chrono::fea::ChBeamSectionCable Class Reference
Description
Simplified geometry for a 'cable' beam section in 3D, that is a beam without torsional stiffness and with circular section (i.e.same Ixx and Iyy properties).
This material can be shared between multiple beams.
#include <ChBeamSectionCable.h>
Inheritance diagram for chrono::fea::ChBeamSectionCable:
Collaboration diagram for chrono::fea::ChBeamSectionCable:
Public Member Functions | |
| void | SetArea (const double ma) |
| Set the cross sectional area A of the beam (m^2). | |
| double | GetArea () const |
| void | SetInertia (double ma) |
| Set the I moment of inertia of the beam (for flexion about y axis or z axis) Note: since this simple section assumes circular section, Iyy=Izz=I. | |
| double | GetInertia () const |
| void | SetDiameter (double diameter) |
| Shortcut: set Area and I inertia at once, given the diameter of the beam assumed with circular shape. | |
| void | SetDensity (double md) |
| Set the density of the beam (kg/m^3). | |
| double | GetDensity () const |
| void | SetYoungModulus (double mE) |
| Set E, the Young elastic modulus (N/m^2). | |
| double | GetYoungModulus () const |
| void | SetRayleighDamping (double mr) |
| Set the Rayleigh damping ratio r (as in: R = r * K ), to do: also mass-proportional term. | |
| double | GetRayleighDamping () |
| Public Member Functions inherited from chrono::fea::ChBeamSection | |
| void | SetDrawShape (std::shared_ptr< ChBeamSectionShape > mshape) |
| Set the graphical representation for this section. | |
| std::shared_ptr< ChBeamSectionShape > | GetDrawShape () const |
| Get the drawing shape of this section (i.e.a 2D profile used for drawing 3D tesselation and visualization) By default a thin square section, use SetDrawShape() to change it. | |
| void | SetDrawThickness (double thickness_y, double thickness_z) |
| Shortcut: adds a ChBeamSectionShapeRectangular for visualization as a centered rectangular beam, and sets its width/height. | |
| void | SetDrawCircularRadius (double draw_rad) |
| Shortcut: adds a ChBeamSectionShapeCircular for visualization as a centered circular beam, and sets its radius. | |
| void | SetCircular (bool ic) |
| OBSOLETE only for backward compability. | |
Public Attributes | |
| double | Area |
| double | I |
| double | E |
| double | density |
| double | rdamping |
The documentation for this class was generated from the following file:
- D:/W/B/src/chrono-9.0.1/src/chrono/fea/ChBeamSectionCable.h
