Fri Apr 22 17:03:39 CDT 1994 ./a1/hdsetup.tgz: Fixed a bug when adding X to an existing system. ./a2/ps.tgz: Made w show the hostnames of the machines users are logged in from ./n3/ppp.tgz: Added a patch to enable ppp to work with kernels >= 1.1.4 ./q1/diskq1: edited ./q1/kernel.tgz: Upgraded to version 1.1.8. Fixed a bug in sbpcd.c (#include , and added in the PPP patches. ./q1/maketag: edited ./q2/cdkern.log: "make config" log for cdkern.tgz. ./q2/cdkern.tgz: A 1.1.8 kernel with net, IDE, and non-SCSI CD-ROM support. ./q2/diskq2: edited ./q2/ftape.tgz: Recompiled to work with Linux 1.1.8. ./q2/idekern.log: "make config" log for idekern.tgz. ./q2/idekern.tgz: A 1.1.8 kernel with net and IDE support. ./q2/scsikern.log: "make config" log for scsikern.tgz. ./q2/scsikern.tgz: A 1.1.8 kernel with net, IDE, and SCSI drivers. -------------- Thu Apr 21 17:17:27 CDT 1994 Release of Slackware 1.2.0.3: ./a1/base.tgz: Upgraded to mtools 2.0.7. ./a1/diska1: edited. ./a1/etc.tgz: edited /etc/mtools. ./a1/sysvinit.tgz: made rc.* files derive hostname from /etc/HOSTNAME ./a2/diska2: edited ./a2/getty.tgz: Recompiled from new source + backspace patch. ./a2/ps.tgz: upgraded to procps-0.95 ./a2/util.tgz: Switched to bdflush version of the update daemon (This will be needed by some of the newer 1.1.x kernels) ./a3/diska3: edited ./a3/lpr.tgz: added /etc/services to allow lpr to work on machines without to TCP/IP package installed. ./a3/shlbsvga.tgz: Upgraded to libvga.so.1.1.3 (from SVGAlib 1.07) ./ap1/termbin.tgz: Upgraded with new patches for term 1.14 (adds tshutdown) ./ap1/termsrc.tgz: Upgraded with new patches for term 1.14 (adds tshutdown) ./ap2/diskap2: edited ./ap3/diskap3: edited ./d2/flex.tgz: added info pages ./d5/diskd5: edited ./d5/svgalib.tgz: Upgraded to SVGAlib 1.07 ./i1/diski1: edited ./i1/info1.tgz: Pruned out the duplicates, and uncompressed the rest so they'll work with 'info'. Compress them again if you like. ./i1/maketag: edited ./i1/tagfile: edited ./i1/tagfile.org: edited ./i2/diski2: edited ./i2/info2.tgz: Pruned out the duplicates, and uncompressed the rest. ./i2/install.end: moved from i3 (which was removed) On all of the rootdisks below, the following changes were made: -- Added InfoMagic's CD to the install menu. -- Made sure disks used the latest versions of route and bdflush. ./install/1_2meg/rootdisks/colrlite.gz ./install/1_2meg/rootdisks/tty12.gz ./install/1_44meg/rootdisks/color144.gz ./install/1_44meg/rootdisks/tty144.gz ./install/tape/tape144.gz ./install/umsdos/root144.gz ./install/umsdos/boot12.gz: This hadn't contained a UMSDOS compatible kernel before. Sorry about that! ./n1/netcfg.tgz: This no longer touches /etc/rc.d/rc.M, since that extracts the hostname and domainname from /etc/HOSTNAME. ./n1/tcpip.tgz: Changed a couple config files to extract the hostname from /etc/HOSTNAME, and stripped 2 binaries that needed it. ./n2/diskn2: edited ./n2/pine.tgz: Stripped in.imapd and pine. ./n3/cnews.tgz: Fixed a bug in the inews script. ./n3/diskn3: edited ./n3/trn.tgz: Upgraded to version 3.4.1. This has been compiled to use read news from a remote server via NNTP (set the NNTPSERVER variable), to use Overviews (recommended) or mthreads (a resource hog), and to extract the hostname from /etc/HOSTNAME for posting. ./xap1/diskxap1: edited ./xap1/tagfile.pat: edited -------------- Tue Apr 19 18:57:05 PDT 1994 ./install/fdomain: added 1.1.5 bootkernels with scsi (including new Future Domain) drivers. -------------- Fri Apr 15 15:54:02 CDT 1994 Here's the latest round of updates to bring us up to Slackware release 1.2.0.2: A special tax-day present for those in the USA... ;^) ./a1/diska1: edited ./a1/etc.tgz: More verbose /etc/mtools. ./a1/idekern.log: New "make config" log ./a1/idekern.tgz: Upgraded to 1.0.8, added parallel support. ./a1/lilo.tgz: Fixes to the generated /etc/lilo.conf for OS/2 and DOS. ./a1/scsikern.log: New "make config" log ./a1/scsikern.tgz: Upgraded to 1.0.8. ./a1/sysvinit.tgz: Changed rc.S to not request a reboot after a successful fix. ./a1/tagfile: Edited many tagfiles... some to add new software, but mostly to remove version numbers, since these really aren't a reliable source of the current versions included. If you need to know that info, the disk?? are kept current. ./a1/tagfile.org: edited. ./a2/util.tgz: Added some e2fs 0.5a utilities. ./a3/diska3: edited ./a3/e2fsbn.tgz: Upgraded from 0.5 to 0.5a. ./ap1/maketag: edited ./ap1/tagfile: edited ./ap1/tagfile.org: edited ./ap1/tagfile.pat: edited ./ap4/diskap4: edited ./ap4/ftape.tgz: Recompiled to use Linux 1.0.8 ./ap4/vim.tgz: New! ./d1/maketag: edited ./d1/tagfile: edited ./d1/tagfile.org: edited ./d4/diskd4: edited ./d4/kernel.tgz: Linux 1.0.8 kernel source. ./d5/svgalib.tgz: Made convfont chmod'ed 755. (Security hole in older svgalibs) ./e1/tagfile: edited ./e1/tagfile.org: edited ./e1/tagfile.pat: edited On all of the rootdisks below, the following changes were made: 1. New e2fsprogs 0.5a, and badblocks added. 2. mkswap is now 'mkswap -c' by default. ./install/1_2meg/rootdisks/colrlite.gz ./install/1_2meg/rootdisks/tty12.gz ./install/1_44meg/rootdisks/color144.gz ./install/1_44meg/rootdisks/tty144.gz ./install/tape/tape144.gz ./install/umsdos/root144.gz ./n1/tagfile: edited ./n1/tagfile.org: edited ./n1/tcpip.tgz: Fixed ypbind, added newly patched dip-337-uri. Return of the Q series! This will contain Alpha kernel images and source. ./q1/diskq1: new ./q1/kernel.tgz: Linux 1.1.2 kernel source ./q1/maketag: new ./q1/tagfile: new ./q2/cdkern.log: "make config" log ./q2/cdkern.tgz: Linux 1.1.2 with net+IDE+SCSI+non-SCSI CD drivers. ./q2/diskq2: new ./q2/ftape.tgz: Ftape modules for Linux 1.1.2. ./q2/idekern.log: "make config" log ./q2/idekern.tgz: Linux 1.1.2 with net+IDE drivers ./q2/install.end: new ./q2/scsikern.log: "make config" log ./q2/scsikern.tgz: Linux 1.1.2 with net+IDE+SCSI drivers ./x1/tagfile: edited ./x1/tagfile.org: edited ./x1/tagfile.pat: edited ------------- Sun Apr 10 18:02:30 PDT 1994 ./downgrad: 3 disks comprising a "downgrade" package for people that want to run libc-4.4.4 and GNU gcc 2.4.5. I don't plan to use this, but I've seen interest in libc-4.4.4 on the net. ------------- Tue Apr 5 12:08:08 PDT 1994 ./x1/x_mach32.tgz: I heard on the net that some of the people that had problems with the Mach32 server had solved them by simply re-linking a new server. So, here's a newly re-linked copy. If this doesn't do it, let me know. ------------- Mon Apr 4 18:26:43 PDT 1994 ./install/in2000/in2K_144.gz: changed the root device from /dev/fd0h1200 to /dev/fd0H1440. Sorry about that! If you don't want to download the new copy, this line allows the old in2K_144 to load the rootdisk (type at the bootkernel prompt): ramdisk root=/dev/fd0H1440 ------------- Mon Apr 4 16:29:48 PDT 1994 ./install/tape: new tape144 and README. This might work now :^) Thanks to Harald Koenig, who sent fixes. ------------- Sun Apr 3 18:09:15 PDT 1994 ./ap4/ftape.tgz: Recompiled ftape-0.9.10 using a patch that was recently posted. This seems to have cleared up the random I/O errors on write with this version, and now /dev/nftape works, so you can put multiple tar volumes on one tape. ./install/in2000: Contains some experimental new bootkernel disks for systems using the IN2000 SCSI interface. -------------- Fri Apr 1 03:50:37 CST 1994 All kinds of upgrades and bug fixes have been going on over the past few days. I suppose I should have bumped the version numbers, but I didn't. Let's call this 1.2.0.1 ;^) Thanks for the extensive bug reports everyone! (especially Andreas Klemm, who hit me with a *huge* list ;^) /UPGRADE-HOWTO: A new piece of documentation that explains how to upgrade existing Linux installations using the new pkgtool. ./install/1_2meg/rootdisks/colrlite.gz: Switched over to new cpkgtool. Fixed several other bugs, too. All of these new root-install disks can be used to cleanly upgrade your system using the method detailed in the new UPGRADE-HOWTO. ./install/1_2meg/rootdisks/tty12.gz: upgraded with new pkgtool, bug fixes. ./install/1_44meg/rootdisks/color144.gz: upgraded with new pkgtool, bug fixes. ./install/1_44meg/rootdisks/tty144.gz: upgraded with new pkgtool, bug fixes. ./install/tape/tape144.gz: upgraded with new pkgtool, bug fixes. This is still experimental. Quick survey - is anyone using this successfully (besides me)? ./install/umsdos/boot12.gz: New UMSDOS Linux 1.0 bootkernel for 1.2 meg. ./install/umsdos/boot144.gz: New UMSDOS Linux 1.0 bootkernel for 1.44 meg. ./install/umsdos/root144.gz: New UMSDOS Linux 1.0 root-install disk for Slackware 1.2.0.1. ./a1/base.tgz: chmod'ed 755 /bin/mtools. Removed some old duplicates. ./a1/devs.tgz: chmod'ed 666 /dev/fd* (some people may consider this a ./a1/etc.tgz: changed $HOME for uucp to /var/spool/uucppublic, and the $HOME for news to /usr/lib/news. security risk, so chmod them back to 660 if you don't want to give your users floppy drive access) ./a1/hdsetup.tgz: Upgraded to yet-another-version of pkgtool.tty and cpkgtool. This time I made changes to allow pkgtool to be run from the root-install disk. This will allow clean upgrades - first you use 'pkgtool' from the root-install disk to remove the old versions of any packages you wish to upgrade, and then you install the new ones with 'setup'. ./a1/lilo.tgz: Changes to the 'liloconfig' script: now it checks to make sure target devices exist, and warns the user that labels must be a single word. ./a2/bin.tgz: Removed some duplicated files. ./a2/ps.tgz: Removed duplicated X binaries. ./a2/util.tgz: Added some of the new e2fs debugging tools that wouldn't fit on disk A3. ./a3/e2fsbn.tgz: New e2fs 0.5 utilities. ./a3/diska3: edited ./d5/clisp.tgz: Added #!/bin/sh to beginning of clisp script. ./d5/f2c.tgz: f77 script fixed to properly pass optimizing options. ./n1/uucp.tgz: Should support both Taylor and HDB config files now (in any combination). Also includes a new patch from Ian Taylor. New sample files from Andreas Klemm. ./n1/netcfg.tgz: adds HOSTNAME correctly now. ./n1/mailx.tgz: New pathnames compiled in (/var/spool/mail, /usr/lib/sendmail) should work for either smail or sendmail. ./n1/diskn1: Notes that uucp works with both config types. ./n1/tcpip.tgz: Made another fix to /etc/ftpaccess, so that the server doesn't exit immediately by default. ./n2/elm.tgz: Moved the elm configuration and alias files from /usr/lib (where they overlapped with Smail files) to /var/lib/elm. This fixes the Elm bug where it crashes saying it can't malloc some huge amount of memory. ./n3/inn_pkg.tgz: Added directory /var/log. ./u1: ALL NEW! New UMSDOS-Linux kernels and utilities. (UMSDOS is a filesystem that lets you install Linux onto an existing DOS partition at a cost of slower disk access than with native Linux filesystems.) ./u2: ALL NEW! New prepatched Linux 1.0 + UMSDOS filesystem source. ./x2/xf_cfg.tgz: Edited system.fvwmrc to use new rxvt syntax. ./x4/diskx4: edited. ./x4/xf_bin.tgz: Upgraded to rxvt version 1.85. (including 'rclock') -------------- Thu Mar 31 18:27:55 CST 1994 ./n1/tcpip.tgz: fixed pathnames in /etc/ftpaccess, added /var/yp directory. -------------- Thu Mar 31 18:03:42 CST 1994 ./a1/hdsetup.tgz: Upgraded to a new version of 'pkgtool' that fixes the reported bugs, and speeds up package removal greatly. Thanks to Mark Wisdom, who suggested switching to the 'comm' utility (and sent diffs :^) ./a3/find.tgz: added /usr/local/lib/locate directory ./xap2/xxgdb.tgz: Recompiled to use the new multi window interface. -------------- Mon Mar 28 23:22:00 PST 1994 ./ap1/maketag: noted new version # for quota ./ap4/diskap4: noted new version # for quota ./ap4/quota.tgz: upgraded to quota-1.32. This should work with Linux 1.0. -------------- Mon Mar 28 16:04:28 PST 1994 ./ap1/maketag, tagfiles: added an entry for 'mt-st' ./ap4/diskap4: added an entry for 'mt-st' ./ap4/mt_st.tgz: A new version of mt that lets you set the blocksize of your tape drive and some other features that GNU mt lacks. It does not seem to work with a remote tape drive, however. Use the mt in cpio.tgz for that. ./install/tape/tape144.gz: Replaced the mt in /bin with the mt-st version. -------------- Mon Mar 28 11:54:58 PST 1994 ./n3/ppp.tgz: I recompiled the pppd binary. I think the package that was up before (with the 1.0 patches) should have worked, too, but I'm just making sure. If you had trouble getting it to work before, try this one. Just for reference, here's how I connect to another machine with PPP: pppd defroute 19200 192.11.11.11: /dev/ttyS2 -------------- Sat Mar 26 15:50:23 PST 1994 ./a1/lilo.tgz: Switched to a new LILO installation script that allows you to set up booting to other operating systems such as OS/2 or DOS. Let me know if you run into any problems with it. ./xv2/xvmenus.tgz: Fixed a bad link to usr/openwin/lib/.text_extras_menu. -------------- Fri Mar 25 20:18:54 PST 1994 ./a1/lilo.tgz: fixed the "chroot -m : not found" bug when running liloconfig on your installed system. -------------- Fri Mar 25 15:58:58 PST 1994 ./n3/ppp.tgz: Patched to work with the 1.0 kernel. ./install/tape: A root-install disk to install from floppy or SCSI tape. -------------- Thu Mar 24 22:36:06 PST 1994 ./n1/tcpip.tgz: Upgraded to net-032b utilities, added ytalk and yp stuff. ./n1/diskn1: Edited the description of tcpip. There were a couple of recent fixes to the XFree86 2.1 release, and they're now incorporated into the Slackware release. Here are the changes for that: ./x7/speedo.tgz: added new fonts.scale, fonts.dir. ./xd1/xf_kit.tgz: New contents. ./xd1/maketag: added 'xf_kit2' selection ./xd1/tagfile: added default for 'xf_kit2' ./xd1/tagfile.org: added default for 'xf_kit2' ./xd2/install.end: Moved to ./xd3 ./xd3/install.end: moved here from ./xd2 ./xd3/xf_kit2.tgz: new driver libraries ./xd3/diskxd3: new index file for the xd3 disk -------------- Thu Mar 24 11:23:44 PST 1994 ./a3/shellutl.tgz: So now I hear this is corrupt, check the checksum on it, and sure enough it is. I don't know what happened to these two files - I used the same upload method as usual with the exception that the files were uploaded from a DOS partition (under Linux, of course ;^) Anyway, it's fixed now, and I'll do a little more checking in the future. -------------- Thu Mar 24 10:54:24 PST 1994 ./a3/diska3: Looks like I got a ^M in there by mistake. Fixed. -------------- Wed Mar 23 15:28:39 PST 1994 ./a3/shellutl.tgz: Upgraded to 1.9.4. su fixed with a small patch. ./a3/diska3: Upgrade to shellutils-1.9.4 noted. -------------- Tue Mar 22 03:18:06 PST 1994 ./ap4/ftape.tgz: ftape-0.9.9d driver added in addition to the 0.9.10 driver. I heard reports that the 0.9.10 driver didn't work as well in general, so the 0.9.9d version is the new default. This is selectable via a link in /boot. ./ap4/diskap4: Noted the inclusion of the 0.9.9d driver in the ftape package. -------------- Sun Mar 20 22:36:51 PST 1994 ./a3/shellutl.tgz: GNU su wasn't working, so I replaced it with a version derived from FreeBSD source. This works better, but doesn't have all the nice options of the GNU version included with shellutils-1.9.2. If anyone gets that to work again, please let me know. --------------- Sun Mar 20 20:53:40 PST 1994 ./a1/hdsetup.tgz, colrlite.gz, color144.gz: Modified to use an 8-bit clean version of 'dialog'. --------------- Sun Mar 20 02:46:13 PST 1994 xap2: xgrabsc.tgz was archived relative to /usr instead of /. It's been fixed. --------------- Sat Mar 19 22:19:31 PST 1994 Slackware 1.2.0 is released. Sorry, I don't have a list of things which have changed since the last version. =============== Mon Feb 28 11:11:11 PST 1994 ./a2/bin.tgz: I got more than one report that this file was corrupt. I don't know if it was here, or a mirror site. If you had a previous copy and it did not give you errors when you installed it, then you don't need the new copy. --------------- Thu Feb 24 12:50:34 PST 1994 ./a2/getty.tgz : Fixed the LOGIN bug (I hope). ./d1/maketag: Bumped flex version number. ./d2/diskd2: Bumped flex version number. ./d2/flex.tgz: Upgraded to version 2.4.6 ---------------- Wed Feb 23 00:56:45 PST 1994 Replaced: ./a2/util.tgz: agetty was patched to (hopefully) cure the annoying backspace problem. ---------------- Fri Feb 18 23:36:23 PST 1994 ./a1/devs.tgz: I don't know if the net devices are needed for this new network stuff, but I'm taking no chances. ./d1/maketag: kernel version # changed ./d4/kernel.tgz: Upgraded to 0.99.15f ./d4/diskd4: Kernel version # changed ./n1/diskn1: tcpip entry edited ./n1/tcpip.tgz: net-032 utilities added ./bootdisk/color144.gz: Bug when selecting format with check on a non-root partition fixed. ----------------- Fri Feb 18 15:40:22 PST 1994 ./n2/smail.tgz: replaced. The old copy was linked with the shadow library and was causing problems on system using YP. ----------------- Wed Feb 16 19:29:08 PST 1994 I managed to put the wrong tty12.gz up... I hope you 5.25" users will be patient with me. I've replaced it with a copy I believe works. I'm doing some tests on it right now to double check. Wed Feb 16 14:09:36 PST 1994 I've replaced hdsetup.tgz, color144.gz, and root144.gz. This fixes a bug where the gateway address for NFS install is not configured. If you do not use NFS installation, these fixes won't affect you. Tue Feb 15 12:12:53 PST 1994 This is the promised big upgrade that fixes most of the reported problems with the new version of Slackware. Note that there is no longer a color12 disk - there wasn't enough room. I may eliminate some of the features and bring it back in the future. For instance, it would be easy to make a color12 without international keyboard support. (I know that wouldn't make everyone happy, but...) Another option is to make some more bootdisks that allow you to boot a 3.5" disk in the second floppy drive. Again, not everyone has a 1.44MB drive. But, rest assured that I'll do what I can. Anyway, these are the files that comprise the latest upgrade. If you downloaded soon after the initial 1.1.2 release, you should check the filesizes of your other disks as well and upgrade anything that needs it. (Including the disk?? maketag, and other seemingly insignificant files) NEW FEATURE: Support for the UMSDOS filesystem. That's right - if you have 8 megabytes or more of RAM, you can try Linux out on your DOS partition with *no repartitioning required*! You can install anything from a 12 megabyte minimal system to the full 140+ megabyte release. You can also make swapfiles on the UMSDOS partition once the system is running. I hope this will be a stable release. I've given it about 2 days testing, and it seems greatly improved, especially the new networking utilities. My thanks to everyone involved, especially Florian La Roche, Alan Cox, and (of course) Linus. Enjoy - Patrick Volkerding -rw-rw-r-- 1 volkerdi 232 Feb 15 12:10 u_README ./a1: -rw-r--r-- 1 volkerdi 55475 Feb 15 12:04 etc.tgz (added a couple bins) -rw-r--r-- 1 volkerdi 79197 Feb 15 12:04 hdsetup.tgz (bugfixes) -rw-r--r-- 1 volkerdi 25457 Feb 14 16:38 sysvinit.tgz (slight change) ./a2: -rw-r--r-- 1 volkerdi 554450 Feb 14 23:52 bin.tgz (removed dups) -rw-r--r-- 1 volkerdi 276670 Feb 14 16:39 util.tgz ./a3: -rw-r--r-- 1 volkerdi 4932 Feb 15 12:04 diska3 -rw-r--r-- 1 volkerdi 83064 Feb 15 12:04 keytbls.tgz (0.83 -> 0.84) -rw-r--r-- 1 volkerdi 50030 Feb 14 16:40 lpr.tgz (from new net stuff) -rw-r--r-- 1 volkerdi 82324 Feb 14 04:56 shellutl.tgz (+GNU su) ./ap1: -rw-r--r-- 1 volkerdi 1820 Feb 14 17:52 diskap1 -rw-r--r-- 1 volkerdi 1913 Feb 14 16:41 maketag -rw-r--r-- 1 volkerdi 44369 Feb 14 18:37 manpgs.tgz (1.0 -> 1.2) -rw-r--r-- 1 volkerdi 2773 Feb 14 18:16 tagfile -rw-r--r-- 1 volkerdi 2773 Feb 14 18:16 tagfile.org -rw-r--r-- 1 volkerdi 208 Feb 14 18:16 tagfile.pat -rw-r--r-- 1 volkerdi 41175 Feb 14 16:41 termbin.tgz (1.11 -> 1.12) -rw-r--r-- 1 volkerdi 96248 Feb 14 16:41 termsrc.tgz (1.11 -> 1.12) ./bootdisk/1_44meg: -rw-r--r-- 1 volkerdi 547130 Feb 15 12:04 color144.gz (bugfixes) ./bootdisk/umsdos: -rw-r--r-- 1 volkerdi 1574 Feb 14 20:51 README.UMS -rw-r--r-- 1 volkerdi 541472 Feb 13 19:53 umsboot.12.gz -rw-r--r-- 1 volkerdi 542624 Feb 13 19:23 umsboot.144.gz -rw-r--r-- 1 volkerdi 542529 Feb 15 12:05 umsroot.144.gz ./d1: -rw-r--r-- 1 volkerdi 268 Feb 14 17:54 tagfile.pat ./d2: -rw-r--r-- 1 volkerdi 1883 Feb 14 17:55 diskd2 -rw-r--r-- 1 volkerdi 134286 Feb 14 17:55 man2.tgz (1.0 -> 1.2) ./d5: -rw-r--r-- 1 volkerdi 196428 Feb 14 21:49 ncurses.tgz (new links) ./d6: -rw-r--r-- 1 volkerdi 1346 Feb 14 17:56 diskd6 -rw-r--r-- 1 volkerdi 151740 Feb 14 17:56 man3.tgz (1.0 -> 1.2) ./n1: -rw-r--r-- 1 volkerdi 32003 Feb 14 18:13 dip.tgz (3.34a -> 3.3.7n2debug) -rw-r--r-- 1 volkerdi 2464 Feb 14 18:13 diskn1 -rw-r--r-- 1 volkerdi 1637 Feb 14 21:50 maketag -rw-r--r-- 1 volkerdi 6335 Feb 14 23:16 netcfg.tgz -rw-r--r-- 1 volkerdi 2558 Feb 14 18:13 tagfile -rw-r--r-- 1 volkerdi 2558 Feb 14 18:13 tagfile.org -rw-r--r-- 1 volkerdi 156 Feb 14 18:13 tagfile.pat -rw-r--r-- 1 volkerdi 642276 Feb 14 18:13 tcpip.tgz (NEW! net2debugged) ./n3: -rw-r--r-- 1 volkerdi 945 Feb 14 18:14 diskn3 -rw-r--r-- 1 volkerdi 114372 Feb 14 23:55 ppp.tgz (NEW) ./t1: (New LaTeX2e distribution from Sunsite) -rw-r--r-- 1 volkerdi 124 Feb 14 20:06 diskt1 -rw-r--r-- 1 volkerdi 1144 Feb 14 20:04 maketag -rw-r--r-- 1 volkerdi 7153 Feb 12 10:05 manifest.gz -rw-r--r-- 1 volkerdi 2738 Feb 12 10:04 readme.tex -rw-r--r-- 1 volkerdi 129 Feb 14 20:19 tagfile -rw-r--r-- 1 volkerdi 129 Feb 14 20:19 tagfile.org -rw-r--r-- 1 volkerdi 129 Feb 14 20:19 tagfile.pat -rw-r--r-- 1 volkerdi 954152 Feb 14 19:03 texbin.tgz ./t2: -rw-r--r-- 1 volkerdi 154 Feb 14 20:07 diskt2 -rw-r--r-- 1 volkerdi 1061354 Feb 14 19:34 texlibmc.tgz ./t3: -rw-r--r-- 1 volkerdi 371 Feb 14 20:10 diskt3 -rw-r--r-- 1 volkerdi 692601 Feb 14 19:24 texcmpk.tgz -rw-r--r-- 1 volkerdi 80611 Feb 14 19:26 texdoc.tgz -rw-r--r-- 1 volkerdi 432212 Feb 14 19:43 texnfss2.tgz ./t4: -rw-r--r-- 1 volkerdi 395 Feb 14 20:12 diskt4 -rw-r--r-- 1 volkerdi 165314 Feb 14 19:22 texcm.tgz -rw-r--r-- 1 volkerdi 441104 Feb 14 19:31 texlibib.tgz -rw-r--r-- 1 volkerdi 519891 Feb 14 19:39 texlibms.tgz ./t5: -rw-r--r-- 1 volkerdi 237 Feb 14 20:17 diskt5 -rw-r--r-- 1 volkerdi 4 Feb 14 20:04 install.end -rw-r--r-- 1 volkerdi 397715 Feb 14 19:00 texams.tgz -rw-r--r-- 1 volkerdi 795531 Feb 14 19:28 texfont.tgz ./u1: (New UMSDOS support - allows installation on DOS partitions) -rw-r--r-- 1 volkerdi 557 Feb 14 15:45 disku1 -rw-r--r-- 1 volkerdi 279 Feb 14 18:32 readme.now -rw-r--r-- 1 volkerdi 51 Feb 14 18:33 tagfile -rw-r--r-- 1 volkerdi 2928 Feb 14 15:46 umsfix.tgz -rw-r--r-- 1 volkerdi 5919 Feb 13 20:05 umskern.log -rw-r--r-- 1 volkerdi 305617 Feb 13 19:58 umskern.tgz -rw-r--r-- 1 volkerdi 81066 Feb 14 18:40 umsprogs.tgz ./u2: -rw-r--r-- 1 volkerdi 329 Feb 13 20:08 disku2 -rw-r--r-- 1 volkerdi 16 Feb 13 20:08 install.end -rw-r--r-- 1 volkerdi 1297282 Feb 11 23:19 kernel.tgz ---------------- Sat Feb 12 16:49:00 PST 1994 Replaced: slackware/a2/ldso.tgz (added /usr/openwin/lib to ld.so.conf) slackware/d6/libgxx.tgz (Fixed release) ... more to come! :^) ---------------- Fri Feb 11 15:26:23 PST 1994 Added a new bootdisk with *only* scsi drivers. Removed the Mitsumi driver from scsiboot (scsi+net). Since this site can do gzip on-the-fly, I've removed the compressed versions of the bootdisks. This is also to benefit mirror sites that are running low on disk space. I'm considering compressing them all and adding GZIP.EXE to the bootdisk directory. If you think that's a bad plan, I'm open to suggestions. --------------- Thu Feb 10 17:29:04 PST 1994 Replaced: slackware/a1/etc.tgz Added a couple missing files, fixed problems with 'last' and 'finger'. ---------------- Wed Feb 9 23:20:45 PST 1994 Replaced: slackware/a1/sysvinit.tgz Changed rc.M so that it no longer deletes /etc/ld.so.cache now that the ld.so bug has been fixed. slackware/a2/ldso.tgz: Upgraded from 1.4 to 1.4.3. slackware/a2/diska2: Bumped ld.so version number in the text description. slackware/n1/netcfg.tgz: Fixed netconfig script to produce the changed version of rc.M. --------------- Wed Feb 9 11:42:49 PST 1994 Replaced: slackware/d1/maketag Wrong version numbers given. ---------------- Tue Feb 8 16:10:13 PST 1994 Replaced: slackware/a1/sysvinit.tgz slackware/libc444/a1/sysvinit.tgz slackware/n1/netcfg.tgz Execution of ldconfig moved to rc.M, after mounting of remote filesystems. Also, /etc/ld.so.cache is deleted after ldconfig is run. This is a temporary fix for an ld.so problem that should be repaired correctly soon. --------------- Tue Feb 8 01:50:03 PST 1994 Replaced (again): slackware/bootdisk/1_44meg/color144.gz and color144 slackware/bootdisk/1_2meg/color12.gz and color12 The NFS install had bugs. slackware/a1/hdsetup.tgz slackware/libc444/a1/hdsetup.tgz Same problem. slackware/a2/bin.tgz slackware/libc444/a2/bin.tgz Fixed problem of no color-ls after su. slackware/a2/util.tgz slackware/libc444/a2/bin.tgz Fixed problem of no su. I inadvertently left many of my own tagfiles in place as the default. tagfile and tagfile.org were replaced in these directories: slackware/ap1, slackware/n1, slackware/xap1, slackware/xd1, slackware/xv1 slackware/y1, slackware/libc444/d1 --------------- Mon Feb 7 23:13:06 PST 1994 Replaced: slackware/a1/hdsetup.tgz slackware/libc444/a1/hdsetup.tgz (added CD-ROM setup by default) slackware/ap1/maketag (updated quota version #) slackware/ap4/diskap4 (updated quota info) slackware/ap4/quota.tgz (new version 1.3 for pl15) slackware/xap1/workman.tgz (upgraded from version 1.1 to 1.2) --------------- Mon Feb 7 17:34:56 PST 1994 Replaced: slackware/bootdisk/1_44meg/color144.gz and color144 slackware/bootdisk/1_2meg/color12.gz and color12 There was a dialog box that was empty when installing to multiple Linux partitions. It meant to say 'here's what went to your /etc/fstab, do you want to add more Linux partition?' but it didn't quite work out that way. ;^) Also, the setup program did not detect the absence of Linux native partitions. This condition will now print an error screen. --------------- Sun Feb 6 18:53:26 PST 1994 There have been a couple of last minute fixes to Slackware 1.1.2: This upgrades bash to 1.13.5. It replaces slackware/a1/base.tgz. -rwxr-xr-x 1 volkerdi 252852 Feb 6 17:11 base.tgz (disk a1) These next two files replace the ones under slackware/bootdisk/1_44meg and slackware/bootdisk/1_2meg. They fix a bug which wrote /etc/rc.d/rc.local improperly so that keymaps would not load properly. -rw-r--r-- 1 volkerdi 465392 Feb 6 16:35 color12.gz -rw-r--r-- 1 volkerdi 539929 Feb 6 16:32 color144.gz This package addresses the same bug, and replaces slackware/a1/hdsetup.tgz and slackware/libc444/a1/hdsetup.tgz. -rwxr-xr-x 1 volkerdi 71152 Feb 6 16:36 hdsetup.tgz This replaces slackware/f1/maketag and rewords the message a little (as well as fixing a typo) : -rwxr-xr-x 1 volkerdi 291 Feb 6 17:45 maketag This adds a few new man pages. It replaces slackware/ap1/man.tgz -rwxr-xr-x 1 volkerdi 403715 Feb 6 17:08 man.tgz --------------------- Sat Feb 5 01:20:58 PST 1994 Slackware 1.1.2 is released, with a totally insufficient log of changes since 1.1.1 ;^) --------------------- Mon Jan 17 17:58:36 PST 1994 A1: devs.tgz edited. I removed the /dev/printer -> /tmp/.printer link which was confusing LILO. I don't even remember what it was supposed to fix, to be honest. --------------------- Sat Jan 1 19:03:16 PST 1994 On disk a2, in bootutls.tgz, 'mkfs' now works as expected. Sat Jan 1 10:49:07 PST 1994 Happy new year, everyone! Changed files: DISK A1: -rw-r--r-- 1 volkerdi 6351 Dec 31 16:33 devs.tgz (added /dev/arp) -rw-r--r-- 1 volkerdi 22867 Dec 31 16:33 etc.tgz (Some modifications to inittab) -rw-r--r-- 1 volkerdi 26525 Dec 31 16:34 sysvinit.tgz (Better init scripts) DISK A2: -rw-r--r-- 1 volkerdi 43349 Jan 1 11:01 bootutls.tgz (New mount/umount, fsck frontend) -rw-r--r-- 1 volkerdi 1818 Jan 1 12:48 diska2 -rw-r--r-- 1 volkerdi 187066 Jan 1 11:17 util.tgz (Upgraded to util-linux-1.1) DISK A3: -rw-r--r-- 1 volkerdi 16192 Jan 1 11:22 syslogd.tgz (Added a comment to syslogd.conf, explaining that you have to use TABS for your whitespace or the config file will not parse correctly) -------------- Sat Dec 18 20:52:18 PST 1993 A1: passwd.tgz: moved 'su' into bin so single-user could start properly. /shadowpwd: shadwpwd.tgz: moved 'su' into /bin. -------------- Sat Dec 18 11:38:02 PST 1993 D1: Fixed 'make/gmake' typo in tagfile and tagfile.org -------------- Thu Dec 16 22:59:15 PST 1993 D5: ncurses.tgz replaced. The previous version worked, but always produced trace output (tons of it). -------------- Thu Dec 16 18:00:09 PST 1993 A1: lilo.tgz replaced to fix some bugs in the 'liloconfig' script. N1: netcfg.tgz replaced to add more error checking on input. --------------- Thu Dec 16 01:29:18 PST 1993 XAP2: Obsolete 'linux.cf' template removed. (rm /usr/X11/lib/X11/config/linux.cf) --------------- Mon Dec 13 23:20:42 PST 1993 XAP1: seyon replaced to get rid of the -O2 bug. Hint: If you recompile seyon yourself some day, don't use optimization. At least not with libc.so.4.4.4. X2: xf_cfg replaced (made /dev/modem the default seyon device) XV2: xvmenus replaced (made /dev/modem the default seyon device) --------------- Mon Dec 13 18:00:31 PST 1993 XAP2: xgames and x3270 replaced. --------------- Sun Dec 12 23:42:56 CST 1993 Slackware Linux 1.1.1 released. --------------- [ This part of the file lists the changes since the first 1.1.1 beta release until the official 1.1.1 release. ] Sun Dec 12 23:40:18 CST 1993 Disk F1 brought up to date. Documentation rewritten to reflect changes. --------------- Sun Dec 12 03:15:08 PST 1993 This should do it for changes prior to the real release (now, how many times have I said that? ;^) The files below were added, and xrest.tgz (XAP2) was deleted. The files listed below are also present in new.tar, found in this directory, so if you get that, delete xrest.tgz, and untar it in your slackware directory you'll be up to date. Also, two new pieces of source were added, and these are not in the new.tar file: /pub/linux/slackware_source/drivers/ftape-0.9.8.tar.gz /pub/linux/slackware_source/a/syslogd/syslogdk1.0.tar.gz ./ a3/ a3/syslogd.tgz a3/diska3 a3/ksh.tgz n1/ n1/tcpip.tgz n1/netcfg.tgz a1/ a1/passwd.tgz a1/sysvinit.tgz xap1/ xap1/tagfile xap1/tagfile.org xap1/tagfile.pat xap2/ xap2/diskxap2 xap2/ghstview.tgz xap2/x3270.tgz xap2/xgames.tgz xap2/xspread.tgz xap2/xxgdb.tgz a2/ a2/bin.tgz oi1/ oi1/oilib.tgz -------------- Sat Dec 11 04:20:51 PST 1993 a1/ a1/sysvinit.tgz : fixed getty format in inittab a2/ a2/getty.tgz : recompiled getty/uugetty, added docs. n1/ n1/tcpip.tgz : fixed 'dip'. d3/ d3/extralib.tgz : libg.a -> libc.a link taken care of. q1/ q1/diskq1 : 0.99pl14c added, 0.99pl14a removed. q1/ide_14c.log q1/ide_14c.tgz q1/scsi_14c.log q1/scsi_14c.tgz q3/ q3/diskq3 q3/lx99p14c.tgz ---------- Fri Dec 10 02:09:03 PST 1993 These files have changed in what may be the last round of updates prior to the official release. (heh, heh, yeah, right! ;^) bootdisk/scripts/pkgtool bootdisk/1_44meg/uniboot.gz bootdisk/1_2meg/root12m.gz bootdisk/1_44meg/root144m.gz bootdisk/scripts/setup n1/ n1/diskn1 n1/netcfg.tgz n1/tagfile n1/tagfile.org n1/tagfile.pat n1/tcpip.tgz a1/ a1/devs.tgz a1/lilo.tgz a1/tagfile a1/tagfile.org a1/tagfile.pat a2/ a2/bin.tgz a2/diska2 a2/ps.tgz a2/util.tgz a3/ a3/ksh.tgz a3/select.tgz a3/zoneinfo.tgz ap1/ ap1/tagfile ap1/tagfile.org ap1/tagfile.pat ap4/ ap4/diskap4 ap4/quota.tgz ap4/workbone.tgz d4/ d4/diskd4 q3/lx99pl14a.tgz x2/ x2/xf_cfg.tgz xap1/ xap1/vgaset.tgz xap2/ xap2/xrest.tgz shadowpwd/ shadowpwd/shadwpwd.tgz shadowpwd/README Mon Dec 6 02:58:00 CST 1993 These bugs were reported (and fixed) in the beta so far: 1. The route works for dip, but not ethernet. [solution]: Use the old route. I replaced /sbin/route with the one I was using before and renamed the new one /sbin/route.dip. [affected package]: /n1/tcpip.tgz 2. The install script in bin.tgz makes a bad link that wipes out /usr/bin/chsh. This has also been fixed. [affected package]: /a2/bin.tgz