:22 2024 +0100 net: ethernet: cortina: Drop TSO support [ Upstream commit ac631873c9e7a50d2a8de457cfc4b9f86666403e ] The recent change to allow large frames without hardware checksumming slotted in software checksumming in the driver if hardware could not do it. This will however upset TSO (TCP Segment Offloading). Typical error dumps includes this: skb len=2961 headroom=222 headlen=66 tailroom=0 (...) WARNING: CPU: 0 PID: 956 at net/core/dev.c:3259 skb_warn_bad_offload+0x7c/0x108 gemini-ethernet-port: caps=(0x0000010000154813, 0x00002007ffdd7889) And the packets do not go through. The TSO implementation is bogus: a TSO enabled driver must propagate the skb_shinfo(skb)->gso_size value to the TSO engine on the NIC. Drop the size check and TSO offloading features for now: this needs to be fixed up properly. After this ethernet works fine on Gemini devices with a direct connected PHY such as D-Link DNS-313. Also tested to still be working with a DSA switch using the Gemini ethernet as conduit interface. Link: https://lore.kernel.org/netdev/CANn89iJLfxng1sYL5Zk0mknXpyYQPCp83m3KgD2KJ2_hKCpEUg@mail.gmail.com/ Suggested-by: Eric Dumazet Fixes: d4d0c5b4d279 ("net: ethernet: cortina: Handle large frames") Signed-off-by: Linus Walleij Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 18b5f47e7da46d3a0d7331e48befcaf151ed2ddf Author: Gabriel Krisman Bertazi Date: Tue Oct 8 18:43:16 2024 -0400 unicode: Don't special case ignorable code points commit 5c26d2f1d3f5e4be3e196526bead29ecb139cf91 upstream. We don't need to handle them separately. Instead, just let them decompose/casefold to themselves. Signed-off-by: Gabriel Krisman Bertazi Signed-off-by: Greg Kroah-Hartman commit 6de83ed47371fb7e6b63d0b0cc66f11ef7a4ea0a Author: zhanchengbin Date: Tue Jan 3 10:28:12 2023 +0800 ext4: fix inode tree inconsistency caused by ENOMEM commit 3f5424790d4377839093b68c12b130077a4e4510 upstream. If ENOMEM fails when the extent is splitting, we need to restore the length of the split extent. In the ext4_split_extent_at function, only in ext4_ext_create_new_leaf will it alloc memory and change the shape of the extent tree,even if an ENOMEM is returned at this time, the extent tree is still self-consistent, Just restore the split extent lens in the function ext4_split_extent_at. ext4_split_extent_at ext4_ext_insert_extent ext4_ext_create_new_leaf 1)ext4_ext_split ext4_find_extent 2)ext4_ext_grow_indepth ext4_find_extent Signed-off-by: zhanchengbin Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20230103022812.130603-1-zhanchengbin1@huawei.com Signed-off-by: Theodore Ts'o Cc: Baokun Li Signed-off-by: Greg Kroah-Hartman commit c47843a831e0eae007ad7e848d208e675ba4c132 Author: Armin Wolf Date: Tue Oct 1 23:28:34 2024 +0200 ACPI: battery: Fix possible crash when unregistering a battery hook [ Upstream commit 76959aff14a0012ad6b984ec7686d163deccdc16 ] When a battery hook returns an error when adding a new battery, then the battery hook is automatically unregistered. However the battery hook provider cannot know that, so it will later call battery_hook_unregister() on the already unregistered battery hook, resulting in a crash. Fix this by using the list head to mark already unregistered battery hooks as already being unregistered so that they can be ignored by battery_hook_unregister(). Fixes: fa93854f7a7e ("battery: Add the battery hooking API") Signed-off-by: Armin Wolf Link: https://patch.msgid.link/20241001212835.341788-3-W_Armin@gmx.de Cc: All applicable Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit b5b7d4a012844586d0da3a6dafcbb339907d5f65 Author: Armin Wolf Date: Tue Oct 1 23:28:33 2024 +0200 ACPI: battery: Simplify battery hook locking [ Upstream commit 86309cbed26139e1caae7629dcca1027d9a28e75 ] Move the conditional locking from __battery_hook_unregister() into battery_hook_unregister() and rename the low-level function to simplify the locking during battery hook removal. Reviewed-by: Ilpo Järvinen Reviewed-by: Pali Rohár Signed-off-by: Armin Wolf Link: https://patch.msgid.link/20241001212835.341788-2-W_Armin@gmx.de Signed-off-by: Rafael J. Wysocki Stable-dep-of: 76959aff14a0 ("ACPI: battery: Fix possible crash when unregistering a battery hook") Signed-off-by: Sasha Levin commit 64648ae8c97ec5a3165021627f5a1658ebe081ca Author: Heiner Kallweit Date: Tue Sep 17 23:04:46 2024 +0200 r8169: add tally counter fields added with RTL8125 [ Upstream commit ced8e8b8f40accfcce4a2bbd8b150aa76d5eff9a ] RTL8125 added fields to the tally counter, what may result in the chip dma'ing these new fields to unallocated memory. Therefore make sure that the allocated memory area is big enough to hold all of the tally counter values, even if we use only parts of it. Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit Reviewed-by: Simon Horman Link: https://patch.msgid.link/741d26a9-2b2b-485d-91d9-ecb302e345b5@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit c2d43f222110edd0016a04b65ec96441bd563740 Author: Colin Ian King Date: Mon Sep 9 15:00:21 2024 +0100 r8169: Fix spelling mistake: "tx_underun" -> "tx_underrun" [ Upstream commit 8df9439389a44fb2cc4ef695e08d6a8870b1616c ] There is a spelling mistake in the struct field tx_underun, rename it to tx_underrun. Signed-off-by: Colin Ian King Reviewed-by: Simon Horman Reviewed-by: Heiner Kallweit Link: https://patch.msgid.link/20240909140021.64884-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski Stable-dep-of: ced8e8b8f40a ("r8169: add tally counter fields added with RTL8125") Signed-off-by: Sasha Levin commit 9dcff844c1cb7258bd9a6039d754566b9592d740 Author: Mike Tipton Date: Fri Aug 9 10:51:29 2024 +0530 clk: qcom: clk-rpmh: Fix overflow in BCM vote [ Upstream commit a4e5af27e6f6a8b0d14bc0d7eb04f4a6c7291586 ] Valid frequencies may result in BCM votes that exceed the max HW value. Set vote ceiling to BCM_TCS_CMD_VOTE_MASK to ensure the votes aren't truncated, which can result in lower frequencies than desired. Fixes: 04053f4d23a4 ("clk: qcom: clk-rpmh: Add IPA clock support") Cc: stable@vger.kernel.org Signed-off-by: Mike Tipton Reviewed-by: Taniya Das Signed-off-by: Imran Shaik Link: https://lore.kernel.org/r/20240809-clk-rpmh-bcm-vote-fix-v2-1-240c584b7ef9@quicinc.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin commit 997526f85bc95a9ebf21aabf8df6dcb610db97d1 Author: Stephen Boyd Date: Mon Mar 9 15:12:31 2020 -0700 clk: qcom: rpmh: Simplify clk_rpmh_bcm_send_cmd() [ Upstream commit 2cf7a4cbcb4e108aae666dc6a81cedf69e1cba37 ] This function has some duplication in unlocking a mutex and returns in a few different places. Let's use some if statements to consolidate code and make this a bit easier to read. Cc: Bjorn Andersson CC: Taniya Das Signed-off-by: Stephen Boyd Link: https://lkml.kernel.org/r/20200309221232.145630-2-sboyd@kernel.org Stable-dep-of: a4e5af27e6f6 ("clk: qcom: clk-rpmh: Fix overflow in BCM vote") Signed-off-by: Sasha Levin commit 86c3f6130b49037f956d13f03318f400fb87fd41 Author: NeilBrown Date: Mon Sep 9 15:06:36 2024 +1000 nfsd: fix delegation_blocked() to block correctly for at least 30 seconds [ Upstream commit 45bb63ed20e02ae146336412889fe5450316a84f ] The pair of bloom filtered used by delegation_blocked() was intended to block delegations on given filehandles for between 30 and 60 seconds. A new filehandle would be recorded in the "new" bit set. That would then be switch to the "old" bit set between 0 and 30 seconds later, and it would remain as the "old" bit set for 30 seconds. Unfortunately the code intended to clear the old bit set once it reached 30 seconds old, preparing it to be the next new bit set, instead cleared the *new* bit set before switching it to be the old bit set. This means that the "old" bit set is always empty and delegations are blocked between 0 and 30 seconds. This patch updates bd->new before clearing the set with that index, instead of afterwards. Reported-by: Olga Kornievskaia Cc: stable@vger.kernel.org Fixes: 6282cd565553 ("NFSD: Don't hand out delegations for 30 seconds after recalling them.") Signed-off-by: NeilBrown Reviewed-by: Benjamin Coddington Reviewed-by: Jeff Layton Signed-off-by: Chuck Lever Signed-off-by: Sasha Levin commit 8843824b67db0bc61c9aee30e88fa8558317d0c1 Author: Arnd Bergmann Date: Fri Oct 20 11:25:34 2017 +0200 nfsd: use ktime_get_seconds() for timestamps [ Upstream commit b3f255ef6bffc18a28c3b6295357f2a3380c033f ] The delegation logic in nfsd uses the somewhat inefficient seconds_since_boot() function to record time intervals. Signed-off-by: Arnd Bergmann Signed-off-by: J. Bruce Fields Stable-dep-of: 45bb63ed20e0 ("nfsd: fix delegation_blocked() to block correctly for at least 30 seconds") Signed-off-by: Sasha Levin commit fe5e9182d3e227476642ae2b312e2356c4d326a3 Author: Oleg Nesterov Date: Mon Oct 7 19:46:01 2024 +0200 uprobes: fix kernel info leak via "[uprobes]" vma commit 34820304cc2cd1804ee1f8f3504ec77813d29c8e upstream. xol_add_vma() maps the uninitialized page allocated by __create_xol_area() into userspace. On some architectures (x86) this memory is readable even without VM_READ, VM_EXEC results in the same pgprot_t as VM_EXEC|VM_READ, although this doesn't really matter, debugger can read this memory anyway. Link: https://lore.kernel.org/all/20240929162047.GA12611@redhat.com/ Reported-by: Will Deacon Fixes: d4b3b6384f98 ("uprobes/core: Allocate XOL slots for uprobes use") Cc: stable@vger.kernel.org Acked-by: Masami Hiramatsu (Google) Signed-off-by: Oleg Nesterov Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Sasha Levin commit 7fc8b76903dc3cb1d1bb612ecfbce1cac4c09c5a Author: Mark Rutland Date: Mon Oct 7 13:18:50 2024 +0100 arm64: errata: Expand speculative SSBS workaround once more [ Upstream commit 081eb7932c2b244f63317a982c5e3990e2c7fbdd ] A number of Arm Ltd CPUs suffer from errata whereby an MSR to the SSBS special-purpose register does not affect subsequent speculative instructions, permitting speculative store bypassing for a window of time. We worked around this for a number of CPUs in commits: * 7187bb7d0b5c7dfa ("arm64: errata: Add workaround for Arm errata 3194386 and 3312417") * 75b3c43eab594bfb ("arm64: errata: Expand speculative SSBS workaround") * 145502cac7ea70b5 ("arm64: errata: Expand speculative SSBS workaround (again)") Since then, a (hopefully final) batch of updates have been published, with two more affected CPUs. For the affected CPUs the existing mitigation is sufficient, as described in their respective Software Developer Errata Notice (SDEN) documents: * Cortex-A715 (MP148) SDEN v15.0, erratum 3456084 https://developer.arm.com/documentation/SDEN-2148827/1500/ * Neoverse-N3 (MP195) SDEN v5.0, erratum 3456111 https://developer.arm.com/documentation/SDEN-3050973/0500/ Enable the existing mitigation by adding the relevant MIDRs to erratum_spec_ssbs_list, and update silicon-errata.rst and the Kconfig text accordingly. Signed-off-by: Mark Rutland Cc: James Morse Cc: Will Deacon Link: https://lore.kernel.org/r/20240930111705.3352047-3-mark.rutland@arm.com Signed-off-by: Catalin Marinas [ Mark: fix conflict in silicon-errata.rst, handle move ] Signed-off-by: Mark Rutland Signed-off-by: Sasha Levin commit 3b35b4461f399fb612dd5f9cde1fda22e3e29543 Author: Mark Rutland Date: Mon Oct 7 13:18:49 2024 +0100 arm64: cputype: Add Neoverse-N3 definitions [ Upstream commit 924725707d80bc2588cefafef76ff3f164d299bc ] Add cputype definitions for Neoverse-N3. These will be used for errata detection in subsequent patches. These values can be found in Table A-261 ("MIDR_EL1 bit descriptions") in issue 02 of the Neoverse-N3 TRM, which can be found at: https://developer.arm.com/documentation/107997/0000/?lang=en Signed-off-by: Mark Rutland Cc: James Morse Cc: Will Deacon Link: https://lore.kernel.org/r/20240930111705.3352047-2-mark.rutland@arm.com Signed-off-by: Catalin Marinas [ Mark: trivial backport ] Signed-off-by: Mark Rutland Signed-off-by: Sasha Levin commit d493f26ef87fe65b4f0c64fcbdfd62221ffe4c07 Author: Anshuman Khandual Date: Mon Oct 7 13:18:48 2024 +0100 arm64: Add Cortex-715 CPU part definition [ Upstream commit 07e39e60bbf0ccd5f895568e1afca032193705c0 ] Add the CPU Partnumbers for the new Arm designs. Cc: Catalin Marinas Cc: Will Deacon Cc: Suzuki K Poulose Cc: James Morse Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Acked-by: Catalin Marinas Signed-off-by: Anshuman Khandual Link: https://lore.kernel.org/r/20221116140915.356601-2-anshuman.khandual@arm.com Signed-off-by: Will Deacon [ Mark: Trivial backport ] Signed-off-by: Mark Rutland Signed-off-by: Sasha Levin commit 889b912954a048a8e9777d7c4f6828cfc9a8f9d4 Author: Jinjie Ruan Date: Thu Sep 12 11:34:59 2024 +0800 i2c: qcom-geni: Use IRQF_NO_AUTOEN flag in request_irq() [ Upstream commit e2c85d85a05f16af2223fcc0195ff50a7938b372 ] disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ. Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller") Signed-off-by: Jinjie Ruan Cc: # v4.19+ Acked-by: Mukesh Kumar Savaliya Reviewed-by: Vladimir Zapolskiy Signed-off-by: Andi Shyti Signed-off-by: Sasha Levin commit 66b9e6e2d430c4f27b4cd1f2800d60f42bb655b9 Author: Stephen Boyd Date: Tue Mar 10 08:43:57 2020 -0700 i2c: qcom-geni: Grow a dev pointer to simplify code [ Upstream commit 3b7d81f08a6a2bdd406df4355b08d39def8104aa ] Some lines are long here. Use a struct dev pointer to shorten lines and simplify code. The clk_get() call can fail because of EPROBE_DEFER problems too, so just remove the error print message because it isn't useful. Finally, platform_get_irq() already prints an error so just remove that error message. Reviewed-by: Douglas Anderson Reviewed-by: Brendan Higgins Signed-off-by: Stephen Boyd Reviewed-by: Bjorn Andersson Reviewed-by: Amit Kucheria Signed-off-by: Wolfram Sang Stable-dep-of: e2c85d85a05f ("i2c: qcom-geni: Use IRQF_NO_AUTOEN flag in request_irq()") Signed-off-by: Sasha Levin commit d5bcb2f9aea06dc349607d76df94d41388ba6da8 Author: Stephen Boyd Date: Tue Mar 10 08:43:56 2020 -0700 i2c: qcom-geni: Let firmware specify irq trigger flags [ Upstream commit b2ca8800621b95ecced081376de9fe256b1fa479 ] We don't need to force IRQF_TRIGGER_HIGH here as the DT or ACPI tables should take care of this for us. Just use 0 instead so that we use the flags from the firmware. Also, remove specify dev_name() for the irq name so that we can get better information in /proc/interrupts about which device is generating interrupts. Cc: Alok Chauhan Reviewed-by: Douglas Anderson Reviewed-by: Brendan Higgins Signed-off-by: Stephen Boyd Reviewed-by: Bjorn Andersson Reviewed-by: Amit Kucheria Signed-off-by: Wolfram Sang Stable-dep-of: e2c85d85a05f ("i2c: qcom-geni: Use IRQF_NO_AUTOEN flag in request_irq()") Signed-off-by: Sasha Levin commit dd6a664bd8b372c8fe0e303aaadcbc35162811c3 Author: Emanuele Ghidoli Date: Wed Aug 28 15:32:07 2024 +0200 gpio: davinci: fix lazy disable commit 3360d41f4ac490282fddc3ccc0b58679aa5c065d upstream. On a few platforms such as TI's AM69 device, disable_irq() fails to keep track of the interrupts that happen between disable_irq() and enable_irq() and those interrupts are missed. Use the ->irq_unmask() and ->irq_mask() methods instead of ->irq_enable() and ->irq_disable() to correctly keep track of edges when disable_irq is called. This solves the issue of disable_irq() not working as expected on such platforms. Fixes: 23265442b02b ("ARM: davinci: irq_data conversion.") Signed-off-by: Emanuele Ghidoli Signed-off-by: Parth Pancholi Acked-by: Keerthy Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240828133207.493961-1-parth105105@gmail.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Greg Kroah-Hartman commit a71349b692ab34ea197949e13e3cc42570fe73d9 Author: Filipe Manana Date: Tue Oct 1 11:06:52 2024 +0100 btrfs: wait for fixup workers before stopping cleaner kthread during umount commit 41fd1e94066a815a7ab0a7025359e9b40e4b3576 upstream. During unmount, at close_ctree(), we have the following steps in this order: 1) Park the cleaner kthread - this doesn't destroy the kthread, it basically halts its execution (wake ups against it work but do nothing); 2) We stop the cleaner kthread - this results in freeing the respective struct task_struct; 3) We call btrfs_stop_all_workers() which waits for any jobs running in all the work queues and then free the work queues. Syzbot reported a case where a fixup worker resulted in a crash when doing a delayed iput on its inode while attempting to wake up the cleaner at btrfs_add_delayed_iput(), because the task_struct of the cleaner kthread was already freed. This can happen during unmount because we don't wait for any fixup workers still running before we call kthread_stop() against the cleaner kthread, which stops and free all its resources. Fix this by waiting for any fixup workers at close_ctree() before we call kthread_stop() against the cleaner and run pending delayed iputs. The stack traces reported by syzbot were the following: BUG: KASAN: slab-use-after-free in __lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065 Read of size 8 at addr ffff8880272a8a18 by task kworker/u8:3/52 CPU: 1 UID: 0 PID: 52 Comm: kworker/u8:3 Not tainted 6.12.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: btrfs-fixup btrfs_work_helper Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 __lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162 class_raw_spinlock_irqsave_constructor include/linux/spinlock.h:551 [inline] try_to_wake_up+0xb0/0x1480 kernel/sched/core.c:4154 btrfs_writepage_fixup_worker+0xc16/0xdf0 fs/btrfs/inode.c:2842 btrfs_work_helper+0x390/0xc50 fs/btrfs/async-thread.c:314 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Allocated by task 2: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:319 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:345 kasan_slab_alloc include/linux/kasan.h:247 [inline] slab_post_alloc_hook mm/slub.c:4086 [inline] slab_alloc_node mm/slub.c:4135 [inline] kmem_cache_alloc_node_noprof+0x16b/0x320 mm/slub.c:4187 alloc_task_struct_node kernel/fork.c:180 [inline] dup_task_struct+0x57/0x8c0 kernel/fork.c:1107 copy_process+0x5d1/0x3d50 kernel/fork.c:2206 kernel_clone+0x223/0x880 kernel/fork.c:2787 kernel_thread+0x1bc/0x240 kernel/fork.c:2849 create_kthread kernel/kthread.c:412 [inline] kthreadd+0x60d/0x810 kernel/kthread.c:765 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Freed by task 61: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:230 [inline] slab_free_hook mm/slub.c:2343 [inline] slab_free mm/slub.c:4580 [inline] kmem_cache_free+0x1a2/0x420 mm/slub.c:4682 put_task_struct include/linux/sched/task.h:144 [inline] delayed_put_task_struct+0x125/0x300 kernel/exit.c:228 rcu_do_batch kernel/rcu/tree.c:2567 [inline] rcu_core+0xaaa/0x17a0 kernel/rcu/tree.c:2823 handle_softirqs+0x2c5/0x980 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637 irq_exit_rcu+0x9/0x30 kernel/softirq.c:649 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1037 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1037 asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 Last potentially related work creation: kasan_save_stack+0x3f/0x60 mm/kasan/common.c:47 __kasan_record_aux_stack+0xac/0xc0 mm/kasan/generic.c:541 __call_rcu_common kernel/rcu/tree.c:3086 [inline] call_rcu+0x167/0xa70 kernel/rcu/tree.c:3190 context_switch kernel/sched/core.c:5318 [inline] __schedule+0x184b/0x4ae0 kernel/sched/core.c:6675 schedule_idle+0x56/0x90 kernel/sched/core.c:6793 do_idle+0x56a/0x5d0 kernel/sched/idle.c:354 cpu_startup_entry+0x42/0x60 kernel/sched/idle.c:424 start_secondary+0x102/0x110 arch/x86/kernel/smpboot.c:314 common_startup_64+0x13e/0x147 The buggy address belongs to the object at ffff8880272a8000 which belongs to the cache task_struct of size 7424 The buggy address is located 2584 bytes inside of freed 7424-byte region [ffff8880272a8000, ffff8880272a9d00) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x272a8 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0xfff00000000040(head|node=0|zone=1|lastcpupid=0x7ff) page_type: f5(slab) raw: 00fff00000000040 ffff88801bafa500 dead000000000122 0000000000000000 raw: 0000000000000000 0000000080040004 00000001f5000000 0000000000000000 head: 00fff00000000040 ffff88801bafa500 dead000000000122 0000000000000000 head: 0000000000000000 0000000080040004 00000001f5000000 0000000000000000 head: 00fff00000000003 ffffea00009caa01 ffffffffffffffff 0000000000000000 head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 2, tgid 2 (kthreadd), ts 71247381401, free_ts 71214998153 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1537 prep_new_page mm/page_alloc.c:1545 [inline] get_page_from_freelist+0x3039/0x3180 mm/page_alloc.c:3457 __alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4733 alloc_pages_mpol_noprof+0x3e8/0x680 mm/mempolicy.c:2265 alloc_slab_page+0x6a/0x120 mm/slub.c:2413 allocate_slab+0x5a/0x2f0 mm/slub.c:2579 new_slab mm/slub.c:2632 [inline] ___slab_alloc+0xcd1/0x14b0 mm/slub.c:3819 __slab_alloc+0x58/0xa0 mm/slub.c:3909 __slab_alloc_node mm/slub.c:3962 [inline] slab_alloc_node mm/slub.c:4123 [inline] kmem_cache_alloc_node_noprof+0x1fe/0x320 mm/slub.c:4187 alloc_task_struct_node kernel/fork.c:180 [inline] dup_task_struct+0x57/0x8c0 kernel/fork.c:1107 copy_process+0x5d1/0x3d50 kernel/fork.c:2206 kernel_clone+0x223/0x880 kernel/fork.c:2787 kernel_thread+0x1bc/0x240 kernel/fork.c:2849 create_kthread kernel/kthread.c:412 [inline] kthreadd+0x60d/0x810 kernel/kthread.c:765 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 page last free pid 5230 tgid 5230 stack trace: reset_page_owner include/linux/page_owner.h:25 [inline] free_pages_prepare mm/page_alloc.c:1108 [inline] free_unref_page+0xcd0/0xf00 mm/page_alloc.c:2638 discard_slab mm/slub.c:2678 [inline] __put_partials+0xeb/0x130 mm/slub.c:3146 put_cpu_partial+0x17c/0x250 mm/slub.c:3221 __slab_free+0x2ea/0x3d0 mm/slub.c:4450 qlink_free mm/kasan/quarantine.c:163 [inline] qlist_free_all+0x9a/0x140 mm/kasan/quarantine.c:179 kasan_quarantine_reduce+0x14f/0x170 mm/kasan/quarantine.c:286 __kasan_slab_alloc+0x23/0x80 mm/kasan/common.c:329 kasan_slab_alloc include/linux/kasan.h:247 [inline] slab_post_alloc_hook mm/slub.c:4086 [inline] slab_alloc_node mm/slub.c:4135 [inline] kmem_cache_alloc_noprof+0x135/0x2a0 mm/slub.c:4142 getname_flags+0xb7/0x540 fs/namei.c:139 do_sys_openat2+0xd2/0x1d0 fs/open.c:1409 do_sys_open fs/open.c:1430 [inline] __do_sys_openat fs/open.c:1446 [inline] __se_sys_openat fs/open.c:1441 [inline] __x64_sys_openat+0x247/0x2a0 fs/open.c:1441 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Memory state around the buggy address: ffff8880272a8900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880272a8980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880272a8a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880272a8a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880272a8b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Reported-by: syzbot+8aaf2df2ef0164ffe1fb@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/66fb36b1.050a0220.aab67.003b.GAE@google.com/ CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Qu Wenruo Reviewed-by: Johannes Thumshirn Reviewed-by: David Sterba Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 1282f001cbf56e5dd6e90a18e205a566793f4be0 Author: Qu Wenruo Date: Sat Sep 28 08:05:58 2024 +0930 btrfs: fix a NULL pointer dereference when failed to start a new trasacntion commit c3b47f49e83197e8dffd023ec568403bcdbb774b upstream. [BUG] Syzbot reported a NULL pointer dereference with the following crash: FAULT_INJECTION: forcing a failure. start_transaction+0x830/0x1670 fs/btrfs/transaction.c:676 prepare_to_relocate+0x31f/0x4c0 fs/btrfs/relocation.c:3642 relocate_block_group+0x169/0xd20 fs/btrfs/relocation.c:3678 ... BTRFS info (device loop0): balance: ended with status: -12 Oops: general protection fault, probably for non-canonical address 0xdffffc00000000cc: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000660-0x0000000000000667] RIP: 0010:btrfs_update_reloc_root+0x362/0xa80 fs/btrfs/relocation.c:926 Call Trace: commit_fs_roots+0x2ee/0x720 fs/btrfs/transaction.c:1496 btrfs_commit_transaction+0xfaf/0x3740 fs/btrfs/transaction.c:2430 del_balance_item fs/btrfs/volumes.c:3678 [inline] reset_balance_state+0x25e/0x3c0 fs/btrfs/volumes.c:3742 btrfs_balance+0xead/0x10c0 fs/btrfs/volumes.c:4574 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3673 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [CAUSE] The allocation failure happens at the start_transaction() inside prepare_to_relocate(), and during the error handling we call unset_reloc_control(), which makes fs_info->balance_ctl to be NULL. Then we continue the error path cleanup in btrfs_balance() by calling reset_balance_state() which will call del_balance_item() to fully delete the balance item in the root tree. However during the small window between set_reloc_contrl() and unset_reloc_control(), we can have a subvolume tree update and created a reloc_root for that subvolume. Then we go into the final btrfs_commit_transaction() of del_balance_item(), and into btrfs_update_reloc_root() inside commit_fs_roots(). That function checks if fs_info->reloc_ctl is in the merge_reloc_tree stage, but since fs_info->reloc_ctl is NULL, it results a NULL pointer dereference. [FIX] Just add extra check on fs_info->reloc_ctl inside btrfs_update_reloc_root(), before checking fs_info->reloc_ctl->merge_reloc_tree. That DEAD_RELOC_TREE handling is to prevent further modification to the reloc tree during merge stage, but since there is no reloc_ctl at all, we do not need to bother that. Reported-by: syzbot+283673dbc38527ef9f3d@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/66f6bfa7.050a0220.38ace9.0019.GAE@google.com/ CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Josef Bacik Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit af40b4297a50d730e956c6ed96a8d9460b0a70a7 Author: Hans de Goede Date: Fri Sep 27 16:16:06 2024 +0200 ACPI: resource: Add Asus ExpertBook B2502CVA to irq1_level_low_skip_override[] commit 056301e7c7c886f96d799edd36f3406cc30e1822 upstream. Like other Asus ExpertBook models the B2502CVA has its keybopard IRQ (1) described as ActiveLow in the DSDT, which the kernel overrides to EdgeHigh which breaks the keyboard. Add the B2502CVA to the irq1_level_low_skip_override[] quirk table to fix this. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217760 Cc: All applicable Signed-off-by: Hans de Goede Link: https://patch.msgid.link/20240927141606.66826-4-hdegoede@redhat.com Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit fc2c013638127a7b75ae0cf16cb70e8bb7fcf9fd Author: Hans de Goede Date: Fri Sep 27 16:16:05 2024 +0200 ACPI: resource: Add Asus Vivobook X1704VAP to irq1_level_low_skip_override[] commit 2f80ce0b78c340e332f04a5801dee5e4ac8cfaeb upstream. Like other Asus Vivobook models the X1704VAP has its keybopard IRQ (1) described as ActiveLow in the DSDT, which the kernel overrides to EdgeHigh which breaks the keyboard. Add the X1704VAP to the irq1_level_low_skip_override[] quirk table to fix this. Reported-by: Lamome Julien Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1078696 Closes: https://lore.kernel.org/all/1226760b-4699-4529-bf57-6423938157a3@wanadoo.fr/ Cc: All applicable Signed-off-by: Hans de Goede Link: https://patch.msgid.link/20240927141606.66826-3-hdegoede@redhat.com Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit 5d9dcd5b217c56435a750b7f61f4b2e93e12c04f Author: Nuno Sa Date: Tue Oct 1 07:47:23 2024 -0700 Input: adp5589-keys - fix adp5589_gpio_get_value() commit c684771630e64bc39bddffeb65dd8a6612a6b249 upstream. The adp5589 seems to have the same behavior as similar devices as explained in commit 910a9f5636f5 ("Input: adp5588-keys - get value from data out when dir is out"). Basically, when the gpio is set as output we need to get the value from ADP5589_GPO_DATA_OUT_A register instead of ADP5589_GPI_STATUS_A. Fixes: 9d2e173644bb ("Input: ADP5589 - new driver for I2C Keypad Decoder and I/O Expander") Signed-off-by: Nuno Sa Link: https://lore.kernel.org/r/20241001-b4-dev-adp5589-fw-conversion-v1-2-fca0149dfc47@analog.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit fe6cdc1eeadf95364bd10a83af8c8cdc2b63b8bb Author: Krzysztof Kozlowski Date: Sun Aug 25 20:31:03 2024 +0200 rtc: at91sam9: fix OF node leak in probe() error path commit 73580e2ee6adfb40276bd420da3bb1abae204e10 upstream. Driver is leaking an OF node reference obtained from of_parse_phandle_with_fixed_args(). Fixes: 43e112bb3dea ("rtc: at91sam9: make use of syscon/regmap to access GPBR registers") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240825183103.102904-1-krzysztof.kozlowski@linaro.org Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman commit 3ba06256d2d6312cf57271ce43c0b8cf40a3c99f Author: Tetsuo Handa Date: Wed Sep 25 22:30:59 2024 +0900 tomoyo: fallback to realpath if symlink's pathname does not exist commit ada1986d07976d60bed5017aa38b7f7cf27883f7 upstream. Alfred Agrell found that TOMOYO cannot handle execveat(AT_EMPTY_PATH) inside chroot environment where /dev and /proc are not mounted, for commit 51f39a1f0cea ("syscalls: implement execveat() system call") missed that TOMOYO tries to canonicalize argv[0] when the filename fed to the executed program as argv[0] is supplied using potentially nonexistent pathname. Since "/dev/fd/" already lost symlink information used for obtaining that , it is too late to reconstruct symlink's pathname. Although part of "/dev/fd//" might not be canonicalized, TOMOYO cannot use tomoyo_realpath_nofollow() when /dev or /proc is not mounted. Therefore, fallback to tomoyo_realpath_from_path() when tomoyo_realpath_nofollow() failed. Reported-by: Alfred Agrell Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1082001 Fixes: 51f39a1f0cea ("syscalls: implement execveat() system call") Cc: stable@vger.kernel.org # v3.19+ Signed-off-by: Tetsuo Handa Signed-off-by: Greg Kroah-Hartman commit 844738f40ee8a088c41c5d1837aa18c47216c3f8 Author: Barnabás Czémán Date: Mon Aug 19 00:29:40 2024 +0200 iio: magnetometer: ak8975: Fix reading for ak099xx sensors commit 129464e86c7445a858b790ac2d28d35f58256bbe upstream. Move ST2 reading with overflow handling after measurement data reading. ST2 register read have to be read after read measurment data, because it means end of the reading and realease the lock on the data. Remove ST2 read skip on interrupt based waiting because ST2 required to be read out at and of the axis read. Fixes: 57e73a423b1e ("iio: ak8975: add ak09911 and ak09912 support") Signed-off-by: Barnabás Czémán Link: https://patch.msgid.link/20240819-ak09918-v4-2-f0734d14cfb9@mainlining.org Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 63bbe26471ebdcc3c20bb4cc3950d666279ad658 Author: Zheng Wang Date: Tue Jun 18 14:55:59 2024 +0530 media: venus: fix use after free bug in venus_remove due to race condition commit c5a85ed88e043474161bbfe54002c89c1cb50ee2 upstream. in venus_probe, core->work is bound with venus_sys_error_handler, which is used to handle error. The code use core->sys_err_done to make sync work. The core->work is started in venus_event_notify. If we call venus_remove, there might be an unfished work. The possible sequence is as follows: CPU0 CPU1 |venus_sys_error_handler venus_remove | hfi_destroy | venus_hfi_destroy | kfree(hdev); | |hfi_reinit |venus_hfi_queues_reinit |//use hdev Fix it by canceling the work in venus_remove. Cc: stable@vger.kernel.org Fixes: af2c3834c8ca ("[media] media: venus: adding core part and helper functions") Signed-off-by: Zheng Wang Signed-off-by: Dikshita Agarwal Signed-off-by: Stanimir Varbanov Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman commit 2f33c6b5fff3383d943512da7f079462e7571240 Author: Hans Verkuil Date: Wed Aug 7 09:22:10 2024 +0200 media: uapi/linux/cec.h: cec_msg_set_reply_to: zero flags commit 599f6899051cb70c4e0aa9fd591b9ee220cb6f14 upstream. The cec_msg_set_reply_to() helper function never zeroed the struct cec_msg flags field, this can cause unexpected behavior if flags was uninitialized to begin with. Signed-off-by: Hans Verkuil Fixes: 0dbacebede1e ("[media] cec: move the CEC framework out of staging and to media") Cc: Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit fd0ef59c996d89d99cb28c459bfd1d2730343a13 Author: Laurent Pinchart Date: Wed Jun 19 02:46:16 2024 +0300 media: sun4i_csi: Implement link validate for sun4i_csi subdev commit 2dc5d5d401f5c6cecd97800ffef82e8d17d228f0 upstream. The sun4i_csi driver doesn't implement link validation for the subdev it registers, leaving the link between the subdev and its source unvalidated. Fix it, using the v4l2_subdev_link_validate() helper. Fixes: 577bbf23b758 ("media: sunxi: Add A10 CSI driver") Cc: stable@vger.kernel.org Signed-off-by: Laurent Pinchart Acked-by: Chen-Yu Tsai Reviewed-by: Tomi Valkeinen Acked-by: Sakari Ailus Signed-off-by: Greg Kroah-Hartman commit dc57b2cd80d5a1b932ba575923864017c14d50e7 Author: Sebastian Reichel Date: Mon Mar 25 20:33:36 2024 +0100 clk: rockchip: fix error for unknown clocks commit 12fd64babaca4dc09d072f63eda76ba44119816a upstream. There is a clk == NULL check after the switch to check for unsupported clk types. Since clk is re-assigned in a loop, this check is useless right now for anything but the first round. Let's fix this up by assigning clk = NULL in the loop before the switch statement. Fixes: a245fecbb806 ("clk: rockchip: add basic infrastructure for clock branches") Cc: stable@vger.kernel.org Signed-off-by: Sebastian Reichel [added fixes + stable-cc] Link: https://lore.kernel.org/r/20240325193609.237182-6-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner Signed-off-by: Greg Kroah-Hartman commit a786265aecf39015418e4f930cc1c14603a01490 Author: Chun-Yi Lee Date: Wed Oct 2 11:54:58 2024 +0800 aoe: fix the potential use-after-free problem in more places commit 6d6e54fc71ad1ab0a87047fd9c211e75d86084a3 upstream. For fixing CVE-2023-6270, f98364e92662 ("aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts") makes tx() calling dev_put() instead of doing in aoecmd_cfg_pkts(). It avoids that the tx() runs into use-after-free. Then Nicolai Stange found more places in aoe have potential use-after-free problem with tx(). e.g. revalidate(), aoecmd_ata_rw(), resend(), probe() and aoecmd_cfg_rsp(). Those functions also use aoenet_xmit() to push packet to tx queue. So they should also use dev_hold() to increase the refcnt of skb->dev. On the other hand, moving dev_put() to tx() causes that the refcnt of skb->dev be reduced to a negative value, because corresponding dev_hold() are not called in revalidate(), aoecmd_ata_rw(), resend(), probe(), and aoecmd_cfg_rsp(). This patch fixed this issue. Cc: stable@vger.kernel.org Link: https://nvd.nist.gov/vuln/detail/CVE-2023-6270 Fixes: f98364e92662 ("aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts") Reported-by: Nicolai Stange Signed-off-by: Chun-Yi Lee Link: https://lore.kernel.org/stable/20240624064418.27043-1-jlee%40suse.com Link: https://lore.kernel.org/r/20241002035458.24401-1-jlee@suse.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit a3915200c8a8707e708b1652adee02bddc931d56 Author: Jisheng Zhang Date: Sat Jul 6 01:02:10 2024 +0800 riscv: define ILLEGAL_POINTER_VALUE for 64bit commit 5c178472af247c7b50f962495bb7462ba453b9fb upstream. This is used in poison.h for poison pointer offset. Based on current SV39, SV48 and SV57 vm layout, 0xdead000000000000 is a proper value that is not mappable, this can avoid potentially turning an oops to an expolit. Signed-off-by: Jisheng Zhang Fixes: fbe934d69eb7 ("RISC-V: Build Infrastructure") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240705170210.3236-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt Signed-off-by: Greg Kroah-Hartman commit e68c8323355e8cedfbe0bec7d5a39009f61640b6 Author: Lizhi Xu Date: Mon Sep 2 10:36:36 2024 +0800 ocfs2: fix possible null-ptr-deref in ocfs2_set_buffer_uptodate commit 33b525cef4cff49e216e4133cc48452e11c0391e upstream. When doing cleanup, if flags without OCFS2_BH_READAHEAD, it may trigger NULL pointer dereference in the following ocfs2_set_buffer_uptodate() if bh is NULL. Link: https://lkml.kernel.org/r/20240902023636.1843422-3-joseph.qi@linux.alibaba.com Fixes: cf76c78595ca ("ocfs2: don't put and assigning null to bh allocated outside") Signed-off-by: Lizhi Xu Signed-off-by: Joseph Qi Reviewed-by: Joseph Qi Reported-by: Heming Zhao Suggested-by: Heming Zhao Cc: [4.20+] Cc: Changwei Ge Cc: Gang He Cc: Joel Becker Cc: Jun Piao Cc: Junxiao Bi Cc: Mark Fasheh Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 703b2c7e0798d263154dc8593dc2345f75dc077f Author: Julian Sun Date: Mon Sep 2 11:08:44 2024 +0800 ocfs2: fix null-ptr-deref when journal load failed. commit 5784d9fcfd43bd853654bb80c87ef293b9e8e80a upstream. During the mounting process, if journal_reset() fails because of too short journal, then lead to jbd2_journal_load() fails with NULL j_sb_buffer. Subsequently, ocfs2_journal_shutdown() calls jbd2_journal_flush()->jbd2_cleanup_journal_tail()-> __jbd2_update_log_tail()->jbd2_journal_update_sb_log_tail() ->lock_buffer(journal->j_sb_buffer), resulting in a null-pointer dereference error. To resolve this issue, we should check the JBD2_LOADED flag to ensure the journal was properly loaded. Additionally, use journal instead of osb->journal directly to simplify the code. Link: https://syzkaller.appspot.com/bug?extid=05b9b39d8bdfe1a0861f Link: https://lkml.kernel.org/r/20240902030844.422725-1-sunjunchao2870@gmail.com Fixes: f6f50e28f0cb ("jbd2: Fail to load a journal if it is too short") Signed-off-by: Julian Sun Reported-by: syzbot+05b9b39d8bdfe1a0861f@syzkaller.appspotmail.com Suggested-by: Joseph Qi Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Gang He Cc: Jun Piao Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 9753bcb17b36c9add9b32c61766ddf8d2d161911 Author: Lizhi Xu Date: Mon Sep 2 10:36:35 2024 +0800 ocfs2: remove unreasonable unlock in ocfs2_read_blocks commit c03a82b4a0c935774afa01fd6d128b444fd930a1 upstream. Patch series "Misc fixes for ocfs2_read_blocks", v5. This series contains 2 fixes for ocfs2_read_blocks(). The first patch fix the issue reported by syzbot, which detects bad unlock balance in ocfs2_read_blocks(). The second patch fixes an issue reported by Heming Zhao when reviewing above fix. This patch (of 2): There was a lock release before exiting, so remove the unreasonable unlock. Link: https://lkml.kernel.org/r/20240902023636.1843422-1-joseph.qi@linux.alibaba.com Link: https://lkml.kernel.org/r/20240902023636.1843422-2-joseph.qi@linux.alibaba.com Fixes: cf76c78595ca ("ocfs2: don't put and assigning null to bh allocated outside") Signed-off-by: Lizhi Xu Signed-off-by: Joseph Qi Reviewed-by: Heming Zhao Reviewed-by: Joseph Qi Reported-by: syzbot+ab134185af9ef88dfed5@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ab134185af9ef88dfed5 Tested-by: syzbot+ab134185af9ef88dfed5@syzkaller.appspotmail.com Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Gang He Cc: Jun Piao Cc: [4.20+] Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 89043e7ed63c7fc141e68ea5a79758ed24b6c699 Author: Joseph Qi Date: Wed Sep 4 15:10:03 2024 +0800 ocfs2: cancel dqi_sync_work before freeing oinfo commit 35fccce29feb3706f649726d410122dd81b92c18 upstream. ocfs2_global_read_info() will initialize and schedule dqi_sync_work at the end, if error occurs after successfully reading global quota, it will trigger the following warning with CONFIG_DEBUG_OBJECTS_* enabled: ODEBUG: free active (active state 0) object: 00000000d8b0ce28 object type: timer_list hint: qsync_work_fn+0x0/0x16c This reports that there is an active delayed work when freeing oinfo in error handling, so cancel dqi_sync_work first. BTW, return status instead of -1 when .read_file_info fails. Link: https://syzkaller.appspot.com/bug?extid=f7af59df5d6b25f0febd Link: https://lkml.kernel.org/r/20240904071004.2067695-1-joseph.qi@linux.alibaba.com Fixes: 171bf93ce11f ("ocfs2: Periodic quota syncing") Signed-off-by: Joseph Qi Reviewed-by: Heming Zhao Reported-by: syzbot+f7af59df5d6b25f0febd@syzkaller.appspotmail.com Tested-by: syzbot+f7af59df5d6b25f0febd@syzkaller.appspotmail.com Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Gang He Cc: Jun Piao Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 74364cb578dcc0b6c9109519d19cbe5a56afac9a Author: Gautham Ananthakrishna Date: Wed Sep 18 06:38:44 2024 +0000 ocfs2: reserve space for inline xattr before attaching reflink tree commit 5ca60b86f57a4d9648f68418a725b3a7de2816b0 upstream. One of our customers reported a crash and a corrupted ocfs2 filesystem. The crash was due to the detection of corruption. Upon troubleshooting, the fsck -fn output showed the below corruption [EXTENT_LIST_FREE] Extent list in owner 33080590 claims 230 as the next free chain record, but fsck believes the largest valid value is 227. Clamp the next record value? n The stat output from the debugfs.ocfs2 showed the following corruption where the "Next Free Rec:" had overshot the "Count:" in the root metadata block. Inode: 33080590 Mode: 0640 Generation: 2619713622 (0x9c25a856) FS Generation: 904309833 (0x35e6ac49) CRC32: 00000000 ECC: 0000 Type: Regular Attr: 0x0 Flags: Valid Dynamic Features: (0x16) HasXattr InlineXattr Refcounted Extended Attributes Block: 0 Extended Attributes Inline Size: 256 User: 0 (root) Group: 0 (root) Size: 281320357888 Links: 1 Clusters: 141738 ctime: 0x66911b56 0x316edcb8 -- Fri Jul 12 06:02:30.829349048 2024 atime: 0x66911d6b 0x7f7a28d -- Fri Jul 12 06:11:23.133669517 2024 mtime: 0x66911b56 0x12ed75d7 -- Fri Jul 12 06:02:30.317552087 2024 dtime: 0x0 -- Wed Dec 31 17:00:00 1969 Refcount Block: 2777346 Last Extblk: 2886943 Orphan Slot: 0 Sub Alloc Slot: 0 Sub Alloc Bit: 14 Tree Depth: 1 Count: 227 Next Free Rec: 230 ## Offset Clusters Block# 0 0 2310 2776351 1 2310 2139 2777375 2 4449 1221 2778399 3 5670 731 2779423 4 6401 566 2780447 ....... .... ....... ....... .... ....... The issue was in the reflink workfow while reserving space for inline xattr. The problematic function is ocfs2_reflink_xattr_inline(). By the time this function is called the reflink tree is already recreated at the destination inode from the source inode. At this point, this function reserves space for inline xattrs at the destination inode without even checking if there is space at the root metadata block. It simply reduces the l_count from 243 to 227 thereby making space of 256 bytes for inline xattr whereas the inode already has extents beyond this index (in this case up to 230), thereby causing corruption. The fix for this is to reserve space for inline metadata at the destination inode before the reflink tree gets recreated. The customer has verified the fix. Link: https://lkml.kernel.org/r/20240918063844.1830332-1-gautham.ananthakrishna@oracle.com Fixes: ef962df057aa ("ocfs2: xattr: fix inlined xattr reflink") Signed-off-by: Gautham Ananthakrishna Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Gang He Cc: Jun Piao Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit cb9561ef13ef592c961ef85a39642f7960a204e6 Author: Joseph Qi Date: Wed Sep 25 17:06:00 2024 +0800 ocfs2: fix uninit-value in ocfs2_get_block() commit 2af148ef8549a12f8025286b8825c2833ee6bcb8 upstream. syzbot reported an uninit-value BUG: BUG: KMSAN: uninit-value in ocfs2_get_block+0xed2/0x2710 fs/ocfs2/aops.c:159 ocfs2_get_block+0xed2/0x2710 fs/ocfs2/aops.c:159 do_mpage_readpage+0xc45/0x2780 fs/mpage.c:225 mpage_readahead+0x43f/0x840 fs/mpage.c:374 ocfs2_readahead+0x269/0x320 fs/ocfs2/aops.c:381 read_pages+0x193/0x1110 mm/readahead.c:160 page_cache_ra_unbounded+0x901/0x9f0 mm/readahead.c:273 do_page_cache_ra mm/readahead.c:303 [inline] force_page_cache_ra+0x3b1/0x4b0 mm/readahead.c:332 force_page_cache_readahead mm/internal.h:347 [inline] generic_fadvise+0x6b0/0xa90 mm/fadvise.c:106 vfs_fadvise mm/fadvise.c:185 [inline] ksys_fadvise64_64 mm/fadvise.c:199 [inline] __do_sys_fadvise64 mm/fadvise.c:214 [inline] __se_sys_fadvise64 mm/fadvise.c:212 [inline] __x64_sys_fadvise64+0x1fb/0x3a0 mm/fadvise.c:212 x64_sys_call+0xe11/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:222 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f This is because when ocfs2_extent_map_get_blocks() fails, p_blkno is uninitialized. So the error log will trigger the above uninit-value access. The error log is out-of-date since get_blocks() was removed long time ago. And the error code will be logged in ocfs2_extent_map_get_blocks() once ocfs2_get_cluster() fails, so fix this by only logging inode and block. Link: https://syzkaller.appspot.com/bug?extid=9709e73bae885b05314b Link: https://lkml.kernel.org/r/20240925090600.3643376-1-joseph.qi@linux.alibaba.com Fixes: ccd979bdbce9 ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem") Signed-off-by: Joseph Qi Reported-by: syzbot+9709e73bae885b05314b@syzkaller.appspotmail.com Tested-by: syzbot+9709e73bae885b05314b@syzkaller.appspotmail.com Cc: Heming Zhao Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Gang He Cc: Jun Piao Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit efbe8e49a65f3d993b1f906a3905c18ded7dcc01 Author: Heming Zhao Date: Fri Jul 19 19:43:10 2024 +0800 ocfs2: fix the la space leak when unmounting an ocfs2 volume commit dfe6c5692fb525e5e90cefe306ee0dffae13d35f upstream. This bug has existed since the initial OCFS2 code. The code logic in ocfs2_sync_local_to_main() is wrong, as it ignores the last contiguous free bits, which causes an OCFS2 volume to lose the last free clusters of LA window on each umount command. Link: https://lkml.kernel.org/r/20240719114310.14245-1-heming.zhao@suse.com Signed-off-by: Heming Zhao Reviewed-by: Su Yue Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Gang He Cc: Jun Piao Cc: Heming Zhao Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit c383263ee82a01a5a9bc1a466025ccde39a38cae Author: Danilo Krummrich Date: Tue Aug 13 00:34:34 2024 +0200 mm: krealloc: consider spare memory for __GFP_ZERO commit 1a83a716ec233990e1fd5b6fbb1200ade63bf450 upstream. As long as krealloc() is called with __GFP_ZERO consistently, starting with the initial memory allocation, __GFP_ZERO should be fully honored. However, if for an existing allocation krealloc() is called with a decreased size, it is not ensured that the spare portion the allocation is zeroed. Thus, if krealloc() is subsequently called with a larger size again, __GFP_ZERO can't be fully honored, since we don't know the previous size, but only the bucket size. Example: buf = kzalloc(64, GFP_KERNEL); memset(buf, 0xff, 64); buf = krealloc(buf, 48, GFP_KERNEL | __GFP_ZERO); /* After this call the last 16 bytes are still 0xff. */ buf = krealloc(buf, 64, GFP_KERNEL | __GFP_ZERO); Fix this, by explicitly setting spare memory to zero, when shrinking an allocation with __GFP_ZERO flag set or init_on_alloc enabled. Link: https://lkml.kernel.org/r/20240812223707.32049-1-dakr@kernel.org Signed-off-by: Danilo Krummrich Acked-by: Vlastimil Babka Acked-by: David Rientjes Cc: Christoph Lameter Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Joonsoo Kim Cc: Pekka Enberg Cc: Roman Gushchin Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit d5dc65370a746750dbb2f03eabcf86b18db65f32 Author: Baokun Li Date: Thu Jul 18 19:53:36 2024 +0800 jbd2: stop waiting for space when jbd2_cleanup_journal_tail() returns error commit f5cacdc6f2bb2a9bf214469dd7112b43dd2dd68a upstream. In __jbd2_log_wait_for_space(), we might call jbd2_cleanup_journal_tail() to recover some journal space. But if an error occurs while executing jbd2_cleanup_journal_tail() (e.g., an EIO), we don't stop waiting for free space right away, we try other branches, and if j_committing_transaction is NULL (i.e., the tid is 0), we will get the following complain: ============================================ JBD2: I/O error when updating journal superblock for sdd-8. __jbd2_log_wait_for_space: needed 256 blocks and only had 217 space available __jbd2_log_wait_for_space: no way to get more journal space in sdd-8 ------------[ cut here ]------------ WARNING: CPU: 2 PID: 139804 at fs/jbd2/checkpoint.c:109 __jbd2_log_wait_for_space+0x251/0x2e0 Modules linked in: CPU: 2 PID: 139804 Comm: kworker/u8:3 Not tainted 6.6.0+ #1 RIP: 0010:__jbd2_log_wait_for_space+0x251/0x2e0 Call Trace: add_transaction_credits+0x5d1/0x5e0 start_this_handle+0x1ef/0x6a0 jbd2__journal_start+0x18b/0x340 ext4_dirty_inode+0x5d/0xb0 __mark_inode_dirty+0xe4/0x5d0 generic_update_time+0x60/0x70 [...] ============================================ So only if jbd2_cleanup_journal_tail() returns 1, i.e., there is nothing to clean up at the moment, continue to try to reclaim free space in other ways. Note that this fix relies on commit 6f6a6fda2945 ("jbd2: fix ocfs2 corrupt when updating journal superblock fails") to make jbd2_cleanup_journal_tail return the correct error code. Fixes: 8c3f25d8950c ("jbd2: don't give up looking for space so easily in __jbd2_log_wait_for_space") Cc: stable@kernel.org Signed-off-by: Baokun Li Reviewed-by: Jan Kara Link: https://patch.msgid.link/20240718115336.2554501-1-libaokun@huaweicloud.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman commit c17a4f52fa3c3dac2dd6a3c38f2de7342d97d74c Author: Ma Ke Date: Thu Aug 8 14:13:36 2024 +0800 drm: omapdrm: Add missing check for alloc_ordered_workqueue commit e794b7b9b92977365c693760a259f8eef940c536 upstream. As it may return NULL pointer and cause NULL pointer dereference. Add check for the return value of alloc_ordered_workqueue. Cc: stable@vger.kernel.org Fixes: 2f95bc6d324a ("drm: omapdrm: Perform initialization/cleanup at probe/remove time") Signed-off-by: Ma Ke Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20240808061336.2796729-1-make24@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman commit 6cda6810049b04b49db1e7217b3d2147c6a5fd78 Author: Andrew Jones Date: Sat Aug 17 09:41:08 2024 +0200 of/irq: Support #msi-cells=<0> in of_msi_get_domain commit db8e81132cf051843c9a59b46fa5a071c45baeb3 upstream. An 'msi-parent' property with a single entry and no accompanying '#msi-cells' property is considered the legacy definition as opposed to its definition after being expanded with commit 126b16e2ad98 ("Docs: dt: add generic MSI bindings"). However, the legacy definition is completely compatible with the current definition and, since of_phandle_iterator_next() tolerates missing and present-but- zero *cells properties since commit e42ee61017f5 ("of: Let of_for_each_phandle fallback to non-negative cell_count"), there's no need anymore to special case the legacy definition in of_msi_get_domain(). Indeed, special casing has turned out to be harmful, because, as of commit 7c025238b47a ("dt-bindings: irqchip: Describe the IMX MU block as a MSI controller"), MSI controller DT bindings have started specifying '#msi-cells' as a required property (even when the value must be zero) as an effort to make the bindings more explicit. But, since the special casing of 'msi-parent' only uses the existence of '#msi-cells' for its heuristic, and not whether or not it's also nonzero, the legacy path is not taken. Furthermore, the path to support the new, broader definition isn't taken either since that path has been restricted to the platform-msi bus. But, neither the definition of 'msi-parent' nor the definition of '#msi-cells' is platform-msi-specific (the platform-msi bus was just the first bus that needed '#msi-cells'), so remove both the special casing and the restriction. The code removal also requires changing to of_parse_phandle_with_optional_args() in order to ensure the legacy (but compatible) use of 'msi-parent' remains supported. This not only simplifies the code but also resolves an issue with PCI devices finding their MSI controllers on riscv, as the riscv,imsics binding requires '#msi-cells=<0>'. Signed-off-by: Andrew Jones Link: https://lore.kernel.org/r/20240817074107.31153-2-ajones@ventanamicro.com Cc: stable@vger.kernel.org Signed-off-by: Rob Herring (Arm) Signed-off-by: Greg Kroah-Hartman commit c20a17c2d2720a5f6fa31abb61d0b4cc13769bf0 Author: Helge Deller Date: Sat Sep 7 18:28:11 2024 +0200 parisc: Fix stack start for ADDR_NO_RANDOMIZE personality commit f31b256994acec6929306dfa86ac29716e7503d6 upstream. Fix the stack start address calculation for the parisc architecture in setup_arg_pages() when address randomization is disabled. When the ADDR_NO_RANDOMIZE process personality is disabled there is no need to add additional space for the stack. Note that this patch touches code inside an #ifdef CONFIG_STACK_GROWSUP hunk, which is why only the parisc architecture is affected since it's the only Linux architecture where the stack grows upwards. Without this patch you will find the stack in the middle of some mapped libaries and suddenly limited to 6MB instead of 8MB: root@parisc:~# setarch -R /bin/bash -c "cat /proc/self/maps" 00010000-00019000 r-xp 00000000 08:05 1182034 /usr/bin/cat 00019000-0001a000 rwxp 00009000 08:05 1182034 /usr/bin/cat 0001a000-0003b000 rwxp 00000000 00:00 0 [heap] f90c4000-f9283000 r-xp 00000000 08:05 1573004 /usr/lib/hppa-linux-gnu/libc.so.6 f9283000-f9285000 r--p 001bf000 08:05 1573004 /usr/lib/hppa-linux-gnu/libc.so.6 f9285000-f928a000 rwxp 001c1000 08:05 1573004 /usr/lib/hppa-linux-gnu/libc.so.6 f928a000-f9294000 rwxp 00000000 00:00 0 f9301000-f9323000 rwxp 00000000 00:00 0 [stack] f98b4000-f98e4000 r-xp 00000000 08:05 1572869 /usr/lib/hppa-linux-gnu/ld.so.1 f98e4000-f98e5000 r--p 00030000 08:05 1572869 /usr/lib/hppa-linux-gnu/ld.so.1 f98e5000-f98e9000 rwxp 00031000 08:05 1572869 /usr/lib/hppa-linux-gnu/ld.so.1 f9ad8000-f9b00000 rw-p 00000000 00:00 0 f9b00000-f9b01000 r-xp 00000000 00:00 0 [vdso] With the patch the stack gets correctly mapped at the end of the process memory map: root@panama:~# setarch -R /bin/bash -c "cat /proc/self/maps" 00010000-00019000 r-xp 00000000 08:13 16385582 /usr/bin/cat 00019000-0001a000 rwxp 00009000 08:13 16385582 /usr/bin/cat 0001a000-0003b000 rwxp 00000000 00:00 0 [heap] fef29000-ff0eb000 r-xp 00000000 08:13 16122400 /usr/lib/hppa-linux-gnu/libc.so.6 ff0eb000-ff0ed000 r--p 001c2000 08:13 16122400 /usr/lib/hppa-linux-gnu/libc.so.6 ff0ed000-ff0f2000 rwxp 001c4000 08:13 16122400 /usr/lib/hppa-linux-gnu/libc.so.6 ff0f2000-ff0fc000 rwxp 00000000 00:00 0 ff4b4000-ff4e4000 r-xp 00000000 08:13 16121913 /usr/lib/hppa-linux-gnu/ld.so.1 ff4e4000-ff4e6000 r--p 00030000 08:13 16121913 /usr/lib/hppa-linux-gnu/ld.so.1 ff4e6000-ff4ea000 rwxp 00032000 08:13 16121913 /usr/lib/hppa-linux-gnu/ld.so.1 ff6d7000-ff6ff000 rw-p 00000000 00:00 0 ff6ff000-ff700000 r-xp 00000000 00:00 0 [vdso] ff700000-ff722000 rwxp 00000000 00:00 0 [stack] Reported-by: Camm Maguire Signed-off-by: Helge Deller Fixes: d045c77c1a69 ("parisc,metag: Fix crashes due to stack randomization on stack-grows-upwards architectures") Fixes: 17d9822d4b4c ("parisc: Consider stack randomization for mmap base only when necessary") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Greg Kroah-Hartman commit 8eed55de0d632be2f1170fae35cf36a2637a4c4d Author: Helge Deller Date: Sun Sep 8 00:40:38 2024 +0200 parisc: Fix 64-bit userspace syscall path commit d24449864da5838936669618356b0e30ca2999c3 upstream. Currently the glibc isn't yet ported to 64-bit for hppa, so there is no usable userspace available yet. But it's possible to manually build a static 64-bit binary and run that for testing. One such 64-bit test program is available at http://ftp.parisc-linux.org/src/64bit.tar.gz and it shows various issues with the existing 64-bit syscall path in the kernel. This patch fixes those issues. Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Greg Kroah-Hartman commit 897e2f5192fc31e47673698bcb6ac9dbc630535d Author: Luis Henriques (SUSE) Date: Wed Jul 24 17:11:15 2024 +0100 ext4: fix incorrect tid assumption in ext4_wait_for_tail_page_commit() commit dd589b0f1445e1ea1085b98edca6e4d5dedb98d0 upstream. Function ext4_wait_for_tail_page_commit() assumes that '0' is not a valid value for transaction IDs, which is incorrect. Don't assume that and invoke jbd2_log_wait_commit() if the journal had a committing transaction instead. Signed-off-by: Luis Henriques (SUSE) Reviewed-by: Jan Kara Link: https://patch.msgid.link/20240724161119.13448-2-luis.henriques@linux.dev Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman commit f9fd47c9d9548f9e47fa60098eab99dde175401d Author: Baokun Li Date: Thu Aug 22 10:35:28 2024 +0800 ext4: fix double brelse() the buffer of the extents path commit dcaa6c31134c0f515600111c38ed7750003e1b9c upstream. In ext4_ext_try_to_merge_up(), set path[1].p_bh to NULL after it has been released, otherwise it may be released twice. An example of what triggers this is as follows: split2 map split1 |--------|-------|--------| ext4_ext_map_blocks ext4_ext_handle_unwritten_extents ext4_split_convert_extents // path->p_depth == 0 ext4_split_extent // 1. do split1 ext4_split_extent_at |ext4_ext_insert_extent | ext4_ext_create_new_leaf | ext4_ext_grow_indepth | le16_add_cpu(&neh->eh_depth, 1) | ext4_find_extent | // return -ENOMEM |// get error and try zeroout |path = ext4_find_extent | path->p_depth = 1 |ext4_ext_try_to_merge | ext4_ext_try_to_merge_up | path->p_depth = 0 | brelse(path[1].p_bh) ---> not set to NULL here |// zeroout success // 2. update path ext4_find_extent // 3. do split2 ext4_split_extent_at ext4_ext_insert_extent ext4_ext_create_new_leaf ext4_ext_grow_indepth le16_add_cpu(&neh->eh_depth, 1) ext4_find_extent path[0].p_bh = NULL; path->p_depth = 1 read_extent_tree_block ---> return err // path[1].p_bh is still the old value ext4_free_ext_path ext4_ext_drop_refs // path->p_depth == 1 brelse(path[1].p_bh) ---> brelse a buffer twice Finally got the following WARRNING when removing the buffer from lru: ============================================ VFS: brelse: Trying to free free buffer WARNING: CPU: 2 PID: 72 at fs/buffer.c:1241 __brelse+0x58/0x90 CPU: 2 PID: 72 Comm: kworker/u19:1 Not tainted 6.9.0-dirty #716 RIP: 0010:__brelse+0x58/0x90 Call Trace: __find_get_block+0x6e7/0x810 bdev_getblk+0x2b/0x480 __ext4_get_inode_loc+0x48a/0x1240 ext4_get_inode_loc+0xb2/0x150 ext4_reserve_inode_write+0xb7/0x230 __ext4_mark_inode_dirty+0x144/0x6a0 ext4_ext_insert_extent+0x9c8/0x3230 ext4_ext_map_blocks+0xf45/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] ============================================ Fixes: ecb94f5fdf4b ("ext4: collapse a single extent tree block into the inode if possible") Cc: stable@kernel.org Signed-off-by: Baokun Li Reviewed-by: Jan Kara Reviewed-by: Ojaswin Mujoo Tested-by: Ojaswin Mujoo Link: https://patch.msgid.link/20240822023545.1994557-9-libaokun@huaweicloud.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman commit 975ca06f3fd154c5f7742083e7b2574c57d1c0c3 Author: Baokun Li Date: Thu Aug 22 10:35:26 2024 +0800 ext4: aovid use-after-free in ext4_ext_insert_extent() commit a164f3a432aae62ca23d03e6d926b122ee5b860d upstream. As Ojaswin mentioned in Link, in ext4_ext_insert_extent(), if the path is reallocated in ext4_ext_create_new_leaf(), we'll use the stale path and cause UAF. Below is a sample trace with dummy values: ext4_ext_insert_extent path = *ppath = 2000 ext4_ext_create_new_leaf(ppath) ext4_find_extent(ppath) path = *ppath = 2000 if (depth > path[0].p_maxdepth) kfree(path = 2000); *ppath = path = NULL; path = kcalloc() = 3000 *ppath = 3000; return path; /* here path is still 2000, UAF! */ eh = path[depth].p_hdr ================================================================== BUG: KASAN: slab-use-after-free in ext4_ext_insert_extent+0x26d4/0x3330 Read of size 8 at addr ffff8881027bf7d0 by task kworker/u36:1/179 CPU: 3 UID: 0 PID: 179 Comm: kworker/u6:1 Not tainted 6.11.0-rc2-dirty #866 Call Trace: ext4_ext_insert_extent+0x26d4/0x3330 ext4_ext_map_blocks+0xe22/0x2d40 ext4_map_blocks+0x71e/0x1700 ext4_do_writepages+0x1290/0x2800 [...] Allocated by task 179: ext4_find_extent+0x81c/0x1f70 ext4_ext_map_blocks+0x146/0x2d40 ext4_map_blocks+0x71e/0x1700 ext4_do_writepages+0x1290/0x2800 ext4_writepages+0x26d/0x4e0 do_writepages+0x175/0x700 [...] Freed by task 179: kfree+0xcb/0x240 ext4_find_extent+0x7c0/0x1f70 ext4_ext_insert_extent+0xa26/0x3330 ext4_ext_map_blocks+0xe22/0x2d40 ext4_map_blocks+0x71e/0x1700 ext4_do_writepages+0x1290/0x2800 ext4_writepages+0x26d/0x4e0 do_writepages+0x175/0x700 [...] ================================================================== So use *ppath to update the path to avoid the above problem. Reported-by: Ojaswin Mujoo Closes: https://lore.kernel.org/r/ZqyL6rmtwl6N4MWR@li-bb2b2a4c-3307-11b2-a85c-8fa5c3a69313.ibm.com Fixes: 10809df84a4d ("ext4: teach ext4_ext_find_extent() to realloc path if necessary") Cc: stable@kernel.org Signed-off-by: Baokun Li Reviewed-by: Jan Kara Link: https://patch.msgid.link/20240822023545.1994557-7-libaokun@huaweicloud.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman commit 2bcfc2dc6da751ebcfa9450e065209b9f0b54e6d Author: Luis Henriques (SUSE) Date: Wed Jul 24 17:11:16 2024 +0100 ext4: fix incorrect tid assumption in __jbd2_log_wait_for_space() commit 972090651ee15e51abfb2160e986fa050cfc7a40 upstream. Function __jbd2_log_wait_for_space() assumes that '0' is not a valid value for transaction IDs, which is incorrect. Don't assume that and invoke jbd2_log_wait_commit() if the journal had a committing transaction instead. Signed-off-by: Luis Henriques (SUSE) Reviewed-by: Jan Kara Link: https://patch.msgid.link/20240724161119.13448-3-luis.henriques@linux.dev Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman commit 0ddc7a7933dfaf17acccf7f804d51ca7a1688dac Author: Baokun Li Date: Thu Aug 22 10:35:30 2024 +0800 ext4: propagate errors from ext4_find_extent() in ext4_insert_range() commit 369c944ed1d7c3fb7b35f24e4735761153afe7b3 upstream. Even though ext4_find_extent() returns an error, ext4_insert_range() still returns 0. This may confuse the user as to why fallocate returns success, but the contents of the file are not as expected. So propagate the error returned by ext4_find_extent() to avoid inconsistencies. Fixes: 331573febb6a ("ext4: Add support FALLOC_FL_INSERT_RANGE for fallocate") Cc: stable@kernel.org Signed-off-by: Baokun Li Reviewed-by: Jan Kara Reviewed-by: Ojaswin Mujoo Tested-by: Ojaswin Mujoo Link: https://patch.msgid.link/20240822023545.1994557-11-libaokun@huaweicloud.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman commit cdfd6ef391df332c9abb854f4530dd7bfbd71dc4 Author: Edward Adam Davis Date: Mon Jul 1 22:25:03 2024 +0800 ext4: no need to continue when the number of entries is 1 commit 1a00a393d6a7fb1e745a41edd09019bd6a0ad64c upstream. Fixes: ac27a0ec112a ("[PATCH] ext4: initial copy of files from ext3") Reported-by: syzbot+ae688d469e36fb5138d0@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ae688d469e36fb5138d0 Signed-off-by: Edward Adam Davis Reported-and-tested-by: syzbot+ae688d469e36fb5138d0@syzkaller.appspotmail.com Link: https://patch.msgid.link/tencent_BE7AEE6C7C2D216CB8949CE8E6EE7ECC2C0A@qq.com Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman commit f49f4fd18d51b797347376a8a37126bc76d01163 Author: Jaroslav Kysela Date: Wed Oct 2 21:46:49 2024 +0200 ALSA: core: add isascii() check to card ID generator commit d278a9de5e1837edbe57b2f1f95a104ff6c84846 upstream. The card identifier should contain only safe ASCII characters. The isalnum() returns true also for characters for non-ASCII characters. Link: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/4135 Link: https://lore.kernel.org/linux-sound/yk3WTvKkwheOon_LzZlJ43PPInz6byYfBzpKkbasww1yzuiMRqn7n6Y8vZcXB-xwFCu_vb8hoNjv7DTNwH5TWjpEuiVsyn9HPCEXqwF4120=@protonmail.com/ Cc: stable@vger.kernel.org Reported-by: Barnabás Pőcze Signed-off-by: Jaroslav Kysela Link: https://patch.msgid.link/20241002194649.1944696-1-perex@perex.cz Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 24b4c5be6abf4028b84f48a73cf82f76b6502451 Author: Thomas Zimmermann Date: Mon Sep 23 09:58:14 2024 +0200 drm: Consistently use struct drm_mode_rect for FB_DAMAGE_CLIPS commit 8b0d2f61545545ab5eef923ed6e59fc3be2385e0 upstream. FB_DAMAGE_CLIPS is a plane property for damage handling. Its UAPI should only use UAPI types. Hence replace struct drm_rect with struct drm_mode_rect in drm_atomic_plane_set_property(). Both types are identical in practice, so there's no change in behavior. Reported-by: Ville Syrjälä Closes: https://lore.kernel.org/dri-devel/Zu1Ke1TuThbtz15E@intel.com/ Signed-off-by: Thomas Zimmermann Fixes: d3b21767821e ("drm: Add a new plane property to send damage during plane update") Cc: Lukasz Spintzyk Cc: Deepak Rawat Cc: Daniel Vetter Cc: Thomas Hellstrom Cc: David Airlie Cc: Simona Vetter Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: Thomas Zimmermann Cc: dri-devel@lists.freedesktop.org Cc: # v5.0+ Reviewed-by: Dmitry Baryshkov Link: https://patchwork.freedesktop.org/patch/msgid/20240923075841.16231-1-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman commit 107937ba8000e60bd06a3ce8bf1f0d52d6cacc4b Author: Helge Deller Date: Tue Sep 10 18:32:24 2024 +0200 parisc: Fix itlb miss handler for 64-bit programs commit 9542130937e9dc707dd7c6b7af73326437da2d50 upstream. For an itlb miss when executing code above 4 Gb on ILP64 adjust the iasq/iaoq in the same way isr/ior was adjusted. This fixes signal delivery for the 64-bit static test program from http://ftp.parisc-linux.org/src/64bit.tar.gz. Note that signals are handled by the signal trampoline code in the 64-bit VDSO which is mapped into high userspace memory region above 4GB for 64-bit processes. Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Greg Kroah-Hartman commit d34659994015c9e89e055e4659a439e925441fa9 Author: Luo Gengkun Date: Sat Aug 31 07:43:15 2024 +0000 perf/core: Fix small negative period being ignored commit 62c0b1061593d7012292f781f11145b2d46f43ab upstream. In perf_adjust_period, we will first calculate period, and then use this period to calculate delta. However, when delta is less than 0, there will be a deviation compared to when delta is greater than or equal to 0. For example, when delta is in the range of [-14,-1], the range of delta = delta + 7 is between [-7,6], so the final value of delta/8 is 0. Therefore, the impact of -1 and -2 will be ignored. This is unacceptable when the target period is very short, because we will lose a lot of samples. Here are some tests and analyzes: before: # perf record -e cs -F 1000 ./a.out [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.022 MB perf.data (518 samples) ] # perf script ... a.out 396 257.956048: 23 cs: ffffffff81f4eeec schedul> a.out 396 257.957891: 23 cs: ffffffff81f4eeec schedul> a.out 396 257.959730: 23 cs: ffffffff81f4eeec schedul> a.out 396 257.961545: 23 cs: ffffffff81f4eeec schedul> a.out 396 257.963355: 23 cs: ffffffff81f4eeec schedul> a.out 396 257.965163: 23 cs: ffffffff81f4eeec schedul> a.out 396 257.966973: 23 cs: ffffffff81f4eeec schedul> a.out 396 257.968785: 23 cs: ffffffff81f4eeec schedul> a.out 396 257.970593: 23 cs: ffffffff81f4eeec schedul> ... after: # perf record -e cs -F 1000 ./a.out [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.058 MB perf.data (1466 samples) ] # perf script ... a.out 395 59.338813: 11 cs: ffffffff81f4eeec schedul> a.out 395 59.339707: 12 cs: ffffffff81f4eeec schedul> a.out 395 59.340682: 13 cs: ffffffff81f4eeec schedul> a.out 395 59.341751: 13 cs: ffffffff81f4eeec schedul> a.out 395 59.342799: 12 cs: ffffffff81f4eeec schedul> a.out 395 59.343765: 11 cs: ffffffff81f4eeec schedul> a.out 395 59.344651: 11 cs: ffffffff81f4eeec schedul> a.out 395 59.345539: 12 cs: ffffffff81f4eeec schedul> a.out 395 59.346502: 13 cs: ffffffff81f4eeec schedul> ... test.c int main() { for (int i = 0; i < 20000; i++) usleep(10); return 0; } # time ./a.out real 0m1.583s user 0m0.040s sys 0m0.298s The above results were tested on x86-64 qemu with KVM enabled using test.c as test program. Ideally, we should have around 1500 samples, but the previous algorithm had only about 500, whereas the modified algorithm now has about 1400. Further more, the new version shows 1 sample per 0.001s, while the previous one is 1 sample per 0.002s.This indicates that the new algorithm is more sensitive to small negative values compared to old algorithm. Fixes: bd2b5b12849a ("perf_counter: More aggressive frequency adjustment") Signed-off-by: Luo Gengkun Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Adrian Hunter Reviewed-by: Kan Liang Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20240831074316.2106159-2-luogengkun@huaweicloud.com Signed-off-by: Greg Kroah-Hartman commit fec2ccd74bd2fc84484a1dcd71e36d228310971a Author: Jinjie Ruan Date: Mon Aug 19 20:33:48 2024 +0800 spi: bcm63xx: Fix module autoloading commit 909f34f2462a99bf876f64c5c61c653213e32fce upstream. Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from platform_device_id table. Fixes: 44d8fb30941d ("spi/bcm63xx: move register definitions into the driver") Cc: stable@vger.kernel.org Signed-off-by: Jinjie Ruan Reviewed-by: Jonas Gorski Link: https://patch.msgid.link/20240819123349.4020472-2-ruanjinjie@huawei.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 006c109da9cc5f5c297c5ff74586c4a6143a30ce Author: Krzysztof Kozlowski Date: Fri Aug 16 15:57:21 2024 +0200 firmware: tegra: bpmp: Drop unused mbox_client_to_bpmp() commit 9c3a62c20f7fb00294a4237e287254456ba8a48b upstream. mbox_client_to_bpmp() is not used, W=1 builds: drivers/firmware/tegra/bpmp.c:28:1: error: unused function 'mbox_client_to_bpmp' [-Werror,-Wunused-function] Fixes: cdfa358b248e ("firmware: tegra: Refactor BPMP driver") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski Signed-off-by: Thierry Reding Signed-off-by: Greg Kroah-Hartman commit 33efc8da7700f2144240d41348cf2db0261ea5e1 Author: Robert Hancock Date: Tue Nov 21 18:11:16 2023 +0000 i2c: xiic: Wait for TX empty to avoid missed TX NAKs commit 521da1e9225450bd323db5fa5bca942b1dc485b7 upstream. Frequently an I2C write will be followed by a read, such as a register address write followed by a read of the register value. In this driver, when the TX FIFO half empty interrupt was raised and it was determined that there was enough space in the TX FIFO to send the following read command, it would do so without waiting for the TX FIFO to actually empty. Unfortunately it appears that in some cases this can result in a NAK that was raised by the target device on the write, such as due to an unsupported register address, being ignored and the subsequent read being done anyway. This can potentially put the I2C bus into an invalid state and/or result in invalid read data being processed. To avoid this, once a message has been fully written to the TX FIFO, wait for the TX FIFO empty interrupt before moving on to the next message, to ensure NAKs are handled properly. Fixes: e1d5b6598cdc ("i2c: Add support for Xilinx XPS IIC Bus Interface") Signed-off-by: Robert Hancock Cc: # v2.6.34+ Reviewed-by: Manikanta Guntupalli Acked-by: Michal Simek Signed-off-by: Andi Shyti Signed-off-by: Greg Kroah-Hartman commit d6f1250a4d5773f447740b9fe37b8692105796d4 Author: Marek Vasut Date: Mon Sep 30 21:27:41 2024 +0200 i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume commit 048bbbdbf85e5e00258dfb12f5e368f908801d7b upstream. In case there is any sort of clock controller attached to this I2C bus controller, for example Versaclock or even an AIC32x4 I2C codec, then an I2C transfer triggered from the clock controller clk_ops .prepare callback may trigger a deadlock on drivers/clk/clk.c prepare_lock mutex. This is because the clock controller first grabs the prepare_lock mutex and then performs the prepare operation, including its I2C access. The I2C access resumes this I2C bus controller via .runtime_resume callback, which calls clk_prepare_enable(), which attempts to grab the prepare_lock mutex again and deadlocks. Since the clock are already prepared since probe() and unprepared in remove(), use simple clk_enable()/clk_disable() calls to enable and disable the clock on runtime suspend and resume, to avoid hitting the prepare_lock mutex. Acked-by: Alain Volmat Signed-off-by: Marek Vasut Fixes: 4e7bca6fc07b ("i2c: i2c-stm32f7: add PM Runtime support") Cc: # v5.0+ Signed-off-by: Andi Shyti Signed-off-by: Greg Kroah-Hartman commit f53c17123b072818b53e7314bd6da664c0709321 Author: Christophe Leroy Date: Fri Aug 30 14:28:37 2024 +0200 selftests: vDSO: fix vDSO symbols lookup for powerpc64 [ Upstream commit ba83b3239e657469709d15dcea5f9b65bf9dbf34 ] On powerpc64, following tests fail locating vDSO functions: ~ # ./vdso_test_abi TAP version 13 1..16 # [vDSO kselftest] VDSO_VERSION: LINUX_2.6.15 # Couldn't find __kernel_gettimeofday ok 1 # SKIP __kernel_gettimeofday # clock_id: CLOCK_REALTIME # Couldn't find __kernel_clock_gettime ok 2 # SKIP __kernel_clock_gettime CLOCK_REALTIME # Couldn't find __kernel_clock_getres ok 3 # SKIP __kernel_clock_getres CLOCK_REALTIME ... # Couldn't find __kernel_time ok 16 # SKIP __kernel_time # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:16 error:0 ~ # ./vdso_test_getrandom __kernel_getrandom is missing! ~ # ./vdso_test_gettimeofday Could not find __kernel_gettimeofday ~ # ./vdso_test_getcpu Could not find __kernel_getcpu On powerpc64, as shown below by readelf, vDSO functions symbols have type NOTYPE, so also accept that type when looking for symbols. $ powerpc64-linux-gnu-readelf -a arch/powerpc/kernel/vdso/vdso64.so.dbg ELF Header: Magic: 7f 45 4c 46 02 02 01 00 00 00 00 00 00 00 00 00 Class: ELF64 Data: 2's complement, big endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: DYN (Shared object file) Machine: PowerPC64 Version: 0x1 ... Symbol table '.dynsym' contains 12 entries: Num: Value Size Type Bind Vis Ndx Name 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND 1: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 2: 00000000000005f0 36 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 3: 0000000000000578 68 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 4: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15 5: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 6: 0000000000000614 172 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 7: 00000000000006f0 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 8: 000000000000047c 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 9: 0000000000000454 12 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 10: 00000000000004d0 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 11: 00000000000005bc 52 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 Symbol table '.symtab' contains 56 entries: Num: Value Size Type Bind Vis Ndx Name ... 45: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15 46: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __kernel_getcpu 47: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __kernel_clock_getres 48: 00000000000005f0 36 NOTYPE GLOBAL DEFAULT 8 __kernel_get_tbfreq 49: 000000000000047c 84 NOTYPE GLOBAL DEFAULT 8 __kernel_gettimeofday 50: 0000000000000614 172 NOTYPE GLOBAL DEFAULT 8 __kernel_sync_dicache 51: 00000000000006f0 84 NOTYPE GLOBAL DEFAULT 8 __kernel_getrandom 52: 0000000000000454 12 NOTYPE GLOBAL DEFAULT 8 __kernel_sigtram[...] 53: 0000000000000578 68 NOTYPE GLOBAL DEFAULT 8 __kernel_time 54: 00000000000004d0 84 NOTYPE GLOBAL DEFAULT 8 __kernel_clock_g[...] 55: 00000000000005bc 52 NOTYPE GLOBAL DEFAULT 8 __kernel_get_sys[...] Fixes: 98eedc3a9dbf ("Document the vDSO and add a reference parser") Signed-off-by: Christophe Leroy Acked-by: Shuah Khan Signed-off-by: Jason A. Donenfeld Signed-off-by: Sasha Levin commit 48441fd34fe86bf367974869a9f4ce216141b74b Author: Yifei Liu Date: Mon Sep 30 15:40:25 2024 -0700 selftests: breakpoints: use remaining time to check if suspend succeed [ Upstream commit c66be905cda24fb782b91053b196bd2e966f95b7 ] step_after_suspend_test fails with device busy error while writing to /sys/power/state to start suspend. The test believes it failed to enter suspend state with $ sudo ./step_after_suspend_test TAP version 13 Bail out! Failed to enter Suspend state However, in the kernel message, I indeed see the system get suspended and then wake up later. [611172.033108] PM: suspend entry (s2idle) [611172.044940] Filesystems sync: 0.006 seconds [611172.052254] Freezing user space processes [611172.059319] Freezing user space processes completed (elapsed 0.001 seconds) [611172.067920] OOM killer disabled. [611172.072465] Freezing remaining freezable tasks [611172.080332] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [611172.089724] printk: Suspending console(s) (use no_console_suspend to debug) [611172.117126] serial 00:03: disabled some other hardware get reconnected [611203.136277] OOM killer enabled. [611203.140637] Restarting tasks ... [611203.141135] usb 1-8.1: USB disconnect, device number 7 [611203.141755] done. [611203.155268] random: crng reseeded on system resumption [611203.162059] PM: suspend exit After investigation, I noticed that for the code block if (write(power_state_fd, "mem", strlen("mem")) != strlen("mem")) ksft_exit_fail_msg("Failed to enter Suspend state\n"); The write will return -1 and errno is set to 16 (device busy). It should be caused by the write function is not successfully returned before the system suspend and the return value get messed when waking up. As a result, It may be better to check the time passed of those few instructions to determine whether the suspend is executed correctly for it is pretty hard to execute those few lines for 5 seconds. The timer to wake up the system is set to expire after 5 seconds and no re-arm. If the timer remaining time is 0 second and 0 nano secomd, it means the timer expired and wake the system up. Otherwise, the system could be considered to enter the suspend state failed if there is any remaining time. After appling this patch, the test would not fail for it believes the system does not go to suspend by mistake. It now could continue to the rest part of the test after suspend. Fixes: bfd092b8c272 ("selftests: breakpoint: add step_after_suspend_test") Reported-by: Sinadin Shan Signed-off-by: Yifei Liu Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin commit d5d9b789c3d4b525de50ff217fa27d513fc5b9d3 Author: Ben Dooks Date: Tue Sep 24 14:40:08 2024 +0100 spi: s3c64xx: fix timeout counters in flush_fifo [ Upstream commit 68a16708d2503b6303d67abd43801e2ca40c208d ] In the s3c64xx_flush_fifo() code, the loops counter is post-decremented in the do { } while(test && loops--) condition. This means the loops is left at the unsigned equivalent of -1 if the loop times out. The test after will never pass as if tests for loops == 0. Signed-off-by: Ben Dooks Fixes: 230d42d422e7 ("spi: Add s3c64xx SPI Controller driver") Reviewed-by: Andi Shyti Link: https://patch.msgid.link/20240924134009.116247-2-ben.dooks@codethink.co.uk Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 3c46d6060d3e38de22196c1fe7706c5a3c696285 Author: Artem Sadovnikov Date: Thu Aug 29 15:22:09 2024 +0000 ext4: fix i_data_sem unlock order in ext4_ind_migrate() [ Upstream commit cc749e61c011c255d81b192a822db650c68b313f ] Fuzzing reports a possible deadlock in jbd2_log_wait_commit. This issue is triggered when an EXT4_IOC_MIGRATE ioctl is set to require synchronous updates because the file descriptor is opened with O_SYNC. This can lead to the jbd2_journal_stop() function calling jbd2_might_wait_for_commit(), potentially causing a deadlock if the EXT4_IOC_MIGRATE call races with a write(2) system call. This problem only arises when CONFIG_PROVE_LOCKING is enabled. In this case, the jbd2_might_wait_for_commit macro locks jbd2_handle in the jbd2_journal_stop function while i_data_sem is locked. This triggers lockdep because the jbd2_journal_start function might also lock the same jbd2_handle simultaneously. Found by Linux Verification Center (linuxtesting.org) with syzkaller. Reviewed-by: Ritesh Harjani (IBM) Co-developed-by: Mikhail Ukhin Signed-off-by: Mikhail Ukhin Signed-off-by: Artem Sadovnikov Rule: add Link: https://lore.kernel.org/stable/20240404095000.5872-1-mish.uxin2012%40yandex.ru Link: https://patch.msgid.link/20240829152210.2754-1-ancowi69@gmail.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit 556452e98624491ecb055d7bdafd4b2a318ff51b Author: Thadeu Lima de Souza Cascardo Date: Wed Aug 21 12:23:21 2024 -0300 ext4: ext4_search_dir should return a proper error [ Upstream commit cd69f8f9de280e331c9e6ff689ced0a688a9ce8f ] ext4_search_dir currently returns -1 in case of a failure, while it returns 0 when the name is not found. In such failure cases, it should return an error code instead. This becomes even more important when ext4_find_inline_entry returns an error code as well in the next commit. -EFSCORRUPTED seems appropriate as such error code as these failures would be caused by unexpected record lengths and is in line with other instances of ext4_check_dir_entry failures. In the case of ext4_dx_find_entry, the current use of ERR_BAD_DX_DIR was left as is to reduce the risk of regressions. Signed-off-by: Thadeu Lima de Souza Cascardo Link: https://patch.msgid.link/20240821152324.3621860-2-cascardo@igalia.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit 7bd0f5cb6dc636f463cb85c0286fdf70e41f7f85 Author: Geert Uytterhoeven Date: Tue Aug 20 14:16:53 2024 +0200 of/irq: Refer to actual buffer size in of_irq_parse_one() [ Upstream commit 39ab331ab5d377a18fbf5a0e0b228205edfcc7f4 ] Replace two open-coded calculations of the buffer size by invocations of sizeof() on the buffer itself, to make sure the code will always use the actual buffer size. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/817c0b9626fd30790fc488c472a3398324cfcc0c.1724156125.git.geert+renesas@glider.be Signed-off-by: Rob Herring (Arm) Signed-off-by: Sasha Levin commit e17a5b8192870e13a5dc43e58053e62d352ac8c2 Author: Geert Uytterhoeven Date: Tue Jul 30 17:58:12 2024 +0200 drm/radeon/r100: Handle unknown family in r100_cp_init_microcode() [ Upstream commit c6dbab46324b1742b50dc2fb5c1fee2c28129439 ] With -Werror: In function ‘r100_cp_init_microcode’, inlined from ‘r100_cp_init’ at drivers/gpu/drm/radeon/r100.c:1136:7: include/linux/printk.h:465:44: error: ‘%s’ directive argument is null [-Werror=format-overflow=] 465 | #define printk(fmt, ...) printk_index_wrap(_printk, fmt, ##__VA_ARGS__) | ^ include/linux/printk.h:437:17: note: in definition of macro ‘printk_index_wrap’ 437 | _p_func(_fmt, ##__VA_ARGS__); \ | ^~~~~~~ include/linux/printk.h:508:9: note: in expansion of macro ‘printk’ 508 | printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) | ^~~~~~ drivers/gpu/drm/radeon/r100.c:1062:17: note: in expansion of macro ‘pr_err’ 1062 | pr_err("radeon_cp: Failed to load firmware \"%s\"\n", fw_name); | ^~~~~~ Fix this by converting the if/else if/... construct into a proper switch() statement with a default to handle the error case. As a bonus, the generated code is ca. 100 bytes smaller (with gcc 11.4.0 targeting arm32). Signed-off-by: Geert Uytterhoeven Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 7e19f1d2847f0f81b7eab23803b426104e6c27a3 Author: Kees Cook Date: Thu Jul 11 14:57:37 2024 -0700 scsi: aacraid: Rearrange order of struct aac_srb_unit [ Upstream commit 6e5860b0ad4934baee8c7a202c02033b2631bb44 ] struct aac_srb_unit contains struct aac_srb, which contains struct sgmap, which ends in a (currently) "fake" (1-element) flexible array. Converting this to a flexible array is needed so that runtime bounds checking won't think the array is fixed size (i.e. under CONFIG_FORTIFY_SOURCE=y and/or CONFIG_UBSAN_BOUNDS=y), as other parts of aacraid use struct sgmap as a flexible array. It is not legal to have a flexible array in the middle of a structure, so it either needs to be split up or rearranged so that it is at the end of the structure. Luckily, struct aac_srb_unit, which is exclusively consumed/updated by aac_send_safw_bmic_cmd(), does not depend on member ordering. The values set in the on-stack struct aac_srb_unit instance "srbu" by the only two callers, aac_issue_safw_bmic_identify() and aac_get_safw_ciss_luns(), do not contain anything in srbu.srb.sgmap.sg, and they both implicitly initialize srbu.srb.sgmap.count to 0 during memset(). For example: memset(&srbu, 0, sizeof(struct aac_srb_unit)); srbcmd = &srbu.srb; srbcmd->flags = cpu_to_le32(SRB_DataIn); srbcmd->cdb[0] = CISS_REPORT_PHYSICAL_LUNS; srbcmd->cdb[1] = 2; /* extended reporting */ srbcmd->cdb[8] = (u8)(datasize >> 8); srbcmd->cdb[9] = (u8)(datasize); rcode = aac_send_safw_bmic_cmd(dev, &srbu, phys_luns, datasize); During aac_send_safw_bmic_cmd(), a separate srb is mapped into DMA, and has srbu.srb copied into it: srb = fib_data(fibptr); memcpy(srb, &srbu->srb, sizeof(struct aac_srb)); Only then is srb.sgmap.count written and srb->sg populated: srb->count = cpu_to_le32(xfer_len); sg64 = (struct sgmap64 *)&srb->sg; sg64->count = cpu_to_le32(1); sg64->sg[0].addr[1] = cpu_to_le32(upper_32_bits(addr)); sg64->sg[0].addr[0] = cpu_to_le32(lower_32_bits(addr)); sg64->sg[0].count = cpu_to_le32(xfer_len); But this is happening in the DMA memory, not in srbu.srb. An attempt to copy the changes back to srbu does happen: /* * Copy the updated data for other dumping or other usage if * needed */ memcpy(&srbu->srb, srb, sizeof(struct aac_srb)); But this was never correct: the sg64 (3 u32s) overlap of srb.sg (2 u32s) always meant that srbu.srb would have held truncated information and any attempt to walk srbu.srb.sg.sg based on the value of srbu.srb.sg.count would result in attempting to parse past the end of srbu.srb.sg.sg[0] into srbu.srb_reply. After getting a reply from hardware, the reply is copied into srbu.srb_reply: srb_reply = (struct aac_srb_reply *)fib_data(fibptr); memcpy(&srbu->srb_reply, srb_reply, sizeof(struct aac_srb_reply)); This has always been fixed-size, so there's no issue here. It is worth noting that the two callers _never check_ srbu contents -- neither srbu.srb nor srbu.srb_reply is examined. (They depend on the mapped xfer_buf instead.) Therefore, the ordering of members in struct aac_srb_unit does not matter, and the flexible array member can moved to the end. (Additionally, the two memcpy()s that update srbu could be entirely removed as they are never consumed, but I left that as-is.) Signed-off-by: Kees Cook Link: https://lore.kernel.org/r/20240711215739.208776-1-kees@kernel.org Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 93a4273e5f8844e669dad3ec0b40925901b26301 Author: Matthew Brost Date: Thu Aug 1 08:41:17 2024 -0700 drm/printer: Allow NULL data in devcoredump printer [ Upstream commit 53369581dc0c68a5700ed51e1660f44c4b2bb524 ] We want to determine the size of the devcoredump before writing it out. To that end, we will run the devcoredump printer with NULL data to get the size, alloc data based on the generated offset, then run the devcorecump again with a valid data pointer to print. This necessitates not writing data to the data pointer on the initial pass, when it is NULL. v5: - Better commit message (Jonathan) - Add kerenl doc with examples (Jani) Cc: Maarten Lankhorst Acked-by: Maarten Lankhorst Signed-off-by: Matthew Brost Reviewed-by: Jonathan Cavitt Link: https://patchwork.freedesktop.org/patch/msgid/20240801154118.2547543-3-matthew.brost@intel.com Signed-off-by: Sasha Levin commit 8f0abb39c16e719129de10596b3ae3363fa178b4 Author: Alex Hung Date: Mon Jul 15 09:57:01 2024 -0600 drm/amd/display: Initialize get_bytes_per_element's default to 1 [ Upstream commit 4067f4fa0423a89fb19a30b57231b384d77d2610 ] Variables, used as denominators and maybe not assigned to other values, should not be 0. bytes_per_element_y & bytes_per_element_c are initialized by get_bytes_per_element() which should never return 0. This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity. Signed-off-by: Alex Hung Reviewed-by: Aurabindo Pillai Tested-by: Daniel Wheeler Signed-off-by: Rodrigo Siqueira Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit f5f6d90087131812c1e4b9d3103f400f1624396d Author: Srinivasan Shanmugam Date: Sat Jul 20 17:48:27 2024 +0530 drm/amd/display: Fix index out of bounds in degamma hardware format translation [ Upstream commit b7e99058eb2e86aabd7a10761e76cae33d22b49f ] Fixes index out of bounds issue in `cm_helper_translate_curve_to_degamma_hw_format` function. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:594 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:595 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:596 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max Cc: Tom Chung Cc: Rodrigo Siqueira Cc: Roman Li Cc: Alex Hung Cc: Aurabindo Pillai Cc: Harry Wentland Cc: Hamza Mahfooz Signed-off-by: Srinivasan Shanmugam Reviewed-by: Tom Chung Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 471c53350ab83e47a2a117c2738ce0363785976e Author: Alex Hung Date: Thu Jun 27 20:05:14 2024 -0600 drm/amd/display: Check stream before comparing them [ Upstream commit 35ff747c86767937ee1e0ca987545b7eed7a0810 ] [WHAT & HOW] amdgpu_dm can pass a null stream to dc_is_stream_unchanged. It is necessary to check for null before dereferencing them. This fixes 1 FORWARD_NULL issue reported by Coverity. Reviewed-by: Rodrigo Siqueira Signed-off-by: Jerry Zuo Signed-off-by: Alex Hung Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit dac398ed272a378d2f42ac68ae408333a51baf52 Author: Zhao Mengmeng Date: Wed Sep 4 09:07:58 2024 +0800 jfs: Fix uninit-value access of new_ea in ea_buffer [ Upstream commit 2b59ffad47db1c46af25ccad157bb3b25147c35c ] syzbot reports that lzo1x_1_do_compress is using uninit-value: ===================================================== BUG: KMSAN: uninit-value in lzo1x_1_do_compress+0x19f9/0x2510 lib/lzo/lzo1x_compress.c:178 ... Uninit was stored to memory at: ea_put fs/jfs/xattr.c:639 [inline] ... Local variable ea_buf created at: __jfs_setxattr+0x5d/0x1ae0 fs/jfs/xattr.c:662 __jfs_xattr_set+0xe6/0x1f0 fs/jfs/xattr.c:934 ===================================================== The reason is ea_buf->new_ea is not initialized properly. Fix this by using memset to empty its content at the beginning in ea_get(). Reported-by: syzbot+02341e0daa42a15ce130@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=02341e0daa42a15ce130 Signed-off-by: Zhao Mengmeng Signed-off-by: Dave Kleikamp Signed-off-by: Sasha Levin commit 35b91f15f44ce3c01eba058ccb864bb04743e792 Author: Edward Adam Davis Date: Sat Aug 24 09:25:23 2024 +0800 jfs: check if leafidx greater than num leaves per dmap tree [ Upstream commit d64ff0d2306713ff084d4b09f84ed1a8c75ecc32 ] syzbot report a out of bounds in dbSplit, it because dmt_leafidx greater than num leaves per dmap tree, add a checking for dmt_leafidx in dbFindLeaf. Shaggy: Modified sanity check to apply to control pages as well as leaf pages. Reported-and-tested-by: syzbot+dca05492eff41f604890@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=dca05492eff41f604890 Signed-off-by: Edward Adam Davis Signed-off-by: Dave Kleikamp Signed-off-by: Sasha Levin commit 3126ccde51f51b0648c8cdccaf916e8bd062e972 Author: Edward Adam Davis Date: Sat Aug 24 10:50:48 2024 +0800 jfs: Fix uaf in dbFreeBits [ Upstream commit d6c1b3599b2feb5c7291f5ac3a36e5fa7cedb234 ] [syzbot reported] ================================================================== BUG: KASAN: slab-use-after-free in __mutex_lock_common kernel/locking/mutex.c:587 [inline] BUG: KASAN: slab-use-after-free in __mutex_lock+0xfe/0xd70 kernel/locking/mutex.c:752 Read of size 8 at addr ffff8880229254b0 by task syz-executor357/5216 CPU: 0 UID: 0 PID: 5216 Comm: syz-executor357 Not tainted 6.11.0-rc3-syzkaller-00156-gd7a5aa4b3c00 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 Call Trace: __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 __mutex_lock_common kernel/locking/mutex.c:587 [inline] __mutex_lock+0xfe/0xd70 kernel/locking/mutex.c:752 dbFreeBits+0x7ea/0xd90 fs/jfs/jfs_dmap.c:2390 dbFreeDmap fs/jfs/jfs_dmap.c:2089 [inline] dbFree+0x35b/0x680 fs/jfs/jfs_dmap.c:409 dbDiscardAG+0x8a9/0xa20 fs/jfs/jfs_dmap.c:1650 jfs_ioc_trim+0x433/0x670 fs/jfs/jfs_discard.c:100 jfs_ioctl+0x2d0/0x3e0 fs/jfs/ioctl.c:131 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 Freed by task 5218: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object+0xe0/0x150 mm/kasan/common.c:240 __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2252 [inline] slab_free mm/slub.c:4473 [inline] kfree+0x149/0x360 mm/slub.c:4594 dbUnmount+0x11d/0x190 fs/jfs/jfs_dmap.c:278 jfs_mount_rw+0x4ac/0x6a0 fs/jfs/jfs_mount.c:247 jfs_remount+0x3d1/0x6b0 fs/jfs/super.c:454 reconfigure_super+0x445/0x880 fs/super.c:1083 vfs_cmd_reconfigure fs/fsopen.c:263 [inline] vfs_fsconfig_locked fs/fsopen.c:292 [inline] __do_sys_fsconfig fs/fsopen.c:473 [inline] __se_sys_fsconfig+0xb6e/0xf80 fs/fsopen.c:345 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [Analysis] There are two paths (dbUnmount and jfs_ioc_trim) that generate race condition when accessing bmap, which leads to the occurrence of uaf. Use the lock s_umount to synchronize them, in order to avoid uaf caused by race condition. Reported-and-tested-by: syzbot+3c010e21296f33a5dc16@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis Signed-off-by: Dave Kleikamp Signed-off-by: Sasha Levin commit 22b166d7e52bf60abbbdba9588d364056775e791 Author: Remington Brasga Date: Wed Jul 10 00:12:44 2024 +0000 jfs: UBSAN: shift-out-of-bounds in dbFindBits [ Upstream commit b0b2fc815e514221f01384f39fbfbff65d897e1c ] Fix issue with UBSAN throwing shift-out-of-bounds warning. Reported-by: syzbot+e38d703eeb410b17b473@syzkaller.appspotmail.com Signed-off-by: Remington Brasga Signed-off-by: Dave Kleikamp Signed-off-by: Sasha Levin commit 2fe34fe07fc2466a6669368d37b5fa5c38f2d6ba Author: Damien Le Moal Date: Fri Jul 26 11:14:11 2024 +0900 ata: sata_sil: Rename sil_blacklist to sil_quirks [ Upstream commit 93b0f9e11ce511353c65b7f924cf5f95bd9c3aba ] Rename the array sil_blacklist to sil_quirks as this name is more neutral and is also consistent with how this driver define quirks with the SIL_QUIRK_XXX flags. Signed-off-by: Damien Le Moal Reviewed-by: Niklas Cassel Reviewed-by: Igor Pylypiv Signed-off-by: Sasha Levin commit d35ad25f9848fd3b6448868da7c97e6bf754a421 Author: Andrew Davis Date: Mon Jun 10 09:28:36 2024 -0500 power: reset: brcmstb: Do not go into infinite loop if reset fails [ Upstream commit cf8c39b00e982fa506b16f9d76657838c09150cb ] There may be other backup reset methods available, do not halt here so that other reset methods can be tried. Signed-off-by: Andrew Davis Reviewed-by: Dhruva Gole Acked-by: Florian Fainelli Link: https://lore.kernel.org/r/20240610142836.168603-5-afd@ti.com Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin commit 6d0a07f68b66269e167def6c0b90a219cd3e7473 Author: Kaixin Wang Date: Wed Sep 11 22:29:52 2024 +0800 fbdev: pxafb: Fix possible use after free in pxafb_task() [ Upstream commit 4a6921095eb04a900e0000da83d9475eb958e61e ] In the pxafb_probe function, it calls the pxafb_init_fbinfo function, after which &fbi->task is associated with pxafb_task. Moreover, within this pxafb_init_fbinfo function, the pxafb_blank function within the &pxafb_ops struct is capable of scheduling work. If we remove the module which will call pxafb_remove to make cleanup, it will call unregister_framebuffer function which can call do_unregister_framebuffer to free fbi->fb through put_fb_info(fb_info), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | pxafb_task pxafb_remove | unregister_framebuffer(info) | do_unregister_framebuffer(fb_info) | put_fb_info(fb_info) | // free fbi->fb | set_ctrlr_state(fbi, state) | __pxafb_lcd_power(fbi, 0) | fbi->lcd_power(on, &fbi->fb.var) | //use fbi->fb Fix it by ensuring that the work is canceled before proceeding with the cleanup in pxafb_remove. Note that only root user can remove the driver at runtime. Signed-off-by: Kaixin Wang Signed-off-by: Helge Deller Signed-off-by: Sasha Levin commit da13b253ad2aadb72379027ee01054859406f761 Author: Kees Cook Date: Mon Jul 8 13:22:06 2024 -0700 x86/syscall: Avoid memcpy() for ia32 syscall_get_arguments() [ Upstream commit d19d638b1e6cf746263ef60b7d0dee0204d8216a ] Modern (fortified) memcpy() prefers to avoid writing (or reading) beyond the end of the addressed destination (or source) struct member: In function ‘fortify_memcpy_chk’, inlined from ‘syscall_get_arguments’ at ./arch/x86/include/asm/syscall.h:85:2, inlined from ‘populate_seccomp_data’ at kernel/seccomp.c:258:2, inlined from ‘__seccomp_filter’ at kernel/seccomp.c:1231:3: ./include/linux/fortify-string.h:580:25: error: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning] 580 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ As already done for x86_64 and compat mode, do not use memcpy() to extract syscall arguments from struct pt_regs but rather just perform direct assignments. Binary output differences are negligible, and actually ends up using less stack space: - sub $0x84,%esp + sub $0x6c,%esp and less text size: text data bss dec hex filename 10794 252 0 11046 2b26 gcc-32b/kernel/seccomp.o.stock 10714 252 0 10966 2ad6 gcc-32b/kernel/seccomp.o.after Closes: https://lore.kernel.org/lkml/9b69fb14-df89-4677-9c82-056ea9e706f5@gmail.com/ Reported-by: Mirsad Todorovac Signed-off-by: Kees Cook Signed-off-by: Dave Hansen Reviewed-by: Gustavo A. R. Silva Acked-by: Dave Hansen Tested-by: Mirsad Todorovac Link: https://lore.kernel.org/all/20240708202202.work.477-kees%40kernel.org Signed-off-by: Sasha Levin commit 8e5dd7d86722e2170dbee01a858fb885daf5fe9c Author: Takashi Iwai Date: Thu Aug 8 11:15:12 2024 +0200 ALSA: hdsp: Break infinite MIDI input flush loop [ Upstream commit c01f3815453e2d5f699ccd8c8c1f93a5b8669e59 ] The current MIDI input flush on HDSP and HDSPM drivers relies on the hardware reporting the right value. If the hardware doesn't give the proper value but returns -1, it may be stuck at an infinite loop. Add a counter and break if the loop is unexpectedly too long. Link: https://patch.msgid.link/20240808091513.31380-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit ce2953e44829ec54bcbb57e9d890fc8af0900c80 Author: Takashi Iwai Date: Thu Aug 8 11:14:42 2024 +0200 ALSA: asihpi: Fix potential OOB array access [ Upstream commit 7b986c7430a6bb68d523dac7bfc74cbd5b44ef96 ] ASIHPI driver stores some values in the static array upon a response from the driver, and its index depends on the firmware. We shouldn't trust it blindly. This patch adds a sanity check of the array index to fit in the array size. Link: https://patch.msgid.link/20240808091454.30846-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 53e9c1ab16607489a0d094b819ad1e0a67f1bc49 Author: Thomas Gleixner Date: Mon Jun 10 18:42:34 2024 +0200 signal: Replace BUG_ON()s [ Upstream commit 7f8af7bac5380f2d95a63a6f19964e22437166e1 ] These really can be handled gracefully without killing the machine. Signed-off-by: Thomas Gleixner Signed-off-by: Frederic Weisbecker Reviewed-by: Oleg Nesterov Acked-by: Peter Zijlstra (Intel) Signed-off-by: Sasha Levin commit 267960ded65e10d1bd6d2ed84bc87a65f93d7847 Author: Jinjie Ruan Date: Wed Sep 11 17:44:45 2024 +0800 nfp: Use IRQF_NO_AUTOEN flag in request_irq() [ Upstream commit daaba19d357f0900b303a530ced96c78086267ea ] disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ. Reviewed-by: Louis Peens Signed-off-by: Jinjie Ruan Link: https://patch.msgid.link/20240911094445.1922476-4-ruanjinjie@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit f9310a6704bf52e2493480edea896e1f9b795d40 Author: Gustavo A. R. Silva Date: Wed Aug 21 15:23:51 2024 -0600 wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_cmd_802_11_scan_ext() [ Upstream commit 498365e52bebcbc36a93279fe7e9d6aec8479cee ] Replace one-element array with a flexible-array member in `struct host_cmd_ds_802_11_scan_ext`. With this, fix the following warning: elo 16 17:51:58 surfacebook kernel: ------------[ cut here ]------------ elo 16 17:51:58 surfacebook kernel: memcpy: detected field-spanning write (size 243) of single field "ext_scan->tlv_buffer" at drivers/net/wireless/marvell/mwifiex/scan.c:2239 (size 1) elo 16 17:51:58 surfacebook kernel: WARNING: CPU: 0 PID: 498 at drivers/net/wireless/marvell/mwifiex/scan.c:2239 mwifiex_cmd_802_11_scan_ext+0x83/0x90 [mwifiex] Reported-by: Andy Shevchenko Closes: https://lore.kernel.org/linux-hardening/ZsZNgfnEwOcPdCly@black.fi.intel.com/ Signed-off-by: Gustavo A. R. Silva Reviewed-by: Andy Shevchenko Acked-by: Brian Norris Signed-off-by: Kalle Valo Link: https://patch.msgid.link/ZsZa5xRcsLq9D+RX@elsanto Signed-off-by: Sasha Levin commit 299b9175940e77d31c0307d3baf86b53260a3a58 Author: Adrian Ratiu Date: Fri Aug 2 11:02:25 2024 +0300 proc: add config & param to block forcing mem writes [ Upstream commit 41e8149c8892ed1962bd15350b3c3e6e90cba7f4 ] This adds a Kconfig option and boot param to allow removing the FOLL_FORCE flag from /proc/pid/mem write calls because it can be abused. The traditional forcing behavior is kept as default because it can break GDB and some other use cases. Previously we tried a more sophisticated approach allowing distributions to fine-tune /proc/pid/mem behavior, however that got NAK-ed by Linus [1], who prefers this simpler approach with semantics also easier to understand for users. Link: https://lore.kernel.org/lkml/CAHk-=wiGWLChxYmUA5HrT5aopZrB7_2VTa0NLZcxORgkUe5tEQ@mail.gmail.com/ [1] Cc: Doug Anderson Cc: Jeff Xu Cc: Jann Horn Cc: Kees Cook Cc: Ard Biesheuvel Cc: Christian Brauner Suggested-by: Linus Torvalds Signed-off-by: Linus Torvalds Signed-off-by: Adrian Ratiu Link: https://lore.kernel.org/r/20240802080225.89408-1-adrian.ratiu@collabora.com Signed-off-by: Christian Brauner Signed-off-by: Sasha Levin commit f3b2acb1b6d18c3d9633763cd127c7413ace252d Author: Aleksandrs Vinarskis Date: Sun Aug 11 23:33:44 2024 +0200 ACPICA: iasl: handle empty connection_node [ Upstream commit a0a2459b79414584af6c46dd8c6f866d8f1aa421 ] ACPICA commit 6c551e2c9487067d4b085333e7fe97e965a11625 Link: https://github.com/acpica/acpica/commit/6c551e2c Signed-off-by: Aleksandrs Vinarskis Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit fb66354a6ad469d2c05c26264491e58ebf0baca3 Author: Jason Xing Date: Fri Aug 23 08:11:52 2024 +0800 tcp: avoid reusing FIN_WAIT2 when trying to find port in connect() process [ Upstream commit 0d9e5df4a257afc3a471a82961ace9a22b88295a ] We found that one close-wait socket was reset by the other side due to a new connection reusing the same port which is beyond our expectation, so we have to investigate the underlying reason. The following experiment is conducted in the test environment. We limit the port range from 40000 to 40010 and delay the time to close() after receiving a fin from the active close side, which can help us easily reproduce like what happened in production. Here are three connections captured by tcpdump: 127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965525191 127.0.0.1.9999 > 127.0.0.1.40002: Flags [S.], seq 2769915070 127.0.0.1.40002 > 127.0.0.1.9999: Flags [.], ack 1 127.0.0.1.40002 > 127.0.0.1.9999: Flags [F.], seq 1, ack 1 // a few seconds later, within 60 seconds 127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965590730 127.0.0.1.9999 > 127.0.0.1.40002: Flags [.], ack 2 127.0.0.1.40002 > 127.0.0.1.9999: Flags [R], seq 2965525193 // later, very quickly 127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965590730 127.0.0.1.9999 > 127.0.0.1.40002: Flags [S.], seq 3120990805 127.0.0.1.40002 > 127.0.0.1.9999: Flags [.], ack 1 As we can see, the first flow is reset because: 1) client starts a new connection, I mean, the second one 2) client tries to find a suitable port which is a timewait socket (its state is timewait, substate is fin_wait2) 3) client occupies that timewait port to send a SYN 4) server finds a corresponding close-wait socket in ehash table, then replies with a challenge ack 5) client sends an RST to terminate this old close-wait socket. I don't think the port selection algo can choose a FIN_WAIT2 socket when we turn on tcp_tw_reuse because on the server side there remain unread data. In some cases, if one side haven't call close() yet, we should not consider it as expendable and treat it at will. Even though, sometimes, the server isn't able to call close() as soon as possible like what we expect, it can not be terminated easily, especially due to a second unrelated connection happening. After this patch, we can see the expected failure if we start a connection when all the ports are occupied in fin_wait2 state: "Ncat: Cannot assign requested address." Reported-by: Jade Dong Signed-off-by: Jason Xing Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20240823001152.31004-1-kerneljasonxing@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit b9d3b0459bb722cd644b492f863e62fdefc95b8f Author: Ido Schimmel Date: Wed Aug 14 15:52:22 2024 +0300 ipv4: Mask upper DSCP bits and ECN bits in NETLINK_FIB_LOOKUP family [ Upstream commit 8fed54758cd248cd311a2b5c1e180abef1866237 ] The NETLINK_FIB_LOOKUP netlink family can be used to perform a FIB lookup according to user provided parameters and communicate the result back to user space. However, unlike other users of the FIB lookup API, the upper DSCP bits and the ECN bits of the DS field are not masked, which can result in the wrong result being returned. Solve this by masking the upper DSCP bits and the ECN bits using IPTOS_RT_MASK. The structure that communicates the request and the response is not exported to user space, so it is unlikely that this netlink family is actually in use [1]. [1] https://lore.kernel.org/netdev/ZpqpB8vJU%2FQ6LSqa@debian/ Signed-off-by: Ido Schimmel Reviewed-by: Guillaume Nault Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 0b54f8e73ba45d03b64726b72ac18cc324142471 Author: Kuniyuki Iwashima Date: Fri Aug 9 16:54:02 2024 -0700 ipv4: Check !in_dev earlier for ioctl(SIOCSIFADDR). [ Upstream commit e3af3d3c5b26c33a7950e34e137584f6056c4319 ] dev->ip_ptr could be NULL if we set an invalid MTU. Even then, if we issue ioctl(SIOCSIFADDR) for a new IPv4 address, devinet_ioctl() allocates struct in_ifaddr and fails later in inet_set_ifa() because in_dev is NULL. Let's move the check earlier. Signed-off-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20240809235406.50187-2-kuniyu@amazon.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 89704e7aaa45ac155fa55a9635b19e50b87895a9 Author: Simon Horman Date: Tue Aug 6 12:28:24 2024 +0100 net: mvpp2: Increase size of queue_name buffer [ Upstream commit 91d516d4de48532d967a77967834e00c8c53dfe6 ] Increase size of queue_name buffer from 30 to 31 to accommodate the largest string written to it. This avoids truncation in the possibly unlikely case where the string is name is the maximum size. Flagged by gcc-14: .../mvpp2_main.c: In function 'mvpp2_probe': .../mvpp2_main.c:7636:32: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=] 7636 | "stats-wq-%s%s", netdev_name(priv->port_list[0]->dev), | ^ .../mvpp2_main.c:7635:9: note: 'snprintf' output between 10 and 31 bytes into a destination of size 30 7635 | snprintf(priv->queue_name, sizeof(priv->queue_name), | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 7636 | "stats-wq-%s%s", netdev_name(priv->port_list[0]->dev), | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 7637 | priv->port_count > 1 ? "+" : ""); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Introduced by commit 118d6298f6f0 ("net: mvpp2: add ethtool GOP statistics"). I am not flagging this as a bug as I am not aware that it is one. Compile tested only. Signed-off-by: Simon Horman Reviewed-by: Marcin Wojtas Link: https://patch.msgid.link/20240806-mvpp2-namelen-v1-1-6dc773653f2f@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit c79768ffba5b6e95569a463a69b3101c95694867 Author: Simon Horman Date: Thu Aug 1 19:35:37 2024 +0100 tipc: guard against string buffer overrun [ Upstream commit 6555a2a9212be6983d2319d65276484f7c5f431a ] Smatch reports that copying media_name and if_name to name_parts may overwrite the destination. .../bearer.c:166 bearer_name_validate() error: strcpy() 'media_name' too large for 'name_parts->media_name' (32 vs 16) .../bearer.c:167 bearer_name_validate() error: strcpy() 'if_name' too large for 'name_parts->if_name' (1010102 vs 16) This does seem to be the case so guard against this possibility by using strscpy() and failing if truncation occurs. Introduced by commit b97bf3fd8f6a ("[TIPC] Initial merge") Compile tested only. Reviewed-by: Jakub Kicinski Signed-off-by: Simon Horman Link: https://patch.msgid.link/20240801-tipic-overrun-v2-1-c5b869d1f074@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 402b4c6b7500c7cca6972d2456a4a422801035b5 Author: Pei Xiao Date: Thu Jul 18 14:05:48 2024 +0800 ACPICA: check null return of ACPI_ALLOCATE_ZEROED() in acpi_db_convert_to_package() [ Upstream commit a5242874488eba2b9062985bf13743c029821330 ] ACPICA commit 4d4547cf13cca820ff7e0f859ba83e1a610b9fd0 ACPI_ALLOCATE_ZEROED() may fail, elements might be NULL and will cause NULL pointer dereference later. Link: https://github.com/acpica/acpica/commit/4d4547cf Signed-off-by: Pei Xiao Link: https://patch.msgid.link/tencent_4A21A2865B8B0A0D12CAEBEB84708EDDB505@qq.com [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit bcb4a23f035dfec2c3a97153b8985da6e162daa3 Author: Rafael J. Wysocki Date: Thu Jul 4 18:26:54 2024 +0200 ACPI: EC: Do not release locks during operation region accesses [ Upstream commit dc171114926ec390ab90f46534545420ec03e458 ] It is not particularly useful to release locks (the EC mutex and the ACPI global lock, if present) and re-acquire them immediately thereafter during EC address space accesses in acpi_ec_space_handler(). First, releasing them for a while before grabbing them again does not really help anyone because there may not be enough time for another thread to acquire them. Second, if another thread successfully acquires them and carries out a new EC write or read in the middle if an operation region access in progress, it may confuse the EC firmware, especially after the burst mode has been enabled. Finally, manipulating the locks after writing or reading every single byte of data is overhead that it is better to avoid. Accordingly, modify the code to carry out EC address space accesses entirely without releasing the locks. Signed-off-by: Rafael J. Wysocki Reviewed-by: Hans de Goede Link: https://patch.msgid.link/12473338.O9o76ZdvQC@rjwysocki.net Signed-off-by: Sasha Levin commit 1bf77d32e41df1e97993dc2f98364be6a9ca5e5c Author: Zong-Zhe Yang Date: Thu Jul 18 15:06:15 2024 +0800 wifi: rtw88: select WANT_DEV_COREDUMP [ Upstream commit 7e989b0c1e33210c07340bf5228aa83ea52515b5 ] We have invoked device coredump when fw crash. Should select WANT_DEV_COREDUMP by ourselves. Signed-off-by: Zong-Zhe Yang Signed-off-by: Ping-Ke Shih Link: https://patch.msgid.link/20240718070616.42217-1-pkshih@realtek.com Signed-off-by: Sasha Levin commit f81b864fe5d2b6a2df0ae0a0aee989ae80348675 Author: Dmitry Antipov Date: Wed Sep 4 14:54:01 2024 +0300 net: sched: consistently use rcu_replace_pointer() in taprio_change() [ Upstream commit d5c4546062fd6f5dbce575c7ea52ad66d1968678 ] According to Vinicius (and carefully looking through the whole https://syzkaller.appspot.com/bug?extid=b65e0af58423fc8a73aa once again), txtime branch of 'taprio_change()' is not going to race against 'advance_sched()'. But using 'rcu_replace_pointer()' in the former may be a good idea as well. Suggested-by: Vinicius Costa Gomes Signed-off-by: Dmitry Antipov Acked-by: Vinicius Costa Gomes Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit f2c2c674cb5ddba59eabd9fababb76636ae7b254 Author: Armin Wolf Date: Sun Apr 14 21:50:33 2024 +0200 ACPICA: Fix memory leak if acpi_ps_get_next_field() fails [ Upstream commit e6169a8ffee8a012badd8c703716e761ce851b15 ] ACPICA commit 1280045754264841b119a5ede96cd005bc09b5a7 If acpi_ps_get_next_field() fails, the previously created field list needs to be properly disposed before returning the status code. Link: https://github.com/acpica/acpica/commit/12800457 Signed-off-by: Armin Wolf [ rjw: Rename local variable to avoid compiler confusion ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit b340de28c2abd8c381cf1331beb7a8b7859198ee Author: Armin Wolf Date: Wed Apr 3 20:50:11 2024 +0200 ACPICA: Fix memory leak if acpi_ps_get_next_namepath() fails [ Upstream commit 5accb265f7a1b23e52b0ec42313d1e12895552f4 ] ACPICA commit 2802af722bbde7bf1a7ac68df68e179e2555d361 If acpi_ps_get_next_namepath() fails, the previously allocated union acpi_parse_object needs to be freed before returning the status code. The issue was first being reported on the Linux ACPI mailing list: Link: https://lore.kernel.org/linux-acpi/56f94776-484f-48c0-8855-dba8e6a7793b@yandex.ru/T/ Link: https://github.com/acpica/acpica/commit/2802af72 Signed-off-by: Armin Wolf Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit 62c0d526c9634792ac102c90656d345e13959a12 Author: Krzysztof Kozlowski Date: Tue Aug 27 16:44:21 2024 +0200 net: hisilicon: hns_mdio: fix OF node leak in probe() [ Upstream commit e62beddc45f487b9969821fad3a0913d9bc18a2f ] Driver is leaking OF node reference from of_parse_phandle_with_fixed_args() in probe(). Signed-off-by: Krzysztof Kozlowski Reviewed-by: Simon Horman Link: https://patch.msgid.link/20240827144421.52852-4-krzysztof.kozlowski@linaro.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 8b8511d5bcd816f5a90253eec3ae5bbcf11aec66 Author: Krzysztof Kozlowski Date: Tue Aug 27 16:44:20 2024 +0200 net: hisilicon: hns_dsaf_mac: fix OF node leak in hns_mac_get_info() [ Upstream commit 5680cf8d34e1552df987e2f4bb1bff0b2a8c8b11 ] Driver is leaking OF node reference from of_parse_phandle_with_fixed_args() in hns_mac_get_info(). Signed-off-by: Krzysztof Kozlowski Reviewed-by: Simon Horman Link: https://patch.msgid.link/20240827144421.52852-3-krzysztof.kozlowski@linaro.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit beb04d5509fcbcaeb8f96bf63d9a9b1c4b7784cc Author: Krzysztof Kozlowski Date: Tue Aug 27 16:44:19 2024 +0200 net: hisilicon: hip04: fix OF node leak in probe() [ Upstream commit 17555297dbd5bccc93a01516117547e26a61caf1 ] Driver is leaking OF node reference from of_parse_phandle_with_fixed_args() in probe(). Signed-off-by: Krzysztof Kozlowski Reviewed-by: Simon Horman Link: https://patch.msgid.link/20240827144421.52852-2-krzysztof.kozlowski@linaro.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit bd51b0e678a6f35bde54a24fb77fc86145138c5e Author: Aleksandr Mishin Date: Wed Jul 10 15:39:49 2024 +0300 ice: Adjust over allocation of memory in ice_sched_add_root_node() and ice_sched_add_node() [ Upstream commit 62fdaf9e8056e9a9e6fe63aa9c816ec2122d60c6 ] In ice_sched_add_root_node() and ice_sched_add_node() there are calls to devm_kcalloc() in order to allocate memory for array of pointers to 'ice_sched_node' structure. But incorrect types are used as sizeof() arguments in these calls (structures instead of pointers) which leads to over allocation of memory. Adjust over allocation of memory by correcting types in devm_kcalloc() sizeof() arguments. Found by Linux Verification Center (linuxtesting.org) with SVACE. Reviewed-by: Przemek Kitszel Signed-off-by: Aleksandr Mishin Reviewed-by: Simon Horman Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin commit d1f2fbc6a769081503f6ffedbb5cd1ac497f0e77 Author: Toke Høiland-Jørgensen Date: Mon Aug 12 16:24:46 2024 +0200 wifi: ath9k_htc: Use __skb_set_length() for resetting urb before resubmit [ Upstream commit 94745807f3ebd379f23865e6dab196f220664179 ] Syzbot points out that skb_trim() has a sanity check on the existing length of the skb, which can be uninitialised in some error paths. The intent here is clearly just to reset the length to zero before resubmitting, so switch to calling __skb_set_length(skb, 0) directly. In addition, __skb_set_length() already contains a call to skb_reset_tail_pointer(), so remove the redundant call. The syzbot report came from ath9k_hif_usb_reg_in_cb(), but there's a similar usage of skb_trim() in ath9k_hif_usb_rx_cb(), change both while we're at it. Reported-by: syzbot+98afa303be379af6cdb2@syzkaller.appspotmail.com Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: Kalle Valo Link: https://patch.msgid.link/20240812142447.12328-1-toke@toke.dk Signed-off-by: Sasha Levin commit d96512bfeee51ff4f50768c085b235012791cf5d Author: Dmitry Kandybka Date: Thu Jul 25 14:17:43 2024 +0300 wifi: ath9k: fix possible integer overflow in ath9k_get_et_stats() [ Upstream commit 3f66f26703093886db81f0610b97a6794511917c ] In 'ath9k_get_et_stats()', promote TX stats counters to 'u64' to avoid possible integer overflow. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Dmitry Kandybka Acked-by: Toke Høiland-Jørgensen Signed-off-by: Kalle Valo Link: https://patch.msgid.link/20240725111743.14422-1-d.kandybka@gmail.com Signed-off-by: Sasha Levin commit 4ce87674c3a6b4d3b3d45f85b584ab8618a3cece Author: Jann Horn Date: Fri Oct 4 19:37:10 2024 +0000 f2fs: Require FMODE_WRITE for atomic write ioctls commit 4f5a100f87f32cb65d4bb1ad282a08c92f6f591e upstream. The F2FS ioctls for starting and committing atomic writes check for inode_owner_or_capable(), but this does not give LSMs like SELinux or Landlock an opportunity to deny the write access - if the caller's FSUID matches the inode's UID, inode_owner_or_capable() immediately returns true. There are scenarios where LSMs want to deny a process the ability to write particular files, even files that the FSUID of the process owns; but this can currently partially be bypassed using atomic write ioctls in two ways: - F2FS_IOC_START_ATOMIC_REPLACE + F2FS_IOC_COMMIT_ATOMIC_WRITE can truncate an inode to size 0 - F2FS_IOC_START_ATOMIC_WRITE + F2FS_IOC_ABORT_ATOMIC_WRITE can revert changes another process concurrently made to a file Fix it by requiring FMODE_WRITE for these operations, just like for F2FS_IOC_MOVE_RANGE. Since any legitimate caller should only be using these ioctls when intending to write into the file, that seems unlikely to break anything. Fixes: 88b88a667971 ("f2fs: support atomic writes") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn Reviewed-by: Chao Yu Reviewed-by: Eric Biggers Signed-off-by: Jaegeuk Kim Signed-off-by: Eric Biggers Signed-off-by: Sasha Levin commit 9213d0b6a1db09715f14d3199f76755620b9ee7b Author: Takashi Iwai Date: Fri Oct 4 10:25:58 2024 +0200 ALSA: hda/conexant: Fix conflicting quirk for System76 Pangolin [ Upstream commit b3ebb007060f89d5a45c9b99f06a55e36a1945b5 ] We received a regression report for System76 Pangolin (pang14) due to the recent fix for Tuxedo Sirius devices to support the top speaker. The reason was the conflicting PCI SSID, as often seen. As a workaround, now the codec SSID is checked and the quirk is applied conditionally only to Sirius devices. Fixes: 4178d78cd7a8 ("ALSA: hda/conexant: Add pincfg quirk to enable top speakers on Sirius devices") Reported-by: Christian Heusel Reported-by: Jerry Closes: https://lore.kernel.org/c930b6a6-64e5-498f-b65a-1cd5e0a1d733@heusel.eu Link: https://patch.msgid.link/20241004082602.29016-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit ec7b2b0a3b64b77670c0d208d24bd930be770016 Author: Takashi Iwai Date: Tue Oct 1 14:14:36 2024 +0200 ALSA: hda/generic: Unconditionally prefer preferred_dacs pairs [ Upstream commit 1c801e7f77445bc56e5e1fec6191fd4503534787 ] Some time ago, we introduced the obey_preferred_dacs flag for choosing the DAC/pin pairs specified by the driver instead of parsing the paths. This works as expected, per se, but there have been a few cases where we forgot to set this flag while preferred_dacs table is already set up. It ended up with incorrect wiring and made us wondering why it doesn't work. Basically, when the preferred_dacs table is provided, it means that the driver really wants to wire up to follow that. That is, the presence of the preferred_dacs table itself is already a "do-it" flag. In this patch, we simply replace the evaluation of obey_preferred_dacs flag with the presence of preferred_dacs table for fixing the misbehavior. Another patch to drop of the obsoleted flag will follow. Fixes: 242d990c158d ("ALSA: hda/generic: Add option to enforce preferred_dacs pairs") Link: https://bugzilla.suse.com/show_bug.cgi?id=1219803 Link: https://patch.msgid.link/20241001121439.26060-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit f30b5295e8a259d1350d7be4b5329f4874798432 Author: Oder Chiou Date: Mon Sep 30 18:50:39 2024 +0800 ALSA: hda/realtek: Fix the push button function for the ALC257 [ Upstream commit 05df9732a0894846c46d0062d4af535c5002799d ] The headset push button cannot work properly in case of the ALC257. This patch reverted the previous commit to correct the side effect. Fixes: ef9718b3d54e ("ALSA: hda/realtek: Fix noise from speakers on Lenovo IdeaPad 3 15IAU7") Signed-off-by: Oder Chiou Link: https://patch.msgid.link/20240930105039.3473266-1-oder_chiou@realtek.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 0e4e2e60556c6ed00e8450b720f106a268d23062 Author: Xin Long Date: Mon Sep 30 16:49:51 2024 -0400 sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start [ Upstream commit 8beee4d8dee76b67c75dc91fd8185d91e845c160 ] In sctp_listen_start() invoked by sctp_inet_listen(), it should set the sk_state back to CLOSED if sctp_autobind() fails due to whatever reason. Otherwise, next time when calling sctp_inet_listen(), if sctp_sk(sk)->reuse is already set via setsockopt(SCTP_REUSE_PORT), sctp_sk(sk)->bind_hash will be dereferenced as sk_state is LISTENING, which causes a crash as bind_hash is NULL. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:sctp_inet_listen+0x7f0/0xa20 net/sctp/socket.c:8617 Call Trace: __sys_listen_socket net/socket.c:1883 [inline] __sys_listen+0x1b7/0x230 net/socket.c:1894 __do_sys_listen net/socket.c:1902 [inline] Fixes: 5e8f3f703ae4 ("sctp: simplify sctp listening code") Reported-by: syzbot+f4e0f821e3a3b7cee51d@syzkaller.appspotmail.com Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Link: https://patch.msgid.link/a93e655b3c153dc8945d7a812e6d8ab0d52b7aa0.1727729391.git.lucien.xin@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 5ac448133e22760266a5bea87868b15cbddeddf4 Author: Anton Danilov Date: Wed Sep 25 02:51:59 2024 +0300 ipv4: ip_gre: Fix drops of small packets in ipgre_xmit [ Upstream commit c4a14f6d9d17ad1e41a36182dd3b8a5fd91efbd7 ] Regression Description: Depending on the options specified for the GRE tunnel device, small packets may be dropped. This occurs because the pskb_network_may_pull function fails due to the packet's insufficient length. For example, if only the okey option is specified for the tunnel device, original (before encapsulation) packets smaller than 28 bytes (including the IPv4 header) will be dropped. This happens because the required length is calculated relative to the network header, not the skb->head. Here is how the required length is computed and checked: * The pull_len variable is set to 28 bytes, consisting of: * IPv4 header: 20 bytes * GRE header with Key field: 8 bytes * The pskb_network_may_pull function adds the network offset, shifting the checkable space further to the beginning of the network header and extending it to the beginning of the packet. As a result, the end of the checkable space occurs beyond the actual end of the packet. Instead of ensuring that 28 bytes are present in skb->head, the function is requesting these 28 bytes starting from the network header. For small packets, this requested length exceeds the actual packet size, causing the check to fail and the packets to be dropped. This issue affects both locally originated and forwarded packets in DMVPN-like setups. How to reproduce (for local originated packets): ip link add dev gre1 type gre ikey 1.9.8.4 okey 1.9.8.4 \ local remote 0.0.0.0 ip link set mtu 1400 dev gre1 ip link set up dev gre1 ip address add 192.168.13.1/24 dev gre1 ip neighbor add 192.168.13.2 lladdr dev gre1 ping -s 1374 -c 10 192.168.13.2 tcpdump -vni gre1 tcpdump -vni 'ip proto 47' ip -s -s -d link show dev gre1 Solution: Use the pskb_may_pull function instead the pskb_network_may_pull. Fixes: 80d875cfc9d3 ("ipv4: ip_gre: Avoid skb_pull() failure in ipgre_xmit()") Signed-off-by: Anton Danilov Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20240924235158.106062-1-littlesmilingcloud@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 473426a1d53a68dd1e718e6cd00d57936993fa6c Author: Eric Dumazet Date: Tue Sep 24 15:02:57 2024 +0000 net: add more sanity checks to qdisc_pkt_len_init() [ Upstream commit ab9a9a9e9647392a19e7a885b08000e89c86b535 ] One path takes care of SKB_GSO_DODGY, assuming skb->len is bigger than hdr_len. virtio_net_hdr_to_skb() does not fully dissect TCP headers, it only make sure it is at least 20 bytes. It is possible for an user to provide a malicious 'GSO' packet, total length of 80 bytes. - 20 bytes of IPv4 header - 60 bytes TCP header - a small gso_size like 8 virtio_net_hdr_to_skb() would declare this packet as a normal GSO packet, because it would see 40 bytes of payload, bigger than gso_size. We need to make detect this case to not underflow qdisc_skb_cb(skb)->pkt_len. Fixes: 1def9238d4aa ("net_sched: more precise pkt_len computation") Signed-off-by: Eric Dumazet Reviewed-by: Willem de Bruijn Reviewed-by: David Ahern Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 1598d70ad9c7d0a4d9d54b82094e9f45908fda6d Author: Eric Dumazet Date: Tue Sep 24 15:02:56 2024 +0000 net: avoid potential underflow in qdisc_pkt_len_init() with UFO [ Upstream commit c20029db28399ecc50e556964eaba75c43b1e2f1 ] After commit 7c6d2ecbda83 ("net: be more gentle about silly gso requests coming from user") virtio_net_hdr_to_skb() had sanity check to detect malicious attempts from user space to cook a bad GSO packet. Then commit cf9acc90c80ec ("net: virtio_net_hdr_to_skb: count transport header in UFO") while fixing one issue, allowed user space to cook a GSO packet with the following characteristic : IPv4 SKB_GSO_UDP, gso_size=3, skb->len = 28. When this packet arrives in qdisc_pkt_len_init(), we end up with hdr_len = 28 (IPv4 header + UDP header), matching skb->len Then the following sets gso_segs to 0 : gso_segs = DIV_ROUND_UP(skb->len - hdr_len, shinfo->gso_size); Then later we set qdisc_skb_cb(skb)->pkt_len to back to zero :/ qdisc_skb_cb(skb)->pkt_len += (gso_segs - 1) * hdr_len; This leads to the following crash in fq_codel [1] qdisc_pkt_len_init() is best effort, we only want an estimation of the bytes sent on the wire, not crashing the kernel. This patch is fixing this particular issue, a following one adds more sanity checks for another potential bug. [1] [ 70.724101] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 70.724561] #PF: supervisor read access in kernel mode [ 70.724561] #PF: error_code(0x0000) - not-present page [ 70.724561] PGD 10ac61067 P4D 10ac61067 PUD 107ee2067 PMD 0 [ 70.724561] Oops: Oops: 0000 [#1] SMP NOPTI [ 70.724561] CPU: 11 UID: 0 PID: 2163 Comm: b358537762 Not tainted 6.11.0-virtme #991 [ 70.724561] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 70.724561] RIP: 0010:fq_codel_enqueue (net/sched/sch_fq_codel.c:120 net/sched/sch_fq_codel.c:168 net/sched/sch_fq_codel.c:230) sch_fq_codel [ 70.724561] Code: 24 08 49 c1 e1 06 44 89 7c 24 18 45 31 ed 45 31 c0 31 ff 89 44 24 14 4c 03 8b 90 01 00 00 eb 04 39 ca 73 37 4d 8b 39 83 c7 01 <49> 8b 17 49 89 11 41 8b 57 28 45 8b 5f 34 49 c7 07 00 00 00 00 49 All code ======== 0: 24 08 and $0x8,%al 2: 49 c1 e1 06 shl $0x6,%r9 6: 44 89 7c 24 18 mov %r15d,0x18(%rsp) b: 45 31 ed xor %r13d,%r13d e: 45 31 c0 xor %r8d,%r8d 11: 31 ff xor %edi,%edi 13: 89 44 24 14 mov %eax,0x14(%rsp) 17: 4c 03 8b 90 01 00 00 add 0x190(%rbx),%r9 1e: eb 04 jmp 0x24 20: 39 ca cmp %ecx,%edx 22: 73 37 jae 0x5b 24: 4d 8b 39 mov (%r9),%r15 27: 83 c7 01 add $0x1,%edi 2a:* 49 8b 17 mov (%r15),%rdx <-- trapping instruction 2d: 49 89 11 mov %rdx,(%r9) 30: 41 8b 57 28 mov 0x28(%r15),%edx 34: 45 8b 5f 34 mov 0x34(%r15),%r11d 38: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 3f: 49 rex.WB Code starting with the faulting instruction =========================================== 0: 49 8b 17 mov (%r15),%rdx 3: 49 89 11 mov %rdx,(%r9) 6: 41 8b 57 28 mov 0x28(%r15),%edx a: 45 8b 5f 34 mov 0x34(%r15),%r11d e: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 15: 49 rex.WB [ 70.724561] RSP: 0018:ffff95ae85e6fb90 EFLAGS: 00000202 [ 70.724561] RAX: 0000000002000000 RBX: ffff95ae841de000 RCX: 0000000000000000 [ 70.724561] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 [ 70.724561] RBP: ffff95ae85e6fbf8 R08: 0000000000000000 R09: ffff95b710a30000 [ 70.724561] R10: 0000000000000000 R11: bdf289445ce31881 R12: ffff95ae85e6fc58 [ 70.724561] R13: 0000000000000000 R14: 0000000000000040 R15: 0000000000000000 [ 70.724561] FS: 000000002c5c1380(0000) GS:ffff95bd7fcc0000(0000) knlGS:0000000000000000 [ 70.724561] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 70.724561] CR2: 0000000000000000 CR3: 000000010c568000 CR4: 00000000000006f0 [ 70.724561] Call Trace: [ 70.724561] [ 70.724561] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434) [ 70.724561] ? page_fault_oops (arch/x86/mm/fault.c:715) [ 70.724561] ? exc_page_fault (./arch/x86/include/asm/irqflags.h:26 ./arch/x86/include/asm/irqflags.h:87 ./arch/x86/include/asm/irqflags.h:147 arch/x86/mm/fault.c:1489 arch/x86/mm/fault.c:1539) [ 70.724561] ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623) [ 70.724561] ? fq_codel_enqueue (net/sched/sch_fq_codel.c:120 net/sched/sch_fq_codel.c:168 net/sched/sch_fq_codel.c:230) sch_fq_codel [ 70.724561] dev_qdisc_enqueue (net/core/dev.c:3784) [ 70.724561] __dev_queue_xmit (net/core/dev.c:3880 (discriminator 2) net/core/dev.c:4390 (discriminator 2)) [ 70.724561] ? irqentry_enter (kernel/entry/common.c:237) [ 70.724561] ? sysvec_apic_timer_interrupt (./arch/x86/include/asm/hardirq.h:74 (discriminator 2) arch/x86/kernel/apic/apic.c:1043 (discriminator 2) arch/x86/kernel/apic/apic.c:1043 (discriminator 2)) [ 70.724561] ? trace_hardirqs_on (kernel/trace/trace_preemptirq.c:58 (discriminator 4)) [ 70.724561] ? asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:702) [ 70.724561] ? virtio_net_hdr_to_skb.constprop.0 (./include/linux/virtio_net.h:129 (discriminator 1)) [ 70.724561] packet_sendmsg (net/packet/af_packet.c:3145 (discriminator 1) net/packet/af_packet.c:3177 (discriminator 1)) [ 70.724561] ? _raw_spin_lock_bh (./arch/x86/include/asm/atomic.h:107 (discriminator 4) ./include/linux/atomic/atomic-arch-fallback.h:2170 (discriminator 4) ./include/linux/atomic/atomic-instrumented.h:1302 (discriminator 4) ./include/asm-generic/qspinlock.h:111 (discriminator 4) ./include/linux/spinlock.h:187 (discriminator 4) ./include/linux/spinlock_api_smp.h:127 (discriminator 4) kernel/locking/spinlock.c:178 (discriminator 4)) [ 70.724561] ? netdev_name_node_lookup_rcu (net/core/dev.c:325 (discriminator 1)) [ 70.724561] __sys_sendto (net/socket.c:730 (discriminator 1) net/socket.c:745 (discriminator 1) net/socket.c:2210 (discriminator 1)) [ 70.724561] ? __sys_setsockopt (./include/linux/file.h:34 net/socket.c:2355) [ 70.724561] __x64_sys_sendto (net/socket.c:2222 (discriminator 1) net/socket.c:2218 (discriminator 1) net/socket.c:2218 (discriminator 1)) [ 70.724561] do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) [ 70.724561] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) [ 70.724561] RIP: 0033:0x41ae09 Fixes: cf9acc90c80ec ("net: virtio_net_hdr_to_skb: count transport header in UFO") Reported-by: syzbot Signed-off-by: Eric Dumazet Cc: Jonathan Davies Reviewed-by: Willem de Bruijn Reviewed-by: Jonathan Davies Reviewed-by: David Ahern Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 60c068444c20bf9a3e22b65b5f6f3d9edc852931 Author: Aleksander Jan Bajkowski Date: Mon Sep 23 23:49:49 2024 +0200 net: ethernet: lantiq_etop: fix memory disclosure [ Upstream commit 45c0de18ff2dc9af01236380404bbd6a46502c69 ] When applying padding, the buffer is not zeroed, which results in memory disclosure. The mentioned data is observed on the wire. This patch uses skb_put_padto() to pad Ethernet frames properly. The mentioned function zeroes the expanded buffer. In case the packet cannot be padded it is silently dropped. Statistics are also not incremented. This driver does not support statistics in the old 32-bit format or the new 64-bit format. These will be added in the future. In its current form, the patch should be easily backported to stable versions. Ethernet MACs on Amazon-SE and Danube cannot do padding of the packets in hardware, so software padding must be applied. Fixes: 504d4721ee8e ("MIPS: Lantiq: Add ethernet driver") Signed-off-by: Aleksander Jan Bajkowski Reviewed-by: Jacob Keller Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/20240923214949.231511-2-olek2@wp.pl Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit efd9ff49d9c984aa7a8d0154d80ae5638df2cc24 Author: Jinjie Ruan Date: Thu Sep 12 11:12:04 2024 +0800 Bluetooth: btmrvl: Use IRQF_NO_AUTOEN flag in request_irq() [ Upstream commit 7b1ab460592ca818e7b52f27cd3ec86af79220d1 ] disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ. Fixes: bb7f4f0bcee6 ("btmrvl: add platform specific wakeup interrupt support") Signed-off-by: Jinjie Ruan Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit 8f390b9eed9452ad41e56cf0b790fbfa08892794 Author: Abhishek Pandit-Subedi Date: Wed Jun 10 18:53:55 2020 -0700 Bluetooth: btmrvl_sdio: Refactor irq wakeup [ Upstream commit e660b3510eb4b3c06ce1188a1d305b6f653106fc ] Use device_init_wakeup to allow the Bluetooth dev to wake the system from suspend. Currently, the device can wake the system but no power/wakeup entry is created in sysfs to allow userspace to disable wakeup. Signed-off-by: Abhishek Pandit-Subedi Reviewed-by: Douglas Anderson Signed-off-by: Marcel Holtmann Stable-dep-of: 7b1ab460592c ("Bluetooth: btmrvl: Use IRQF_NO_AUTOEN flag in request_irq()") Signed-off-by: Sasha Levin commit c0add6ed2cf1c4733cd489efc61faeccd3433b41 Author: Eric Dumazet Date: Thu Sep 26 18:56:11 2024 +0000 netfilter: nf_tables: prevent nf_skb_duplicated corruption [ Upstream commit 92ceba94de6fb4cee2bf40b485979c342f44a492 ] syzbot found that nf_dup_ipv4() or nf_dup_ipv6() could write per-cpu variable nf_skb_duplicated in an unsafe way [1]. Disabling preemption as hinted by the splat is not enough, we have to disable soft interrupts as well. [1] BUG: using __this_cpu_write() in preemptible [00000000] code: syz.4.282/6316 caller is nf_dup_ipv4+0x651/0x8f0 net/ipv4/netfilter/nf_dup_ipv4.c:87 CPU: 0 UID: 0 PID: 6316 Comm: syz.4.282 Not tainted 6.11.0-rc7-syzkaller-00104-g7052622fccb1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 check_preemption_disabled+0x10e/0x120 lib/smp_processor_id.c:49 nf_dup_ipv4+0x651/0x8f0 net/ipv4/netfilter/nf_dup_ipv4.c:87 nft_dup_ipv4_eval+0x1db/0x300 net/ipv4/netfilter/nft_dup_ipv4.c:30 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x4ad/0x1da0 net/netfilter/nf_tables_core.c:288 nft_do_chain_ipv4+0x202/0x320 net/netfilter/nft_chain_filter.c:23 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook+0x2c4/0x450 include/linux/netfilter.h:269 NF_HOOK_COND include/linux/netfilter.h:302 [inline] ip_output+0x185/0x230 net/ipv4/ip_output.c:433 ip_local_out net/ipv4/ip_output.c:129 [inline] ip_send_skb+0x74/0x100 net/ipv4/ip_output.c:1495 udp_send_skb+0xacf/0x1650 net/ipv4/udp.c:981 udp_sendmsg+0x1c21/0x2a60 net/ipv4/udp.c:1269 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmmsg+0x3b2/0x740 net/socket.c:2737 __do_sys_sendmmsg net/socket.c:2766 [inline] __se_sys_sendmmsg net/socket.c:2763 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2763 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f4ce4f7def9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f4ce5d4a038 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00007f4ce5135f80 RCX: 00007f4ce4f7def9 RDX: 0000000000000001 RSI: 0000000020005d40 RDI: 0000000000000006 RBP: 00007f4ce4ff0b76 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f4ce5135f80 R15: 00007ffd4cbc6d68 Fixes: d877f07112f1 ("netfilter: nf_tables: add nft_dup expression") Reported-by: syzbot Signed-off-by: Eric Dumazet Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 83b0b227a90b367f4dab9969427681e0dded2db8 Author: Jinjie Ruan Date: Wed Sep 11 17:42:34 2024 +0800 net: ieee802154: mcr20a: Use IRQF_NO_AUTOEN flag in request_irq() [ Upstream commit 09573b1cc76e7ff8f056ab29ea1cdc152ec8c653 ] disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ. Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver") Reviewed-by: Miquel Raynal Signed-off-by: Jinjie Ruan Link: https://lore.kernel.org/20240911094234.1922418-1-ruanjinjie@huawei.com Signed-off-by: Stefan Schmidt Signed-off-by: Sasha Levin commit 4b16abbc2b12c1bf326f21b38431d125aaab4291 Author: Phil Sutter Date: Wed Sep 25 20:01:20 2024 +0200 netfilter: uapi: NFTA_FLOWTABLE_HOOK is NLA_NESTED [ Upstream commit 76f1ed087b562a469f2153076f179854b749c09a ] Fix the comment which incorrectly defines it as NLA_U32. Fixes: 3b49e2e94e6e ("netfilter: nf_tables: add flow table netlink frontend") Signed-off-by: Phil Sutter Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 409105f06e378bf20520f2bed9fea865b0822c7f Author: Mohamed Khalfella Date: Wed Sep 4 22:02:48 2024 -0600 net/mlx5: Added cond_resched() to crdump collection [ Upstream commit ec793155894140df7421d25903de2e6bc12c695b ] Collecting crdump involves reading vsc registers from pci config space of mlx device, which can take long time to complete. This might result in starving other threads waiting to run on the cpu. Numbers I got from testing ConnectX-5 Ex MCX516A-CDAT in the lab: - mlx5_vsc_gw_read_block_fast() was called with length = 1310716. - mlx5_vsc_gw_read_fast() reads 4 bytes at a time. It was not used to read the entire 1310716 bytes. It was called 53813 times because there are jumps in read_addr. - On average mlx5_vsc_gw_read_fast() took 35284.4ns. - In total mlx5_vsc_wait_on_flag() called vsc_read() 54707 times. The average time for each call was 17548.3ns. In some instances vsc_read() was called more than one time when the flag was not set. As expected the thread released the cpu after 16 iterations in mlx5_vsc_wait_on_flag(). - Total time to read crdump was 35284.4ns * 53813 ~= 1.898s. It was seen in the field that crdump can take more than 5 seconds to complete. During that time mlx5_vsc_wait_on_flag() did not release the cpu because it did not complete 16 iterations. It is believed that pci config reads were slow. Adding cond_resched() every 128 register read improves the situation. In the common case the, crdump takes ~1.8989s, the thread yields the cpu every ~4.51ms. If crdump takes ~5s, the thread yields the cpu every ~18.0ms. Fixes: 8b9d8baae1de ("net/mlx5: Add Crdump support") Reviewed-by: Yuanyuan Zhong Signed-off-by: Mohamed Khalfella Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed Signed-off-by: Sasha Levin commit e61e5731a534964832f1d1c89085364a58bf9709 Author: Jinjie Ruan Date: Mon Sep 9 21:17:40 2024 +0800 ieee802154: Fix build error [ Upstream commit addf89774e48c992316449ffab4f29c2309ebefb ] If REGMAP_SPI is m and IEEE802154_MCR20A is y, mcr20a.c:(.text+0x3ed6c5b): undefined reference to `__devm_regmap_init_spi' ld: mcr20a.c:(.text+0x3ed6cb5): undefined reference to `__devm_regmap_init_spi' Select REGMAP_SPI for IEEE802154_MCR20A to fix it. Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver") Signed-off-by: Jinjie Ruan Link: https://lore.kernel.org/20240909131740.1296608-1-ruanjinjie@huawei.com Signed-off-by: Stefan Schmidt Signed-off-by: Sasha Levin commit 97157519350d723ef8f190011e3102b240387565 Author: Krzysztof Kozlowski Date: Thu Nov 21 21:28:28 2019 +0800 drivers: net: Fix Kconfig indentation, continued [ Upstream commit 5421cf84af69a94ebb179fec252f3772c4681cca ] Adjust indentation from spaces to tab (+optional two spaces) as in coding style. This fixes various indentation mixups (seven spaces, tab+one space, etc). Signed-off-by: Krzysztof Kozlowski Signed-off-by: David S. Miller Stable-dep-of: addf89774e48 ("ieee802154: Fix build error") Signed-off-by: Sasha Levin commit a720ee9ce13c5f8a090f5b28935399b7eec4ce76 Author: rd.dunlab@gmail.com Date: Tue Oct 1 16:04:01 2019 -0700 Minor fixes to the CAIF Transport drivers Kconfig file [ Upstream commit 0f04f8ea62ce79f5a8bb1a7c2d92513799532239 ] Minor fixes to the CAIF Transport drivers Kconfig file: - end sentence with period - capitalize CAIF acronym Signed-off-by: Randy Dunlap Cc: Randy Dunlap Signed-off-by: David S. Miller Stable-dep-of: addf89774e48 ("ieee802154: Fix build error") Signed-off-by: Sasha Levin commit 126b567a2ef65fc38a71d832bf1216c56816f231 Author: Xiubo Li Date: Thu Sep 5 06:22:18 2024 +0800 ceph: remove the incorrect Fw reference check when dirtying pages [ Upstream commit c08dfb1b49492c09cf13838c71897493ea3b424e ] When doing the direct-io reads it will also try to mark pages dirty, but for the read path it won't hold the Fw caps and there is case will it get the Fw reference. Fixes: 5dda377cf0a6 ("ceph: set i_head_snapc when getting CEPH_CAP_FILE_WR reference") Signed-off-by: Xiubo Li Reviewed-by: Patrick Donnelly Signed-off-by: Ilya Dryomov Signed-off-by: Sasha Levin commit b0de20de29b13950493a36bd4cf531200eb0e807 Author: Stefan Wahren Date: Wed Aug 21 23:40:44 2024 +0200 mailbox: bcm2835: Fix timeout during suspend mode [ Upstream commit dc09f007caed3b2f6a3b6bd7e13777557ae22bfd ] During noirq suspend phase the Raspberry Pi power driver suffer of firmware property timeouts. The reason is that the IRQ of the underlying BCM2835 mailbox is disabled and rpi_firmware_property_list() will always run into a timeout [1]. Since the VideoCore side isn't consider as a wakeup source, set the IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled during suspend-resume cycle. [1] PM: late suspend of devices complete after 1.754 msecs WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128 rpi_firmware_property_list+0x204/0x22c Firmware transaction 0x00028001 timeout Modules linked in: CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty #17 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0x88/0xec __warn from warn_slowpath_fmt+0x7c/0xb0 warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0 rpi_firmware_set_power from _genpd_power_off+0xe4/0x148 _genpd_power_off from genpd_sync_power_off+0x7c/0x11c genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0 genpd_finish_suspend from dpm_run_callback+0x78/0xd0 dpm_run_callback from device_suspend_noirq+0xc0/0x238 device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168 dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac suspend_devices_and_enter from pm_suspend+0x254/0x2e4 pm_suspend from state_store+0xa8/0xd4 state_store from kernfs_fop_write_iter+0x154/0x1a0 kernfs_fop_write_iter from vfs_write+0x12c/0x184 vfs_write from ksys_write+0x78/0xc0 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xcc93dfa8 to 0xcc93dff0) [...] PM: noirq suspend of devices complete after 3095.584 msecs Link: https://github.com/raspberrypi/firmware/issues/1894 Fixes: 0bae6af6d704 ("mailbox: Enable BCM2835 mailbox support") Signed-off-by: Stefan Wahren Reviewed-by: Florian Fainelli Signed-off-by: Jassi Brar Signed-off-by: Sasha Levin commit 07975f7bc5f57d8ac28825fdb6d886b97be7363e Author: Liao Chen Date: Wed Aug 14 02:51:47 2024 +0000 mailbox: rockchip: fix a typo in module autoloading [ Upstream commit e92d87c9c5d769e4cb1dd7c90faa38dddd7e52e3 ] MODULE_DEVICE_TABLE(of, rockchip_mbox_of_match) could let the module properly autoloaded based on the alias from of_device_id table. It should be 'rockchip_mbox_of_match' instead of 'rockchp_mbox_of_match', just fix it. Fixes: f70ed3b5dc8b ("mailbox: rockchip: Add Rockchip mailbox driver") Signed-off-by: Liao Chen Reviewed-by: Heiko Stuebner Signed-off-by: Jassi Brar Signed-off-by: Sasha Levin commit 37480a590dac423a9669d361bced913b964fe0dc Author: Harshit Mogalapalli Date: Mon Dec 18 22:36:35 2023 -0800 usb: yurex: Fix inconsistent locking bug in yurex_read() commit e7d3b9f28654dbfce7e09f8028210489adaf6a33 upstream. Unlock before returning on the error path. Fixes: 86b20af11e84 ("usb: yurex: Replace snprintf() with the safer scnprintf() variant") Reported-by: Dan Carpenter Reported-by: kernel test robot Closes: https://lore.kernel.org/r/202312170252.3udgrIcP-lkp@intel.com/ Signed-off-by: Harshit Mogalapalli Link: https://lore.kernel.org/r/20231219063639.450994-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Greg Kroah-Hartman commit 031533b621a379dd6fe97402efed260c033d1c9e Author: Andy Shevchenko Date: Wed Sep 11 18:39:14 2024 +0300 i2c: isch: Add missed 'else' commit 1db4da55070d6a2754efeb3743f5312fc32f5961 upstream. In accordance with the existing comment and code analysis it is quite likely that there is a missed 'else' when adapter times out. Add it. Fixes: 5bc1200852c3 ("i2c: Add Intel SCH SMBus support") Signed-off-by: Andy Shevchenko Cc: # v2.6.27+ Signed-off-by: Andi Shyti Signed-off-by: Greg Kroah-Hartman commit 64af4be29b773d50813812e9393580fc007d44b8 Author: Tommy Huang Date: Wed Sep 11 17:39:51 2024 +0800 i2c: aspeed: Update the stop sw state when the bus recovery occurs commit 93701d3b84ac5f3ea07259d4ced405c53d757985 upstream. When the i2c bus recovery occurs, driver will send i2c stop command in the scl low condition. In this case the sw state will still keep original situation. Under multi-master usage, i2c bus recovery will be called when i2c transfer timeout occurs. Update the stop command calling with aspeed_i2c_do_stop function to update master_state. Fixes: f327c686d3ba ("i2c: aspeed: added driver for Aspeed I2C") Cc: stable@vger.kernel.org # v4.13+ Signed-off-by: Tommy Huang Signed-off-by: Andi Shyti Signed-off-by: Greg Kroah-Hartman commit 6ed7f633da6ddc545fe4353a6b289f6a7ec46f03 Author: David Gow Date: Sat Aug 3 15:46:41 2024 +0800 mm: only enforce minimum stack gap size if it's sensible commit 69b50d4351ed924f29e3d46b159e28f70dfc707f upstream. The generic mmap_base code tries to leave a gap between the top of the stack and the mmap base address, but enforces a minimum gap size (MIN_GAP) of 128MB, which is too large on some setups. In particular, on arm tasks without ADDR_LIMIT_32BIT, the STACK_TOP value is less than 128MB, so it's impossible to fit such a gap in. Only enforce this minimum if MIN_GAP < MAX_GAP, as we'd prefer to honour MAX_GAP, which is defined proportionally, so scales better and always leaves us with both _some_ stack space and some room for mmap. This fixes the usercopy KUnit test suite on 32-bit arm, as it doesn't set any personality flags so gets the default (in this case 26-bit) task size. This test can be run with: ./tools/testing/kunit/kunit.py run --arch arm usercopy --make_options LLVM=1 Link: https://lkml.kernel.org/r/20240803074642.1849623-2-davidgow@google.com Fixes: dba79c3df4a2 ("arm: use generic mmap top-down layout and brk randomization") Signed-off-by: David Gow Reviewed-by: Kees Cook Cc: Alexandre Ghiti Cc: Linus Walleij Cc: Luis Chamberlain Cc: Mark Rutland Cc: Russell King Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 8b8de9986f263645e2ca38c2c6427bece5986d52 Author: Ma Ke Date: Wed Aug 28 21:18:14 2024 +0800 pps: add an error check in parport_attach [ Upstream commit 62c5a01a5711c8e4be8ae7b6f0db663094615d48 ] In parport_attach, the return value of ida_alloc is unchecked, witch leads to the use of an invalid index value. To address this issue, index should be checked. When the index value is abnormal, the device should be freed. Found by code review, compile tested only. Cc: stable@vger.kernel.org Fixes: fb56d97df70e ("pps: client: use new parport device model") Signed-off-by: Ma Ke Acked-by: Rodolfo Giometti Link: https://lore.kernel.org/r/20240828131814.3034338-1-make24@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 76abcdcabcd333d558401d447673afd9896647e1 Author: Christophe JAILLET Date: Sun Apr 14 12:10:17 2024 +0200 pps: remove usage of the deprecated ida_simple_xx() API [ Upstream commit 55dbc5b5174d0e7d1fa397d05aa4cb145e8b887e ] ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). This is less verbose. Link: https://lkml.kernel.org/r/9f681747d446b874952a892491387d79ffe565a9.1713089394.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET Cc: Rodolfo Giometti Cc: Greg Kroah-Hartman Signed-off-by: Andrew Morton Stable-dep-of: 62c5a01a5711 ("pps: add an error check in parport_attach") Signed-off-by: Sasha Levin commit e66c62668220b50bf0b3a10680d27f05cdeb838b Author: Oliver Neukum Date: Thu Sep 12 15:21:22 2024 +0200 USB: misc: yurex: fix race between read and write [ Upstream commit 93907620b308609c72ba4b95b09a6aa2658bb553 ] The write code path touches the bbu member in a non atomic manner without taking the spinlock. Fix it. The bug is as old as the driver. Signed-off-by: Oliver Neukum CC: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240912132126.1034743-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 79038d945bf6e4af26a919eb9301b3e1c61b696b Author: Lee Jones Date: Wed Dec 13 16:42:37 2023 +0000 usb: yurex: Replace snprintf() with the safer scnprintf() variant [ Upstream commit 86b20af11e84c26ae3fde4dcc4f490948e3f8035 ] There is a general misunderstanding amongst engineers that {v}snprintf() returns the length of the data *actually* encoded into the destination array. However, as per the C99 standard {v}snprintf() really returns the length of the data that *would have been* written if there were enough space for it. This misunderstanding has led to buffer-overruns in the past. It's generally considered safer to use the {v}scnprintf() variants in their place (or even sprintf() in simple cases). So let's do that. Whilst we're at it, let's define some magic numbers to increase readability and ease of maintenance. Link: https://lwn.net/Articles/69419/ Link: https://github.com/KSPP/linux/issues/105 Cc: Tomoki Sekiyama Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20231213164246.1021885-9-lee@kernel.org Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 93907620b308 ("USB: misc: yurex: fix race between read and write") Signed-off-by: Sasha Levin commit c37bca2ce7d0228fb9239aad5bbe48a838168275 Author: Krzysztof Kozlowski Date: Sun Aug 25 20:05:24 2024 +0200 soc: versatile: realview: fix soc_dev leak during device remove [ Upstream commit c774f2564c0086c23f5269fd4691f233756bf075 ] If device is unbound, the soc_dev should be unregistered to prevent memory leak. Fixes: a2974c9c1f83 ("soc: add driver for the ARM RealView") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/20240825-soc-dev-fixes-v1-3-ff4b35abed83@linaro.org Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin commit 0f167c145613397dc8b14452d42835cf353f6c11 Author: Krzysztof Kozlowski Date: Sun Aug 25 20:05:23 2024 +0200 soc: versatile: realview: fix memory leak during device remove [ Upstream commit 1c4f26a41f9d052f334f6ae629e01f598ed93508 ] If device is unbound, the memory allocated for soc_dev_attr should be freed to prevent leaks. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/20240825-soc-dev-fixes-v1-2-ff4b35abed83@linaro.org Signed-off-by: Linus Walleij Stable-dep-of: c774f2564c00 ("soc: versatile: realview: fix soc_dev leak during device remove") Signed-off-by: Sasha Levin commit 893e8314063994dfa07d82c82775af56c6e24298 Author: Sean Anderson Date: Fri May 31 12:13:32 2024 -0400 PCI: xilinx-nwl: Fix off-by-one in INTx IRQ handler [ Upstream commit 0199d2f2bd8cd97b310f7ed82a067247d7456029 ] MSGF_LEG_MASK is laid out with INTA in bit 0, INTB in bit 1, INTC in bit 2, and INTD in bit 3. Hardware IRQ numbers start at 0, and we register PCI_NUM_INTX IRQs. So to enable INTA (aka hwirq 0) we should set bit 0. Remove the subtraction of one. This bug would cause INTx interrupts not to be delivered, as enabling INTB would actually enable INTA, and enabling INTA wouldn't enable anything at all. It is likely that this got overlooked for so long since most PCIe hardware uses MSIs. This fixes the following UBSAN error: UBSAN: shift-out-of-bounds in ../drivers/pci/controller/pcie-xilinx-nwl.c:389:11 shift exponent 18446744073709551615 is too large for 32-bit type 'int' CPU: 1 PID: 61 Comm: kworker/u10:1 Not tainted 6.6.20+ #268 Hardware name: xlnx,zynqmp (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace (arch/arm64/kernel/stacktrace.c:235) show_stack (arch/arm64/kernel/stacktrace.c:242) dump_stack_lvl (lib/dump_stack.c:107) dump_stack (lib/dump_stack.c:114) __ubsan_handle_shift_out_of_bounds (lib/ubsan.c:218 lib/ubsan.c:387) nwl_unmask_leg_irq (drivers/pci/controller/pcie-xilinx-nwl.c:389 (discriminator 1)) irq_enable (kernel/irq/internals.h:234 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) __irq_startup (kernel/irq/internals.h:239 kernel/irq/chip.c:180 kernel/irq/chip.c:250) irq_startup (kernel/irq/chip.c:270) __setup_irq (kernel/irq/manage.c:1800) request_threaded_irq (kernel/irq/manage.c:2206) pcie_pme_probe (include/linux/interrupt.h:168 drivers/pci/pcie/pme.c:348) Fixes: 9a181e1093af ("PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts") Link: https://lore.kernel.org/r/20240531161337.864994-3-sean.anderson@linux.dev Signed-off-by: Sean Anderson Signed-off-by: Bjorn Helgaas Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin commit 12350c6062407b8af66c63c18584a90f2afd4c81 Author: Thomas Gleixner Date: Thu Dec 10 20:25:54 2020 +0100 PCI: xilinx-nwl: Use irq_data_get_irq_chip_data() [ Upstream commit e56427068a8d796bb7b8e297f2b6e947380e383f ] Going through a full irq descriptor lookup instead of just using the proper helper function which provides direct access is suboptimal. In fact it _is_ wrong because the chip callback needs to get the chip data which is relevant for the chip while using the irq descriptor variant returns the irq chip data of the top level chip of a hierarchy. It does not matter in this case because the chip is the top level chip, but that doesn't make it more correct. Signed-off-by: Thomas Gleixner Reviewed-by: Rob Herring Cc: Bjorn Helgaas Link: https://lore.kernel.org/r/20201210194044.364211860@linutronix.de Stable-dep-of: 0199d2f2bd8c ("PCI: xilinx-nwl: Fix off-by-one in INTx IRQ handler") Signed-off-by: Sasha Levin commit a33145f494e6cb82f3e018662cc7c4febf271f22 Author: Arseniy Krasnov Date: Wed Sep 11 17:24:25 2024 +0300 ASoC: meson: axg-card: fix 'use-after-free' [ Upstream commit 4f9a71435953f941969a4f017e2357db62d85a86 ] Buffer 'card->dai_link' is reallocated in 'meson_card_reallocate_links()', so move 'pad' pointer initialization after this function when memory is already reallocated. Kasan bug report: ================================================================== BUG: KASAN: slab-use-after-free in axg_card_add_link+0x76c/0x9bc Read of size 8 at addr ffff000000e8b260 by task modprobe/356 CPU: 0 PID: 356 Comm: modprobe Tainted: G O 6.9.12-sdkernel #1 Call trace: dump_backtrace+0x94/0xec show_stack+0x18/0x24 dump_stack_lvl+0x78/0x90 print_report+0xfc/0x5c0 kasan_report+0xb8/0xfc __asan_load8+0x9c/0xb8 axg_card_add_link+0x76c/0x9bc [snd_soc_meson_axg_sound_card] meson_card_probe+0x344/0x3b8 [snd_soc_meson_card_utils] platform_probe+0x8c/0xf4 really_probe+0x110/0x39c __driver_probe_device+0xb8/0x18c driver_probe_device+0x108/0x1d8 __driver_attach+0xd0/0x25c bus_for_each_dev+0xe0/0x154 driver_attach+0x34/0x44 bus_add_driver+0x134/0x294 driver_register+0xa8/0x1e8 __platform_driver_register+0x44/0x54 axg_card_pdrv_init+0x20/0x1000 [snd_soc_meson_axg_sound_card] do_one_initcall+0xdc/0x25c do_init_module+0x10c/0x334 load_module+0x24c4/0x26cc init_module_from_file+0xd4/0x128 __arm64_sys_finit_module+0x1f4/0x41c invoke_syscall+0x60/0x188 el0_svc_common.constprop.0+0x78/0x13c do_el0_svc+0x30/0x40 el0_svc+0x38/0x78 el0t_64_sync_handler+0x100/0x12c el0t_64_sync+0x190/0x194 Fixes: 7864a79f37b5 ("ASoC: meson: add axg sound card support") Cc: Stable@vger.kernel.org Signed-off-by: Arseniy Krasnov Reviewed-by: Jerome Brunet Link: https://patch.msgid.link/20240911142425.598631-1-avkrasnov@salutedevices.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 69f27ade48dab743fdf25fb4ac78369105ca3fab Author: Jerome Brunet Date: Thu Feb 13 16:51:57 2020 +0100 ASoC: meson: axg: extract sound card utils [ Upstream commit aa9c3b7273a58b5d9b2c1161b76b5fc8ea8c159b ] This prepares the addition of the GX SoC family sound card driver. The GX sound card, while slightly different, will be similar to the AXG one. The purpose of this change is to share the utils common to both sound card driver. Signed-off-by: Jerome Brunet Link: https://lore.kernel.org/r/20200213155159.3235792-8-jbrunet@baylibre.com Signed-off-by: Mark Brown Stable-dep-of: 4f9a71435953 ("ASoC: meson: axg-card: fix 'use-after-free'") Signed-off-by: Sasha Levin commit ba1cd08eb0fcab34aff61cd8cfef86297df9ee2f Author: Li Lingfeng Date: Wed Sep 4 20:34:57 2024 +0800 nfs: fix memory leak in error path of nfs4_do_reclaim commit 8f6a7c9467eaf39da4c14e5474e46190ab3fb529 upstream. Commit c77e22834ae9 ("NFSv4: Fix a potential sleep while atomic in nfs4_do_reclaim()") separate out the freeing of the state owners from nfs4_purge_state_owners() and finish it outside the rcu lock. However, the error path is omitted. As a result, the state owners in "freeme" will not be released. Fix it by adding freeing in the error path. Fixes: c77e22834ae9 ("NFSv4: Fix a potential sleep while atomic in nfs4_do_reclaim()") Signed-off-by: Li Lingfeng Cc: stable@vger.kernel.org # v5.3+ Signed-off-by: Anna Schumaker Signed-off-by: Greg Kroah-Hartman commit deaf93e3c931da64e7d16c3d97684ca25ec0267d Author: Mickaël Salaün Date: Wed Aug 21 11:56:05 2024 +0200 fs: Fix file_set_fowner LSM hook inconsistencies commit 26f204380a3c182e5adf1a798db0724d6111b597 upstream. The fcntl's F_SETOWN command sets the process that handle SIGIO/SIGURG for the related file descriptor. Before this change, the file_set_fowner LSM hook was always called, ignoring the VFS logic which may not actually change the process that handles SIGIO (e.g. TUN, TTY, dnotify), nor update the related UID/EUID. Moreover, because security_file_set_fowner() was called without lock (e.g. f_owner.lock), concurrent F_SETOWN commands could result to a race condition and inconsistent LSM states (e.g. SELinux's fown_sid) compared to struct fown_struct's UID/EUID. This change makes sure the LSM states are always in sync with the VFS state by moving the security_file_set_fowner() call close to the UID/EUID updates and using the same f_owner.lock . Rename f_modown() to __f_setown() to simplify code. Cc: stable@vger.kernel.org Cc: Al Viro Cc: Casey Schaufler Cc: Christian Brauner Cc: James Morris Cc: Jann Horn Cc: Ondrej Mosnacek Cc: Paul Moore Cc: Serge E. Hallyn Cc: Stephen Smalley Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Mickaël Salaün Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman commit 489faddb1ae75b0e1a741fe5ca2542a2b5e794a5 Author: Julian Sun Date: Fri Aug 23 21:07:30 2024 +0800 vfs: fix race between evice_inodes() and find_inode()&iput() commit 88b1afbf0f6b221f6c5bb66cc80cd3b38d696687 upstream. Hi, all Recently I noticed a bug[1] in btrfs, after digged it into and I believe it'a race in vfs. Let's assume there's a inode (ie ino 261) with i_count 1 is called by iput(), and there's a concurrent thread calling generic_shutdown_super(). cpu0: cpu1: iput() // i_count is 1 ->spin_lock(inode) ->dec i_count to 0 ->iput_final() generic_shutdown_super() ->__inode_add_lru() ->evict_inodes() // cause some reason[2] ->if (atomic_read(inode->i_count)) continue; // return before // inode 261 passed the above check // list_lru_add_obj() // and then schedule out ->spin_unlock() // note here: the inode 261 // was still at sb list and hash list, // and I_FREEING|I_WILL_FREE was not been set btrfs_iget() // after some function calls ->find_inode() // found the above inode 261 ->spin_lock(inode) // check I_FREEING|I_WILL_FREE // and passed ->__iget() ->spin_unlock(inode) // schedule back ->spin_lock(inode) // check (I_NEW|I_FREEING|I_WILL_FREE) flags, // passed and set I_FREEING iput() ->spin_unlock(inode) ->spin_lock(inode) ->evict() // dec i_count to 0 ->iput_final() ->spin_unlock() ->evict() Now, we have two threads simultaneously evicting the same inode, which may trigger the BUG(inode->i_state & I_CLEAR) statement both within clear_inode() and iput(). To fix the bug, recheck the inode->i_count after holding i_lock. Because in the most scenarios, the first check is valid, and the overhead of spin_lock() can be reduced. If there is any misunderstanding, please let me know, thanks. [1]: https://lore.kernel.org/linux-btrfs/000000000000eabe1d0619c48986@google.com/ [2]: The reason might be 1. SB_ACTIVE was removed or 2. mapping_shrinkable() return false when I reproduced the bug. Reported-by: syzbot+67ba3c42bcbb4665d3ad@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=67ba3c42bcbb4665d3ad CC: stable@vger.kernel.org Fixes: 63997e98a3be ("split invalidate_inodes()") Signed-off-by: Julian Sun Link: https://lore.kernel.org/r/20240823130730.658881-1-sunjunchao2870@gmail.com Reviewed-by: Jan Kara Signed-off-by: Christian Brauner Signed-off-by: Greg Kroah-Hartman commit 63b1db26b5ab18b07c8ca4629eb31ff3a07dcbc0 Author: Guoqing Jiang Date: Mon Aug 26 15:04:15 2024 +0800 hwrng: mtk - Use devm_pm_runtime_enable commit 78cb66caa6ab5385ac2090f1aae5f3c19e08f522 upstream. Replace pm_runtime_enable with the devres-enabled version which can trigger pm_runtime_disable. Otherwise, the below appears during reload driver. mtk_rng 1020f000.rng: Unbalanced pm_runtime_enable! Fixes: 81d2b34508c6 ("hwrng: mtk - add runtime PM support") Cc: Suggested-by: Chen-Yu Tsai Signed-off-by: Guoqing Jiang Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 8c0b118bcc1662043189c9acd09cfca6e6408086 Author: Nikita Zhandarovich Date: Wed Jul 24 10:51:58 2024 -0700 f2fs: avoid potential int overflow in sanity_check_area_boundary() commit 50438dbc483ca6a133d2bce9d5d6747bcee38371 upstream. While calculating the end addresses of main area and segment 0, u32 may be not enough to hold the result without the danger of int overflow. Just in case, play it safe and cast one of the operands to a wider type (u64). Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: fd694733d523 ("f2fs: cover large section in sanity check of super") Cc: stable@vger.kernel.org Signed-off-by: Nikita Zhandarovich Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman commit a71b1bec2b5df0b570dff0630c9b8075e5db865e Author: Nikita Zhandarovich Date: Wed Jul 24 10:05:44 2024 -0700 f2fs: prevent possible int overflow in dir_block_index() commit 47f268f33dff4a5e31541a990dc09f116f80e61c upstream. The result of multiplication between values derived from functions dir_buckets() and bucket_blocks() *could* technically reach 2^30 * 2^2 = 2^32. While unlikely to happen, it is prudent to ensure that it will not lead to integer overflow. Thus, use mul_u32_u32() as it's more appropriate to mitigate the issue. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 3843154598a0 ("f2fs: introduce large directory support") Cc: stable@vger.kernel.org Signed-off-by: Nikita Zhandarovich Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman commit 60be28d8f9cb7f5df35c08a67b28fc0598c0030e Author: Zhen Lei Date: Wed Sep 4 21:39:40 2024 +0800 debugobjects: Fix conditions in fill_pool() commit 684d28feb8546d1e9597aa363c3bfcf52fe250b7 upstream. fill_pool() uses 'obj_pool_min_free' to decide whether objects should be handed back to the kmem cache. But 'obj_pool_min_free' records the lowest historical value of the number of objects in the object pool and not the minimum number of objects which should be kept in the pool. Use 'debug_objects_pool_min_level' instead, which holds the minimum number which was scaled to the number of CPUs at boot time. [ tglx: Massage change log ] Fixes: d26bf5056fc0 ("debugobjects: Reduce number of pool_lock acquisitions in fill_pool()") Fixes: 36c4ead6f6df ("debugobjects: Add global free list and the counter") Signed-off-by: Zhen Lei Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20240904133944.2124-3-thunder.leizhen@huawei.com Signed-off-by: Greg Kroah-Hartman commit 8587887c7c67d4dcc8d24486c82d17227326208f Author: Bitterblue Smith Date: Tue Jul 23 22:31:36 2024 +0300 wifi: rtw88: 8822c: Fix reported RX band width commit a71ed5898dfae68262f79277915d1dfe34586bc6 upstream. "iw dev wlp2s0 station dump" shows incorrect rx bitrate: tx bitrate: 866.7 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 2 rx bitrate: 86.7 MBit/s VHT-MCS 9 VHT-NSS 1 This is because the RX band width is calculated incorrectly. Fix the calculation according to the phydm_rxsc_2_bw() function from the official drivers. After: tx bitrate: 866.7 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 2 rx bitrate: 390.0 MBit/s VHT-MCS 9 80MHz VHT-NSS 1 It also works correctly with the AP configured for 20 MHz and 40 MHz. Tested with RTL8822CE. Cc: stable@vger.kernel.org Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Bitterblue Smith Signed-off-by: Ping-Ke Shih Link: https://patch.msgid.link/bca8949b-e2bd-4515-98fd-70d3049a0097@gmail.com Signed-off-by: Greg Kroah-Hartman commit 8855fe99bf30aa62a01663d56de05b51d6626377 Author: Werner Sembach Date: Tue Sep 10 11:40:06 2024 +0200 ACPI: resource: Add another DMI match for the TongFang GMxXGxx commit a98cfe6ff15b62f94a44d565607a16771c847bc6 upstream. Internal documentation suggest that the TUXEDO Polaris 15 Gen5 AMD might have GMxXGxX as the board name instead of GMxXGxx. Adding both to be on the safe side. Signed-off-by: Werner Sembach Cc: All applicable Link: https://patch.msgid.link/20240910094008.1601230-1-wse@tuxedocomputers.com Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit 2364b6af90c6b6d8a4783e0d3481ca80af699554 Author: Thomas Weißschuh Date: Tue Jul 9 22:37:24 2024 +0200 ACPI: sysfs: validate return type of _STR method commit 4bb1e7d027413835b086aed35bc3f0713bc0f72b upstream. Only buffer objects are valid return values of _STR. If something else is returned description_show() will access invalid memory. Fixes: d1efe3c324ea ("ACPI: Add new sysfs interface to export device description") Cc: All applicable Signed-off-by: Thomas Weißschuh Link: https://patch.msgid.link/20240709-acpi-sysfs-groups-v2-1-058ab0667fa8@weissschuh.net Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit 959974bf5dd8bd79d106f5e43e48051db3c4c213 Author: Mikhail Lobanov Date: Mon Sep 9 09:37:36 2024 -0400 drbd: Add NULL check for net_conf to prevent dereference in state validation commit a5e61b50c9f44c5edb6e134ede6fee8806ffafa9 upstream. If the net_conf pointer is NULL and the code attempts to access its fields without a check, it will lead to a null pointer dereference. Add a NULL check before dereferencing the pointer. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 44ed167da748 ("drbd: rcu_read_lock() and rcu_dereference() for tconn->net_conf") Cc: stable@vger.kernel.org Signed-off-by: Mikhail Lobanov Link: https://lore.kernel.org/r/20240909133740.84297-1-m.lobanov@rosalinux.ru Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 9679a6e148d70dbe82d46085b91696fd2bc28e9d Author: Qiu-ji Chen Date: Fri Sep 13 16:35:04 2024 +0800 drbd: Fix atomicity violation in drbd_uuid_set_bm() commit 2f02b5af3a4482b216e6a466edecf6ba8450fa45 upstream. The violation of atomicity occurs when the drbd_uuid_set_bm function is executed simultaneously with modifying the value of device->ldev->md.uuid[UI_BITMAP]. Consider a scenario where, while device->ldev->md.uuid[UI_BITMAP] passes the validity check when its value is not zero, the value of device->ldev->md.uuid[UI_BITMAP] is written to zero. In this case, the check in drbd_uuid_set_bm might refer to the old value of device->ldev->md.uuid[UI_BITMAP] (before locking), which allows an invalid value to pass the validity check, resulting in inconsistency. To address this issue, it is recommended to include the data validity check within the locked section of the function. This modification ensures that the value of device->ldev->md.uuid[UI_BITMAP] does not change during the validation process, thereby maintaining its integrity. This possible bug is found by an experimental static analysis tool developed by our team. This tool analyzes the locking APIs to extract function pairs that can be concurrently executed, and then analyzes the instructions in the paired functions to identify possible concurrency bugs including data races and atomicity violations. Fixes: 9f2247bb9b75 ("drbd: Protect accesses to the uuid set with a spinlock") Cc: stable@vger.kernel.org Signed-off-by: Qiu-ji Chen Reviewed-by: Philipp Reisner Link: https://lore.kernel.org/r/20240913083504.10549-1-chenqiuji666@gmail.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 182e6a64dbe09f86ec479160a01beda851223a41 Author: Florian Fainelli Date: Fri Sep 6 15:54:33 2024 -0700 tty: rp2: Fix reset with non forgiving PCIe host bridges commit f16dd10ba342c429b1e36ada545fb36d4d1f0e63 upstream. The write to RP2_GLOBAL_CMD followed by an immediate read of RP2_GLOBAL_CMD in rp2_reset_asic() is intented to flush out the write, however by then the device is already in reset and cannot respond to a memory cycle access. On platforms such as the Raspberry Pi 4 and others using the pcie-brcmstb.c driver, any memory access to a device that cannot respond is met with a fatal system error, rather than being substituted with all 1s as is usually the case on PC platforms. Swapping the delay and the read ensures that the device has finished resetting before we attempt to read from it. Fixes: 7d9f49afa451 ("serial: rp2: New driver for Comtrol RocketPort 2 cards") Cc: stable Suggested-by: Jim Quinlan Signed-off-by: Florian Fainelli Link: https://lore.kernel.org/r/20240906225435.707837-1-florian.fainelli@broadcom.com Signed-off-by: Greg Kroah-Hartman commit 9b1ca33ebd05b3acef5b976c04e5e791af93ce1b Author: Jann Horn Date: Wed Aug 28 01:45:48 2024 +0200 firmware_loader: Block path traversal commit f0e5311aa8022107d63c54e2f03684ec097d1394 upstream. Most firmware names are hardcoded strings, or are constructed from fairly constrained format strings where the dynamic parts are just some hex numbers or such. However, there are a couple codepaths in the kernel where firmware file names contain string components that are passed through from a device or semi-privileged userspace; the ones I could find (not counting interfaces that require root privileges) are: - lpfc_sli4_request_firmware_update() seems to construct the firmware filename from "ModelName", a string that was previously parsed out of some descriptor ("Vital Product Data") in lpfc_fill_vpd() - nfp_net_fw_find() seems to construct a firmware filename from a model name coming from nfp_hwinfo_lookup(pf->hwinfo, "nffw.partno"), which I think parses some descriptor that was read from the device. (But this case likely isn't exploitable because the format string looks like "netronome/nic_%s", and there shouldn't be any *folders* starting with "netronome/nic_". The previous case was different because there, the "%s" is *at the start* of the format string.) - module_flash_fw_schedule() is reachable from the ETHTOOL_MSG_MODULE_FW_FLASH_ACT netlink command, which is marked as GENL_UNS_ADMIN_PERM (meaning CAP_NET_ADMIN inside a user namespace is enough to pass the privilege check), and takes a userspace-provided firmware name. (But I think to reach this case, you need to have CAP_NET_ADMIN over a network namespace that a special kind of ethernet device is mapped into, so I think this is not a viable attack path in practice.) Fix it by rejecting any firmware names containing ".." path components. For what it's worth, I went looking and haven't found any USB device drivers that use the firmware loader dangerously. Cc: stable@vger.kernel.org Reviewed-by: Danilo Krummrich Fixes: abb139e75c2c ("firmware: teach the kernel to load firmware files directly from the filesystem") Signed-off-by: Jann Horn Acked-by: Luis Chamberlain Link: https://lore.kernel.org/r/20240828-firmware-traversal-v3-1-c76529c63b5f@google.com Signed-off-by: Greg Kroah-Hartman commit 560ae2252f0e36729c1d82631c2fcca5a778966c Author: Oliver Neukum Date: Thu Sep 12 16:19:06 2024 +0200 USB: class: CDC-ACM: fix race between get_serial and set_serial commit b41c1fa155ba56d125885b0191aabaf3c508d0a3 upstream. TIOCGSERIAL is an ioctl. Thus it must be atomic. It returns two values. Racing with set_serial it can return an inconsistent result. The mutex must be taken. In terms of logic the bug is as old as the driver. In terms of code it goes back to the conversion to the get_serial and set_serial methods. Signed-off-by: Oliver Neukum Cc: stable Fixes: 99f75a1fcd865 ("cdc-acm: switch to ->[sg]et_serial()") Link: https://lore.kernel.org/r/20240912141916.1044393-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman commit 34f0773c947f0d7ec512a561508965cdf01dce91 Author: Oliver Neukum Date: Thu Sep 12 14:54:43 2024 +0200 USB: misc: cypress_cy7c63: check for short transfer commit 49cd2f4d747eeb3050b76245a7f72aa99dbd3310 upstream. As we process the second byte of a control transfer, transfers of less than 2 bytes must be discarded. This bug is as old as the driver. SIgned-off-by: Oliver Neukum CC: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240912125449.1030536-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman commit 18ae85ccae3c10edc5baa0da1a4686fa43e4204f Author: Oliver Neukum Date: Thu Sep 12 14:32:59 2024 +0200 USB: appledisplay: close race between probe and completion handler commit 8265d06b7794493d82c5c21a12d7ba43eccc30cb upstream. There is a small window during probing when IO is running but the backlight is not registered. Processing events during that time will crash. The completion handler needs to check for a backlight before scheduling work. The bug is as old as the driver. Signed-off-by: Oliver Neukum CC: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240912123317.1026049-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman commit 2f4c0f5bb143545dc5ec3b9bda182d56faba2412 Author: Robin Chen Date: Fri Aug 23 15:00:28 2024 +0800 drm/amd/display: Round calculated vtotal commit c03fca619fc687338a3b6511fdbed94096abdf79 upstream. [WHY] The calculated vtotal may has 1 line deviation. To get precisely vtotal number, round the vtotal result. Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Anthony Koo Signed-off-by: Robin Chen Signed-off-by: Alex Hung Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman commit 00ff88849b2d4fd1afb1752bf9f7ed50ab226b7e Author: Krzysztof Kozlowski Date: Sun Aug 25 20:05:22 2024 +0200 soc: versatile: integrator: fix OF node leak in probe() error path commit 874c5b601856adbfda10846b9770a6c66c41e229 upstream. Driver is leaking OF node reference obtained from of_find_matching_node(). Fixes: f956a785a282 ("soc: move SoC driver for the ARM Integrator") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/20240825-soc-dev-fixes-v1-1-ff4b35abed83@linaro.org Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman commit 45240562641d2ec77b291dc0f4f9022548c2b0d9 Author: Laurent Pinchart Date: Mon Jul 29 18:57:38 2024 +0300 Remove *.orig pattern from .gitignore commit 76be4f5a784533c71afbbb1b8f2963ef9e2ee258 upstream. Commit 3f1b0e1f2875 (".gitignore update") added *.orig and *.rej patterns to .gitignore in v2.6.23. The commit message didn't give a rationale. Later on, commit 1f5d3a6b6532 ("Remove *.rej pattern from .gitignore") removed the *.rej pattern in v2.6.26, on the rationale that *.rej files indicated something went really wrong and should not be ignored. The *.rej files are now shown by `git status`, which helps located conflicts when applying patches and lowers the probability that they will go unnoticed. It is however still easy to overlook the *.orig files which slowly polute the source tree. That's not as big of a deal as not noticing a conflict, but it's still not nice. Drop the *.orig pattern from .gitignore to avoid this and help keep the source tree clean. Signed-off-by: Laurent Pinchart [masahiroy@kernel.org: I do not have a strong opinion about this. Perhaps some people may have a different opinion. If you are someone who wants to ignore *.orig, it is likely you would want to do so across all projects. Then, $XDG_CONFIG_HOME/git/ignore would be more suitable for your needs. gitignore(5) suggests, "Patterns which a user wants Git to ignore in all situations generally go into a file specified by core.excludesFile in the user's ~/.gitconfig". Please note that you cannot do the opposite; if *.orig is ignored by the project's .gitignore, you cannot override the decision because $XDG_CONFIG_HOME/git/ignore has a lower priority. If *.orig is sitting on the fence, I'd leave it to the users. ] Signed-off-by: Masahiro Yamada Signed-off-by: Greg Kroah-Hartman commit b716e9c3603ee95ed45e938fe47227d22cf3ec35 Author: Hailey Mothershead Date: Mon Apr 15 22:19:15 2024 +0000 crypto: aead,cipher - zeroize key buffer after use commit 23e4099bdc3c8381992f9eb975c79196d6755210 upstream. I.G 9.7.B for FIPS 140-3 specifies that variables temporarily holding cryptographic information should be zeroized once they are no longer needed. Accomplish this by using kfree_sensitive for buffers that previously held the private key. Signed-off-by: Hailey Mothershead Signed-off-by: Herbert Xu Signed-off-by: Hugo SIMELIERE Signed-off-by: Greg Kroah-Hartman commit feea6020aa1750fb610962b07854a909efe4e6db Author: Simon Horman Date: Mon Sep 16 16:14:41 2024 +0100 netfilter: ctnetlink: compile ctnetlink_label_size with CONFIG_NF_CONNTRACK_EVENTS [ Upstream commit e1f1ee0e9ad8cbe660f5c104e791c5f1a7cf4c31 ] Only provide ctnetlink_label_size when it is used, which is when CONFIG_NF_CONNTRACK_EVENTS is configured. Flagged by clang-18 W=1 builds as: .../nf_conntrack_netlink.c:385:19: warning: unused function 'ctnetlink_label_size' [-Wunused-function] 385 | static inline int ctnetlink_label_size(const struct nf_conn *ct) | ^~~~~~~~~~~~~~~~~~~~ The condition on CONFIG_NF_CONNTRACK_LABELS being removed by this patch guards compilation of non-trivial implementations of ctnetlink_dump_labels() and ctnetlink_label_size(). However, this is not necessary as each of these functions will always return 0 if CONFIG_NF_CONNTRACK_LABELS is not defined as each function starts with the equivalent of: struct nf_conn_labels *labels = nf_ct_labels_find(ct); if (!labels) return 0; And nf_ct_labels_find always returns NULL if CONFIG_NF_CONNTRACK_LABELS is not enabled. So I believe that the compiler optimises the code away in such cases anyway. Found by inspection. Compile tested only. Originally splitted in two patches, Pablo Neira Ayuso collapsed them and added Fixes: tag. Fixes: 0ceabd83875b ("netfilter: ctnetlink: deliver labels to userspace") Link: https://lore.kernel.org/netfilter-devel/20240909151712.GZ2097826@kernel.org/ Signed-off-by: Simon Horman Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 16a73a0856862c7676a671f591592853bc70772e Author: Youssef Samir Date: Mon Sep 16 19:08:58 2024 +0200 net: qrtr: Update packets cloning when broadcasting [ Upstream commit f011b313e8ebd5b7abd8521b5119aecef403de45 ] When broadcasting data to multiple nodes via MHI, using skb_clone() causes all nodes to receive the same header data. This can result in packets being discarded by endpoints, leading to lost data. This issue occurs when a socket is closed, and a QRTR_TYPE_DEL_CLIENT packet is broadcasted. All nodes receive the same destination node ID, causing the node connected to the client to discard the packet and remain unaware of the client's deletion. Replace skb_clone() with pskb_copy(), to create a separate copy of the header for each sk_buff. Fixes: bdabad3e363d ("net: Add Qualcomm IPC router") Signed-off-by: Youssef Samir Reviewed-by: Jeffery Hugo Reviewed-by: Carl Vanderlip Reviewed-by: Chris Lew Link: https://patch.msgid.link/20240916170858.2382247-1-quic_yabdulra@quicinc.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 16e0387d87fc858e34449fdf2b14ed5837f761db Author: Josh Hunt Date: Tue Sep 10 15:08:22 2024 -0400 tcp: check skb is non-NULL in tcp_rto_delta_us() [ Upstream commit c8770db2d54437a5f49417ae7b46f7de23d14db6 ] We have some machines running stock Ubuntu 20.04.6 which is their 5.4.0-174-generic kernel that are running ceph and recently hit a null ptr dereference in tcp_rearm_rto(). Initially hitting it from the TLP path, but then later we also saw it getting hit from the RACK case as well. Here are examples of the oops messages we saw in each of those cases: Jul 26 15:05:02 rx [11061395.780353] BUG: kernel NULL pointer dereference, address: 0000000000000020 Jul 26 15:05:02 rx [11061395.787572] #PF: supervisor read access in kernel mode Jul 26 15:05:02 rx [11061395.792971] #PF: error_code(0x0000) - not-present page Jul 26 15:05:02 rx [11061395.798362] PGD 0 P4D 0 Jul 26 15:05:02 rx [11061395.801164] Oops: 0000 [#1] SMP NOPTI Jul 26 15:05:02 rx [11061395.805091] CPU: 0 PID: 9180 Comm: msgr-worker-1 Tainted: G W 5.4.0-174-generic #193-Ubuntu Jul 26 15:05:02 rx [11061395.814996] Hardware name: Supermicro SMC 2x26 os-gen8 64C NVME-Y 256G/H12SSW-NTR, BIOS 2.5.V1.2U.NVMe.UEFI 05/09/2023 Jul 26 15:05:02 rx [11061395.825952] RIP: 0010:tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061395.830656] Code: 87 ca 04 00 00 00 5b 41 5c 41 5d 5d c3 c3 49 8b bc 24 40 06 00 00 eb 8d 48 bb cf f7 53 e3 a5 9b c4 20 4c 89 ef e8 0c fe 0e 00 <48> 8b 78 20 48 c1 ef 03 48 89 f8 41 8b bc 24 80 04 00 00 48 f7 e3 Jul 26 15:05:02 rx [11061395.849665] RSP: 0018:ffffb75d40003e08 EFLAGS: 00010246 Jul 26 15:05:02 rx [11061395.855149] RAX: 0000000000000000 RBX: 20c49ba5e353f7cf RCX: 0000000000000000 Jul 26 15:05:02 rx [11061395.862542] RDX: 0000000062177c30 RSI: 000000000000231c RDI: ffff9874ad283a60 Jul 26 15:05:02 rx [11061395.869933] RBP: ffffb75d40003e20 R08: 0000000000000000 R09: ffff987605e20aa8 Jul 26 15:05:02 rx [11061395.877318] R10: ffffb75d40003f00 R11: ffffb75d4460f740 R12: ffff9874ad283900 Jul 26 15:05:02 rx [11061395.884710] R13: ffff9874ad283a60 R14: ffff9874ad283980 R15: ffff9874ad283d30 Jul 26 15:05:02 rx [11061395.892095] FS: 00007f1ef4a2e700(0000) GS:ffff987605e00000(0000) knlGS:0000000000000000 Jul 26 15:05:02 rx [11061395.900438] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jul 26 15:05:02 rx [11061395.906435] CR2: 0000000000000020 CR3: 0000003e450ba003 CR4: 0000000000760ef0 Jul 26 15:05:02 rx [11061395.913822] PKRU: 55555554 Jul 26 15:05:02 rx [11061395.916786] Call Trace: Jul 26 15:05:02 rx [11061395.919488] Jul 26 15:05:02 rx [11061395.921765] ? show_regs.cold+0x1a/0x1f Jul 26 15:05:02 rx [11061395.925859] ? __die+0x90/0xd9 Jul 26 15:05:02 rx [11061395.929169] ? no_context+0x196/0x380 Jul 26 15:05:02 rx [11061395.933088] ? ip6_protocol_deliver_rcu+0x4e0/0x4e0 Jul 26 15:05:02 rx [11061395.938216] ? ip6_sublist_rcv_finish+0x3d/0x50 Jul 26 15:05:02 rx [11061395.943000] ? __bad_area_nosemaphore+0x50/0x1a0 Jul 26 15:05:02 rx [11061395.947873] ? bad_area_nosemaphore+0x16/0x20 Jul 26 15:05:02 rx [11061395.952486] ? do_user_addr_fault+0x267/0x450 Jul 26 15:05:02 rx [11061395.957104] ? ipv6_list_rcv+0x112/0x140 Jul 26 15:05:02 rx [11061395.961279] ? __do_page_fault+0x58/0x90 Jul 26 15:05:02 rx [11061395.965458] ? do_page_fault+0x2c/0xe0 Jul 26 15:05:02 rx [11061395.969465] ? page_fault+0x34/0x40 Jul 26 15:05:02 rx [11061395.973217] ? tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061395.977313] ? tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061395.981408] tcp_send_loss_probe+0x10b/0x220 Jul 26 15:05:02 rx [11061395.985937] tcp_write_timer_handler+0x1b4/0x240 Jul 26 15:05:02 rx [11061395.990809] tcp_write_timer+0x9e/0xe0 Jul 26 15:05:02 rx [11061395.994814] ? tcp_write_timer_handler+0x240/0x240 Jul 26 15:05:02 rx [11061395.999866] call_timer_fn+0x32/0x130 Jul 26 15:05:02 rx [11061396.003782] __run_timers.part.0+0x180/0x280 Jul 26 15:05:02 rx [11061396.008309] ? recalibrate_cpu_khz+0x10/0x10 Jul 26 15:05:02 rx [11061396.012841] ? native_x2apic_icr_write+0x30/0x30 Jul 26 15:05:02 rx [11061396.017718] ? lapic_next_event+0x21/0x30 Jul 26 15:05:02 rx [11061396.021984] ? clockevents_program_event+0x8f/0xe0 Jul 26 15:05:02 rx [11061396.027035] run_timer_softirq+0x2a/0x50 Jul 26 15:05:02 rx [11061396.031212] __do_softirq+0xd1/0x2c1 Jul 26 15:05:02 rx [11061396.035044] do_softirq_own_stack+0x2a/0x40 Jul 26 15:05:02 rx [11061396.039480] Jul 26 15:05:02 rx [11061396.041840] do_softirq.part.0+0x46/0x50 Jul 26 15:05:02 rx [11061396.046022] __local_bh_enable_ip+0x50/0x60 Jul 26 15:05:02 rx [11061396.050460] _raw_spin_unlock_bh+0x1e/0x20 Jul 26 15:05:02 rx [11061396.054817] nf_conntrack_tcp_packet+0x29e/0xbe0 [nf_conntrack] Jul 26 15:05:02 rx [11061396.060994] ? get_l4proto+0xe7/0x190 [nf_conntrack] Jul 26 15:05:02 rx [11061396.066220] nf_conntrack_in+0xe9/0x670 [nf_conntrack] Jul 26 15:05:02 rx [11061396.071618] ipv6_conntrack_local+0x14/0x20 [nf_conntrack] Jul 26 15:05:02 rx [11061396.077356] nf_hook_slow+0x45/0xb0 Jul 26 15:05:02 rx [11061396.081098] ip6_xmit+0x3f0/0x5d0 Jul 26 15:05:02 rx [11061396.084670] ? ipv6_anycast_cleanup+0x50/0x50 Jul 26 15:05:02 rx [11061396.089282] ? __sk_dst_check+0x38/0x70 Jul 26 15:05:02 rx [11061396.093381] ? inet6_csk_route_socket+0x13b/0x200 Jul 26 15:05:02 rx [11061396.098346] inet6_csk_xmit+0xa7/0xf0 Jul 26 15:05:02 rx [11061396.102263] __tcp_transmit_skb+0x550/0xb30 Jul 26 15:05:02 rx [11061396.106701] tcp_write_xmit+0x3c6/0xc20 Jul 26 15:05:02 rx [11061396.110792] ? __alloc_skb+0x98/0x1d0 Jul 26 15:05:02 rx [11061396.114708] __tcp_push_pending_frames+0x37/0x100 Jul 26 15:05:02 rx [11061396.119667] tcp_push+0xfd/0x100 Jul 26 15:05:02 rx [11061396.123150] tcp_sendmsg_locked+0xc70/0xdd0 Jul 26 15:05:02 rx [11061396.127588] tcp_sendmsg+0x2d/0x50 Jul 26 15:05:02 rx [11061396.131245] inet6_sendmsg+0x43/0x70 Jul 26 15:05:02 rx [11061396.135075] __sock_sendmsg+0x48/0x70 Jul 26 15:05:02 rx [11061396.138994] ____sys_sendmsg+0x212/0x280 Jul 26 15:05:02 rx [11061396.143172] ___sys_sendmsg+0x88/0xd0 Jul 26 15:05:02 rx [11061396.147098] ? __seccomp_filter+0x7e/0x6b0 Jul 26 15:05:02 rx [11061396.151446] ? __switch_to+0x39c/0x460 Jul 26 15:05:02 rx [11061396.155453] ? __switch_to_asm+0x42/0x80 Jul 26 15:05:02 rx [11061396.159636] ? __switch_to_asm+0x5a/0x80 Jul 26 15:05:02 rx [11061396.163816] __sys_sendmsg+0x5c/0xa0 Jul 26 15:05:02 rx [11061396.167647] __x64_sys_sendmsg+0x1f/0x30 Jul 26 15:05:02 rx [11061396.171832] do_syscall_64+0x57/0x190 Jul 26 15:05:02 rx [11061396.175748] entry_SYSCALL_64_after_hwframe+0x5c/0xc1 Jul 26 15:05:02 rx [11061396.181055] RIP: 0033:0x7f1ef692618d Jul 26 15:05:02 rx [11061396.184893] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 ca ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 2f 44 89 c7 48 89 44 24 08 e8 fe ee ff ff 48 Jul 26 15:05:02 rx [11061396.203889] RSP: 002b:00007f1ef4a26aa0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e Jul 26 15:05:02 rx [11061396.211708] RAX: ffffffffffffffda RBX: 000000000000084b RCX: 00007f1ef692618d Jul 26 15:05:02 rx [11061396.219091] RDX: 0000000000004000 RSI: 00007f1ef4a26b10 RDI: 0000000000000275 Jul 26 15:05:02 rx [11061396.226475] RBP: 0000000000004000 R08: 0000000000000000 R09: 0000000000000020 Jul 26 15:05:02 rx [11061396.233859] R10: 0000000000000000 R11: 0000000000000293 R12: 000000000000084b Jul 26 15:05:02 rx [11061396.241243] R13: 00007f1ef4a26b10 R14: 0000000000000275 R15: 000055592030f1e8 Jul 26 15:05:02 rx [11061396.248628] Modules linked in: vrf bridge stp llc vxlan ip6_udp_tunnel udp_tunnel nls_iso8859_1 amd64_edac_mod edac_mce_amd kvm_amd kvm crct10dif_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper wmi_bmof ipmi_ssif input_leds joydev rndis_host cdc_ether usbnet mii ast drm_vram_helper ttm drm_kms_helper i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt ccp mac_hid ipmi_si ipmi_devintf ipmi_msghandler nft_ct sch_fq_codel nf_tables_set nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink ramoops reed_solomon efi_pstore drm ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid0 multipath linear mlx5_ib ib_uverbs ib_core raid1 mlx5_core hid_generic pci_hyperv_intf crc32_pclmul tls usbhid ahci mlxfw bnxt_en libahci hid nvme i2c_piix4 nvme_core wmi Jul 26 15:05:02 rx [11061396.324334] CR2: 0000000000000020 Jul 26 15:05:02 rx [11061396.327944] ---[ end trace 68a2b679d1cfb4f1 ]--- Jul 26 15:05:02 rx [11061396.433435] RIP: 0010:tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061396.438137] Code: 87 ca 04 00 00 00 5b 41 5c 41 5d 5d c3 c3 49 8b bc 24 40 06 00 00 eb 8d 48 bb cf f7 53 e3 a5 9b c4 20 4c 89 ef e8 0c fe 0e 00 <48> 8b 78 20 48 c1 ef 03 48 89 f8 41 8b bc 24 80 04 00 00 48 f7 e3 Jul 26 15:05:02 rx [11061396.457144] RSP: 0018:ffffb75d40003e08 EFLAGS: 00010246 Jul 26 15:05:02 rx [11061396.462629] RAX: 0000000000000000 RBX: 20c49ba5e353f7cf RCX: 0000000000000000 Jul 26 15:05:02 rx [11061396.470012] RDX: 0000000062177c30 RSI: 000000000000231c RDI: ffff9874ad283a60 Jul 26 15:05:02 rx [11061396.477396] RBP: ffffb75d40003e20 R08: 0000000000000000 R09: ffff987605e20aa8 Jul 26 15:05:02 rx [11061396.484779] R10: ffffb75d40003f00 R11: ffffb75d4460f740 R12: ffff9874ad283900 Jul 26 15:05:02 rx [11061396.492164] R13: ffff9874ad283a60 R14: ffff9874ad283980 R15: ffff9874ad283d30 Jul 26 15:05:02 rx [11061396.499547] FS: 00007f1ef4a2e700(0000) GS:ffff987605e00000(0000) knlGS:0000000000000000 Jul 26 15:05:02 rx [11061396.507886] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jul 26 15:05:02 rx [11061396.513884] CR2: 0000000000000020 CR3: 0000003e450ba003 CR4: 0000000000760ef0 Jul 26 15:05:02 rx [11061396.521267] PKRU: 55555554 Jul 26 15:05:02 rx [11061396.524230] Kernel panic - not syncing: Fatal exception in interrupt Jul 26 15:05:02 rx [11061396.530885] Kernel Offset: 0x1b200000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Jul 26 15:05:03 rx [11061396.660181] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- After we hit this we disabled TLP by setting tcp_early_retrans to 0 and then hit the crash in the RACK case: Aug 7 07:26:16 rx [1006006.265582] BUG: kernel NULL pointer dereference, address: 0000000000000020 Aug 7 07:26:16 rx [1006006.272719] #PF: supervisor read access in kernel mode Aug 7 07:26:16 rx [1006006.278030] #PF: error_code(0x0000) - not-present page Aug 7 07:26:16 rx [1006006.283343] PGD 0 P4D 0 Aug 7 07:26:16 rx [1006006.286057] Oops: 0000 [#1] SMP NOPTI Aug 7 07:26:16 rx [1006006.289896] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G W 5.4.0-174-generic #193-Ubuntu Aug 7 07:26:16 rx [1006006.299107] Hardware name: Supermicro SMC 2x26 os-gen8 64C NVME-Y 256G/H12SSW-NTR, BIOS 2.5.V1.2U.NVMe.UEFI 05/09/2023 Aug 7 07:26:16 rx [1006006.309970] RIP: 0010:tcp_rearm_rto+0xe4/0x160 Aug 7 07:26:16 rx [1006006.314584] Code: 87 ca 04 00 00 00 5b 41 5c 41 5d 5d c3 c3 49 8b bc 24 40 06 00 00 eb 8d 48 bb cf f7 53 e3 a5 9b c4 20 4c 89 ef e8 0c fe 0e 00 <48> 8b 78 20 48 c1 ef 03 48 89 f8 41 8b bc 24 80 04 00 00 48 f7 e3 Aug 7 07:26:16 rx [1006006.333499] RSP: 0018:ffffb42600a50960 EFLAGS: 00010246 Aug 7 07:26:16 rx [1006006.338895] RAX: 0000000000000000 RBX: 20c49ba5e353f7cf RCX: 0000000000000000 Aug 7 07:26:16 rx [1006006.346193] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff92d687ed8160 Aug 7 07:26:16 rx [1006006.353489] RBP: ffffb42600a50978 R08: 0000000000000000 R09: 00000000cd896dcc Aug 7 07:26:16 rx [1006006.360786] R10: ffff92dc3404f400 R11: 0000000000000001 R12: ffff92d687ed8000 Aug 7 07:26:16 rx [1006006.368084] R13: ffff92d687ed8160 R14: 00000000cd896dcc R15: 00000000cd8fca81 Aug 7 07:26:16 rx [1006006.375381] FS: 0000000000000000(0000) GS:ffff93158ad40000(0000) knlGS:0000000000000000 Aug 7 07:26:16 rx [1006006.383632] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Aug 7 07:26:16 rx [1006006.389544] CR2: 0000000000000020 CR3: 0000003e775ce006 CR4: 0000000000760ee0 Aug 7 07:26:16 rx [1006006.396839] PKRU: 55555554 Aug 7 07:26:16 rx [1006006.399717] Call Trace: Aug 7 07:26:16 rx [1006006.402335] Aug 7 07:26:16 rx [1006006.404525] ? show_regs.cold+0x1a/0x1f Aug 7 07:26:16 rx [1006006.408532] ? __die+0x90/0xd9 Aug 7 07:26:16 rx [1006006.411760] ? no_context+0x196/0x380 Aug 7 07:26:16 rx [1006006.415599] ? __bad_area_nosemaphore+0x50/0x1a0 Aug 7 07:26:16 rx [1006006.420392] ? _raw_spin_lock+0x1e/0x30 Aug 7 07:26:16 rx [1006006.424401] ? bad_area_nosemaphore+0x16/0x20 Aug 7 07:26:16 rx [1006006.428927] ? do_user_addr_fault+0x267/0x450 Aug 7 07:26:16 rx [1006006.433450] ? __do_page_fault+0x58/0x90 Aug 7 07:26:16 rx [1006006.437542] ? do_page_fault+0x2c/0xe0 Aug 7 07:26:16 rx [1006006.441470] ? page_fault+0x34/0x40 Aug 7 07:26:16 rx [1006006.445134] ? tcp_rearm_rto+0xe4/0x160 Aug 7 07:26:16 rx [1006006.449145] tcp_ack+0xa32/0xb30 Aug 7 07:26:16 rx [1006006.452542] tcp_rcv_established+0x13c/0x670 Aug 7 07:26:16 rx [1006006.456981] ? sk_filter_trim_cap+0x48/0x220 Aug 7 07:26:16 rx [1006006.461419] tcp_v6_do_rcv+0xdb/0x450 Aug 7 07:26:16 rx [1006006.465257] tcp_v6_rcv+0xc2b/0xd10 Aug 7 07:26:16 rx [1006006.468918] ip6_protocol_deliver_rcu+0xd3/0x4e0 Aug 7 07:26:16 rx [1006006.473706] ip6_input_finish+0x15/0x20 Aug 7 07:26:16 rx [1006006.477710] ip6_input+0xa2/0xb0 Aug 7 07:26:16 rx [1006006.481109] ? ip6_protocol_deliver_rcu+0x4e0/0x4e0 Aug 7 07:26:16 rx [1006006.486151] ip6_sublist_rcv_finish+0x3d/0x50 Aug 7 07:26:16 rx [1006006.490679] ip6_sublist_rcv+0x1aa/0x250 Aug 7 07:26:16 rx [1006006.494779] ? ip6_rcv_finish_core.isra.0+0xa0/0xa0 Aug 7 07:26:16 rx [1006006.499828] ipv6_list_rcv+0x112/0x140 Aug 7 07:26:16 rx [1006006.503748] __netif_receive_skb_list_core+0x1a4/0x250 Aug 7 07:26:16 rx [1006006.509057] netif_receive_skb_list_internal+0x1a1/0x2b0 Aug 7 07:26:16 rx [1006006.514538] gro_normal_list.part.0+0x1e/0x40 Aug 7 07:26:16 rx [1006006.519068] napi_complete_done+0x91/0x130 Aug 7 07:26:16 rx [1006006.523352] mlx5e_napi_poll+0x18e/0x610 [mlx5_core] Aug 7 07:26:16 rx [1006006.528481] net_rx_action+0x142/0x390 Aug 7 07:26:16 rx [1006006.532398] __do_softirq+0xd1/0x2c1 Aug 7 07:26:16 rx [1006006.536142] irq_exit+0xae/0xb0 Aug 7 07:26:16 rx [1006006.539452] do_IRQ+0x5a/0xf0 Aug 7 07:26:16 rx [1006006.542590] common_interrupt+0xf/0xf Aug 7 07:26:16 rx [1006006.546421] Aug 7 07:26:16 rx [1006006.548695] RIP: 0010:native_safe_halt+0xe/0x10 Aug 7 07:26:16 rx [1006006.553399] Code: 7b ff ff ff eb bd 90 90 90 90 90 90 e9 07 00 00 00 0f 00 2d 36 2c 50 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d 26 2c 50 00 fb f4 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 e8 dd 5e 61 ff 65 Aug 7 07:26:16 rx [1006006.572309] RSP: 0018:ffffb42600177e70 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffc2 Aug 7 07:26:16 rx [1006006.580040] RAX: ffffffff8ed08b20 RBX: 0000000000000005 RCX: 0000000000000001 Aug 7 07:26:16 rx [1006006.587337] RDX: 00000000f48eeca2 RSI: 0000000000000082 RDI: 0000000000000082 Aug 7 07:26:16 rx [1006006.594635] RBP: ffffb42600177e90 R08: 0000000000000000 R09: 000000000000020f Aug 7 07:26:16 rx [1006006.601931] R10: 0000000000100000 R11: 0000000000000000 R12: 0000000000000005 Aug 7 07:26:16 rx [1006006.609229] R13: ffff93157deb5f00 R14: 0000000000000000 R15: 0000000000000000 Aug 7 07:26:16 rx [1006006.616530] ? __cpuidle_text_start+0x8/0x8 Aug 7 07:26:16 rx [1006006.620886] ? default_idle+0x20/0x140 Aug 7 07:26:16 rx [1006006.624804] arch_cpu_idle+0x15/0x20 Aug 7 07:26:16 rx [1006006.628545] default_idle_call+0x23/0x30 Aug 7 07:26:16 rx [1006006.632640] do_idle+0x1fb/0x270 Aug 7 07:26:16 rx [1006006.636035] cpu_startup_entry+0x20/0x30 Aug 7 07:26:16 rx [1006006.640126] start_secondary+0x178/0x1d0 Aug 7 07:26:16 rx [1006006.644218] secondary_startup_64+0xa4/0xb0 Aug 7 07:26:17 rx [1006006.648568] Modules linked in: vrf bridge stp llc vxlan ip6_udp_tunnel udp_tunnel nls_iso8859_1 nft_ct amd64_edac_mod edac_mce_amd kvm_amd kvm crct10dif_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper wmi_bmof ipmi_ssif input_leds joydev rndis_host cdc_ether usbnet ast mii drm_vram_helper ttm drm_kms_helper i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt ccp mac_hid ipmi_si ipmi_devintf ipmi_msghandler sch_fq_codel nf_tables_set nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink ramoops reed_solomon efi_pstore drm ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid0 multipath linear mlx5_ib ib_uverbs ib_core raid1 hid_generic mlx5_core pci_hyperv_intf crc32_pclmul usbhid ahci tls mlxfw bnxt_en hid libahci nvme i2c_piix4 nvme_core wmi [last unloaded: cpuid] Aug 7 07:26:17 rx [1006006.726180] CR2: 0000000000000020 Aug 7 07:26:17 rx [1006006.729718] ---[ end trace e0e2e37e4e612984 ]--- Prior to seeing the first crash and on other machines we also see the warning in tcp_send_loss_probe() where packets_out is non-zero, but both transmit and retrans queues are empty so we know the box is seeing some accounting issue in this area: Jul 26 09:15:27 kernel: ------------[ cut here ]------------ Jul 26 09:15:27 kernel: invalid inflight: 2 state 1 cwnd 68 mss 8988 Jul 26 09:15:27 kernel: WARNING: CPU: 16 PID: 0 at net/ipv4/tcp_output.c:2605 tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: Modules linked in: vrf bridge stp llc vxlan ip6_udp_tunnel udp_tunnel nls_iso8859_1 nft_ct amd64_edac_mod edac_mce_amd kvm_amd kvm crct10dif_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper wmi_bmof ipmi_ssif joydev input_leds rndis_host cdc_ether usbnet mii ast drm_vram_helper ttm drm_kms_he> Jul 26 09:15:27 kernel: CPU: 16 PID: 0 Comm: swapper/16 Not tainted 5.4.0-174-generic #193-Ubuntu Jul 26 09:15:27 kernel: Hardware name: Supermicro SMC 2x26 os-gen8 64C NVME-Y 256G/H12SSW-NTR, BIOS 2.5.V1.2U.NVMe.UEFI 05/09/2023 Jul 26 09:15:27 kernel: RIP: 0010:tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: Code: 08 26 01 00 75 e2 41 0f b6 54 24 12 41 8b 8c 24 c0 06 00 00 45 89 f0 48 c7 c7 e0 b4 20 a7 c6 05 8d 08 26 01 01 e8 4a c0 0f 00 <0f> 0b eb ba 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 Jul 26 09:15:27 kernel: RSP: 0018:ffffb7838088ce00 EFLAGS: 00010286 Jul 26 09:15:27 kernel: RAX: 0000000000000000 RBX: ffff9b84b5630430 RCX: 0000000000000006 Jul 26 09:15:27 kernel: RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff9b8e4621c8c0 Jul 26 09:15:27 kernel: RBP: ffffb7838088ce18 R08: 0000000000000927 R09: 0000000000000004 Jul 26 09:15:27 kernel: R10: 0000000000000000 R11: 0000000000000001 R12: ffff9b84b5630000 Jul 26 09:15:27 kernel: R13: 0000000000000000 R14: 000000000000231c R15: ffff9b84b5630430 Jul 26 09:15:27 kernel: FS: 0000000000000000(0000) GS:ffff9b8e46200000(0000) knlGS:0000000000000000 Jul 26 09:15:27 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jul 26 09:15:27 kernel: CR2: 000056238cec2380 CR3: 0000003e49ede005 CR4: 0000000000760ee0 Jul 26 09:15:27 kernel: PKRU: 55555554 Jul 26 09:15:27 kernel: Call Trace: Jul 26 09:15:27 kernel: Jul 26 09:15:27 kernel: ? show_regs.cold+0x1a/0x1f Jul 26 09:15:27 kernel: ? __warn+0x98/0xe0 Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: ? report_bug+0xd1/0x100 Jul 26 09:15:27 kernel: ? do_error_trap+0x9b/0xc0 Jul 26 09:15:27 kernel: ? do_invalid_op+0x3c/0x50 Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: ? invalid_op+0x1e/0x30 Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: tcp_write_timer_handler+0x1b4/0x240 Jul 26 09:15:27 kernel: tcp_write_timer+0x9e/0xe0 Jul 26 09:15:27 kernel: ? tcp_write_timer_handler+0x240/0x240 Jul 26 09:15:27 kernel: call_timer_fn+0x32/0x130 Jul 26 09:15:27 kernel: __run_timers.part.0+0x180/0x280 Jul 26 09:15:27 kernel: ? timerqueue_add+0x9b/0xb0 Jul 26 09:15:27 kernel: ? enqueue_hrtimer+0x3d/0x90 Jul 26 09:15:27 kernel: ? do_error_trap+0x9b/0xc0 Jul 26 09:15:27 kernel: ? do_invalid_op+0x3c/0x50 Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: ? invalid_op+0x1e/0x30 Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: tcp_write_timer_handler+0x1b4/0x240 Jul 26 09:15:27 kernel: tcp_write_timer+0x9e/0xe0 Jul 26 09:15:27 kernel: ? tcp_write_timer_handler+0x240/0x240 Jul 26 09:15:27 kernel: call_timer_fn+0x32/0x130 Jul 26 09:15:27 kernel: __run_timers.part.0+0x180/0x280 Jul 26 09:15:27 kernel: ? timerqueue_add+0x9b/0xb0 Jul 26 09:15:27 kernel: ? enqueue_hrtimer+0x3d/0x90 Jul 26 09:15:27 kernel: ? recalibrate_cpu_khz+0x10/0x10 Jul 26 09:15:27 kernel: ? ktime_get+0x3e/0xa0 Jul 26 09:15:27 kernel: ? native_x2apic_icr_write+0x30/0x30 Jul 26 09:15:27 kernel: run_timer_softirq+0x2a/0x50 Jul 26 09:15:27 kernel: __do_softirq+0xd1/0x2c1 Jul 26 09:15:27 kernel: irq_exit+0xae/0xb0 Jul 26 09:15:27 kernel: smp_apic_timer_interrupt+0x7b/0x140 Jul 26 09:15:27 kernel: apic_timer_interrupt+0xf/0x20 Jul 26 09:15:27 kernel: Jul 26 09:15:27 kernel: RIP: 0010:native_safe_halt+0xe/0x10 Jul 26 09:15:27 kernel: Code: 7b ff ff ff eb bd 90 90 90 90 90 90 e9 07 00 00 00 0f 00 2d 36 2c 50 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d 26 2c 50 00 fb f4 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 e8 dd 5e 61 ff 65 Jul 26 09:15:27 kernel: RSP: 0018:ffffb783801cfe70 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 Jul 26 09:15:27 kernel: RAX: ffffffffa6908b20 RBX: 0000000000000010 RCX: 0000000000000001 Jul 26 09:15:27 kernel: RDX: 000000006fc0c97e RSI: 0000000000000082 RDI: 0000000000000082 Jul 26 09:15:27 kernel: RBP: ffffb783801cfe90 R08: 0000000000000000 R09: 0000000000000225 Jul 26 09:15:27 kernel: R10: 0000000000100000 R11: 0000000000000000 R12: 0000000000000010 Jul 26 09:15:27 kernel: R13: ffff9b8e390b0000 R14: 0000000000000000 R15: 0000000000000000 Jul 26 09:15:27 kernel: ? __cpuidle_text_start+0x8/0x8 Jul 26 09:15:27 kernel: ? default_idle+0x20/0x140 Jul 26 09:15:27 kernel: arch_cpu_idle+0x15/0x20 Jul 26 09:15:27 kernel: default_idle_call+0x23/0x30 Jul 26 09:15:27 kernel: do_idle+0x1fb/0x270 Jul 26 09:15:27 kernel: cpu_startup_entry+0x20/0x30 Jul 26 09:15:27 kernel: start_secondary+0x178/0x1d0 Jul 26 09:15:27 kernel: secondary_startup_64+0xa4/0xb0 Jul 26 09:15:27 kernel: ---[ end trace e7ac822987e33be1 ]--- The NULL ptr deref is coming from tcp_rto_delta_us() attempting to pull an skb off the head of the retransmit queue and then dereferencing that skb to get the skb_mstamp_ns value via tcp_skb_timestamp_us(skb). The crash is the same one that was reported a # of years ago here: https://lore.kernel.org/netdev/86c0f836-9a7c-438b-d81a-839be45f1f58@gmail.com/T/#t and the kernel we're running has the fix which was added to resolve this issue. Unfortunately we've been unsuccessful so far in reproducing this problem in the lab and do not have the luxury of pushing out a new kernel to try and test if newer kernels resolve this issue at the moment. I realize this is a report against both an Ubuntu kernel and also an older 5.4 kernel. I have reported this issue to Ubuntu here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2077657 however I feel like since this issue has possibly cropped up again it makes sense to build in some protection in this path (even on the latest kernel versions) since the code in question just blindly assumes there's a valid skb without testing if it's NULL b/f it looks at the timestamp. Given we have seen crashes in this path before and now this case it seems like we should protect ourselves for when packets_out accounting is incorrect. While we should fix that root cause we should also just make sure the skb is not NULL before dereferencing it. Also add a warn once here to capture some information if/when the problem case is hit again. Fixes: e1a10ef7fa87 ("tcp: introduce tcp_rto_delta_us() helper for xmit timer fix") Signed-off-by: Josh Hunt Acked-by: Neal Cardwell Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit b5a84b6c772564c8359a9a0fbaeb2a2944aa1ee9 Author: Kaixin Wang Date: Sun Sep 15 22:40:46 2024 +0800 net: seeq: Fix use after free vulnerability in ether3 Driver Due to Race Condition [ Upstream commit b5109b60ee4fcb2f2bb24f589575e10cc5283ad4 ] In the ether3_probe function, a timer is initialized with a callback function ether3_ledoff, bound to &prev(dev)->timer. Once the timer is started, there is a risk of a race condition if the module or device is removed, triggering the ether3_remove function to perform cleanup. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | ether3_ledoff ether3_remove | free_netdev(dev); | put_devic | kfree(dev); | | ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2); | // use dev Fix it by ensuring that the timer is canceled before proceeding with the cleanup in ether3_remove. Fixes: 6fd9c53f7186 ("net: seeq: Convert timers to use timer_setup()") Signed-off-by: Kaixin Wang Link: https://patch.msgid.link/20240915144045.451-1-kxwang23@m.fudan.edu.cn Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 7bcbc4cda777d26c88500d973fad0d497fc8a82e Author: Eric Dumazet Date: Fri Sep 13 17:06:15 2024 +0000 netfilter: nf_reject_ipv6: fix nf_reject_ip6_tcphdr_put() [ Upstream commit 9c778fe48d20ef362047e3376dee56d77f8500d4 ] syzbot reported that nf_reject_ip6_tcphdr_put() was possibly sending garbage on the four reserved tcp bits (th->res1) Use skb_put_zero() to clear the whole TCP header, as done in nf_reject_ip_tcphdr_put() BUG: KMSAN: uninit-value in nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255 nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255 nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344 nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775 process_backlog+0x4ad/0xa50 net/core/dev.c:6108 __napi_poll+0xe7/0x980 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963 handle_softirqs+0x1ce/0x800 kernel/softirq.c:554 __do_softirq+0x14/0x1a kernel/softirq.c:588 do_softirq+0x9a/0x100 kernel/softirq.c:455 __local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:382 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:908 [inline] __dev_queue_xmit+0x2692/0x5610 net/core/dev.c:4450 dev_queue_xmit include/linux/netdevice.h:3105 [inline] neigh_resolve_output+0x9ca/0xae0 net/core/neighbour.c:1565 neigh_output include/net/neighbour.h:542 [inline] ip6_finish_output2+0x2347/0x2ba0 net/ipv6/ip6_output.c:141 __ip6_finish_output net/ipv6/ip6_output.c:215 [inline] ip6_finish_output+0xbb8/0x14b0 net/ipv6/ip6_output.c:226 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x356/0x620 net/ipv6/ip6_output.c:247 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip6_xmit+0x1ba6/0x25d0 net/ipv6/ip6_output.c:366 inet6_csk_xmit+0x442/0x530 net/ipv6/inet6_connection_sock.c:135 __tcp_transmit_skb+0x3b07/0x4880 net/ipv4/tcp_output.c:1466 tcp_transmit_skb net/ipv4/tcp_output.c:1484 [inline] tcp_connect+0x35b6/0x7130 net/ipv4/tcp_output.c:4143 tcp_v6_connect+0x1bcc/0x1e40 net/ipv6/tcp_ipv6.c:333 __inet_stream_connect+0x2ef/0x1730 net/ipv4/af_inet.c:679 inet_stream_connect+0x6a/0xd0 net/ipv4/af_inet.c:750 __sys_connect_file net/socket.c:2061 [inline] __sys_connect+0x606/0x690 net/socket.c:2078 __do_sys_connect net/socket.c:2088 [inline] __se_sys_connect net/socket.c:2085 [inline] __x64_sys_connect+0x91/0xe0 net/socket.c:2085 x64_sys_call+0x27a5/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:43 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was stored to memory at: nf_reject_ip6_tcphdr_put+0x60c/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:249 nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344 nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775 process_backlog+0x4ad/0xa50 net/core/dev.c:6108 __napi_poll+0xe7/0x980 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963 handle_softirqs+0x1ce/0x800 kernel/softirq.c:554 __do_softirq+0x14/0x1a kernel/softirq.c:588 Uninit was stored to memory at: nf_reject_ip6_tcphdr_put+0x2ca/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:231 nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344 nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775 process_backlog+0x4ad/0xa50 net/core/dev.c:6108 __napi_poll+0xe7/0x980 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963 handle_softirqs+0x1ce/0x800 kernel/softirq.c:554 __do_softirq+0x14/0x1a kernel/softirq.c:588 Uninit was created at: slab_post_alloc_hook mm/slub.c:3998 [inline] slab_alloc_node mm/slub.c:4041 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4084 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:583 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:674 alloc_skb include/linux/skbuff.h:1320 [inline] nf_send_reset6+0x98d/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:327 nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775 process_backlog+0x4ad/0xa50 net/core/dev.c:6108 __napi_poll+0xe7/0x980 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963 handle_softirqs+0x1ce/0x800 kernel/softirq.c:554 __do_softirq+0x14/0x1a kernel/softirq.c:588 Fixes: c8d7b98bec43 ("netfilter: move nf_send_resetX() code to nf_reject_ipvX modules") Reported-by: syzbot Signed-off-by: Eric Dumazet Reviewed-by: Simon Horman Reviewed-by: Pablo Neira Ayuso Link: https://patch.msgid.link/20240913170615.3670897-1-edumazet@google.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit b8efd48ed58331d5660dc44b04cdc901d93045c0 Author: Suzuki K Poulose Date: Tue Jul 2 14:28:46 2024 +0100 coresight: tmc: sg: Do not leak sg_table [ Upstream commit c58dc5a1f886f2fcc1133746d0cbaa1fe7fd44ff ] Running perf with cs_etm on Juno triggers the following kmemleak warning ! :~# cat /sys/kernel/debug/kmemleak unreferenced object 0xffffff8806b6d720 (size 96): comm "perf", pid 562, jiffies 4297810960 hex dump (first 32 bytes): 38 d8 13 07 88 ff ff ff 00 d0 9e 85 c0 ff ff ff 8............... 00 10 00 88 c0 ff ff ff 00 f0 ff f7 ff 00 00 00 ................ backtrace (crc 1dbf6e00): [] kmemleak_alloc+0xbc/0xd8 [] kmalloc_trace_noprof+0x220/0x2e8 [] tmc_alloc_sg_table+0x48/0x208 [coresight_tmc] [] tmc_etr_alloc_sg_buf+0xac/0x240 [coresight_tmc] [] tmc_alloc_etr_buf.constprop.0+0x1f0/0x260 [coresight_tmc] [] alloc_etr_buf.constprop.0.isra.0+0x74/0xa8 [coresight_tmc] [] tmc_alloc_etr_buffer+0x110/0x260 [coresight_tmc] [] etm_setup_aux+0x204/0x3b0 [coresight] [] rb_alloc_aux+0x20c/0x318 [] perf_mmap+0x2e4/0x7a0 [] mmap_region+0x3b0/0xa08 [] do_mmap+0x3a0/0x500 [] vm_mmap_pgoff+0x100/0x1d0 [] ksys_mmap_pgoff+0xb8/0x110 [] __arm64_sys_mmap+0x38/0x58 [] invoke_syscall.constprop.0+0x58/0x100 This due to the fact that we do not free the "sg_table" itself while freeing up the SG table and data pages. Fix this by freeing the sg_table in tmc_free_sg_table(). Fixes: 99443ea19e8b ("coresight: Add generic TMC sg table framework") Cc: Mike Leach Cc: James Clark Signed-off-by: Suzuki K Poulose Reviewed-by: Anshuman Khandual Link: https://lore.kernel.org/r/20240702132846.1677261-1-suzuki.poulose@arm.com Signed-off-by: Sasha Levin commit f7f24d67f0fd82b4289f6a495fa6826c640aa998 Author: Guillaume Stols Date: Tue Jul 2 17:34:11 2024 +0000 iio: adc: ad7606: fix standby gpio state to match the documentation [ Upstream commit 059fe4f8bbdf5cad212e1aeeb3e8968c80b9ff3b ] The binding's documentation specifies that "As the line is active low, it should be marked GPIO_ACTIVE_LOW". However, in the driver, it was handled the opposite way. This commit sets the driver's behaviour in sync with the documentation Fixes: 722407a4e8c0 ("staging:iio:ad7606: Use GPIO descriptor API") Signed-off-by: Guillaume Stols Reviewed-by: Nuno Sa Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin commit d44f8a17f440f4d275ce765e10ca016a874284e3 Author: Guillaume Stols Date: Tue Jul 2 17:34:10 2024 +0000 iio: adc: ad7606: fix oversampling gpio array [ Upstream commit 8dc4594b54dbaaba40dc8884ad3d42083de39434 ] gpiod_set_array_value was misused here: the implementation relied on the assumption that an unsigned long was required for each gpio, while the function expects a bit array stored in "as much unsigned long as needed for storing one bit per GPIO", i.e it is using a bit field. This leaded to incorrect parameter passed to gpiod_set_array_value, that would set 1 value instead of 3. It also prevents to select the software mode correctly for the AD7606B. Fixes: d2a415c86c6b ("iio: adc: ad7606: Add support for AD7606B ADC") Fixes: 41f71e5e7daf ("staging: iio: adc: ad7606: Use find_closest() macro") Signed-off-by: Guillaume Stols Reviewed-by: Nuno Sa Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin commit 6ec0f44471949096c9b08c4ed39ad2fb06c33d58 Author: Chao Yu Date: Wed Jun 26 09:47:27 2024 +0800 f2fs: reduce expensive checkpoint trigger frequency [ Upstream commit aaf8c0b9ae042494cb4585883b15c1332de77840 ] We may trigger high frequent checkpoint for below case: 1. mkdir /mnt/dir1; set dir1 encrypted 2. touch /mnt/file1; fsync /mnt/file1 3. mkdir /mnt/dir2; set dir2 encrypted 4. touch /mnt/file2; fsync /mnt/file2 ... Although, newly created dir and file are not related, due to commit bbf156f7afa7 ("f2fs: fix lost xattrs of directories"), we will trigger checkpoint whenever fsync() comes after a new encrypted dir created. In order to avoid such performance regression issue, let's record an entry including directory's ino in global cache whenever we update directory's xattr data, and then triggerring checkpoint() only if xattr metadata of target file's parent was updated. This patch updates to cover below no encryption case as well: 1) parent is checkpointed 2) set_xattr(dir) w/ new xnid 3) create(file) 4) fsync(file) Fixes: bbf156f7afa7 ("f2fs: fix lost xattrs of directories") Reported-by: wangzijie Reported-by: Zhiguo Niu Tested-by: Zhiguo Niu Reported-by: Yunlei He Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin commit 18a2f126fa47d7c8c39bcd1afa8073730e8e5cc7 Author: Chao Yu Date: Wed Jul 19 21:50:46 2023 +0800 f2fs: remove unneeded check condition in __f2fs_setxattr() [ Upstream commit bc3994ffa4cf23f55171943c713366132c3ff45d ] It has checked return value of write_all_xattrs(), remove unneeded following check condition. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Stable-dep-of: aaf8c0b9ae04 ("f2fs: reduce expensive checkpoint trigger frequency") Signed-off-by: Sasha Levin commit 363eb38b9a76b8e529a3e58793295177372198d8 Author: Chao Yu Date: Wed Jul 19 21:50:45 2023 +0800 f2fs: fix to update i_ctime in __f2fs_setxattr() [ Upstream commit 8874ad7dae8d91d24cc87c545c0073b3b2da5688 ] generic/728 - output mismatch (see /media/fstests/results//generic/728.out.bad) --- tests/generic/728.out 2023-07-19 07:10:48.362711407 +0000 +++ /media/fstests/results//generic/728.out.bad 2023-07-19 08:39:57.000000000 +0000 QA output created by 728 +Expected ctime to change after setxattr. +Expected ctime to change after removexattr. Silence is golden ... (Run 'diff -u /media/fstests/tests/generic/728.out /media/fstests/results//generic/728.out.bad' to see the entire diff) generic/729 1s It needs to update i_ctime after {set,remove}xattr, fix it. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Stable-dep-of: aaf8c0b9ae04 ("f2fs: reduce expensive checkpoint trigger frequency") Signed-off-by: Sasha Levin commit 97a5007f2e5a5cafa3e35546a76128c8d646c274 Author: Yonggil Song Date: Fri Sep 2 11:07:49 2022 +0900 f2fs: fix typo [ Upstream commit d382e36970ecf8242921400db2afde15fb6ed49e ] Fix typo in f2fs.h Detected by Jaeyoon Choi Signed-off-by: Yonggil Song Signed-off-by: Jaegeuk Kim Stable-dep-of: aaf8c0b9ae04 ("f2fs: reduce expensive checkpoint trigger frequency") Signed-off-by: Sasha Levin commit f1850e6ccab84697912338fd60e1f1c7055c39a6 Author: Chao Yu Date: Fri Dec 25 16:52:27 2020 +0800 f2fs: enhance to update i_mode and acl atomically in f2fs_setattr() [ Upstream commit 17232e830afb800acdcc22ae8980bf9d330393ef ] Previously, in f2fs_setattr(), we don't update S_ISUID|S_ISGID|S_ISVTX bits with S_IRWXUGO bits and acl entries atomically, so in error path, chmod() may partially success, this patch enhances to make chmod() flow being atomical. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Stable-dep-of: aaf8c0b9ae04 ("f2fs: reduce expensive checkpoint trigger frequency") Signed-off-by: Sasha Levin commit 6d07040ae5c2214e39c7444d898039c9e655a79a Author: Li Lingfeng Date: Tue Sep 3 19:14:46 2024 +0800 nfsd: return -EINVAL when namelen is 0 [ Upstream commit 22451a16b7ab7debefce660672566be887db1637 ] When we have a corrupted main.sqlite in /var/lib/nfs/nfsdcld/, it may result in namelen being 0, which will cause memdup_user() to return ZERO_SIZE_PTR. When we access the name.data that has been assigned the value of ZERO_SIZE_PTR in nfs4_client_to_reclaim(), null pointer dereference is triggered. [ T1205] ================================================================== [ T1205] BUG: KASAN: null-ptr-deref in nfs4_client_to_reclaim+0xe9/0x260 [ T1205] Read of size 1 at addr 0000000000000010 by task nfsdcld/1205 [ T1205] [ T1205] CPU: 11 PID: 1205 Comm: nfsdcld Not tainted 5.10.0-00003-g2c1423731b8d #406 [ T1205] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 [ T1205] Call Trace: [ T1205] dump_stack+0x9a/0xd0 [ T1205] ? nfs4_client_to_reclaim+0xe9/0x260 [ T1205] __kasan_report.cold+0x34/0x84 [ T1205] ? nfs4_client_to_reclaim+0xe9/0x260 [ T1205] kasan_report+0x3a/0x50 [ T1205] nfs4_client_to_reclaim+0xe9/0x260 [ T1205] ? nfsd4_release_lockowner+0x410/0x410 [ T1205] cld_pipe_downcall+0x5ca/0x760 [ T1205] ? nfsd4_cld_tracking_exit+0x1d0/0x1d0 [ T1205] ? down_write_killable_nested+0x170/0x170 [ T1205] ? avc_policy_seqno+0x28/0x40 [ T1205] ? selinux_file_permission+0x1b4/0x1e0 [ T1205] rpc_pipe_write+0x84/0xb0 [ T1205] vfs_write+0x143/0x520 [ T1205] ksys_write+0xc9/0x170 [ T1205] ? __ia32_sys_read+0x50/0x50 [ T1205] ? ktime_get_coarse_real_ts64+0xfe/0x110 [ T1205] ? ktime_get_coarse_real_ts64+0xa2/0x110 [ T1205] do_syscall_64+0x33/0x40 [ T1205] entry_SYSCALL_64_after_hwframe+0x67/0xd1 [ T1205] RIP: 0033:0x7fdbdb761bc7 [ T1205] Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 514 [ T1205] RSP: 002b:00007fff8c4b7248 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ T1205] RAX: ffffffffffffffda RBX: 000000000000042b RCX: 00007fdbdb761bc7 [ T1205] RDX: 000000000000042b RSI: 00007fff8c4b75f0 RDI: 0000000000000008 [ T1205] RBP: 00007fdbdb761bb0 R08: 0000000000000000 R09: 0000000000000001 [ T1205] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000042b [ T1205] R13: 0000000000000008 R14: 00007fff8c4b75f0 R15: 0000000000000000 [ T1205] ================================================================== Fix it by checking namelen. Signed-off-by: Li Lingfeng Fixes: 74725959c33c ("nfsd: un-deprecate nfsdcld") Reviewed-by: Jeff Layton Reviewed-by: Scott Mayhew Tested-by: Scott Mayhew Signed-off-by: Chuck Lever Signed-off-by: Sasha Levin commit c6b16e700cf4d959af524bd9d3978407ff7ce462 Author: Guoqing Jiang Date: Wed Aug 21 22:03:18 2024 +0800 nfsd: call cache_put if xdr_reserve_space returns NULL [ Upstream commit d078cbf5c38de83bc31f83c47dcd2184c04a50c7 ] If not enough buffer space available, but idmap_lookup has triggered lookup_fn which calls cache_get and returns successfully. Then we missed to call cache_put here which pairs with cache_get. Fixes: ddd1ea563672 ("nfsd4: use xdr_reserve_space in attribute encoding") Signed-off-by: Guoqing Jiang Reviwed-by: Jeff Layton Signed-off-by: Chuck Lever Signed-off-by: Sasha Levin commit 4b2fbba4e44630a59b09d32627b63c4ffdf70f78 Author: Jinjie Ruan Date: Thu Aug 31 20:39:27 2023 +0800 ntb: intel: Fix the NULL vs IS_ERR() bug for debugfs_create_dir() [ Upstream commit e229897d373a87ee09ec5cc4ecd4bb2f895fc16b ] The debugfs_create_dir() function returns error pointers. It never returns NULL. So use IS_ERR() to check it. Fixes: e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers") Signed-off-by: Jinjie Ruan Reviewed-by: Dave Jiang Signed-off-by: Jon Mason Signed-off-by: Sasha Levin commit 4e1fe68d695af367506ea3c794c5969630f21697 Author: Mikhail Lobanov Date: Thu Sep 12 10:58:39 2024 -0400 RDMA/cxgb4: Added NULL check for lookup_atid [ Upstream commit e766e6a92410ca269161de059fff0843b8ddd65f ] The lookup_atid() function can return NULL if the ATID is invalid or does not exist in the identifier table, which could lead to dereferencing a null pointer without a check in the `act_establish()` and `act_open_rpl()` functions. Add a NULL check to prevent null pointer dereferencing. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: cfdda9d76436 ("RDMA/cxgb4: Add driver for Chelsio T4 RNIC") Signed-off-by: Mikhail Lobanov Link: https://patch.msgid.link/20240912145844.77516-1-m.lobanov@rosalinux.ru Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin commit b1a0c9e35ab5af3f4601912058555171128e53b3 Author: Jinjie Ruan Date: Mon Jul 8 11:28:46 2024 +0800 riscv: Fix fp alignment bug in perf_callchain_user() [ Upstream commit 22ab08955ea13be04a8efd20cc30890e0afaa49c ] The standard RISC-V calling convention said: "The stack grows downward and the stack pointer is always kept 16-byte aligned". So perf_callchain_user() should check whether 16-byte aligned for fp. Link: https://riscv.org/wp-content/uploads/2015/01/riscv-calling.pdf Fixes: dbeb90b0c1eb ("riscv: Add perf callchain support") Signed-off-by: Jinjie Ruan Cc: Björn Töpel Link: https://lore.kernel.org/r/20240708032847.2998158-2-ruanjinjie@huawei.com Signed-off-by: Palmer Dabbelt Signed-off-by: Sasha Levin commit 5db879525c139449cd18c47413475763c06306e1 Author: Junxian Huang Date: Fri Sep 6 17:34:43 2024 +0800 RDMA/hns: Optimize hem allocation performance [ Upstream commit fe51f6254d81f5a69c31df16353d6539b2b51630 ] When allocating MTT hem, for each hop level of each hem that is being allocated, the driver iterates the hem list to find out whether the bt page has been allocated in this hop level. If not, allocate a new one and splice it to the list. The time complexity is O(n^2) in worst cases. Currently the allocation for-loop uses 'unit' as the step size. This actually has taken into account the reuse of last-hop-level MTT bt pages by multiple buffer pages. Thus pages of last hop level will never have been allocated, so there is no need to iterate the hem list in last hop level. Removing this unnecessary iteration can reduce the time complexity to O(n). Fixes: 38389eaa4db1 ("RDMA/hns: Add mtr support for mixed multihop addressing") Signed-off-by: Junxian Huang Link: https://patch.msgid.link/20240906093444.3571619-9-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin commit 9a1fe8d6893c74b844dfc71e8636d8b41cc940a5 Author: Jonas Blixt Date: Thu Aug 1 14:18:45 2024 +0200 watchdog: imx_sc_wdt: Don't disable WDT in suspend [ Upstream commit 2d9d6d300fb0a4ae4431bb308027ac9385746d42 ] Parts of the suspend and resume chain is left unprotected if we disable the WDT here. >From experiments we can see that the SCU disables and re-enables the WDT when we enter and leave suspend to ram. By not touching the WDT here we are protected by the WDT all the way to the SCU. Signed-off-by: Jonas Blixt CC: Anson Huang Fixes: 986857acbc9a ("watchdog: imx_sc: Add i.MX system controller watchdog support") Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20240801121845.1465765-1-jonas.blixt@actia.se Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Sasha Levin commit 6b669f3888d3e4349c93b8f0756a3b79d4556692 Author: Wang Jianzheng Date: Thu Aug 29 14:48:23 2024 +0800 pinctrl: mvebu: Fix devinit_dove_pinctrl_probe function [ Upstream commit c25478419f6fd3f74c324a21ec007cf14f2688d7 ] When an error occurs during the execution of the function __devinit_dove_pinctrl_probe, the clk is not properly disabled. Fix this by calling clk_disable_unprepare before return. Fixes: ba607b6238a1 ("pinctrl: mvebu: make pdma clock on dove mandatory") Signed-off-by: Wang Jianzheng Link: https://lore.kernel.org/20240829064823.19808-1-wangjianzheng@vivo.com Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin commit 4679497af6562c7a2683e59245e68ab62f165585 Author: David Lechner Date: Mon Aug 26 10:35:29 2024 -0500 clk: ti: dra7-atl: Fix leak of of_nodes [ Upstream commit 9d6e9f10e2e031fb7bfb3030a7d1afc561a28fea ] This fix leaking the of_node references in of_dra7_atl_clk_probe(). The docs for of_parse_phandle_with_args() say that the caller must call of_node_put() on the returned node. This adds the missing of_node_put() to fix the leak. Fixes: 9ac33b0ce81f ("CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic)") Signed-off-by: David Lechner Link: https://lore.kernel.org/r/20240826-clk-fix-leak-v1-1-f55418a13aa6@baylibre.com Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin commit 888d0b49f2fc9122b2eb132f8a35aeb163b931a1 Author: Yang Yingliang Date: Mon Aug 19 10:46:25 2024 +0800 pinctrl: single: fix missing error code in pcs_probe() [ Upstream commit cacd8cf79d7823b07619865e994a7916fcc8ae91 ] If pinctrl_enable() fails in pcs_probe(), it should return the error code. Fixes: 8f773bfbdd42 ("pinctrl: single: fix possible memory leak when pinctrl_enable() fails") Signed-off-by: Yang Yingliang Link: https://lore.kernel.org/20240819024625.154441-1-yangyingliang@huaweicloud.com Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin commit 29b3bbd912b8db86df7a3c180b910ccb621f5635 Author: Zhu Yanjun Date: Tue Aug 20 13:33:36 2024 +0200 RDMA/iwcm: Fix WARNING:at_kernel/workqueue.c:#check_flush_dependency [ Upstream commit 86dfdd8288907f03c18b7fb462e0e232c4f98d89 ] In the commit aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to destroying CM IDs"), the function flush_workqueue is invoked to flush the work queue iwcm_wq. But at that time, the work queue iwcm_wq was created via the function alloc_ordered_workqueue without the flag WQ_MEM_RECLAIM. Because the current process is trying to flush the whole iwcm_wq, if iwcm_wq doesn't have the flag WQ_MEM_RECLAIM, verify that the current process is not reclaiming memory or running on a workqueue which doesn't have the flag WQ_MEM_RECLAIM as that can break forward-progress guarantee leading to a deadlock. The call trace is as below: [ 125.350876][ T1430] Call Trace: [ 125.356281][ T1430] [ 125.361285][ T1430] ? __warn (kernel/panic.c:693) [ 125.367640][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9)) [ 125.375689][ T1430] ? report_bug (lib/bug.c:180 lib/bug.c:219) [ 125.382505][ T1430] ? handle_bug (arch/x86/kernel/traps.c:239) [ 125.388987][ T1430] ? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1)) [ 125.395831][ T1430] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621) [ 125.403125][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9)) [ 125.410984][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9)) [ 125.418764][ T1430] __flush_workqueue (kernel/workqueue.c:3970) [ 125.426021][ T1430] ? __pfx___might_resched (kernel/sched/core.c:10151) [ 125.433431][ T1430] ? destroy_cm_id (drivers/infiniband/core/iwcm.c:375) iw_cm [ 125.441209][ T1430] ? __pfx___flush_workqueue (kernel/workqueue.c:3910) [ 125.473900][ T1430] ? _raw_spin_lock_irqsave (arch/x86/include/asm/atomic.h:107 include/linux/atomic/atomic-arch-fallback.h:2170 include/linux/atomic/atomic-instrumented.h:1302 include/asm-generic/qspinlock.h:111 include/linux/spinlock.h:187 include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162) [ 125.473909][ T1430] ? __pfx__raw_spin_lock_irqsave (kernel/locking/spinlock.c:161) [ 125.482537][ T1430] _destroy_id (drivers/infiniband/core/cma.c:2044) rdma_cm [ 125.495072][ T1430] nvme_rdma_free_queue (drivers/nvme/host/rdma.c:656 drivers/nvme/host/rdma.c:650) nvme_rdma [ 125.505827][ T1430] nvme_rdma_reset_ctrl_work (drivers/nvme/host/rdma.c:2180) nvme_rdma [ 125.505831][ T1430] process_one_work (kernel/workqueue.c:3231) [ 125.515122][ T1430] worker_thread (kernel/workqueue.c:3306 kernel/workqueue.c:3393) [ 125.515127][ T1430] ? __pfx_worker_thread (kernel/workqueue.c:3339) [ 125.531837][ T1430] kthread (kernel/kthread.c:389) [ 125.539864][ T1430] ? __pfx_kthread (kernel/kthread.c:342) [ 125.550628][ T1430] ret_from_fork (arch/x86/kernel/process.c:147) [ 125.558840][ T1430] ? __pfx_kthread (kernel/kthread.c:342) [ 125.558844][ T1430] ret_from_fork_asm (arch/x86/entry/entry_64.S:257) [ 125.566487][ T1430] [ 125.566488][ T1430] ---[ end trace 0000000000000000 ]--- Fixes: aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to destroying CM IDs") Link: https://patch.msgid.link/r/20240820113336.19860-1-yanjun.zhu@linux.dev Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-lkp/202408151633.fc01893c-oliver.sang@intel.com Tested-by: kernel test robot Signed-off-by: Zhu Yanjun Reviewed-by: Bart Van Assche Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit fd9d50ee750912b4483385ab8e737902f99088e0 Author: Sean Anderson Date: Fri May 31 12:13:33 2024 -0400 PCI: xilinx-nwl: Fix register misspelling [ Upstream commit a437027ae1730b8dc379c75fa0dd7d3036917400 ] MSIC -> MISC Fixes: c2a7ff18edcd ("PCI: xilinx-nwl: Expand error logging") Link: https://lore.kernel.org/r/20240531161337.864994-4-sean.anderson@linux.dev Signed-off-by: Sean Anderson Signed-off-by: Bjorn Helgaas Signed-off-by: Sasha Levin commit 9c9afc3e75069fcfb067727973242cfbf00dd7eb Author: Dan Carpenter Date: Fri Jul 19 18:53:26 2024 -0500 PCI: keystone: Fix if-statement expression in ks_pcie_quirk() [ Upstream commit 6188a1c762eb9bbd444f47696eda77a5eae6207a ] This code accidentally uses && where || was intended. It potentially results in a NULL dereference. Thus, fix the if-statement expression to use the correct condition. Fixes: 86f271f22bbb ("PCI: keystone: Add workaround for Errata #i2037 (AM65x SR 1.0)") Link: https://lore.kernel.org/linux-pci/1b762a93-e1b2-4af3-8c04-c8843905c279@stanley.mountain Signed-off-by: Dan Carpenter [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński Reviewed-by: Manivannan Sadhasivam Reviewed-by: Siddharth Vadapalli Signed-off-by: Sasha Levin commit 883f794c6e498ae24680aead55c16f66b06cfc30 Author: Junlin Li Date: Wed Jul 3 01:50:23 2024 +0800 drivers: media: dvb-frontends/rtl2830: fix an out-of-bounds write error [ Upstream commit 46d7ebfe6a75a454a5fa28604f0ef1491f9d8d14 ] Ensure index in rtl2830_pid_filter does not exceed 31 to prevent out-of-bounds access. dev->filters is a 32-bit value, so set_bit and clear_bit functions should only operate on indices from 0 to 31. If index is 32, it will attempt to access a non-existent 33rd bit, leading to out-of-bounds access. Change the boundary check from index > 32 to index >= 32 to resolve this issue. Fixes: df70ddad81b4 ("[media] rtl2830: implement PID filter") Signed-off-by: Junlin Li Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin commit 49b33c38d202d3327dcfd058e27f541dcc308b92 Author: Junlin Li Date: Tue Jul 2 21:24:13 2024 +0800 drivers: media: dvb-frontends/rtl2832: fix an out-of-bounds write error [ Upstream commit 8ae06f360cfaca2b88b98ca89144548b3186aab1 ] Ensure index in rtl2832_pid_filter does not exceed 31 to prevent out-of-bounds access. dev->filters is a 32-bit value, so set_bit and clear_bit functions should only operate on indices from 0 to 31. If index is 32, it will attempt to access a non-existent 33rd bit, leading to out-of-bounds access. Change the boundary check from index > 32 to index >= 32 to resolve this issue. Signed-off-by: Junlin Li Signed-off-by: Hans Verkuil Fixes: 4b01e01a81b6 ("[media] rtl2832: implement PID filter") [hverkuil: added fixes tag, rtl2830_pid_filter -> rtl2832_pid_filter in logmsg] Signed-off-by: Sasha Levin commit 08e13a9ee815d0fb9ea3ccfe44114d3c08c06f55 Author: Jonas Karlman Date: Sat Jun 15 17:03:53 2024 +0000 clk: rockchip: Set parent rate for DCLK_VOP clock on RK3228 [ Upstream commit 1d34b9757523c1ad547bd6d040381f62d74a3189 ] Similar to DCLK_LCDC on RK3328, the DCLK_VOP on RK3228 is typically parented by the hdmiphy clk and it is expected that the DCLK_VOP and hdmiphy clk rate are kept in sync. Use CLK_SET_RATE_PARENT and CLK_SET_RATE_NO_REPARENT flags, same as used on RK3328, to make full use of all possible supported display modes. Fixes: 0a9d4ac08ebc ("clk: rockchip: set the clock ids for RK3228 VOP") Fixes: 307a2e9ac524 ("clk: rockchip: add clock controller for rk3228") Signed-off-by: Jonas Karlman Link: https://lore.kernel.org/r/20240615170417.3134517-3-jonas@kwiboo.se Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin commit 1993819aff7f915612d2c4dbe6b501d18ee0e408 Author: Ian Rogers Date: Sat Aug 31 00:04:11 2024 -0700 perf time-utils: Fix 32-bit nsec parsing [ Upstream commit 38e2648a81204c9fc5b4c87a8ffce93a6ed91b65 ] The "time utils" test fails in 32-bit builds: ... parse_nsec_time("18446744073.709551615") Failed. ptime 4294967295709551615 expected 18446744073709551615 ... Switch strtoul to strtoull as an unsigned long in 32-bit build isn't 64-bits. Fixes: c284d669a20d408b ("perf tools: Move parse_nsec_time to time-utils.c") Signed-off-by: Ian Rogers Cc: Adrian Hunter Cc: Alexander Shishkin Cc: Athira Rajeev Cc: Chaitanya S Prakash Cc: Colin Ian King Cc: David Ahern Cc: Dominique Martinet Cc: Ingo Molnar Cc: James Clark Cc: Jiri Olsa Cc: John Garry Cc: Junhao He Cc: Kan Liang Cc: Mark Rutland Cc: Masami Hiramatsu Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Yang Jihong Link: https://lore.kernel.org/r/20240831070415.506194-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin commit fc8d057930349a65f36289c5a2391f870c726fd7 Author: Yang Jihong Date: Mon Aug 19 10:47:20 2024 +0800 perf sched timehist: Fixed timestamp error when unable to confirm event sched_in time [ Upstream commit 39c243411bdb8fb35777adf49ee32549633c4e12 ] If sched_in event for current task is not recorded, sched_in timestamp will be set to end_time of time window interest, causing an error in timestamp show. In this case, we choose to ignore this event. Test scenario: perf[1229608] does not record the first sched_in event, run time and sch delay are both 0 # perf sched timehist Samples of sched_switch event do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ --------- --------- --------- 2090450.763231 [0000] perf[1229608] 0.000 0.000 0.000 2090450.763235 [0000] migration/0[15] 0.000 0.001 0.003 2090450.763263 [0001] perf[1229608] 0.000 0.000 0.000 2090450.763268 [0001] migration/1[21] 0.000 0.001 0.004 2090450.763302 [0002] perf[1229608] 0.000 0.000 0.000 2090450.763309 [0002] migration/2[27] 0.000 0.001 0.007 2090450.763338 [0003] perf[1229608] 0.000 0.000 0.000 2090450.763343 [0003] migration/3[33] 0.000 0.001 0.004 Before: arbitrarily specify a time window of interest, timestamp will be set to an incorrect value # perf sched timehist --time 100,200 Samples of sched_switch event do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ --------- --------- --------- 200.000000 [0000] perf[1229608] 0.000 0.000 0.000 200.000000 [0001] perf[1229608] 0.000 0.000 0.000 200.000000 [0002] perf[1229608] 0.000 0.000 0.000 200.000000 [0003] perf[1229608] 0.000 0.000 0.000 200.000000 [0004] perf[1229608] 0.000 0.000 0.000 200.000000 [0005] perf[1229608] 0.000 0.000 0.000 200.000000 [0006] perf[1229608] 0.000 0.000 0.000 200.000000 [0007] perf[1229608] 0.000 0.000 0.000 After: # perf sched timehist --time 100,200 Samples of sched_switch event do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ --------- --------- --------- Fixes: 853b74071110bed3 ("perf sched timehist: Add option to specify time window of interest") Signed-off-by: Yang Jihong Acked-by: Namhyung Kim Cc: Adrian Hunter Cc: Alexander Shishkin Cc: David Ahern Cc: Ian Rogers Cc: Ingo Molnar Cc: James Clark Cc: Jiri Olsa Cc: Kan Liang Cc: Mark Rutland Cc: Peter Zijlstra Link: https://lore.kernel.org/r/20240819024720.2405244-1-yangjihong@bytedance.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin commit 5c4a88f2aa62e3ca8944bf4d4a3703c1ab9da392 Author: Yang Jihong Date: Tue Aug 6 10:35:33 2024 +0800 perf sched timehist: Fix missing free of session in perf_sched__timehist() [ Upstream commit 6bdf5168b6fb19541b0c1862bdaa596d116c7bfb ] When perf_time__parse_str() fails in perf_sched__timehist(), need to free session that was previously created, fix it. Fixes: 853b74071110bed3 ("perf sched timehist: Add option to specify time window of interest") Signed-off-by: Yang Jihong Acked-by: Namhyung Kim Cc: Adrian Hunter Cc: Alexander Shishkin Cc: David Ahern Cc: Ian Rogers Cc: Ingo Molnar Cc: Jiri Olsa Cc: Kan Liang Cc: Mark Rutland Cc: Peter Zijlstra Link: https://lore.kernel.org/r/20240806023533.1316348-1-yangjihong@bytedance.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin commit adfbc2440a1a3288429d35883b1066fd803d9da4 Author: Daniel Borkmann Date: Fri Sep 13 21:17:46 2024 +0200 bpf: Fix bpf_strtol and bpf_strtoul helpers for 32bit [ Upstream commit cfe69c50b05510b24e26ccb427c7cc70beafd6c1 ] The bpf_strtol() and bpf_strtoul() helpers are currently broken on 32bit: The argument type ARG_PTR_TO_LONG is BPF-side "long", not kernel-side "long" and therefore always considered fixed 64bit no matter if 64 or 32bit underlying architecture. This contract breaks in case of the two mentioned helpers since their BPF_CALL definition for the helpers was added with {unsigned,}long *res. Meaning, the transition from BPF-side "long" (BPF program) to kernel-side "long" (BPF helper) breaks here. Both helpers call __bpf_strtoll() with "long long" correctly, but later assigning the result into 32-bit "*(long *)" on 32bit architectures. From a BPF program point of view, this means upper bits will be seen as uninitialised. Therefore, fix both BPF_CALL signatures to {s,u}64 types to fix this situation. Now, changing also uapi/bpf.h helper documentation which generates bpf_helper_defs.h for BPF programs is tricky: Changing signatures there to __{s,u}64 would trigger compiler warnings (incompatible pointer types passing 'long *' to parameter of type '__s64 *' (aka 'long long *')) for existing BPF programs. Leaving the signatures as-is would be fine as from BPF program point of view it is still BPF-side "long" and thus equivalent to __{s,u}64 on 64 or 32bit underlying architectures. Note that bpf_strtol() and bpf_strtoul() are the only helpers with this issue. Fixes: d7a4cb9b6705 ("bpf: Introduce bpf_strtol and bpf_strtoul helpers") Reported-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann Acked-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/481fcec8-c12c-9abb-8ecb-76c71c009959@iogearbox.net Link: https://lore.kernel.org/r/20240913191754.13290-1-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin commit ed76d381dae125b81d09934e365391a656249da8 Author: Ryusuke Konishi Date: Wed Sep 4 17:13:09 2024 +0900 nilfs2: fix potential oob read in nilfs_btree_check_delete() [ Upstream commit f9c96351aa6718b42a9f42eaf7adce0356bdb5e8 ] The function nilfs_btree_check_delete(), which checks whether degeneration to direct mapping occurs before deleting a b-tree entry, causes memory access outside the block buffer when retrieving the maximum key if the root node has no entries. This does not usually happen because b-tree mappings with 0 child nodes are never created by mkfs.nilfs2 or nilfs2 itself. However, it can happen if the b-tree root node read from a device is configured that way, so fix this potential issue by adding a check for that case. Link: https://lkml.kernel.org/r/20240904081401.16682-4-konishi.ryusuke@gmail.com Fixes: 17c76b0104e4 ("nilfs2: B-tree based block mapping") Signed-off-by: Ryusuke Konishi Cc: Lizhi Xu Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 98d0c6f11f1cb6ce53e1a138f1003fdbc113bd1f Author: Ryusuke Konishi Date: Wed Sep 4 17:13:08 2024 +0900 nilfs2: determine empty node blocks as corrupted [ Upstream commit 111b812d3662f3a1b831d19208f83aa711583fe6 ] Due to the nature of b-trees, nilfs2 itself and admin tools such as mkfs.nilfs2 will never create an intermediate b-tree node block with 0 child nodes, nor will they delete (key, pointer)-entries that would result in such a state. However, it is possible that a b-tree node block is corrupted on the backing device and is read with 0 child nodes. Because operation is not guaranteed if the number of child nodes is 0 for intermediate node blocks other than the root node, modify nilfs_btree_node_broken(), which performs sanity checks when reading a b-tree node block, so that such cases will be judged as metadata corruption. Link: https://lkml.kernel.org/r/20240904081401.16682-3-konishi.ryusuke@gmail.com Fixes: 17c76b0104e4 ("nilfs2: B-tree based block mapping") Signed-off-by: Ryusuke Konishi Cc: Lizhi Xu Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 1d94dbdfbb64cc48d10dec65cc3c4fbf2497b343 Author: Ryusuke Konishi Date: Wed Sep 4 17:13:07 2024 +0900 nilfs2: fix potential null-ptr-deref in nilfs_btree_insert() [ Upstream commit 9403001ad65ae4f4c5de368bdda3a0636b51d51a ] Patch series "nilfs2: fix potential issues with empty b-tree nodes". This series addresses three potential issues with empty b-tree nodes that can occur with corrupted filesystem images, including one recently discovered by syzbot. This patch (of 3): If a b-tree is broken on the device, and the b-tree height is greater than 2 (the level of the root node is greater than 1) even if the number of child nodes of the b-tree root is 0, a NULL pointer dereference occurs in nilfs_btree_prepare_insert(), which is called from nilfs_btree_insert(). This is because, when the number of child nodes of the b-tree root is 0, nilfs_btree_do_lookup() does not set the block buffer head in any of path[x].bp_bh, leaving it as the initial value of NULL, but if the level of the b-tree root node is greater than 1, nilfs_btree_get_nonroot_node(), which accesses the buffer memory of path[x].bp_bh, is called. Fix this issue by adding a check to nilfs_btree_root_broken(), which performs sanity checks when reading the root node from the device, to detect this inconsistency. Thanks to Lizhi Xu for trying to solve the bug and clarifying the cause early on. Link: https://lkml.kernel.org/r/20240904081401.16682-1-konishi.ryusuke@gmail.com Link: https://lkml.kernel.org/r/20240902084101.138971-1-lizhi.xu@windriver.com Link: https://lkml.kernel.org/r/20240904081401.16682-2-konishi.ryusuke@gmail.com Fixes: 17c76b0104e4 ("nilfs2: B-tree based block mapping") Signed-off-by: Ryusuke Konishi Reported-by: syzbot+9bff4c7b992038a7409f@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=9bff4c7b992038a7409f Cc: Lizhi Xu Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 8adf0eb4e361a9e060d54f4bd0ac9c5d85277d20 Author: Thadeu Lima de Souza Cascardo Date: Wed Aug 21 12:23:24 2024 -0300 ext4: avoid OOB when system.data xattr changes underneath the filesystem [ Upstream commit c6b72f5d82b1017bad80f9ebf502832fc321d796 ] When looking up for an entry in an inlined directory, if e_value_offs is changed underneath the filesystem by some change in the block device, it will lead to an out-of-bounds access that KASAN detects as an UAF. EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: none. loop0: detected capacity change from 2048 to 2047 ================================================================== BUG: KASAN: use-after-free in ext4_search_dir+0xf2/0x1c0 fs/ext4/namei.c:1500 Read of size 1 at addr ffff88803e91130f by task syz-executor269/5103 CPU: 0 UID: 0 PID: 5103 Comm: syz-executor269 Not tainted 6.11.0-rc4-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 ext4_search_dir+0xf2/0x1c0 fs/ext4/namei.c:1500 ext4_find_inline_entry+0x4be/0x5e0 fs/ext4/inline.c:1697 __ext4_find_entry+0x2b4/0x1b30 fs/ext4/namei.c:1573 ext4_lookup_entry fs/ext4/namei.c:1727 [inline] ext4_lookup+0x15f/0x750 fs/ext4/namei.c:1795 lookup_one_qstr_excl+0x11f/0x260 fs/namei.c:1633 filename_create+0x297/0x540 fs/namei.c:3980 do_symlinkat+0xf9/0x3a0 fs/namei.c:4587 __do_sys_symlinkat fs/namei.c:4610 [inline] __se_sys_symlinkat fs/namei.c:4607 [inline] __x64_sys_symlinkat+0x95/0xb0 fs/namei.c:4607 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f3e73ced469 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 21 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff4d40c258 EFLAGS: 00000246 ORIG_RAX: 000000000000010a RAX: ffffffffffffffda RBX: 0032656c69662f2e RCX: 00007f3e73ced469 RDX: 0000000020000200 RSI: 00000000ffffff9c RDI: 00000000200001c0 RBP: 0000000000000000 R08: 00007fff4d40c290 R09: 00007fff4d40c290 R10: 0023706f6f6c2f76 R11: 0000000000000246 R12: 00007fff4d40c27c R13: 0000000000000003 R14: 431bde82d7b634db R15: 00007fff4d40c2b0 Calling ext4_xattr_ibody_find right after reading the inode with ext4_get_inode_loc will lead to a check of the validity of the xattrs, avoiding this problem. Reported-by: syzbot+0c2508114d912a54ee79@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=0c2508114d912a54ee79 Fixes: e8e948e7802a ("ext4: let ext4_find_entry handle inline data") Signed-off-by: Thadeu Lima de Souza Cascardo Link: https://patch.msgid.link/20240821152324.3621860-5-cascardo@igalia.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit 52c5fdad089b88c5950ca4255e82a842a7857770 Author: Thadeu Lima de Souza Cascardo Date: Wed Aug 21 12:23:22 2024 -0300 ext4: return error on ext4_find_inline_entry [ Upstream commit 4d231b91a944f3cab355fce65af5871fb5d7735b ] In case of errors when reading an inode from disk or traversing inline directory entries, return an error-encoded ERR_PTR instead of returning NULL. ext4_find_inline_entry only caller, __ext4_find_entry already returns such encoded errors. Signed-off-by: Thadeu Lima de Souza Cascardo Link: https://patch.msgid.link/20240821152324.3621860-3-cascardo@igalia.com Signed-off-by: Theodore Ts'o Stable-dep-of: c6b72f5d82b1 ("ext4: avoid OOB when system.data xattr changes underneath the filesystem") Signed-off-by: Sasha Levin commit dd0bc5b7bdb8585c2940ecdc086f19c0832514db Author: Kemeng Shi Date: Tue Aug 20 21:22:30 2024 +0800 ext4: avoid negative min_clusters in find_group_orlov() [ Upstream commit bb0a12c3439b10d88412fd3102df5b9a6e3cd6dc ] min_clusters is signed integer and will be converted to unsigned integer when compared with unsigned number stats.free_clusters. If min_clusters is negative, it will be converted to a huge unsigned value in which case all groups may not meet the actual desired free clusters. Set negative min_clusters to 0 to avoid unexpected behavior. Fixes: ac27a0ec112a ("[PATCH] ext4: initial copy of files from ext3") Signed-off-by: Kemeng Shi Link: https://patch.msgid.link/20240820132234.2759926-4-shikemeng@huaweicloud.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit e8c1082c72b50c08f2f407736f32749af1876111 Author: Jiawei Ye Date: Mon Sep 2 08:47:26 2024 +0000 smackfs: Use rcu_assign_pointer() to ensure safe assignment in smk_set_cipso [ Upstream commit 2749749afa071f8a0e405605de9da615e771a7ce ] In the `smk_set_cipso` function, the `skp->smk_netlabel.attr.mls.cat` field is directly assigned to a new value without using the appropriate RCU pointer assignment functions. According to RCU usage rules, this is illegal and can lead to unpredictable behavior, including data inconsistencies and impossible-to-diagnose memory corruption issues. This possible bug was identified using a static analysis tool developed by myself, specifically designed to detect RCU-related issues. To address this, the assignment is now done using rcu_assign_pointer(), which ensures that the pointer assignment is done safely, with the necessary memory barriers and synchronization. This change prevents potential RCU dereference issues by ensuring that the `cat` field is safely updated while still adhering to RCU's requirements. Fixes: 0817534ff9ea ("smackfs: Fix use-after-free in netlbl_catmap_walk()") Signed-off-by: Jiawei Ye Signed-off-by: Casey Schaufler Signed-off-by: Sasha Levin commit 22e130fe6050893e636aef40a7b3a8906f1697bc Author: yangerkun Date: Sat Aug 17 16:55:10 2024 +0800 ext4: clear EXT4_GROUP_INFO_WAS_TRIMMED_BIT even mount with discard [ Upstream commit 20cee68f5b44fdc2942d20f3172a262ec247b117 ] Commit 3d56b8d2c74c ("ext4: Speed up FITRIM by recording flags in ext4_group_info") speed up fstrim by skipping trim trimmed group. We also has the chance to clear trimmed once there exists some block free for this group(mount without discard), and the next trim for this group will work well too. For mount with discard, we will issue dicard when we free blocks, so leave trimmed flag keep alive to skip useless trim trigger from userspace seems reasonable. But for some case like ext4 build on dm-thinpool(ext4 blocksize 4K, pool blocksize 128K), discard from ext4 maybe unaligned for dm thinpool, and thinpool will just finish this discard(see process_discard_bio when begein equals to end) without actually process discard. For this case, trim from userspace can really help us to free some thinpool block. So convert to clear trimmed flag for all case no matter mounted with discard or not. Fixes: 3d56b8d2c74c ("ext4: Speed up FITRIM by recording flags in ext4_group_info") Signed-off-by: yangerkun Reviewed-by: Jan Kara Link: https://patch.msgid.link/20240817085510.2084444-1-yangerkun@huaweicloud.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit cbb86a23390603c1b3df1742d00d39f7661d7405 Author: Mauricio Faria de Oliveira Date: Mon Oct 5 21:48:38 2020 -0300 jbd2: introduce/export functions jbd2_journal_submit|finish_inode_data_buffers() [ Upstream commit aa3c0c61f62d682259e3e66cdc01846290f9cd6c ] Export functions that implement the current behavior done for an inode in journal_submit|finish_inode_data_buffers(). No functional change. Signed-off-by: Mauricio Faria de Oliveira Suggested-by: Jan Kara Reviewed-by: Jan Kara Reviewed-by: Andreas Dilger Link: https://lore.kernel.org/r/20201006004841.600488-2-mfo@canonical.com Signed-off-by: Theodore Ts'o Stable-dep-of: 20cee68f5b44 ("ext4: clear EXT4_GROUP_INFO_WAS_TRIMMED_BIT even mount with discard") Signed-off-by: Sasha Levin commit a611f9ffcfb81713f1f274c6f9736a344b1f73e5 Author: Chen Yu Date: Tue Aug 27 19:23:08 2024 +0800 kthread: fix task state in kthread worker if being frozen [ Upstream commit e16c7b07784f3fb03025939c4590b9a7c64970a7 ] When analyzing a kernel waring message, Peter pointed out that there is a race condition when the kworker is being frozen and falls into try_to_freeze() with TASK_INTERRUPTIBLE, which could trigger a might_sleep() warning in try_to_freeze(). Although the root cause is not related to freeze()[1], it is still worthy to fix this issue ahead. One possible race scenario: CPU 0 CPU 1 ----- ----- // kthread_worker_fn set_current_state(TASK_INTERRUPTIBLE); suspend_freeze_processes() freeze_processes static_branch_inc(&freezer_active); freeze_kernel_threads pm_nosig_freezing = true; if (work) { //false __set_current_state(TASK_RUNNING); } else if (!freezing(current)) //false, been frozen freezing(): if (static_branch_unlikely(&freezer_active)) if (pm_nosig_freezing) return true; schedule() } // state is still TASK_INTERRUPTIBLE try_to_freeze() might_sleep() <--- warning Fix this by explicitly set the TASK_RUNNING before entering try_to_freeze(). Link: https://lore.kernel.org/lkml/Zs2ZoAcUsZMX2B%2FI@chenyu5-mobl2/ [1] Link: https://lkml.kernel.org/r/20240827112308.181081-1-yu.c.chen@intel.com Fixes: b56c0d8937e6 ("kthread: implement kthread_worker") Signed-off-by: Chen Yu Suggested-by: Peter Zijlstra Suggested-by: Andrew Morton Cc: Andreas Gruenbacher Cc: David Gow Cc: Mateusz Guzik Cc: Mickaël Salaün Cc: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 0f0de5d3536147a1b347b6ad519262e66f74e4eb Author: Rob Clark Date: Mon Dec 14 19:03:14 2020 -0800 kthread: add kthread_work tracepoints [ Upstream commit f630c7c6f10546ebff15c3a856e7949feb7a2372 ] While migrating some code from wq to kthread_worker, I found that I missed the execute_start/end tracepoints. So add similar tracepoints for kthread_work. And for completeness, queue_work tracepoint (although this one differs slightly from the matching workqueue tracepoint). Link: https://lkml.kernel.org/r/20201010180323.126634-1-robdclark@gmail.com Signed-off-by: Rob Clark Cc: Rob Clark Cc: Steven Rostedt Cc: Ingo Molnar Cc: "Peter Zijlstra (Intel)" Cc: Phil Auld Cc: Valentin Schneider Cc: Thara Gopinath Cc: Randy Dunlap Cc: Vincent Donnefort Cc: Mel Gorman Cc: Jens Axboe Cc: Marcelo Tosatti Cc: Frederic Weisbecker Cc: Ilias Stamatis Cc: Liang Chen Cc: Ben Dooks Cc: Peter Zijlstra Cc: "J. Bruce Fields" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Stable-dep-of: e16c7b07784f ("kthread: fix task state in kthread worker if being frozen") Signed-off-by: Sasha Levin commit 6c371167fd0423e354e17cd796bd517bd6a94697 Author: Lasse Collin Date: Sun Jul 21 16:36:24 2024 +0300 xz: cleanup CRC32 edits from 2018 [ Upstream commit 2ee96abef214550d9e92f5143ee3ac1fd1323e67 ] In 2018, a dependency on was added to avoid duplicating the same constant in multiple files. Two months later it was found to be a bad idea and the definition of CRC32_POLY_LE macro was moved into xz_private.h to avoid including . xz_private.h is a wrong place for it too. Revert back to the upstream version which has the poly in xz_crc32_init() in xz_crc32.c. Link: https://lkml.kernel.org/r/20240721133633.47721-10-lasse.collin@tukaani.org Fixes: faa16bc404d7 ("lib: Use existing define with polynomial") Fixes: 242cdad873a7 ("lib/xz: Put CRC32_POLY_LE in xz_private.h") Signed-off-by: Lasse Collin Reviewed-by: Sam James Tested-by: Michael Ellerman (powerpc) Cc: Krzysztof Kozlowski Cc: Herbert Xu Cc: Joel Stanley Cc: Albert Ou Cc: Catalin Marinas Cc: Emil Renner Berthing Cc: Greg Kroah-Hartman Cc: Jonathan Corbet Cc: Jubin Zhong Cc: Jules Maselbas Cc: Palmer Dabbelt Cc: Paul Walmsley Cc: Randy Dunlap Cc: Rui Li Cc: Simon Glass Cc: Thomas Gleixner Cc: Will Deacon Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 8cd5699831e445bf8c3f008aef385c0558e83cc0 Author: Tony Ambardar Date: Mon Jul 29 02:24:19 2024 -0700 selftests/bpf: Fix error compiling test_lru_map.c [ Upstream commit cacf2a5a78cd1f5f616eae043ebc6f024104b721 ] Although the post-increment in macro 'CPU_SET(next++, &cpuset)' seems safe, the sequencing can raise compile errors, so move the increment outside the macro. This avoids an error seen using gcc 12.3.0 for mips64el/musl-libc: In file included from test_lru_map.c:11: test_lru_map.c: In function 'sched_next_online': test_lru_map.c:129:29: error: operation on 'next' may be undefined [-Werror=sequence-point] 129 | CPU_SET(next++, &cpuset); | ^ cc1: all warnings being treated as errors Fixes: 3fbfadce6012 ("bpf: Fix test_lru_sanity5() in test_lru_map.c") Signed-off-by: Tony Ambardar Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/22993dfb11ccf27925a626b32672fd3324cb76c4.1722244708.git.tony.ambardar@gmail.com Signed-off-by: Sasha Levin commit 44d9436ea95fd02ca6b239e2deaafdad34119833 Author: Tony Ambardar Date: Mon Jul 22 22:54:41 2024 -0700 selftests/bpf: Fix compiling tcp_rtt.c with musl-libc [ Upstream commit 18826fb0b79c3c3cd1fe765d85f9c6f1a902c722 ] The GNU version of 'struct tcp_info' in 'netinet/tcp.h' is not exposed by musl headers unless _GNU_SOURCE is defined. Add this definition to fix errors seen compiling for mips64el/musl-libc: tcp_rtt.c: In function 'wait_for_ack': tcp_rtt.c:24:25: error: storage size of 'info' isn't known 24 | struct tcp_info info; | ^~~~ tcp_rtt.c:24:25: error: unused variable 'info' [-Werror=unused-variable] cc1: all warnings being treated as errors Fixes: 1f4f80fed217 ("selftests/bpf: test_progs: convert test_tcp_rtt") Signed-off-by: Tony Ambardar Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/f2329767b15df206f08a5776d35a47c37da855ae.1721713597.git.tony.ambardar@gmail.com Signed-off-by: Sasha Levin commit a620219bdd8c5289b08ef9f59981ba57d9d0dcbc Author: Tony Ambardar Date: Mon Jul 22 22:54:40 2024 -0700 selftests/bpf: Fix compiling flow_dissector.c with musl-libc [ Upstream commit 5e4c43bcb85973243d7274e0058b6e8f5810e4f7 ] The GNU version of 'struct tcphdr' has members 'doff', 'source' and 'dest', which are not exposed by musl libc headers unless _GNU_SOURCE is defined. Add this definition to fix errors seen compiling for mips64el/musl-libc: flow_dissector.c:118:30: error: 'struct tcphdr' has no member named 'doff' 118 | .tcp.doff = 5, | ^~~~ flow_dissector.c:119:30: error: 'struct tcphdr' has no member named 'source' 119 | .tcp.source = 80, | ^~~~~~ flow_dissector.c:120:30: error: 'struct tcphdr' has no member named 'dest' 120 | .tcp.dest = 8080, | ^~~~ Fixes: ae173a915785 ("selftests/bpf: support BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG") Signed-off-by: Tony Ambardar Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/8f7ab21a73f678f9cebd32b26c444a686e57414d.1721713597.git.tony.ambardar@gmail.com Signed-off-by: Sasha Levin commit dc5f75f3c3e8932ad77a3e4179e96392de372a8c Author: Tony Ambardar Date: Mon Jul 22 22:54:29 2024 -0700 selftests/bpf: Fix compile error from rlim_t in sk_storage_map.c [ Upstream commit d393f9479d4aaab0fa4c3caf513f28685e831f13 ] Cast 'rlim_t' argument to match expected type of printf() format and avoid compile errors seen building for mips64el/musl-libc: In file included from map_tests/sk_storage_map.c:20: map_tests/sk_storage_map.c: In function 'test_sk_storage_map_stress_free': map_tests/sk_storage_map.c:414:56: error: format '%lu' expects argument of type 'long unsigned int', but argument 2 has type 'rlim_t' {aka 'long long unsigned int'} [-Werror=format=] 414 | CHECK(err, "setrlimit(RLIMIT_NOFILE)", "rlim_new:%lu errno:%d", | ^~~~~~~~~~~~~~~~~~~~~~~ 415 | rlim_new.rlim_cur, errno); | ~~~~~~~~~~~~~~~~~ | | | rlim_t {aka long long unsigned int} ./test_maps.h:12:24: note: in definition of macro 'CHECK' 12 | printf(format); \ | ^~~~~~ map_tests/sk_storage_map.c:414:68: note: format string is defined here 414 | CHECK(err, "setrlimit(RLIMIT_NOFILE)", "rlim_new:%lu errno:%d", | ~~^ | | | long unsigned int | %llu cc1: all warnings being treated as errors Fixes: 51a0e301a563 ("bpf: Add BPF_MAP_TYPE_SK_STORAGE test to test_maps") Signed-off-by: Tony Ambardar Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/1e00a1fa7acf91b4ca135c4102dc796d518bad86.1721713597.git.tony.ambardar@gmail.com Signed-off-by: Sasha Levin commit 87e8134c18977b566f4ec248c8a147244da69402 Author: Jonathan McDowell Date: Fri Aug 16 12:55:46 2024 +0100 tpm: Clean up TPM space after command failure [ Upstream commit e3aaebcbb7c6b403416f442d1de70d437ce313a7 ] tpm_dev_transmit prepares the TPM space before attempting command transmission. However if the command fails no rollback of this preparation is done. This can result in transient handles being leaked if the device is subsequently closed with no further commands performed. Fix this by flushing the space in the event of command transmission failure. Fixes: 745b361e989a ("tpm: infrastructure for TPM spaces") Signed-off-by: Jonathan McDowell Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin commit 5df29a445f3a3b0b91cf843f4253f9e314f71168 Author: Juergen Gross Date: Fri Sep 13 12:05:02 2024 +0200 xen/swiotlb: add alignment check for dma buffers [ Upstream commit 9f40ec84a7976d95c34e7cc070939deb103652b0 ] When checking a memory buffer to be consecutive in machine memory, the alignment needs to be checked, too. Failing to do so might result in DMA memory not being aligned according to its requested size, leading to error messages like: 4xxx 0000:2b:00.0: enabling device (0140 -> 0142) 4xxx 0000:2b:00.0: Ring address not aligned 4xxx 0000:2b:00.0: Failed to initialise service qat_crypto 4xxx 0000:2b:00.0: Resetting device qat_dev0 4xxx: probe of 0000:2b:00.0 failed with error -14 Fixes: 9435cce87950 ("xen/swiotlb: Add support for 64KB page granularity") Signed-off-by: Juergen Gross Reviewed-by: Stefano Stabellini Signed-off-by: Juergen Gross Signed-off-by: Sasha Levin commit c87b0349f1d8d7b43cf77a81922cbe8a6fa6045c Author: Juergen Gross Date: Sat Aug 3 08:01:22 2024 +0200 xen: use correct end address of kernel for conflict checking [ Upstream commit fac1bceeeb04886fc2ee952672e6e6c85ce41dca ] When running as a Xen PV dom0 the kernel is loaded by the hypervisor using a different memory map than that of the host. In order to minimize the required changes in the kernel, the kernel adapts its memory map to that of the host. In order to do that it is checking for conflicts of its load address with the host memory map. Unfortunately the tested memory range does not include the .brk area, which might result in crashes or memory corruption when this area does conflict with the memory map of the host. Fix the test by using the _end label instead of __bss_stop. Fixes: 808fdb71936c ("xen: check for kernel memory conflicting with memory layout") Signed-off-by: Juergen Gross Tested-by: Marek Marczykowski-Górecki Reviewed-by: Jan Beulich Signed-off-by: Juergen Gross Signed-off-by: Sasha Levin commit 4dac65dadc76f8fae9ce94ae9bfd49d6220863a7 Author: Yuesong Li Date: Thu Aug 22 17:09:27 2024 +0800 drivers:drm:exynos_drm_gsc:Fix wrong assignment in gsc_bind() [ Upstream commit 94ebc3d3235c5c516f67315059ce657e5090e94b ] cocci reported a double assignment problem. Upon reviewing previous commits, it appears this may actually be an incorrect assignment. Fixes: 8b9550344d39 ("drm/ipp: clean up debug messages") Signed-off-by: Yuesong Li Signed-off-by: Inki Dae Signed-off-by: Sasha Levin commit 5c9a3510c843cd05632e8d24ed52fe59e4ae71bf Author: Sherry Yang Date: Tue Aug 27 09:53:37 2024 -0700 drm/msm: fix %s null argument error [ Upstream commit 25b85075150fe8adddb096db8a4b950353045ee1 ] The following build error was triggered because of NULL string argument: BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c: In function 'mdp5_smp_dump': BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c:352:51: error: '%s' directive argument is null [-Werror=format-overflow=] BUILDSTDERR: 352 | drm_printf(p, "%s:%d\t%d\t%s\n", BUILDSTDERR: | ^~ BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c:352:51: error: '%s' directive argument is null [-Werror=format-overflow=] This happens from the commit a61ddb4393ad ("drm: enable (most) W=1 warnings by default across the subsystem"). Using "(null)" instead to fix it. Fixes: bc5289eed481 ("drm/msm/mdp5: add debugfs to show smp block status") Signed-off-by: Sherry Yang Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/611071/ Link: https://lore.kernel.org/r/20240827165337.1075904-1-sherry.yang@oracle.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin commit 5434fdccab3a41fb67edce7ad1ad9be675ea4436 Author: Wolfram Sang Date: Sun Sep 1 11:02:11 2024 +0200 ipmi: docs: don't advertise deprecated sysfs entries [ Upstream commit 64dce81f8c373c681e62d5ffe0397c45a35d48a2 ] "i2c-adapter" class entries are deprecated since 2009. Switch to the proper location. Reported-by: Heiner Kallweit Closes: https://lore.kernel.org/r/80c4a898-5867-4162-ac85-bdf7c7c68746@gmail.com Fixes: 259307074bfc ("ipmi: Add SMBus interface driver (SSIF)") Signed-off-by: Wolfram Sang Message-Id: <20240901090211.3797-2-wsa+renesas@sang-engineering.com> Signed-off-by: Corey Minyard Signed-off-by: Sasha Levin commit 9bcf5687fe1dddfd7ef7be5e61f845331f50e623 Author: Vladimir Lypak Date: Sun Sep 1 13:54:02 2024 +0000 drm/msm/a5xx: fix races in preemption evaluation stage [ Upstream commit ce050f307ad93bcc5958d0dd35fc276fd394d274 ] On A5XX GPUs when preemption is used it's invietable to enter a soft lock-up state in which GPU is stuck at empty ring-buffer doing nothing. This appears as full UI lockup and not detected as GPU hang (because it's not). This happens due to not triggering preemption when it was needed. Sometimes this state can be recovered by some new submit but generally it won't happen because applications are waiting for old submits to retire. One of the reasons why this happens is a race between a5xx_submit and a5xx_preempt_trigger called from IRQ during submit retire. Former thread updates ring->cur of previously empty and not current ring right after latter checks it for emptiness. Then both threads can just exit because for first one preempt_state wasn't NONE yet and for second one all rings appeared to be empty. To prevent such situations from happening we need to establish guarantee for preempt_trigger to make decision after each submit or retire. To implement this we serialize preemption initiation using spinlock. If switch is already in progress we need to re-trigger preemption when it finishes. Fixes: b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets") Signed-off-by: Vladimir Lypak Patchwork: https://patchwork.freedesktop.org/patch/612045/ Signed-off-by: Rob Clark Signed-off-by: Sasha Levin commit 637823ff5e09aa410dc6eabb84090b3937305aef Author: Vladimir Lypak Date: Sun Sep 1 13:54:01 2024 +0000 drm/msm/a5xx: properly clear preemption records on resume [ Upstream commit 64fd6d01a52904bdbda0ce810a45a428c995a4ca ] Two fields of preempt_record which are used by CP aren't reset on resume: "data" and "info". This is the reason behind faults which happen when we try to switch to the ring that was active last before suspend. In addition those faults can't be recovered from because we use suspend and resume to do so (keeping values of those fields again). Fixes: b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets") Signed-off-by: Vladimir Lypak Reviewed-by: Konrad Dybcio Patchwork: https://patchwork.freedesktop.org/patch/612043/ Signed-off-by: Rob Clark Signed-off-by: Sasha Levin commit 1299487518eb42d7201ead15d80dfaa67e79ed7e Author: Vladimir Lypak Date: Sun Sep 1 13:54:00 2024 +0000 drm/msm/a5xx: disable preemption in submits by default [ Upstream commit db9dec2db76146d65e1cfbb6afb2e2bd5dab67f8 ] Fine grain preemption (switching from/to points within submits) requires extra handling in command stream of those submits, especially when rendering with tiling (using GMEM). However this handling is missing at this point in mesa (and always was). For this reason we get random GPU faults and hangs if more than one priority level is used because local preemption is enabled prior to executing command stream from submit. With that said it was ahead of time to enable local preemption by default considering the fact that even on downstream kernel it is only enabled if requested via UAPI. Fixes: a7a4c19c36de ("drm/msm/a5xx: fix setting of the CP_PREEMPT_ENABLE_LOCAL register") Signed-off-by: Vladimir Lypak Patchwork: https://patchwork.freedesktop.org/patch/612041/ Signed-off-by: Rob Clark Signed-off-by: Sasha Levin commit df8e4cf27ba8e4dabbd982e812d180438956d030 Author: Aleksandr Mishin Date: Fri Jul 5 12:13:12 2024 +0300 drm/msm: Fix incorrect file name output in adreno_request_fw() [ Upstream commit e19366911340c2313a1abbb09c54eaf9bdea4f58 ] In adreno_request_fw() when debugging information is printed to the log after firmware load, an incorrect filename is printed. 'newname' is used instead of 'fwname', so prefix "qcom/" is being added to filename. Looks like "copy-paste" mistake. Fix this mistake by replacing 'newname' with 'fwname'. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 2c41ef1b6f7d ("drm/msm/adreno: deal with linux-firmware fw paths") Signed-off-by: Aleksandr Mishin Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/602382/ Signed-off-by: Rob Clark Signed-off-by: Sasha Levin commit 5ad6284c8d433f8a213111c5c44ead4d9705b622 Author: Jeongjun Park Date: Mon Aug 19 13:05:46 2024 +0900 jfs: fix out-of-bounds in dbNextAG() and diAlloc() [ Upstream commit e63866a475562810500ea7f784099bfe341e761a ] In dbNextAG() , there is no check for the case where bmp->db_numag is greater or same than MAXAG due to a polluted image, which causes an out-of-bounds. Therefore, a bounds check should be added in dbMount(). And in dbNextAG(), a check for the case where agpref is greater than bmp->db_numag should be added, so an out-of-bounds exception should be prevented. Additionally, a check for the case where agno is greater or same than MAXAG should be added in diAlloc() to prevent out-of-bounds. Reported-by: Jeongjun Park Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jeongjun Park Signed-off-by: Dave Kleikamp Signed-off-by: Sasha Levin commit 41a3ed4182d01a93bd8b0f6cfe70d94656db087a Author: Nikita Zhandarovich Date: Tue Aug 6 10:19:04 2024 -0700 drm/radeon/evergreen_cs: fix int overflow errors in cs track offsets [ Upstream commit 3fbaf475a5b8361ebee7da18964db809e37518b7 ] Several cs track offsets (such as 'track->db_s_read_offset') either are initialized with or plainly take big enough values that, once shifted 8 bits left, may be hit with integer overflow if the resulting values end up going over u32 limit. Same goes for a few instances of 'surf.layer_size * mslice' multiplications that are added to 'offset' variable - they may potentially overflow as well and need to be validated properly. While some debug prints in this code section take possible overflow issues into account, simply casting to (unsigned long) may be erroneous in its own way, as depending on CPU architecture one is liable to get different results. Fix said problems by: - casting 'offset' to fixed u64 data type instead of ambiguous unsigned long. - casting one of the operands in vulnerable to integer overflow cases to u64. - adjust format specifiers in debug prints to properly represent 'offset' values. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 285484e2d55e ("drm/radeon: add support for evergreen/ni tiling informations v11") Signed-off-by: Nikita Zhandarovich Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 2ee92b995e4e723ab9e75612e40e53f13cd00420 Author: Jonas Karlman Date: Sat Jun 15 17:03:55 2024 +0000 drm/rockchip: dw_hdmi: Fix reading EDID when using a forced mode [ Upstream commit a5d024541ec466f428e6c514577d511a40779c7b ] EDID cannot be read on RK3328 until after read_hpd has been called and correct io voltage has been configured based on connection status. When a forced mode is used, e.g. video=1920x1080@60e, the connector detect ops, that in turn normally calls the read_hpd, never gets called. This result in reading EDID to fail in connector get_modes ops. Call dw_hdmi_rk3328_read_hpd at end of dw_hdmi_rk3328_setup_hpd to correct io voltage and allow reading EDID after setup_hpd. Fixes: 1c53ba8f22a1 ("drm/rockchip: dw_hdmi: add dw-hdmi support for the rk3328") Signed-off-by: Jonas Karlman Signed-off-by: Heiko Stuebner Link: https://patchwork.freedesktop.org/patch/msgid/20240615170417.3134517-5-jonas@kwiboo.se Signed-off-by: Sasha Levin commit 20878dec6d9150088ce2d902c27ad33a84edf393 Author: Alex Bee Date: Sat Jun 15 17:03:54 2024 +0000 drm/rockchip: vop: Allow 4096px width scaling [ Upstream commit 0ef968d91a20b5da581839f093f98f7a03a804f7 ] There is no reason to limit VOP scaling to 3840px width, the limit of RK3288, when there are newer VOP versions that support 4096px width. Change to enforce a maximum of 4096px width plane scaling, the maximum supported output width of the VOP versions supported by this driver. Fixes: 4c156c21c794 ("drm/rockchip: vop: support plane scale") Signed-off-by: Alex Bee Signed-off-by: Jonas Karlman Signed-off-by: Heiko Stuebner Link: https://patchwork.freedesktop.org/patch/msgid/20240615170417.3134517-4-jonas@kwiboo.se Signed-off-by: Sasha Levin commit 746e3b6f2574fa6bbcc034f686f3a62b73e74e64 Author: Alex Deucher Date: Tue Jul 23 13:31:58 2024 -0400 drm/radeon: properly handle vbios fake edid sizing [ Upstream commit 17c6baff3d5f65c8da164137a58742541a060b2f ] The comment in the vbios structure says: // = 128 means EDID length is 128 bytes, otherwise the EDID length = ucFakeEDIDLength*128 This fake edid struct has not been used in a long time, so I'm not sure if there were actually any boards out there with a non-128 byte EDID, but align the code with the comment. Reviewed-by: Thomas Weißschuh Reported-by: Thomas Weißschuh Link: https://lists.freedesktop.org/archives/amd-gfx/2024-June/109964.html Fixes: c324acd5032f ("drm/radeon/kms: parse the extended LCD info block") Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 4477639573282ea90195a5e12bb671fd8afe3da3 Author: Paulo Miguel Almeida Date: Sat Oct 29 16:32:05 2022 +1300 drm/radeon: Replace one-element array with flexible-array member [ Upstream commit c81c5bd5cf2f428867e0bcfcccd4e4d2f8c68f51 ] One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in struct _ATOM_FAKE_EDID_PATCH_RECORD and refactor the rest of the code accordingly. It's worth mentioning that doing a build before/after this patch results in no binary output differences. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/239 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1] Reviewed-by: Kees Cook Signed-off-by: Paulo Miguel Almeida Signed-off-by: Alex Deucher Stable-dep-of: 17c6baff3d5f ("drm/radeon: properly handle vbios fake edid sizing") Signed-off-by: Sasha Levin commit 4209b70feab6a67575561f301bc694005091c15a Author: Alex Deucher Date: Tue Jul 23 13:23:56 2024 -0400 drm/amdgpu: properly handle vbios fake edid sizing [ Upstream commit 8155566a26b8d6c1dd914f06a0c652e4e2f2adf1 ] The comment in the vbios structure says: // = 128 means EDID length is 128 bytes, otherwise the EDID length = ucFakeEDIDLength*128 This fake edid struct has not been used in a long time, so I'm not sure if there were actually any boards out there with a non-128 byte EDID, but align the code with the comment. Reviewed-by: Thomas Weißschuh Reported-by: Thomas Weißschuh Link: https://lists.freedesktop.org/archives/amd-gfx/2024-June/109964.html Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)") Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 24f4bdf1c8bfcbc08934630f972e52362222dd97 Author: Paulo Miguel Almeida Date: Sat Oct 29 14:30:44 2022 +1300 drm/amdgpu: Replace one-element array with flexible-array member [ Upstream commit 320e2590e281d0a7865e861f50155b5b435e9813 ] One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in struct _ATOM_FAKE_EDID_PATCH_RECORD and refactor the rest of the code accordingly. Important to mention is that doing a build before/after this patch results in no binary output differences. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/238 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1] Signed-off-by: Paulo Miguel Almeida Signed-off-by: Alex Deucher Stable-dep-of: 8155566a26b8 ("drm/amdgpu: properly handle vbios fake edid sizing") Signed-off-by: Sasha Levin commit ba2310096e6574000109bd0f1adc3e8885c18301 Author: Christophe JAILLET Date: Sat Jan 6 17:54:32 2024 +0100 drm/stm: Fix an error handling path in stm_drm_platform_probe() [ Upstream commit ce7c90bfda2656418c69ba0dd8f8a7536b8928d4 ] If drm_dev_register() fails, a call to drv_load() must be undone, as already done in the remove function. Fixes: b759012c5fa7 ("drm/stm: Add STM32 LTDC driver") Signed-off-by: Christophe JAILLET Acked-by: Raphael Gallais-Pou Link: https://patchwork.freedesktop.org/patch/msgid/20fff7f853f20a48a96db8ff186124470ec4d976.1704560028.git.christophe.jaillet@wanadoo.fr Signed-off-by: Raphael Gallais-Pou Signed-off-by: Sasha Levin commit c3c9c5daea11ff7d5c857e89a4ebf6182e4dd884 Author: Charles Han Date: Wed Aug 28 17:24:27 2024 +0800 mtd: powernv: Add check devm_kasprintf() returned value [ Upstream commit 395999829880a106bb95f0ce34e6e4c2b43c6a5d ] devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fixes: acfe63ec1c59 ("mtd: Convert to using %pOFn instead of device_node.name") Signed-off-by: Charles Han Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20240828092427.128177-1-hanchunchao@inspur.com Signed-off-by: Sasha Levin commit bb8e820cf6ba148e52a60053e4c8724018c1a51b Author: Christophe JAILLET Date: Thu Aug 1 22:34:39 2024 +0200 fbdev: hpfb: Fix an error handling path in hpfb_dio_probe() [ Upstream commit aa578e897520f32ae12bec487f2474357d01ca9c ] If an error occurs after request_mem_region(), a corresponding release_mem_region() should be called, as already done in the remove function. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Christophe JAILLET Signed-off-by: Helge Deller Signed-off-by: Sasha Levin commit 65af6f4a72c6f2a5ba12eb5197846da79f30b6b6 Author: Artur Weber Date: Sat Aug 17 12:51:14 2024 +0200 power: supply: max17042_battery: Fix SOC threshold calc w/ no current sense [ Upstream commit 3a3acf839b2cedf092bdd1ff65b0e9895df1656b ] Commit 223a3b82834f ("power: supply: max17042_battery: use VFSOC for capacity when no rsns") made it so that capacity on systems without current sensing would be read from VFSOC instead of RepSOC. However, the SOC threshold calculation still read RepSOC to get the SOC regardless of the current sensing option state. Fix this by applying the same conditional to determine which register should be read. This also seems to be the intended behavior as per the datasheet - SOC alert config value in MiscCFG on setups without current sensing is set to a value of 0b11, indicating SOC alerts being generated based on VFSOC, instead of 0b00 which indicates SOC alerts being generated based on RepSOC. This fixes an issue on the Galaxy S3/Midas boards, where the alert interrupt would be constantly retriggered, causing high CPU usage on idle (around ~12%-15%). Fixes: e5f3872d2044 ("max17042: Add support for signalling change in SOC") Signed-off-by: Artur Weber Reviewed-by: Henrik Grimler Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240817-max17042-soc-threshold-fix-v1-1-72b45899c3cc@gmail.com Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin commit 575ea801cc230cb0bf6d460c55235355815b03c4 Author: Chris Morgan Date: Wed Aug 21 16:54:43 2024 -0500 power: supply: axp20x_battery: Remove design from min and max voltage [ Upstream commit 61978807b00f8a1817b0e5580981af1cd2f428a5 ] The POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN and POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN values should be immutable properties of the battery, but for this driver they are writable values and used as the minimum and maximum values for charging. Remove the DESIGN designation from these values. Fixes: 46c202b5f25f ("power: supply: add battery driver for AXP20X and AXP22X PMICs") Suggested-by: Chen-Yu Tsai Signed-off-by: Chris Morgan Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240821215456.962564-3-macroalpha82@gmail.com Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin commit 206734f55745e43f9aaf5d24075acf4b8127ff73 Author: Hermann Lauer Date: Wed May 12 12:58:56 2021 +0200 power: supply: axp20x_battery: allow disabling battery charging [ Upstream commit 6a0fcc87c9e35191d37a8819fdab9d30e523515b ] Allow disabling and re-enabling battery charging of an axp209 PMIC through a writable status property. With the current driver code charging is always on. This works on the axp209 of Banana {Pi M1+,Pro} and should work on all AXP chips. Signed-off-by: Hermann.Lauer@uni-heidelberg.de Signed-off-by: Sebastian Reichel Stable-dep-of: 61978807b00f ("power: supply: axp20x_battery: Remove design from min and max voltage") Signed-off-by: Sasha Levin commit 1d8d2a0312d77381d21433ef3a9e863139cdc3a2 Author: Yuntao Liu Date: Thu Aug 15 08:30:21 2024 +0000 hwmon: (ntc_thermistor) fix module autoloading [ Upstream commit b6964d66a07a9003868e428a956949e17ab44d7e ] Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Fixes: 9e8269de100d ("hwmon: (ntc_thermistor) Add DT with IIO support to NTC thermistor driver") Signed-off-by: Yuntao Liu Message-ID: <20240815083021.756134-1-liuyuntao12@huawei.com> Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 31bd8df7553f6587704002024da9c7cd69c5cceb Author: Mirsad Todorovac Date: Fri Jul 12 01:43:20 2024 +0200 mtd: slram: insert break after errors in parsing the map [ Upstream commit 336c218dd7f0588ed8a7345f367975a00a4f003f ] GCC 12.3.0 compiler on linux-next next-20240709 tree found the execution path in which, due to lazy evaluation, devlength isn't initialised with the parsed string: 289 while (map) { 290 devname = devstart = devlength = NULL; 291 292 if (!(devname = strsep(&map, ","))) { 293 E("slram: No devicename specified.\n"); 294 break; 295 } 296 T("slram: devname = %s\n", devname); 297 if ((!map) || (!(devstart = strsep(&map, ",")))) { 298 E("slram: No devicestart specified.\n"); 299 } 300 T("slram: devstart = %s\n", devstart); → 301 if ((!map) || (!(devlength = strsep(&map, ",")))) { 302 E("slram: No devicelength / -end specified.\n"); 303 } → 304 T("slram: devlength = %s\n", devlength); 305 if (parse_cmdline(devname, devstart, devlength) != 0) { 306 return(-EINVAL); 307 } Parsing should be finished after map == NULL, so a break is best inserted after each E("slram: ... \n") error message. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: Miquel Raynal Cc: Richard Weinberger Cc: Vignesh Raghavendra Cc: linux-mtd@lists.infradead.org Signed-off-by: Mirsad Todorovac Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20240711234319.637824-1-mtodorovac69@gmail.com Signed-off-by: Sasha Levin commit ce56acc0e2c01a42b1461cc70afd7a77d5fb7c19 Author: Guenter Roeck Date: Thu Jul 18 09:52:01 2024 -0700 hwmon: (max16065) Fix overflows seen when writing limits [ Upstream commit 744ec4477b11c42e2c8de9eb8364675ae7a0bd81 ] Writing large limits resulted in overflows as reported by module tests. in0_lcrit: Suspected overflow: [max=5538, read 0, written 2147483647] in0_crit: Suspected overflow: [max=5538, read 0, written 2147483647] in0_min: Suspected overflow: [max=5538, read 0, written 2147483647] Fix the problem by clamping prior to multiplications and the use of DIV_ROUND_CLOSEST, and by using consistent variable types. Reviewed-by: Tzung-Bi Shih Fixes: f5bae2642e3d ("hwmon: Driver for MAX16065 System Manager and compatibles") Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 06ca666a2e8151fca362a820262c00c390159263 Author: Ankit Agrawal Date: Sat Jul 13 15:27:13 2024 +0530 clocksource/drivers/qcom: Add missing iounmap() on errors in msm_dt_timer_init() [ Upstream commit ca140a0dc0a18acd4653b56db211fec9b2339986 ] Add the missing iounmap() when clock frequency fails to get read by the of_property_read_u32() call, or if the call to msm_timer_init() fails. Fixes: 6e3321631ac2 ("ARM: msm: Add DT support to msm_timer") Signed-off-by: Ankit Agrawal Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20240713095713.GA430091@bnew-VirtualBox Signed-off-by: Daniel Lezcano Signed-off-by: Sasha Levin commit e8384befe248764d7a25c4718aeaf94318e05e59 Author: Krzysztof Kozlowski Date: Sun Aug 25 16:14:24 2024 +0200 reset: berlin: fix OF node leak in probe() error path [ Upstream commit 5f58a88cc91075be38cec69b7cb70aaa4ba69e8b ] Driver is leaking OF node reference on memory allocation failure. Acquire the OF node reference after memory allocation to fix this and keep it simple. Fixes: aed6f3cadc86 ("reset: berlin: convert to a platform driver") Signed-off-by: Krzysztof Kozlowski Reviewed-by: Damien Le Moal Link: https://lore.kernel.org/r/20240825-reset-cleanup-scoped-v1-1-03f6d834f8c0@linaro.org Signed-off-by: Philipp Zabel Signed-off-by: Sasha Levin commit 1f578d2118217cc369cb989a39ffeddb499696bc Author: Krzysztof Kozlowski Date: Mon Aug 26 07:49:33 2024 +0200 ARM: versatile: fix OF node leak in CPUs prepare [ Upstream commit f2642d97f2105ed17b2ece0c597450f2ff95d704 ] Machine code is leaking OF node reference from of_find_matching_node() in realview_smp_prepare_cpus(). Fixes: 5420b4b15617 ("ARM: realview: add an DT SMP boot method") Signed-off-by: Krzysztof Kozlowski Acked-by: Liviu Dudau Link: https://lore.kernel.org/20240826054934.10724-1-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin commit d3a63fa27fa0c89fc4dc851b34d34a08cb780ac5 Author: Krzysztof Kozlowski Date: Wed Aug 28 11:56:36 2024 +0200 ARM: dts: imx7d-zii-rmu2: fix Ethernet PHY pinctrl property [ Upstream commit 0e49cfe364dea4345551516eb2fe53135a10432b ] There is no "fsl,phy" property in pin controller pincfg nodes: imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,pins' is a required property imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,phy' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: f496e6750083 ("ARM: dts: Add ZII support for ZII i.MX7 RMU2 board") Signed-off-by: Krzysztof Kozlowski Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin commit 2d98263d5c3387f154cc334fa8441d1328917a24 Author: Andy Shevchenko Date: Wed Aug 14 17:45:12 2024 +0300 spi: ppc4xx: Avoid returning 0 when failed to parse and map IRQ [ Upstream commit 7781f1d120fec8624fc654eda900fc8748262082 ] 0 is incorrect error code when failed to parse and map IRQ. Replace OF specific old API for IRQ retrieval with a generic one to fix this issue. Fixes: 0f245463b01e ("spi: ppc4xx: handle irq_of_parse_and_map() errors") Signed-off-by: Andy Shevchenko Link: https://patch.msgid.link/20240814144525.2648450-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit dab6520643c28065ac91e1359ab324df6e9d8b60 Author: Ma Ke Date: Wed Jul 24 16:40:47 2024 +0800 spi: ppc4xx: handle irq_of_parse_and_map() errors [ Upstream commit 0f245463b01ea254ae90e1d0389e90b0e7d8dc75 ] Zero and negative number is not a valid IRQ for in-kernel code and the irq_of_parse_and_map() function returns zero on error. So this check for valid IRQs should only accept values > 0. Fixes: 44dab88e7cc9 ("spi: add spi_ppc4xx driver") Signed-off-by: Ma Ke Link: https://patch.msgid.link/20240724084047.1506084-1-make24@iscas.ac.cn Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 3a5f45a4ad4e1fd36b0a998eef03d76a4f02a2a8 Author: Yu Kuai Date: Mon Sep 2 21:03:28 2024 +0800 block, bfq: don't break merge chain in bfq_split_bfqq() [ Upstream commit 42c306ed723321af4003b2a41bb73728cab54f85 ] Consider the following scenario: Process 1 Process 2 Process 3 Process 4 (BIC1) (BIC2) (BIC3) (BIC4) Λ | | | \-------------\ \-------------\ \--------------\| V V V bfqq1--------->bfqq2---------->bfqq3----------->bfqq4 ref 0 1 2 4 If Process 1 issue a new IO and bfqq2 is found, and then bfq_init_rq() decide to spilt bfqq2 by bfq_split_bfqq(). Howerver, procress reference of bfqq2 is 1 and bfq_split_bfqq() just clear the coop flag, which will break the merge chain. Expected result: caller will allocate a new bfqq for BIC1 Process 1 Process 2 Process 3 Process 4 (BIC1) (BIC2) (BIC3) (BIC4) | | | \-------------\ \--------------\| V V bfqq1--------->bfqq2---------->bfqq3----------->bfqq4 ref 0 0 1 3 Since the condition is only used for the last bfqq4 when the previous bfqq2 and bfqq3 are already splited. Fix the problem by checking if bfqq is the last one in the merge chain as well. Fixes: 36eca8948323 ("block, bfq: add Early Queue Merge (EQM)") Signed-off-by: Yu Kuai Link: https://lore.kernel.org/r/20240902130329.3787024-4-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 140c8e2caa34b07e067c3a296d1ef81571346170 Author: Yu Kuai Date: Mon Sep 2 21:03:27 2024 +0800 block, bfq: choose the last bfqq from merge chain in bfq_setup_cooperator() [ Upstream commit 0e456dba86c7f9a19792204a044835f1ca2c8dbb ] Consider the following merge chain: Process 1 Process 2 Process 3 Process 4 (BIC1) (BIC2) (BIC3) (BIC4) Λ | | | \--------------\ \-------------\ \-------------\| V V V bfqq1--------->bfqq2---------->bfqq3----------->bfqq4 IO from Process 1 will get bfqf2 from BIC1 first, then bfq_setup_cooperator() will found bfqq2 already merged to bfqq3 and then handle this IO from bfqq3. However, the merge chain can be much deeper and bfqq3 can be merged to other bfqq as well. Fix this problem by iterating to the last bfqq in bfq_setup_cooperator(). Fixes: 36eca8948323 ("block, bfq: add Early Queue Merge (EQM)") Signed-off-by: Yu Kuai Link: https://lore.kernel.org/r/20240902130329.3787024-3-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit bc2140534b2aae752e4f7cb4489642dbb5ec4777 Author: Yu Kuai Date: Mon Sep 2 21:03:26 2024 +0800 block, bfq: fix possible UAF for bfqq->bic with merge chain [ Upstream commit 18ad4df091dd5d067d2faa8fce1180b79f7041a7 ] 1) initial state, three tasks: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | Λ | Λ | Λ | | | | | | V | V | V | bfqq1 bfqq2 bfqq3 process ref: 1 1 1 2) bfqq1 merged to bfqq2: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | | | Λ \--------------\| | | V V | bfqq1--------->bfqq2 bfqq3 process ref: 0 2 1 3) bfqq2 merged to bfqq3: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) here -> Λ | | \--------------\ \-------------\| V V bfqq1--------->bfqq2---------->bfqq3 process ref: 0 1 3 In this case, IO from Process 1 will get bfqq2 from BIC1 first, and then get bfqq3 through merge chain, and finially handle IO by bfqq3. Howerver, current code will think bfqq2 is owned by BIC1, like initial state, and set bfqq2->bic to BIC1. bfq_insert_request -> by Process 1 bfqq = bfq_init_rq(rq) bfqq = bfq_get_bfqq_handle_split bfqq = bic_to_bfqq -> get bfqq2 from BIC1 bfqq->ref++ rq->elv.priv[0] = bic rq->elv.priv[1] = bfqq if (bfqq_process_refs(bfqq) == 1) bfqq->bic = bic -> record BIC1 to bfqq2 __bfq_insert_request new_bfqq = bfq_setup_cooperator -> get bfqq3 from bfqq2->new_bfqq bfqq_request_freed(bfqq) new_bfqq->ref++ rq->elv.priv[1] = new_bfqq -> handle IO by bfqq3 Fix the problem by checking bfqq is from merge chain fist. And this might fix a following problem reported by our syzkaller(unreproducible): ================================================================== BUG: KASAN: slab-use-after-free in bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] BUG: KASAN: slab-use-after-free in bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] BUG: KASAN: slab-use-after-free in bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 Write of size 1 at addr ffff888123839eb8 by task kworker/0:1H/18595 CPU: 0 PID: 18595 Comm: kworker/0:1H Tainted: G L 6.6.0-07439-gba2303cacfda #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: kblockd blk_mq_requeue_work Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0x10d/0x610 mm/kasan/report.c:475 kasan_report+0x8e/0xc0 mm/kasan/report.c:588 bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 bfq_get_bfqq_handle_split+0x169/0x5d0 block/bfq-iosched.c:6757 bfq_init_rq block/bfq-iosched.c:6876 [inline] bfq_insert_request block/bfq-iosched.c:6254 [inline] bfq_insert_requests+0x1112/0x5cf0 block/bfq-iosched.c:6304 blk_mq_insert_request+0x290/0x8d0 block/blk-mq.c:2593 blk_mq_requeue_work+0x6bc/0xa70 block/blk-mq.c:1502 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 Allocated by task 20776: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x87/0x90 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3458 [inline] kmem_cache_alloc_node+0x1a4/0x6f0 mm/slub.c:3503 ioc_create_icq block/blk-ioc.c:370 [inline] ioc_find_get_icq+0x180/0xaa0 block/blk-ioc.c:436 bfq_prepare_request+0x39/0xf0 block/bfq-iosched.c:6812 blk_mq_rq_ctx_init.isra.7+0x6ac/0xa00 block/blk-mq.c:403 __blk_mq_alloc_requests+0xcc0/0x1070 block/blk-mq.c:517 blk_mq_get_new_requests block/blk-mq.c:2940 [inline] blk_mq_submit_bio+0x624/0x27c0 block/blk-mq.c:3042 __submit_bio+0x331/0x6f0 block/blk-core.c:624 __submit_bio_noacct_mq block/blk-core.c:703 [inline] submit_bio_noacct_nocheck+0x816/0xb40 block/blk-core.c:732 submit_bio_noacct+0x7a6/0x1b50 block/blk-core.c:826 xlog_write_iclog+0x7d5/0xa00 fs/xfs/xfs_log.c:1958 xlog_state_release_iclog+0x3b8/0x720 fs/xfs/xfs_log.c:619 xlog_cil_push_work+0x19c5/0x2270 fs/xfs/xfs_log_cil.c:1330 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 Freed by task 946: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x50 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] __kasan_slab_free+0x12c/0x1c0 mm/kasan/common.c:244 kasan_slab_free include/linux/kasan.h:164 [inline] slab_free_hook mm/slub.c:1815 [inline] slab_free_freelist_hook mm/slub.c:1841 [inline] slab_free mm/slub.c:3786 [inline] kmem_cache_free+0x118/0x6f0 mm/slub.c:3808 rcu_do_batch+0x35c/0xe30 kernel/rcu/tree.c:2189 rcu_core+0x819/0xd90 kernel/rcu/tree.c:2462 __do_softirq+0x1b0/0x7a2 kernel/softirq.c:553 Last potentially related work creation: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 __kasan_record_aux_stack+0xaf/0xc0 mm/kasan/generic.c:492 __call_rcu_common kernel/rcu/tree.c:2712 [inline] call_rcu+0xce/0x1020 kernel/rcu/tree.c:2826 ioc_destroy_icq+0x54c/0x830 block/blk-ioc.c:105 ioc_release_fn+0xf0/0x360 block/blk-ioc.c:124 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 Second to last potentially related work creation: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 __kasan_record_aux_stack+0xaf/0xc0 mm/kasan/generic.c:492 __call_rcu_common kernel/rcu/tree.c:2712 [inline] call_rcu+0xce/0x1020 kernel/rcu/tree.c:2826 ioc_destroy_icq+0x54c/0x830 block/blk-ioc.c:105 ioc_release_fn+0xf0/0x360 block/blk-ioc.c:124 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 The buggy address belongs to the object at ffff888123839d68 which belongs to the cache bfq_io_cq of size 1360 The buggy address is located 336 bytes inside of freed 1360-byte region [ffff888123839d68, ffff88812383a2b8) The buggy address belongs to the physical page: page:ffffea00048e0e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88812383f588 pfn:0x123838 head:ffffea00048e0e00 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x17ffffc0000a40(workingset|slab|head|node=0|zone=2|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 0017ffffc0000a40 ffff88810588c200 ffffea00048ffa10 ffff888105889488 raw: ffff88812383f588 0000000000150006 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888123839d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888123839e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888123839e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888123839f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888123839f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 36eca8948323 ("block, bfq: add Early Queue Merge (EQM)") Signed-off-by: Yu Kuai Link: https://lore.kernel.org/r/20240902130329.3787024-2-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit c3026230d2907111a085fbe207985cfdf5fea1ea Author: Su Hui Date: Thu Sep 12 19:01:20 2024 +0800 net: tipc: avoid possible garbage value [ Upstream commit 99655a304e450baaae6b396cb942b9e47659d644 ] Clang static checker (scan-build) warning: net/tipc/bcast.c:305:4: The expression is an uninitialized value. The computed value will also be garbage [core.uninitialized.Assign] 305 | (*cong_link_cnt)++; | ^~~~~~~~~~~~~~~~~~ tipc_rcast_xmit() will increase cong_link_cnt's value, but cong_link_cnt is uninitialized. Although it won't really cause a problem, it's better to fix it. Fixes: dca4a17d24ee ("tipc: fix potential hanging after b/rcast changing") Signed-off-by: Su Hui Reviewed-by: Justin Stitt Link: https://patch.msgid.link/20240912110119.2025503-1-suhui@nfschina.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 309eb08b483b07bba2a78c8c839c483be46cef4f Author: Luiz Augusto von Dentz Date: Mon Sep 9 16:51:52 2024 -0400 Bluetooth: btusb: Fix not handling ZPL/short-transfer [ Upstream commit 7b05933340f4490ef5b09e84d644d12484b05fdf ] Requesting transfers of the exact same size of wMaxPacketSize may result in ZPL/short-transfer since the USB stack cannot handle it as we are limiting the buffer size to be the same as wMaxPacketSize. Also, in terms of throughput this change has the same effect to interrupt endpoint as 290ba200815f "Bluetooth: Improve USB driver throughput by increasing the frame size" had for the bulk endpoint, so users of the advertisement bearer (e.g. BT Mesh) may benefit from this change. Fixes: 5e23b923da03 ("[Bluetooth] Add generic driver for Bluetooth USB devices") Signed-off-by: Luiz Augusto von Dentz Tested-by: Kiran K Signed-off-by: Sasha Levin commit a833da8eec20b51af39643faa7067b25c8b20f3e Author: Kuniyuki Iwashima Date: Wed Sep 4 18:22:37 2024 -0700 can: bcm: Clear bo->bcm_proc_read after remove_proc_entry(). [ Upstream commit 94b0818fa63555a65f6ba107080659ea6bcca63e ] syzbot reported a warning in bcm_release(). [0] The blamed change fixed another warning that is triggered when connect() is issued again for a socket whose connect()ed device has been unregistered. However, if the socket is just close()d without the 2nd connect(), the remaining bo->bcm_proc_read triggers unnecessary remove_proc_entry() in bcm_release(). Let's clear bo->bcm_proc_read after remove_proc_entry() in bcm_notify(). [0] name '4986' WARNING: CPU: 0 PID: 5234 at fs/proc/generic.c:711 remove_proc_entry+0x2e7/0x5d0 fs/proc/generic.c:711 Modules linked in: CPU: 0 UID: 0 PID: 5234 Comm: syz-executor606 Not tainted 6.11.0-rc5-syzkaller-00178-g5517ae241919 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:remove_proc_entry+0x2e7/0x5d0 fs/proc/generic.c:711 Code: ff eb 05 e8 cb 1e 5e ff 48 8b 5c 24 10 48 c7 c7 e0 f7 aa 8e e8 2a 38 8e 09 90 48 c7 c7 60 3a 1b 8c 48 89 de e8 da 42 20 ff 90 <0f> 0b 90 90 48 8b 44 24 18 48 c7 44 24 40 0e 36 e0 45 49 c7 04 07 RSP: 0018:ffffc9000345fa20 EFLAGS: 00010246 RAX: 2a2d0aee2eb64600 RBX: ffff888032f1f548 RCX: ffff888029431e00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000345fb08 R08: ffffffff8155b2f2 R09: 1ffff1101710519a R10: dffffc0000000000 R11: ffffed101710519b R12: ffff888011d38640 R13: 0000000000000004 R14: 0000000000000000 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b8800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcfb52722f0 CR3: 000000000e734000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: bcm_release+0x250/0x880 net/can/bcm.c:1578 __sock_release net/socket.c:659 [inline] sock_close+0xbc/0x240 net/socket.c:1421 __fput+0x24a/0x8a0 fs/file_table.c:422 task_work_run+0x24f/0x310 kernel/task_work.c:228 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xa2f/0x27f0 kernel/exit.c:882 do_group_exit+0x207/0x2c0 kernel/exit.c:1031 __do_sys_exit_group kernel/exit.c:1042 [inline] __se_sys_exit_group kernel/exit.c:1040 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1040 x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fcfb51ee969 Code: Unable to access opcode bytes at 0x7fcfb51ee93f. RSP: 002b:00007ffce0109ca8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fcfb51ee969 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000001 RBP: 00007fcfb526f3b0 R08: ffffffffffffffb8 R09: 0000555500000000 R10: 0000555500000000 R11: 0000000000000246 R12: 00007fcfb526f3b0 R13: 0000000000000000 R14: 00007fcfb5271ee0 R15: 00007fcfb51bf160 Fixes: 76fe372ccb81 ("can: bcm: Remove proc entry when dev is unregistered.") Reported-by: syzbot+0532ac7a06fb1a03187e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=0532ac7a06fb1a03187e Tested-by: syzbot+0532ac7a06fb1a03187e@syzkaller.appspotmail.com Signed-off-by: Kuniyuki Iwashima Reviewed-by: Vincent Mailhol Link: https://patch.msgid.link/20240905012237.79683-1-kuniyu@amazon.com Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin commit bc05f6855642cff3c0eeb63060b35d8c4f8a851d Author: Eric Dumazet Date: Fri Sep 6 15:44:49 2024 +0000 sock_map: Add a cond_resched() in sock_hash_free() [ Upstream commit b1339be951ad31947ae19bc25cb08769bf255100 ] Several syzbot soft lockup reports all have in common sock_hash_free() If a map with a large number of buckets is destroyed, we need to yield the cpu when needed. Fixes: 75e68e5bf2c7 ("bpf, sockhash: Synchronize delete from bucket list on map free") Reported-by: syzbot Signed-off-by: Eric Dumazet Signed-off-by: Daniel Borkmann Acked-by: Martin KaFai Lau Acked-by: John Fastabend Link: https://lore.kernel.org/bpf/20240906154449.3742932-1-edumazet@google.com Signed-off-by: Sasha Levin commit 5a24cedc243ace5ed7c1016f52a7bfc8f5b07815 Author: Jiawei Ye Date: Thu Aug 29 08:17:09 2024 +0000 wifi: wilc1000: fix potential RCU dereference issue in wilc_parse_join_bss_param [ Upstream commit 6d7c6ae1efb1ff68bc01d79d94fdf0388f86cdd8 ] In the `wilc_parse_join_bss_param` function, the TSF field of the `ies` structure is accessed after the RCU read-side critical section is unlocked. According to RCU usage rules, this is illegal. Reusing this pointer can lead to unpredictable behavior, including accessing memory that has been updated or causing use-after-free issues. This possible bug was identified using a static analysis tool developed by myself, specifically designed to detect RCU-related issues. To address this, the TSF value is now stored in a local variable `ies_tsf` before the RCU lock is released. The `param->tsf_lo` field is then assigned using this local variable, ensuring that the TSF value is safely accessed. Fixes: 205c50306acf ("wifi: wilc1000: fix RCU usage in connect path") Signed-off-by: Jiawei Ye Reviewed-by: Alexis Lothoré Signed-off-by: Kalle Valo Link: https://patch.msgid.link/tencent_466225AA599BA49627FB26F707EE17BC5407@qq.com Signed-off-by: Sasha Levin commit 04f75f5bae33349283d6886901d9acd2f110c024 Author: Dmitry Antipov Date: Fri Sep 6 15:31:51 2024 +0300 wifi: mac80211: use two-phase skb reclamation in ieee80211_do_stop() [ Upstream commit 9d301de12da6e1bb069a9835c38359b8e8135121 ] Since '__dev_queue_xmit()' should be called with interrupts enabled, the following backtrace: ieee80211_do_stop() ... spin_lock_irqsave(&local->queue_stop_reason_lock, flags) ... ieee80211_free_txskb() ieee80211_report_used_skb() ieee80211_report_ack_skb() cfg80211_mgmt_tx_status_ext() nl80211_frame_tx_status() genlmsg_multicast_netns() genlmsg_multicast_netns_filtered() nlmsg_multicast_filtered() netlink_broadcast_filtered() do_one_broadcast() netlink_broadcast_deliver() __netlink_sendskb() netlink_deliver_tap() __netlink_deliver_tap_skb() dev_queue_xmit() __dev_queue_xmit() ; with IRQS disabled ... spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags) issues the warning (as reported by syzbot reproducer): WARNING: CPU: 2 PID: 5128 at kernel/softirq.c:362 __local_bh_enable_ip+0xc3/0x120 Fix this by implementing a two-phase skb reclamation in 'ieee80211_do_stop()', where actual work is performed outside of a section with interrupts disabled. Fixes: 5061b0c2b906 ("mac80211: cooperate more with network namespaces") Reported-by: syzbot+1a3986bbd3169c307819@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=1a3986bbd3169c307819 Signed-off-by: Dmitry Antipov Link: https://patch.msgid.link/20240906123151.351647-1-dmantipov@yandex.ru Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 73d2e264bd923627f7ee119e32020699e797db0f Author: Mathy Vanhoef Date: Thu Jul 23 14:01:53 2020 +0400 mac80211: parse radiotap header when selecting Tx queue [ Upstream commit cb17ed29a7a5fea8c9bf70e8a05757d71650e025 ] Already parse the radiotap header in ieee80211_monitor_select_queue. In a subsequent commit this will allow us to add a radiotap flag that influences the queue on which injected packets will be sent. This also fixes the incomplete validation of the injected frame in ieee80211_monitor_select_queue: currently an out of bounds memory access may occur in in the called function ieee80211_select_queue_80211 if the 802.11 header is too small. Note that in ieee80211_monitor_start_xmit the radiotap header is parsed again, which is necessairy because ieee80211_monitor_select_queue is not always called beforehand. Signed-off-by: Mathy Vanhoef Link: https://lore.kernel.org/r/20200723100153.31631-6-Mathy.Vanhoef@kuleuven.be Signed-off-by: Johannes Berg Stable-dep-of: 9d301de12da6 ("wifi: mac80211: use two-phase skb reclamation in ieee80211_do_stop()") Signed-off-by: Sasha Levin commit 7ce40a112106c07721029e31b78a88a3c3bcff4c Author: Dmitry Antipov Date: Mon Sep 9 12:08:06 2024 +0300 wifi: cfg80211: fix two more possible UBSAN-detected off-by-one errors [ Upstream commit 15ea13b1b1fbf6364d4cd568e65e4c8479632999 ] Although not reproduced in practice, these two cases may be considered by UBSAN as off-by-one errors. So fix them in the same way as in commit a26a5107bc52 ("wifi: cfg80211: fix UBSAN noise in cfg80211_wext_siwscan()"). Fixes: 807f8a8c3004 ("cfg80211/nl80211: add support for scheduled scans") Fixes: 5ba63533bbf6 ("cfg80211: fix alignment problem in scan request") Signed-off-by: Dmitry Antipov Link: https://patch.msgid.link/20240909090806.1091956-1-dmantipov@yandex.ru Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 7d38d0cea33350cb1cc232c7c9ca8663d7827325 Author: Dmitry Antipov Date: Thu Sep 5 18:04:00 2024 +0300 wifi: cfg80211: fix UBSAN noise in cfg80211_wext_siwscan() [ Upstream commit a26a5107bc52922cf5f67361e307ad66547b51c7 ] Looking at https://syzkaller.appspot.com/bug?extid=1a3986bbd3169c307819 and running reproducer with CONFIG_UBSAN_BOUNDS, I've noticed the following: [ T4985] UBSAN: array-index-out-of-bounds in net/wireless/scan.c:3479:25 [ T4985] index 164 is out of range for type 'struct ieee80211_channel *[]' <...skipped...> [ T4985] Call Trace: [ T4985] [ T4985] dump_stack_lvl+0x1c2/0x2a0 [ T4985] ? __pfx_dump_stack_lvl+0x10/0x10 [ T4985] ? __pfx__printk+0x10/0x10 [ T4985] __ubsan_handle_out_of_bounds+0x127/0x150 [ T4985] cfg80211_wext_siwscan+0x11a4/0x1260 <...the rest is not too useful...> Even if we do 'creq->n_channels = n_channels' before 'creq->ssids = (void *)&creq->channels[n_channels]', UBSAN treats the latter as off-by-one error. Fix this by using pointer arithmetic rather than an expression with explicit array indexing and use convenient 'struct_size()' to simplify the math here and in 'kzalloc()' above. Fixes: 5ba63533bbf6 ("cfg80211: fix alignment problem in scan request") Signed-off-by: Dmitry Antipov Reviewed-by: Kees Cook Link: https://patch.msgid.link/20240905150400.126386-1-dmantipov@yandex.ru [fix coding style for multi-line calculation] Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 05f663161447dd612fb9984a462cec59e30ac846 Author: Pablo Neira Ayuso Date: Tue Sep 3 01:06:58 2024 +0200 netfilter: nf_tables: reject expiration higher than timeout [ Upstream commit c0f38a8c60174368aed1d0f9965d733195f15033 ] Report ERANGE to userspace if user specifies an expiration larger than the timeout. Fixes: 8e1102d5a159 ("netfilter: nf_tables: support timeouts larger than 23 days") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit bd6b2e3a01fa9d2946c9c177f5368222326d97d4 Author: Pablo Neira Ayuso Date: Tue Sep 3 01:06:49 2024 +0200 netfilter: nf_tables: reject element expiration with no timeout [ Upstream commit d2dc429ecb4e79ad164028d965c00f689e6f6d06 ] If element timeout is unset and set provides no default timeout, the element expiration is silently ignored, reject this instead to let user know this is unsupported. Also prepare for supporting timeout that never expire, where zero timeout and expiration must be also rejected. Fixes: 8e1102d5a159 ("netfilter: nf_tables: support timeouts larger than 23 days") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 1f444ee91baa96be6230bdc04414e2c7285adc01 Author: Pablo Neira Ayuso Date: Tue Sep 3 01:06:41 2024 +0200 netfilter: nf_tables: elements with timeout below CONFIG_HZ never expire [ Upstream commit e0c47281723f301894c14e6f5cd5884fdfb813f9 ] Element timeout that is below CONFIG_HZ never expires because the timeout extension is not allocated given that nf_msecs_to_jiffies64() returns 0. Set timeout to the minimum value to honor timeout. Fixes: 8e1102d5a159 ("netfilter: nf_tables: support timeouts larger than 23 days") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 30e197f8bbd61ff5f406d30ccff7162f94de4727 Author: Zhang Changzhong Date: Thu Aug 29 20:48:23 2024 +0800 can: j1939: use correct function name in comment [ Upstream commit dc2ddcd136fe9b6196a7dd01f75f824beb02d43f ] The function j1939_cancel_all_active_sessions() was renamed to j1939_cancel_active_session() but name in comment wasn't updated. Signed-off-by: Zhang Changzhong Acked-by: Oleksij Rempel Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://patch.msgid.link/1724935703-44621-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin commit ac076cb0db5f4162daed156e6a8efc66c22cc026 Author: Olaf Hering Date: Tue Jul 30 10:58:13 2024 +0200 mount: handle OOM on mnt_warn_timestamp_expiry [ Upstream commit 4bcda1eaf184e308f07f9c61d3a535f9ce477ce8 ] If no page could be allocated, an error pointer was used as format string in pr_warn. Rearrange the code to return early in case of OOM. Also add a check for the return value of d_path. Fixes: f8b92ba67c5d ("mount: Add mount warning for impending timestamp expiry") Signed-off-by: Olaf Hering Link: https://lore.kernel.org/r/20240730085856.32385-1-olaf@aepfle.de [brauner: rewrite commit and commit message] Signed-off-by: Christian Brauner Signed-off-by: Sasha Levin commit c6c1e1356d27180ead809b81166cdaea935eaeb4 Author: Andy Shevchenko Date: Tue Mar 14 17:09:06 2023 +0200 fs/namespace: fnic: Switch to use %ptTd [ Upstream commit 74e60b8b2f0fe3702710e648a31725ee8224dbdf ] Use %ptTd instead of open-coded variant to print contents of time64_t type in human readable form. Signed-off-by: Andy Shevchenko Signed-off-by: Christian Brauner (Microsoft) Stable-dep-of: 4bcda1eaf184 ("mount: handle OOM on mnt_warn_timestamp_expiry") Signed-off-by: Sasha Levin commit 7e2e113f9474796a0f6fceeced535e94d9290fe8 Author: Anthony Iliopoulos Date: Tue Mar 22 14:39:22 2022 -0700 mount: warn only once about timestamp range expiration [ Upstream commit a128b054ce029554a4a52fc3abb8c1df8bafcaef ] Commit f8b92ba67c5d ("mount: Add mount warning for impending timestamp expiry") introduced a mount warning regarding filesystem timestamp limits, that is printed upon each writable mount or remount. This can result in a lot of unnecessary messages in the kernel log in setups where filesystems are being frequently remounted (or mounted multiple times). Avoid this by setting a superblock flag which indicates that the warning has been emitted at least once for any particular mount, as suggested in [1]. Link: https://lore.kernel.org/CAHk-=wim6VGnxQmjfK_tDg6fbHYKL4EFkmnTjVr9QnRqjDBAeA@mail.gmail.com/ [1] Link: https://lkml.kernel.org/r/20220119202934.26495-1-ailiop@suse.com Signed-off-by: Anthony Iliopoulos Reviewed-by: Christoph Hellwig Acked-by: Christian Brauner Reviewed-by: Darrick J. Wong Cc: Alexander Viro Cc: Deepa Dinamani Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Stable-dep-of: 4bcda1eaf184 ("mount: handle OOM on mnt_warn_timestamp_expiry") Signed-off-by: Sasha Levin commit 92738aab2f2441be056c89148157cffd58deabd0 Author: Christoph Hellwig Date: Fri Nov 5 13:36:58 2021 -0700 fs: explicitly unregister per-superblock BDIs [ Upstream commit 0b3ea0926afb8dde70cfab00316ae0a70b93a7cc ] Add a new SB_I_ flag to mark superblocks that have an ephemeral bdi associated with them, and unregister it when the superblock is shut down. Link: https://lkml.kernel.org/r/20211021124441.668816-4-hch@lst.de Signed-off-by: Christoph Hellwig Reviewed-by: Jan Kara Cc: Miquel Raynal Cc: Richard Weinberger Cc: Vignesh Raghavendra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Stable-dep-of: 4bcda1eaf184 ("mount: handle OOM on mnt_warn_timestamp_expiry") Signed-off-by: Sasha Levin commit 8f88812306b50d72f7b588af9c834586ef112611 Author: Toke Høiland-Jørgensen Date: Mon Aug 5 13:02:22 2024 +0200 wifi: ath9k: Remove error checks when creating debugfs entries [ Upstream commit f6ffe7f0184792c2f99aca6ae5b916683973d7d3 ] We should not be checking the return values from debugfs creation at all: the debugfs functions are designed to handle errors of previously called functions and just transparently abort the creation of debugfs entries when debugfs is disabled. If we check the return value and abort driver initialisation, we break the driver if debugfs is disabled (such as when booting with debugfs=off). Earlier versions of ath9k accidentally did the right thing by checking the return value, but only for NULL, not for IS_ERR(). This was "fixed" by the two commits referenced below, breaking ath9k with debugfs=off starting from the 6.6 kernel (as reported in the Bugzilla linked below). Restore functionality by just getting rid of the return value check entirely. Link: https://bugzilla.kernel.org/show_bug.cgi?id=219122 Fixes: 1e4134610d93 ("wifi: ath9k: use IS_ERR() with debugfs_create_dir()") Fixes: 6edb4ba6fb5b ("wifi: ath9k: fix parameter check in ath9k_init_debug()") Reported-by: Daniel Tobias Tested-by: Daniel Tobias Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: Kalle Valo Link: https://patch.msgid.link/20240805110225.19690-1-toke@toke.dk Signed-off-by: Sasha Levin commit dab22cf5b489f98a4193d5464034c2d1be98a616 Author: Minjie Du Date: Wed Jul 12 19:47:40 2023 +0800 wifi: ath9k: fix parameter check in ath9k_init_debug() [ Upstream commit 6edb4ba6fb5b946d112259f54f4657f82eb71e89 ] Make IS_ERR() judge the debugfs_create_dir() function return in ath9k_init_debug() Signed-off-by: Minjie Du Acked-by: Toke Høiland-Jørgensen Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230712114740.13226-1-duminjie@vivo.com Stable-dep-of: f6ffe7f01847 ("wifi: ath9k: Remove error checks when creating debugfs entries") Signed-off-by: Sasha Levin commit c2fbff12c6ba377d61973f61329e4c40d5984750 Author: Aleksandr Mishin Date: Wed Jul 31 01:53:39 2024 +0300 ACPI: PMIC: Remove unneeded check in tps68470_pmic_opregion_probe() [ Upstream commit 07442c46abad1d50ac82af5e0f9c5de2732c4592 ] In tps68470_pmic_opregion_probe() pointer 'dev' is compared to NULL which is useless. Fix this issue by removing unneeded check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: e13452ac3790 ("ACPI / PMIC: Add TI PMIC TPS68470 operation region driver") Suggested-by: Andy Shevchenko Signed-off-by: Aleksandr Mishin Reviewed-by: Sakari Ailus Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/20240730225339.13165-1-amishin@t-argos.ru [ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit fa652318887da530f2f9dbd9b0ea4a087d05ee12 Author: Edward Adam Davis Date: Sun Sep 8 17:17:41 2024 +0800 USB: usbtmc: prevent kernel-usb-infoleak commit 625fa77151f00c1bd00d34d60d6f2e710b3f9aad upstream. The syzbot reported a kernel-usb-infoleak in usbtmc_write, we need to clear the structure before filling fields. Fixes: 4ddc645f40e9 ("usb: usbtmc: Add ioctl for vendor specific write") Reported-and-tested-by: syzbot+9d34f80f841e948c3fdb@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=9d34f80f841e948c3fdb Signed-off-by: Edward Adam Davis Cc: stable Link: https://lore.kernel.org/r/tencent_9649AA6EC56EDECCA8A7D106C792D1C66B06@qq.com Signed-off-by: Greg Kroah-Hartman commit a6eb2a486c60ea1e288505ae50d20c6d3946d667 Author: Junhao Xie Date: Tue Sep 3 23:06:38 2024 +0800 USB: serial: pl2303: add device id for Macrosilicon MS3020 commit 7d47d22444bb7dc1b6d768904a22070ef35e1fc0 upstream. Add the device id for the Macrosilicon MS3020 which is a PL2303HXN based device. Signed-off-by: Junhao Xie Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 1f5e352b9088211fa5eb4e1639cd365f4f7d2f65 Author: Toke Høiland-Jørgensen Date: Thu Mar 7 13:03:35 2024 +0100 bpf: Fix DEVMAP_HASH overflow check on 32-bit arches commit 281d464a34f540de166cee74b723e97ac2515ec3 upstream. The devmap code allocates a number hash buckets equal to the next power of two of the max_entries value provided when creating the map. When rounding up to the next power of two, the 32-bit variable storing the number of buckets can overflow, and the code checks for overflow by checking if the truncated 32-bit value is equal to 0. However, on 32-bit arches the rounding up itself can overflow mid-way through, because it ends up doing a left-shift of 32 bits on an unsigned long value. If the size of an unsigned long is four bytes, this is undefined behaviour, so there is no guarantee that we'll end up with a nice and tidy 0-value at the end. Syzbot managed to turn this into a crash on arm32 by creating a DEVMAP_HASH with max_entries > 0x80000000 and then trying to update it. Fix this by moving the overflow check to before the rounding up operation. Fixes: 6f9d451ab1a3 ("xdp: Add devmap_hash map type for looking up devices by hashed index") Link: https://lore.kernel.org/r/000000000000ed666a0611af6818@google.com Reported-and-tested-by: syzbot+8cd36f6b65f3cafd400a@syzkaller.appspotmail.com Signed-off-by: Toke Høiland-Jørgensen Message-ID: <20240307120340.99577-2-toke@redhat.com> Signed-off-by: Alexei Starovoitov Signed-off-by: Pu Lehui Signed-off-by: Greg Kroah-Hartman commit 1b6de5e6575b56502665c65cf93b0ae6aa0f51ab Author: Florian Westphal Date: Tue Mar 26 11:18:41 2024 +0100 inet: inet_defrag: prevent sk release while still in use commit 18685451fc4e546fc0e718580d32df3c0e5c8272 upstream. ip_local_out() and other functions can pass skb->sk as function argument. If the skb is a fragment and reassembly happens before such function call returns, the sk must not be released. This affects skb fragments reassembled via netfilter or similar modules, e.g. openvswitch or ct_act.c, when run as part of tx pipeline. Eric Dumazet made an initial analysis of this bug. Quoting Eric: Calling ip_defrag() in output path is also implying skb_orphan(), which is buggy because output path relies on sk not disappearing. A relevant old patch about the issue was : 8282f27449bf ("inet: frag: Always orphan skbs inside ip_defrag()") [..] net/ipv4/ip_output.c depends on skb->sk being set, and probably to an inet socket, not an arbitrary one. If we orphan the packet in ipvlan, then downstream things like FQ packet scheduler will not work properly. We need to change ip_defrag() to only use skb_orphan() when really needed, ie whenever frag_list is going to be used. Eric suggested to stash sk in fragment queue and made an initial patch. However there is a problem with this: If skb is refragmented again right after, ip_do_fragment() will copy head->sk to the new fragments, and sets up destructor to sock_wfree. IOW, we have no choice but to fix up sk_wmem accouting to reflect the fully reassembled skb, else wmem will underflow. This change moves the orphan down into the core, to last possible moment. As ip_defrag_offset is aliased with sk_buff->sk member, we must move the offset into the FRAG_CB, else skb->sk gets clobbered. This allows to delay the orphaning long enough to learn if the skb has to be queued or if the skb is completing the reasm queue. In the former case, things work as before, skb is orphaned. This is safe because skb gets queued/stolen and won't continue past reasm engine. In the latter case, we will steal the skb->sk reference, reattach it to the head skb, and fix up wmem accouting when inet_frag inflates truesize. Fixes: 7026b1ddb6b8 ("netfilter: Pass socket pointer down through okfn().") Diagnosed-by: Eric Dumazet Reported-by: xingwei lee Reported-by: yue sun Reported-by: syzbot+e5167d7144a62715044c@syzkaller.appspotmail.com Signed-off-by: Florian Westphal Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20240326101845.30836-1-fw@strlen.de Signed-off-by: Paolo Abeni Signed-off-by: Saeed Mirzamohammadi Signed-off-by: Greg Kroah-Hartman commit 9ae2d8e75b741dbcb0da374753f972410e83b5f3 Author: Hagar Hemdan Date: Thu May 23 08:53:32 2024 +0000 gpio: prevent potential speculation leaks in gpio_device_get_desc() commit d795848ecce24a75dfd46481aee066ae6fe39775 upstream. Userspace may trigger a speculative read of an address outside the gpio descriptor array. Users can do that by calling gpio_ioctl() with an offset out of range. Offset is copied from user and then used as an array index to get the gpio descriptor without sanitization in gpio_device_get_desc(). This change ensures that the offset is sanitized by using array_index_nospec() to mitigate any possibility of speculative information leaks. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. Signed-off-by: Hagar Hemdan Link: https://lore.kernel.org/r/20240523085332.1801-1-hagarhem@amazon.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Hugo SIMELIERE Signed-off-by: Greg Kroah-Hartman commit e8f9c4af7af7e9e4cd09c0251c7936593147419f Author: Ferry Meng Date: Mon May 20 10:40:24 2024 +0800 ocfs2: strict bound check before memcmp in ocfs2_xattr_find_entry() [ Upstream commit af77c4fc1871847b528d58b7fdafb4aa1f6a9262 ] xattr in ocfs2 maybe 'non-indexed', which saved with additional space requested. It's better to check if the memory is out of bound before memcmp, although this possibility mainly comes from crafted poisonous images. Link: https://lkml.kernel.org/r/20240520024024.1976129-2-joseph.qi@linux.alibaba.com Signed-off-by: Ferry Meng Signed-off-by: Joseph Qi Reported-by: lei lu Reviewed-by: Joseph Qi Cc: Changwei Ge Cc: Gang He Cc: Joel Becker Cc: Jun Piao Cc: Junxiao Bi Cc: Mark Fasheh Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 60c0d36189bad58b1a8e69af8781d90009559ea1 Author: Ferry Meng Date: Mon May 20 10:40:23 2024 +0800 ocfs2: add bounds checking to ocfs2_xattr_find_entry() [ Upstream commit 9e3041fecdc8f78a5900c3aa51d3d756e73264d6 ] Add a paranoia check to make sure it doesn't stray beyond valid memory region containing ocfs2 xattr entries when scanning for a match. It will prevent out-of-bound access in case of crafted images. Link: https://lkml.kernel.org/r/20240520024024.1976129-1-joseph.qi@linux.alibaba.com Signed-off-by: Ferry Meng Signed-off-by: Joseph Qi Reported-by: lei lu Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Gang He Cc: Jun Piao Signed-off-by: Andrew Morton Stable-dep-of: af77c4fc1871 ("ocfs2: strict bound check before memcmp in ocfs2_xattr_find_entry()") Signed-off-by: Sasha Levin commit 71fbc5018d97321eef821594e566e0148f509131 Author: Michael Kelley Date: Wed Jun 5 19:55:59 2024 -0700 x86/hyperv: Set X86_FEATURE_TSC_KNOWN_FREQ when Hyper-V provides frequency [ Upstream commit 8fcc514809de41153b43ccbe1a0cdf7f72b78e7e ] A Linux guest on Hyper-V gets the TSC frequency from a synthetic MSR, if available. In this case, set X86_FEATURE_TSC_KNOWN_FREQ so that Linux doesn't unnecessarily do refined TSC calibration when setting up the TSC clocksource. With this change, a message such as this is no longer output during boot when the TSC is used as the clocksource: [ 1.115141] tsc: Refined TSC clocksource calibration: 2918.408 MHz Furthermore, the guest and host will have exactly the same view of the TSC frequency, which is important for features such as the TSC deadline timer that are emulated by the Hyper-V host. Signed-off-by: Michael Kelley Reviewed-by: Roman Kisel Link: https://lore.kernel.org/r/20240606025559.1631-1-mhklinux@outlook.com Signed-off-by: Wei Liu Message-ID: <20240606025559.1631-1-mhklinux@outlook.com> Signed-off-by: Sasha Levin commit a38644c146e9cee4a7644c839417f2820ac4ef3c Author: Liao Chen Date: Sat Aug 31 09:42:31 2024 +0000 spi: bcm63xx: Enable module autoloading [ Upstream commit 709df70a20e990d262c473ad9899314039e8ec82 ] Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Liao Chen Link: https://patch.msgid.link/20240831094231.795024-1-liaochen4@huawei.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 1ccc2b0f6c17eb49bcbd1ea5ae7c0bd890b7fb35 Author: hongchi.peng Date: Mon Aug 26 10:45:17 2024 +0800 drm: komeda: Fix an issue related to normalized zpos [ Upstream commit 258905cb9a6414be5c9ca4aa20ef855f8dc894d4 ] We use komeda_crtc_normalize_zpos to normalize zpos of affected planes to their blending zorder in CU. If there's only one slave plane in affected planes and its layer_split property is enabled, order++ for its split layer, so that when calculating the normalized_zpos of master planes, the split layer of the slave plane is included, but the max_slave_zorder does not include the split layer and keep zero because there's only one slave plane in affacted planes, although we actually use two slave layers in this commit. In most cases, this bug does not result in a commit failure, but assume the following situation: slave_layer 0: zpos = 0, layer split enabled, normalized_zpos = 0;(use slave_layer 2 as its split layer) master_layer 0: zpos = 2, layer_split enabled, normalized_zpos = 2;(use master_layer 2 as its split layer) master_layer 1: zpos = 4, normalized_zpos = 4; master_layer 3: zpos = 5, normalized_zpos = 5; kcrtc_st->max_slave_zorder = 0; When we use master_layer 3 as a input of CU in function komeda_compiz_set_input and check it with function komeda_component_check_input, the parameter idx is equal to normailzed_zpos minus max_slave_zorder, the value of idx is 5 and is euqal to CU's max_active_inputs, so that komeda_component_check_input returns a -EINVAL value. To fix the bug described above, when calculating the max_slave_zorder with the layer_split enabled, count the split layer in this calculation directly. Signed-off-by: hongchi.peng Acked-by: Liviu Dudau Signed-off-by: Liviu Dudau Link: https://patchwork.freedesktop.org/patch/msgid/20240826024517.3739-1-hongchi.peng@siengine.com Signed-off-by: Sasha Levin commit 79d978f254b88f6642c29a628d4beceb39cd30ae Author: Liao Chen Date: Mon Aug 26 08:49:23 2024 +0000 ASoC: tda7419: fix module autoloading [ Upstream commit 934b44589da9aa300201a00fe139c5c54f421563 ] Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Liao Chen Link: https://patch.msgid.link/20240826084924.368387-4-liaochen4@huawei.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 16c1e5d5228f26f120e12e6ca55c59c3a5e6dece Author: Emmanuel Grumbach Date: Sun Aug 25 19:17:04 2024 +0300 wifi: iwlwifi: mvm: don't wait for tx queues if firmware is dead [ Upstream commit 3a84454f5204718ca5b4ad2c1f0bf2031e2403d1 ] There is a WARNING in iwl_trans_wait_tx_queues_empty() (that was recently converted from just a message), that can be hit if we wait for TX queues to become empty after firmware died. Clearly, we can't expect anything from the firmware after it's declared dead. Don't call iwl_trans_wait_tx_queues_empty() in this case. While it could be a good idea to stop the flow earlier, the flush functions do some maintenance work that is not related to the firmware, so keep that part of the code running even when the firmware is not running. Signed-off-by: Emmanuel Grumbach Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20240825191257.a7cbd794cee9.I44a739fbd4ffcc46b83844dd1c7b2eb0c7b270f6@changeid [edit commit message] Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 5fa62c3fffa7731ee92a2167b7360d8274777d4d Author: Daniel Gabay Date: Sun Aug 25 19:17:06 2024 +0300 wifi: iwlwifi: mvm: fix iwl_mvm_max_scan_ie_fw_cmd_room() [ Upstream commit 916a5d9c5354c426220a0a6533a5e8ea1287d6ea ] Driver creates also the WFA TPC element, consider that in the calculation. Signed-off-by: Daniel Gabay Reviewed-by: Ilan Peer Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20240825191257.e710ce446b7f.I2715c6742e9c3d160e2ba41bc4b35de370d2ce34@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 9023ef9cbae30b83bca2cab67af817fa3c0dfe46 Author: Jacky Chou Date: Thu Aug 22 15:30:06 2024 +0800 net: ftgmac100: Ensure tx descriptor updates are visible [ Upstream commit 4186c8d9e6af57bab0687b299df10ebd47534a0a ] The driver must ensure TX descriptor updates are visible before updating TX pointer and TX clear pointer. This resolves TX hangs observed on AST2600 when running iperf3. Signed-off-by: Jacky Chou Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 33d60cd46e734d3ffcf4df0404583ea047362dbf Author: Mike Rapoport Date: Mon Jul 29 08:33:27 2024 +0300 microblaze: don't treat zero reserved memory regions as error [ Upstream commit 0075df288dd8a7abfe03b3766176c393063591dd ] Before commit 721f4a6526da ("mm/memblock: remove empty dummy entry") the check for non-zero of memblock.reserved.cnt in mmu_init() would always be true either because memblock.reserved.cnt is initialized to 1 or because there were memory reservations earlier. The removal of dummy empty entry in memblock caused this check to fail because now memblock.reserved.cnt is initialized to 0. Remove the check for non-zero of memblock.reserved.cnt because it's perfectly fine to have an empty memblock.reserved array that early in boot. Reported-by: Guenter Roeck Signed-off-by: Mike Rapoport Reviewed-by: Wei Yang Tested-by: Guenter Roeck Link: https://lore.kernel.org/r/20240729053327.4091459-1-rppt@kernel.org Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit f03b3fe7d76650144e07fc2e95e51e8143e2fd40 Author: Thomas Blocher Date: Wed Jul 31 01:16:26 2024 +0200 pinctrl: at91: make it work with current gpiolib [ Upstream commit 752f387faaae0ae2e84d3f496922524785e77d60 ] pinctrl-at91 currently does not support the gpio-groups devicetree property and has no pin-range. Because of this at91 gpios stopped working since patch commit 2ab73c6d8323fa1e ("gpio: Support GPIO controllers without pin-ranges") This was discussed in the patches commit fc328a7d1fcce263 ("gpio: Revert regression in sysfs-gpio (gpiolib.c)") commit 56e337f2cf132632 ("Revert "gpio: Revert regression in sysfs-gpio (gpiolib.c)"") As a workaround manually set pin-range via gpiochip_add_pin_range() until a) pinctrl-at91 is reworked to support devicetree gpio-groups b) another solution as mentioned in commit 56e337f2cf132632 ("Revert "gpio: Revert regression in sysfs-gpio (gpiolib.c)"") is found Signed-off-by: Thomas Blocher Link: https://lore.kernel.org/5b992862-355d-f0de-cd3d-ff99e67a4ff1@ek-dev.de Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin commit f7fe7300117844675e95c450f219a16e5f6e4b94 Author: Kailang Yang Date: Thu Aug 22 16:46:56 2024 +0800 ALSA: hda/realtek - FIxed ALC285 headphone no sound [ Upstream commit 1fa7b099d60ad64f559bd3b8e3f0d94b2e015514 ] Dell platform with ALC215 ALC285 ALC289 ALC225 ALC295 ALC299, plug headphone or headset. It had a chance to get no sound from headphone. Replace depop procedure will solve this issue. Signed-off-by: Kailang Yang Link: https://lore.kernel.org/d0de1b03fd174520945dde216d765223@realtek.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 950b8ce6b82bb71ce791a1803da68ef7e7800200 Author: Kailang Yang Date: Thu Aug 22 10:54:19 2024 +0800 ALSA: hda/realtek - Fixed ALC256 headphone no sound [ Upstream commit 9b82ff1362f50914c8292902e07be98a9f59d33d ] Dell platform, plug headphone or headset, it had a chance to get no sound from headphone. Replace depop procedure will solve this issue. Signed-off-by: Kailang Yang Link: https://lore.kernel.org/bb8e2de30d294dc287944efa0667685a@realtek.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 06064053e7c519273285f7d14c2784c409c1f09a Author: Hongbo Li Date: Wed Aug 21 14:19:54 2024 +0800 ASoC: allow module autoloading for table db1200_pids [ Upstream commit 0e9fdab1e8df490354562187cdbb8dec643eae2c ] Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from platform_device_id table. Signed-off-by: Hongbo Li Link: https://patch.msgid.link/20240821061955.2273782-2-lihongbo22@huawei.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 503e1d7cc88f9c85faf8253ff9b9be00425b22f4 Author: Masami Hiramatsu Date: Thu Oct 31 21:23:00 2019 +0900 selftests: breakpoints: Fix a typo of function name commit 5b06eeae52c02dd0d9bc8488275a1207d410870b upstream. Since commit 5821ba969511 ("selftests: Add test plan API to kselftest.h and adjust callers") accidentally introduced 'a' typo in the front of run_test() function, breakpoint_test_arm64.c became not able to be compiled. Remove the 'a' from arun_test(). Fixes: 5821ba969511 ("selftests: Add test plan API to kselftest.h and adjust callers") Reported-by: Jun Takahashi Signed-off-by: Masami Hiramatsu Cc: Kees Cook Reviewed-by: Kees Cook Signed-off-by: Shuah Khan Signed-off-by: Samasth Norway Ananda Signed-off-by: Greg Kroah-Hartman commit 2fdc7540a9ca22e025030034e1e6201dd3a760af Author: Krzysztof Kozlowski Date: Mon Sep 9 18:47:46 2024 +0200 soundwire: stream: Revert "soundwire: stream: fix programming slave ports for non-continous port maps" commit 233a95fd574fde1c375c486540a90304a2d2d49f upstream. This reverts commit ab8d66d132bc8f1992d3eb6cab8d32dda6733c84 because it breaks codecs using non-continuous masks in source and sink ports. The commit missed the point that port numbers are not used as indices for iterating over prop.sink_ports or prop.source_ports. Soundwire core and existing codecs expect that the array passed as prop.sink_ports and prop.source_ports is continuous. The port mask still might be non-continuous, but that's unrelated. Reported-by: Bard Liao Closes: https://lore.kernel.org/all/b6c75eee-761d-44c8-8413-2a5b34ee2f98@linux.intel.com/ Fixes: ab8d66d132bc ("soundwire: stream: fix programming slave ports for non-continous port maps") Acked-by: Bard Liao Reviewed-by: Charles Keepax Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski Tested-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20240909164746.136629-1-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman commit aa05db44db5f409f6d91c27b5737efb49fb45d9f Author: Han Xu Date: Wed Sep 11 16:11:45 2024 -0500 spi: nxp-fspi: fix the KASAN report out-of-bounds bug commit 2a8787c1cdc7be24fdd8953ecd1a8743a1006235 upstream. Change the memcpy length to fix the out-of-bounds issue when writing the data that is not 4 byte aligned to TX FIFO. To reproduce the issue, write 3 bytes data to NOR chip. dd if=3b of=/dev/mtd0 [ 36.926103] ================================================================== [ 36.933409] BUG: KASAN: slab-out-of-bounds in nxp_fspi_exec_op+0x26ec/0x2838 [ 36.940514] Read of size 4 at addr ffff00081037c2a0 by task dd/455 [ 36.946721] [ 36.948235] CPU: 3 UID: 0 PID: 455 Comm: dd Not tainted 6.11.0-rc5-gc7b0e37c8434 #1070 [ 36.956185] Hardware name: Freescale i.MX8QM MEK (DT) [ 36.961260] Call trace: [ 36.963723] dump_backtrace+0x90/0xe8 [ 36.967414] show_stack+0x18/0x24 [ 36.970749] dump_stack_lvl+0x78/0x90 [ 36.974451] print_report+0x114/0x5cc [ 36.978151] kasan_report+0xa4/0xf0 [ 36.981670] __asan_report_load_n_noabort+0x1c/0x28 [ 36.986587] nxp_fspi_exec_op+0x26ec/0x2838 [ 36.990800] spi_mem_exec_op+0x8ec/0xd30 [ 36.994762] spi_mem_no_dirmap_read+0x190/0x1e0 [ 36.999323] spi_mem_dirmap_write+0x238/0x32c [ 37.003710] spi_nor_write_data+0x220/0x374 [ 37.007932] spi_nor_write+0x110/0x2e8 [ 37.011711] mtd_write_oob_std+0x154/0x1f0 [ 37.015838] mtd_write_oob+0x104/0x1d0 [ 37.019617] mtd_write+0xb8/0x12c [ 37.022953] mtdchar_write+0x224/0x47c [ 37.026732] vfs_write+0x1e4/0x8c8 [ 37.030163] ksys_write+0xec/0x1d0 [ 37.033586] __arm64_sys_write+0x6c/0x9c [ 37.037539] invoke_syscall+0x6c/0x258 [ 37.041327] el0_svc_common.constprop.0+0x160/0x22c [ 37.046244] do_el0_svc+0x44/0x5c [ 37.049589] el0_svc+0x38/0x78 [ 37.052681] el0t_64_sync_handler+0x13c/0x158 [ 37.057077] el0t_64_sync+0x190/0x194 [ 37.060775] [ 37.062274] Allocated by task 455: [ 37.065701] kasan_save_stack+0x2c/0x54 [ 37.069570] kasan_save_track+0x20/0x3c [ 37.073438] kasan_save_alloc_info+0x40/0x54 [ 37.077736] __kasan_kmalloc+0xa0/0xb8 [ 37.081515] __kmalloc_noprof+0x158/0x2f8 [ 37.085563] mtd_kmalloc_up_to+0x120/0x154 [ 37.089690] mtdchar_write+0x130/0x47c [ 37.093469] vfs_write+0x1e4/0x8c8 [ 37.096901] ksys_write+0xec/0x1d0 [ 37.100332] __arm64_sys_write+0x6c/0x9c [ 37.104287] invoke_syscall+0x6c/0x258 [ 37.108064] el0_svc_common.constprop.0+0x160/0x22c [ 37.112972] do_el0_svc+0x44/0x5c [ 37.116319] el0_svc+0x38/0x78 [ 37.119401] el0t_64_sync_handler+0x13c/0x158 [ 37.123788] el0t_64_sync+0x190/0x194 [ 37.127474] [ 37.128977] The buggy address belongs to the object at ffff00081037c2a0 [ 37.128977] which belongs to the cache kmalloc-8 of size 8 [ 37.141177] The buggy address is located 0 bytes inside of [ 37.141177] allocated 3-byte region [ffff00081037c2a0, ffff00081037c2a3) [ 37.153465] [ 37.154971] The buggy address belongs to the physical page: [ 37.160559] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x89037c [ 37.168596] flags: 0xbfffe0000000000(node=0|zone=2|lastcpupid=0x1ffff) [ 37.175149] page_type: 0xfdffffff(slab) [ 37.179021] raw: 0bfffe0000000000 ffff000800002500 dead000000000122 0000000000000000 [ 37.186788] raw: 0000000000000000 0000000080800080 00000001fdffffff 0000000000000000 [ 37.194553] page dumped because: kasan: bad access detected [ 37.200144] [ 37.201647] Memory state around the buggy address: [ 37.206460] ffff00081037c180: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc [ 37.213701] ffff00081037c200: fa fc fc fc 05 fc fc fc 03 fc fc fc 02 fc fc fc [ 37.220946] >ffff00081037c280: 06 fc fc fc 03 fc fc fc fc fc fc fc fc fc fc fc [ 37.228186] ^ [ 37.232473] ffff00081037c300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 37.239718] ffff00081037c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 37.246962] ================================================================== [ 37.254394] Disabling lock debugging due to kernel taint 0+1 records in 0+1 records out 3 bytes copied, 0.335911 s, 0.0 kB/s Fixes: a5356aef6a90 ("spi: spi-mem: Add driver for NXP FlexSPI controller") Cc: stable@kernel.org Signed-off-by: Han Xu Link: https://patch.msgid.link/20240911211146.3337068-1-han.xu@nxp.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit dc43a096cfe65b5c32168313846c5cd135d08f1d Author: Sean Anderson Date: Tue Sep 10 10:31:44 2024 -0400 net: dpaa: Pad packets to ETH_ZLEN [ Upstream commit cbd7ec083413c6a2e0c326d49e24ec7d12c7a9e0 ] When sending packets under 60 bytes, up to three bytes of the buffer following the data may be leaked. Avoid this by extending all packets to ETH_ZLEN, ensuring nothing is leaked in the padding. This bug can be reproduced by running $ ping -s 11 destination Fixes: 9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet") Suggested-by: Eric Dumazet Signed-off-by: Sean Anderson Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20240910143144.1439910-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit cfb4552c0c37b126fdfa49246d9d919099bcc8df Author: Jacky Chou Date: Fri Sep 6 14:28:31 2024 +0800 net: ftgmac100: Enable TX interrupt to avoid TX timeout [ Upstream commit fef2843bb49f414d1523ca007d088071dee0e055 ] Currently, the driver only enables RX interrupt to handle RX packets and TX resources. Sometimes there is not RX traffic, so the TX resource needs to wait for RX interrupt to free. This situation will toggle the TX timeout watchdog when the MAC TX ring has no more resources to transmit packets. Therefore, enable TX interrupt to release TX resources at any time. When I am verifying iperf3 over UDP, the network hangs. Like the log below. root# iperf3 -c 192.168.100.100 -i1 -t10 -u -b0 Connecting to host 192.168.100.100, port 5201 [ 4] local 192.168.100.101 port 35773 connected to 192.168.100.100 port 5201 [ ID] Interval Transfer Bandwidth Total Datagrams [ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 20 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams [ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 0.000 ms 0/20 (0%) [ 4] Sent 20 datagrams iperf3: error - the server has terminated The network topology is FTGMAC connects directly to a PC. UDP does not need to wait for ACK, unlike TCP. Therefore, FTGMAC needs to enable TX interrupt to release TX resources instead of waiting for the RX interrupt. Fixes: 10cbd6407609 ("ftgmac100: Rework NAPI & interrupts handling") Signed-off-by: Jacky Chou Link: https://patch.msgid.link/20240906062831.2243399-1-jacky_chou@aspeedtech.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 453e69e1457cff85b6fe7c14bda3b30bc1caf173 Author: Shahar Shitrit Date: Sun Aug 11 13:56:13 2024 +0300 net/mlx5e: Add missing link modes to ptys2ethtool_map [ Upstream commit 7617d62cba4a8a3ff3ed3fda0171c43f135c142e ] Add MLX5E_1000BASE_T and MLX5E_100BASE_TX to the legacy modes in ptys2legacy_ethtool_table, since they were missing. Fixes: 665bc53969d7 ("net/mlx5e: Use new ethtool get/set link ksettings API") Signed-off-by: Shahar Shitrit Reviewed-by: Tariq Toukan Reviewed-by: Carolina Jubran Signed-off-by: Saeed Mahameed Signed-off-by: Sasha Levin commit 164df4ec5a16f352ad7626c7c8b5c4b95dd12097 Author: Jacob Keller Date: Wed Jul 31 09:55:55 2024 -0700 ice: fix accounting for filters shared by multiple VSIs [ Upstream commit e843cf7b34fe2e0c1afc55e1f3057375c9b77a14 ] When adding a switch filter (such as a MAC or VLAN filter), it is expected that the driver will detect the case where the filter already exists, and return -EEXIST. This is used by calling code such as ice_vc_add_mac_addr, and ice_vsi_add_vlan to avoid incrementing the accounting fields such as vsi->num_vlan or vf->num_mac. This logic works correctly for the case where only a single VSI has added a given switch filter. When a second VSI adds the same switch filter, the driver converts the existing filter from an ICE_FWD_TO_VSI filter into an ICE_FWD_TO_VSI_LIST filter. This saves switch resources, by ensuring that multiple VSIs can re-use the same filter. The ice_add_update_vsi_list() function is responsible for doing this conversion. When first converting a filter from the FWD_TO_VSI into FWD_TO_VSI_LIST, it checks if the VSI being added is the same as the existing rule's VSI. In such a case it returns -EEXIST. However, when the switch rule has already been converted to a FWD_TO_VSI_LIST, the logic is different. Adding a new VSI in this case just requires extending the VSI list entry. The logic for checking if the rule already exists in this case returns 0 instead of -EEXIST. This breaks the accounting logic mentioned above, so the counters for how many MAC and VLAN filters exist for a given VF or VSI no longer accurately reflect the actual count. This breaks other code which relies on these counts. In typical usage this primarily affects such filters generally shared by multiple VSIs such as VLAN 0, or broadcast and multicast MAC addresses. Fix this by correctly reporting -EEXIST in the case of adding the same VSI to a switch rule already converted to ICE_FWD_TO_VSI_LIST. Fixes: 9daf8208dd4d ("ice: Add support for switch filter programming") Signed-off-by: Jacob Keller Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin commit d5901c497526e54ca8392d61c68c0cbc9362e1d7 Author: Quentin Schulz Date: Wed Jul 31 13:05:29 2024 +0200 arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma commit 741f5ba7ccba5d7ae796dd11c320e28045524771 upstream. The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module eMMC and SPI flash powered-down initially (in fact it keeps the reset signal asserted). BIOS_DISABLE_OVERRIDE pin allows to override that signal so that eMMC and SPI can be used regardless of the state of the signal. Let's make this GPIO a hog so that it's reserved and locked in the proper state. At the same time, make sure the pin is reserved for the hog and cannot be requested by another node. Cc: stable@vger.kernel.org Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20240731-puma-emmc-6-v1-2-4e28eadf32d0@cherry.de Signed-off-by: Heiko Stuebner Signed-off-by: Greg Kroah-Hartman commit af8151c833413aef2e6d1b8491b2bbcbd66e19f4 Author: Anders Roxell Date: Mon Aug 5 11:22:34 2024 +0200 scripts: kconfig: merge_config: config files: add a trailing newline [ Upstream commit 33330bcf031818e60a816db0cfd3add9eecc3b28 ] When merging files without trailing newlines at the end of the file, two config fragments end up at the same row if file1.config doens't have a trailing newline at the end of the file. file1.config "CONFIG_1=y" file2.config "CONFIG_2=y" ./scripts/kconfig/merge_config.sh -m .config file1.config file2.config This will generate a .config looking like this. cat .config ... CONFIG_1=yCONFIG_2=y" Making sure so we add a newline at the end of every config file that is passed into the script. Signed-off-by: Anders Roxell Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin commit bd21d96484911829a3927d0afe49142131e2c4ee Author: Pawel Dembicki Date: Fri Aug 9 21:38:06 2024 +0200 net: phy: vitesse: repair vsc73xx autonegotiation [ Upstream commit de7a670f8defe4ed2115552ad23dea0f432f7be4 ] When the vsc73xx mdio bus work properly, the generic autonegotiation configuration works well. Reviewed-by: Linus Walleij Signed-off-by: Pawel Dembicki Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit ef2c4556a392174b5a3a9d3608ef9b499c2c20d0 Author: Moon Yeounsu Date: Wed Aug 7 19:07:21 2024 +0900 net: ethernet: use ip_hdrlen() instead of bit shift [ Upstream commit 9a039eeb71a42c8b13408a1976e300f3898e1be0 ] `ip_hdr(skb)->ihl << 2` is the same as `ip_hdrlen(skb)` Therefore, we should use a well-defined function not a bit shift to find the header length. It also compresses two lines to a single line. Signed-off-by: Moon Yeounsu Reviewed-by: Christophe JAILLET Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 11f5645c619419360797c601101e7e5366732d10 Author: Foster Snowhill Date: Tue Aug 6 19:28:09 2024 +0200 usbnet: ipheth: fix carrier detection in modes 1 and 4 [ Upstream commit 67927a1b255d883881be9467508e0af9a5e0be9d ] Apart from the standard "configurations", "interfaces" and "alternate interface settings" in USB, iOS devices also have a notion of "modes". In different modes, the device exposes a different set of available configurations. Depending on the iOS version, and depending on the current mode, the length and contents of the carrier state control message differs: * 1 byte (seen on iOS 4.2.1, 8.4): * 03: carrier off (mode 0) * 04: carrier on (mode 0) * 3 bytes (seen on iOS 10.3.4, 15.7.6): * 03 03 03: carrier off (mode 0) * 04 04 03: carrier on (mode 0) * 4 bytes (seen on iOS 16.5, 17.6): * 03 03 03 00: carrier off (mode 0) * 04 03 03 00: carrier off (mode 1) * 06 03 03 00: carrier off (mode 4) * 04 04 03 04: carrier on (mode 0 and 1) * 06 04 03 04: carrier on (mode 4) Before this change, the driver always used the first byte of the response to determine carrier state. From this larger sample, the first byte seems to indicate the number of available USB configurations in the current mode (with the exception of the default mode 0), and in some cases (namely mode 1 and 4) does not correlate with the carrier state. Previous logic erroneously counted `04 03 03 00` as "carrier on" and `06 04 03 04` as "carrier off" on iOS versions that support mode 1 and mode 4 respectively. Only modes 0, 1 and 4 expose the USB Ethernet interfaces necessary for the ipheth driver. Check the second byte of the control message where possible, and fall back to checking the first byte on older iOS versions. Signed-off-by: Foster Snowhill Tested-by: Georgi Valkov Signed-off-by: David S. Miller Signed-off-by: Sasha Levin