Rapid builds (Linux only) of a subset of BioC 3.24<BR>Report updated every 4 hours

Hostname	OS	Arch (*)	R version	Installed pkgs
teran2	Linux (Ubuntu 24.04.4 LTS)	x86_64	4.6.0 (2026-04-24) -- "Because it was There"	917
Click on any hostname to see more info about the system (e.g. compilers) () as reported by 'uname -p', except on Windows and Mac OS X*

CHECK results for phyloseq on teran2

To the developers/maintainers of the phyloseq package:
- Use the following Renviron settings to reproduce errors and warnings.
- If 'R CMD check' started to fail recently on the Linux builder(s) over a missing dependency, add the missing dependency to 'Suggests:' in your DESCRIPTION file. See Renviron.bioc for more information.

raw results

Summary

Package: phyloseq

Version: 1.57.0

Command: /home/rapidbuild/bbs-3.24-bioc-rapid/R/bin/R CMD check --install=check:phyloseq.install-out.txt --library=/home/rapidbuild/bbs-3.24-bioc-rapid/R/site-library --timings phyloseq_1.57.0.tar.gz

StartedAt: 2026-05-09 13:33:55 -0400 (Sat, 09 May 2026)

EndedAt: 2026-05-09 13:38:19 -0400 (Sat, 09 May 2026)

EllapsedTime: 263.8 seconds

RetCode: 0

Status: OK

CheckDir: phyloseq.Rcheck

Warnings: 0

Command output

##############################################################################
##############################################################################
###
### Running command:
###
###   /home/rapidbuild/bbs-3.24-bioc-rapid/R/bin/R CMD check --install=check:phyloseq.install-out.txt --library=/home/rapidbuild/bbs-3.24-bioc-rapid/R/site-library --timings phyloseq_1.57.0.tar.gz
###
##############################################################################
##############################################################################


* using log directory ‘/media/volume/teran2_disk/rapidbuild/bbs-3.24-bioc-rapid/meat/phyloseq.Rcheck’
* using R version 4.6.0 (2026-04-24)
* using platform: x86_64-pc-linux-gnu
* R was compiled by
    gcc (Ubuntu 13.3.0-6ubuntu2~24.04.1) 13.3.0
    GNU Fortran (Ubuntu 13.3.0-6ubuntu2~24.04.1) 13.3.0
* running under: Ubuntu 24.04.4 LTS
* using session charset: UTF-8
* current time: 2026-05-09 17:33:56 UTC
* checking for file ‘phyloseq/DESCRIPTION’ ... OK
* this is package ‘phyloseq’ version ‘1.57.0’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... OK
* checking if this is a source package ... OK
* checking if there is a namespace ... OK
* checking for hidden files and directories ... NOTE
Found the following hidden files and directories:
  .travis.yml
These were most likely included in error. See section ‘Package
structure’ in the ‘Writing R Extensions’ manual.
* checking for portable file names ... OK
* checking for sufficient/correct file permissions ... OK
* checking whether package ‘phyloseq’ can be installed ... OK
* checking installed package size ... OK
* checking package directory ... OK
* checking ‘build’ directory ... OK
* checking DESCRIPTION meta-information ... OK
* checking top-level files ... OK
* checking for left-over files ... OK
* checking index information ... OK
* checking package subdirectories ... OK
* checking code files for non-ASCII characters ... OK
* checking R files for syntax errors ... OK
* checking whether the package can be loaded ... OK
* checking whether the package can be loaded with stated dependencies ... OK
* checking whether the package can be unloaded cleanly ... OK
* checking whether the namespace can be loaded with stated dependencies ... OK
* checking whether the namespace can be unloaded cleanly ... OK
* checking loading without being on the library search path ... OK
* checking dependencies in R code ... OK
* checking S3 generic/method consistency ... OK
* checking replacement functions ... OK
* checking foreign function calls ... OK
* checking R code for possible problems ... OK
* checking Rd files ... OK
* checking Rd metadata ... OK
* checking Rd cross-references ... NOTE
Found the following Rd file(s) with Rd \link{} targets missing package
anchors:
  UniFrac-methods.Rd: foreach-package
  distance.Rd: designdist
  import_biom.Rd: foreach
  import_qiime_otu_tax.Rd: foreach-package
  import_uparse.Rd: data.table
  ordinate.Rd: cca, rda
  phyloseq.Rd: ape-package
  plot_bar.Rd: melt, ggplot, qplot
  plot_heatmap.Rd: log_trans, ggplot
  plot_net.Rd: igraph-package, ggplot, ggsave
  plot_network.Rd: ggplot
  plot_ordination.Rd: ggplot
  plot_richness.Rd: ggplot
  plot_scree.Rd: ggplot
  plot_tree.Rd: ape, ggplot, plot.phylo
  subset_ord_plot.Rd: ggplot
  tree_layout.Rd: data.table, ape-package
Please provide package anchors for all Rd \link{} targets not in the
package itself and the base packages.
* checking for missing documentation entries ... OK
* checking for code/documentation mismatches ... OK
* checking Rd \usage sections ... OK
* checking Rd contents ... OK
* checking for unstated dependencies in examples ... OK
* checking contents of ‘data’ directory ... OK
* checking data for non-ASCII characters ... OK
* checking data for ASCII and uncompressed saves ... OK
* checking installed files from ‘inst/doc’ ... OK
* checking files in ‘vignettes’ ... OK
* checking examples ... OK
* checking for unstated dependencies in ‘tests’ ... OK
* checking tests ...
  Running ‘testthat-phyloseq.R’
 OK
* checking for unstated dependencies in vignettes ... OK
* checking package vignettes ... OK
* checking re-building of vignette outputs ... OK
* checking PDF version of manual ... OK
* DONE

Status: 2 NOTEs
See
  ‘/media/volume/teran2_disk/rapidbuild/bbs-3.24-bioc-rapid/meat/phyloseq.Rcheck/00check.log’
for details.

Installation output

phyloseq.Rcheck/00install.out

##############################################################################
##############################################################################
###
### Running command:
###
###   /home/rapidbuild/bbs-3.24-bioc-rapid/R/bin/R CMD INSTALL phyloseq
###
##############################################################################
##############################################################################


* installing to library ‘/media/volume/teran2_disk/rapidbuild/bbs-3.24-bioc-rapid/R/site-library’
* installing *source* package ‘phyloseq’ ...
** this is package ‘phyloseq’ version ‘1.57.0’
** using staged installation
** R
** data
** inst
** byte-compile and prepare package for lazy loading
** help
*** installing help indices
** building package indices
** installing vignettes
** testing if installed package can be loaded from temporary location
** testing if installed package can be loaded from final location
** testing if installed package keeps a record of temporary installation path
* DONE (phyloseq)

Tests output

phyloseq.Rcheck/tests/testthat-phyloseq.Rout


R version 4.6.0 (2026-04-24) -- "Because it was There"
Copyright (C) 2026 The R Foundation for Statistical Computing
Platform: x86_64-pc-linux-gnu

R is free software and comes with ABSOLUTELY NO WARRANTY.
You are welcome to redistribute it under certain conditions.
Type 'license()' or 'licence()' for distribution details.

R is a collaborative project with many contributors.
Type 'contributors()' for more information and
'citation()' on how to cite R or R packages in publications.

Type 'demo()' for some demos, 'help()' for on-line help, or
'help.start()' for an HTML browser interface to help.
Type 'q()' to quit R.

> library("testthat")
> packageVersion("phyloseq")
[1] '1.57.0'
> # As suggested for opt-out option on testing by users, recommended by CRAN
> # http://adv-r.had.co.nz/Testing.html
> # Previously, best practice was to put all test files in inst/tests and ensure that R CMD check ran them by putting the following code in tests/test-all.R:  
> # library(testthat)
> # library(yourpackage)
> # test_package("yourpackage")
> # Now, recommended practice is to put your tests in tests/testthat, and ensure R CMD check runs them by putting the following code in tests/test-all.R:
> # library(testthat)
> # test_check("yourpackage")
> # The advantage of this new structure is that the user has control over whether or not tests are installed using the –install-tests parameter to R CMD install, or INSTALL_opts = c(“–install-tests”) argument to install.packages(). I’m not sure why you wouldn’t want to install the tests, but now you have the flexibility as requested by CRAN maintainers.
> test_check("phyloseq")
Loading required package: phyloseq
Found biom-format file, now parsing it... 
Done parsing biom... 
Importing Sample Metdadata from mapping file...
Merging the imported objects... 
Successfully merged, phyloseq-class created. 
 Returning... 
Found biom-format file, now parsing it... 
Done parsing biom... 
Importing Sample Metdadata from mapping file...
Merging the imported objects... 
Successfully merged, phyloseq-class created. 
 Returning... 
Reading `ucfile` into memory and parsing into table 
Initially read 100 entries. 
... Now removing unassigned OTUs (* or NA)... 
Removed 7 entries that had no OTU assignment. 
A total of 93 will be assigned to the OTU table.
Processing otu/tax file...
Reading file into memory prior to parsing...
Detecting first header line...
Header is on line 2  
Converting input file to a table...
Defining OTU table... 
Parsing taxonomy table...
Processing phylogenetic tree...
 /media/volume/teran2_disk/rapidbuild/bbs-3.24-bioc-rapid/R/site-library/phyloseq/extdata/GP_tree_rand_short.newick.gz ...
Processing map file...
Processing otu/tax file...
Reading file into memory prior to parsing...
Detecting first header line...
Header is on line 2  
Converting input file to a table...
Defining OTU table... 
Parsing taxonomy table...
Processing phylogenetic tree...
 /media/volume/teran2_disk/rapidbuild/bbs-3.24-bioc-rapid/R/site-library/phyloseq/extdata/GP_tree_rand_short.newick.gz ...
Processing Reference Sequences...
[ FAIL 0 | WARN 2 | SKIP 0 | PASS 604 ]

[ FAIL 0 | WARN 2 | SKIP 0 | PASS 604 ]
> 
> proc.time()
   user  system elapsed 
 41.887   0.957  42.822

Example timings

phyloseq.Rcheck/phyloseq-Ex.timings

name	user	system	elapsed
DPCoA	1.578	0.151	1.728
JSD	0	0	0
UniFrac-methods	0.055	0.001	0.055
access	0	0	0
assign-otu_table	0	0	0
assign-phy_tree	0.021	0.001	0.022
assign-sample_data	0.057	0.002	0.059
assign-sample_names	0.004	0.001	0.005
assign-tax_table	0.000	0.000	0.001
assign-taxa_are_rows	0.002	0.000	0.001
assign-taxa_names	0.003	0.001	0.003
build_tax_table	0.005	0.001	0.006
capscale-phyloseq-methods	0.883	0.018	0.901
cca-rda-phyloseq-methods	0	0	0
chunkReOrder	0	0	0
data-GlobalPatterns	1.129	0.008	1.137
data-enterotype	0.566	0.009	0.576
data-esophagus	0.291	0.002	0.299
data-soilrep	0.587	0.045	0.631
distance	0.118	0.012	0.372
distanceMethodList	0.000	0.000	0.001
envHash2otu_table	0	0	0
estimate_richness	0.014	0.000	0.014
export_env_file	0	0	0
export_mothur_dist	0.026	0.004	0.030
extract-methods	0.022	0.000	0.022
filter_taxa	0.737	0.008	0.745
filterfun_sample	0.009	0.000	0.010
gapstat_ord	1.521	0.007	1.529
genefilter_sample-methods	0.000	0.000	0.001
get.component.classes	0	0	0
get_sample-methods	0.002	0.001	0.002
get_taxa-methods	0.002	0.000	0.001
get_taxa_unique	0.132	0.008	0.140
get_variable	0.091	0.010	0.101
getslots.phyloseq	0.099	0.008	0.107
import	0	0	0
import_RDP_otu	0.181	0.007	0.191
import_biom	0.073	0.004	0.081
import_env_file	0	0	0
import_mothur	0	0	0
import_mothur_dist	0	0	0
import_pyrotagger_tab	0	0	0
import_qiime	0.777	0.003	0.785
import_qiime_otu_tax	0.742	0.021	0.764
import_qiime_sample_data	0.007	0.000	0.007
import_uparse	0	0	0
import_usearch_uc	0.010	0.000	0.012
index_reorder	0.000	0.000	0.001
intersect_taxa	0	0	0
make_network	0.940	0.006	0.947
merge_phyloseq	0	0	0
merge_phyloseq_pair-methods	0.000	0.000	0.001
merge_samples-methods	0.361	0.016	0.378
merge_taxa-methods	0.029	0.000	0.031
microbio_me_qiime	0.313	0.005	0.325
mt-methods	0.924	0.001	0.925
nodeplotblank	0.296	0.000	0.279
nodeplotboot	0.001	0.000	0.001
nodeplotdefault	0	0	0
nsamples-methods	0.013	0.000	0.013
ntaxa-methods	0.002	0.000	0.003
ordinate	0	0	0
otu_table-methods	0	0	0
parseTaxonomy-functions	0.001	0.000	0.001
phy_tree-methods	0.101	0.004	0.105
phyloseq	0.012	0.001	0.013
phyloseq_to_deseq2	3.079	0.083	3.164
phyloseq_to_metagenomeSeq	1.365	0.022	1.387
plot_bar	1.093	0.165	1.258
plot_clusgap	1.598	0.044	1.646
plot_heatmap	2.005	0.004	2.010
plot_net	2.113	0.007	2.024
plot_network	0.806	0.007	0.813
plot_ordination	1.230	0.004	1.235
plot_phyloseq-methods	0.170	0.001	0.164
plot_richness	2.084	0.035	2.119
plot_scree	1.069	0.007	1.076
plot_tree	0.434	0.001	0.419
prune_samples-methods	0.236	0.024	0.260
prune_taxa-methods	0.021	0.003	0.024
psmelt	0.416	0.009	0.426
rank_names	0.017	0.000	0.017
rarefy_even_depth	0.041	0.002	0.043
read_tree	0.007	0.002	0.010
read_tree_greengenes	0.005	0.000	0.007
reconcile_categories	0	0	0
refseq-methods	0.095	0.008	0.103
rm_outlierf	0.009	0.000	0.010
sample_data-methods	0.032	0.002	0.034
sample_names-methods	0.001	0.000	0.001
sample_sums	0.018	0.001	0.019
sample_variables	0.015	0.001	0.016
show-methods	0	0	0
splat.phyloseq.objects	0	0	0
subset_ord_plot	0	0	0
subset_samples-methods	0	0	0
subset_taxa-methods	0.001	0.000	0.000
tax_glom	0	0	0
tax_table-methods	0	0	0
taxa_names-methods	0.012	0.000	0.011
taxa_sums	0.020	0.001	0.021
threshrank	0.869	0.392	1.261
threshrankfun	0.029	0.001	0.030
tip_glom	0.492	0.001	0.460
topf	0.007	0.000	0.007
topk	0.006	0.000	0.006
topp	0.005	0.001	0.006
transformcounts	0.048	0.001	0.050
transpose-methods	0.287	0.279	0.566
tree_layout	0.474	0.001	0.446